PX9011-01
PX9011-02
PX9011-06PX9011-03
PX9000-17
PX9000-18 PX9000-24
PX9011-04
PX9011-05
PX9000-30A
PX9002E Car Boay
PX9000-34A
PX9000-27
PX9000-27
PX9011-04
PX9000-18
PX9011-01
PX9000-29
P88071
P88049
P88052A
P88070
P88070
P88069
P88049
P88049
P88056
P88056
PX9000-25B
PX9011-03
PX9011-05
PX9011-02
PX9011-06
PX9011-16
PX9000-31
PX9000-23
PX9000-17
PX9000-24
PX9000-24
PX9000-28
PX9000-33
P88059
PX9000-33A
Brushless
A
P88055
P88069
P88069
P88069
P88058
P88058
R-Shaped Buckle
3*4*20 Screw
3*12*8 Pwb belt adapter
2.6*10*6 Pwb belt adapter
PX9000-34A PX9000-34B
Brushless ESC ESC
PX9000-23
PX9000-28
PX9000-36
PX9000-41 PX9000-43
PX9000-36A PX9000-37 PX9000-39
PX9000-29
PX9000-31 PX9000-26
390 Motor
PX9000-26A
340*255*200MM
340*245*130MM
1.7KGS
210MM
85MM
390 Motor
7.4V -1500MAH LI-ION Battery
Front Bumper
Tire
Servo
7.4V-LI-ION BATTERY
ESC
Motor
INTRODUCTION TO THE REMOTE
CONTROL FUNCTION PANEL
Remote Battery:
1.Push the battery cover out.
2.Insert 4 X1.5V AA batteries
( not included )in the correct direction.
3.Push the battery cover in.
If the remote will not be used for a long time, make sure
to turn it off and remove the batteries.When the battery
of the remote control is low, the indicator light of the
remote control will flash slowly.
Slide open the battery cover and installthe
battery as sho'wn in the picture.
Battery
compartment
Function
Panel
1
2
3
4
8 9
5
6
7
ʒ9::8/3
ʓ:.8':+
ʔ9:8':+
ʕ 2+*545,,
ʖ /4*/)':582'36
ʗ 2+*35*+
ʘ ,8+7;+4)?
/4*/)':582'36
ʙ 9:48
ʚ :.48
ʛ 545,,
lf while the car is moving forward and veering to left then turn the steering
trim konb to the right until the car ismoving straight. lf while the car is
moving forward and veering to right then turn the steering trim konb to
theleft until the car is moving straight.
lTurn the speed switch clockwiseto
increase the maximum speedof the
car.
Turn the speed switch
counterclockwise to reduce
the maximumspeed of the
car.
lf w
tri
mo
① Make sure the battery is charged.
② Insert batteries to the car and the remote.
③ Turn on the remote power switch, then press and hold the car
power switch to turn on the car.
（DO NOT pull the throttle trigger during pairing）
④
Both will automatically pair. ( The remote power indicator and the
car power indicator will flash
while waiting for the pairing process and will turn solid once pairing has been
successful )
