User Manual
1、 The left button controls the light's on and off, while the right button cycles
through color temperature shortcuts: 3000K–5000K–6500K.
2、 These two buttons represent color temperature, indicating a decrease and
an increase in color temperature respectively.
3、 ，These two buttons represent the power of the lamp, allowing you to adjust
the increase and decrease of the power respectively.
4、 Press this button, regardless of whether the lamp is on or off, when you press the
button, the lamp will return to its maximum power and the highest color temperature.
5、 These three buttons: 1H indicates that the light will automatically turn off
after 1 hour of the set time; 4H means it will turn off after 4 hours of the set time; 8H means it will
turn off after 8 hours of the set time.
6、 These two indicate the cancellation of functions.
7、Pairing: Press and hold for a long time before powering on. ；Disassembly: Press and
hold for a long time before powering on.
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to thefollowing two
conditions:
1) This device may not cause interference.
2) This device must accept any interference, including interference that may causeundesired
operation of the device.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in particular installation, lf this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
