SWIFT
TM
EASYCARE
01
·This product is not intended for use by people (including children) with reduced physical, sensory, or mental capabilities,
or lack of experience, unless supervised or instructed by a person responsible for their safety.
·Children should be supervised to ensure that they do not play with the product.
·Do not disassemble, open or modify the product.
·Do not expose products to heat sources or flames.
·Do not store in direct sunlight.
·Do not subject the product to mechanical shock or impact.
·If the battery leaks, avoid making the leaked liquid come into contact with your skin or eyes. In case of contact, rinse the
affected area with a large amount of water and seek medical help promptly.
·The battery performs best at room temperature (��°C ± �°C).
·Save the original instructions for future reference.
·Dispose of the battery properly. Before disposing of the product, the battery must be removed from the product by a
professional and disposed of safely.
·Dispose of the battery pack properly and in an environmentally friendly way. Ensure the device is powered off before
removing the battery pack.
·The main unit is rated IPX�. The brush head is submersible. For long-term performance, store the product in a dry
environment.
·When cleaning the plastic parts of the brush body, avoid rubbing it against hard surfaces to prevent scratches.
·Different brush heads are designed for different surfaces. Please refer to the manual to avoid incorrect use.
·Keep loose hair away from the rotating brush head during use to prevent tangling.
·Avoid using strong acidic or alkaline detergents during use, as they may cause the product to crack or become damaged.
�� Safety Instructions
02
�� Product Introduction
1
Lanyard
Extension pole
Spin scrubber main unit
Non-slip grip
Connecting tube
2
3
8
USB-C® charging port*
Power & Mode button
LED indicator light
9
10
4
5
Connecting tube connector
Connecting tube slide lock
6
Main unit slide lock
Main unit connector
7
1
2
3
4
5
6
7
8
9
10
*USB Type-C® and USB-C® are registered
trademarks of USB Implementers Forum.
03
Brush heads
Suitable for large surfaces, from
tile walls to floors, indoors and
outdoors.
Large flat brush
Suitable for cleaning dirt in
corners, gaps and grooves of sinks
and faucets.
*This product has strong scrubbing
power. Avoid using it on easily scratched
surfaces such as polished metal or
non-stick coatings.
Notes:
· Brush heads and fabric attachments are consumables. Purchase replacements via the official website/online platforms.
· To avoid scratching or damaging the object being cleaned, please choose a suitable brush head. Before use, be sure to conduct a
spot test to ensure safety.
· Attach the scour pad and sponge pad to the Velcro adapter.
· For optimal performance, use the scour and sponge pads when damp. Prolonged dry use may cause irreversible damage to the
product.
Pointed brush
Ideal for removing stubborn stains
from cookware, stovetops, and
other kitchen surfaces.
Scour pad*
For replacing fabric cleaning pads.
Velcro adapter for pads
Suitable for cleaning glass, mirrors
and leather surfaces.
Sponge pad
04
�-� Power On/Off
Long press the Power & Mode button to turn the Scrubber on/off.
�-� Mode Selection
Short press the Power & Mode button during operation to switch modes.
Eco Mode: One LED indicator light is solid white
Max Mode: Two LED indicator lights are solid white
* When battery level drops below ��%, the LED indicator light(s) turn solid red (one light in Eco Mode, two lights in Max Mode),
indicating low battery. Please charge the product promptly.
�-� Using the Extension Pole
Long-handle Mode: The HOTO Swift™ EasyCare Cordless Spin Scrubber can be used with the extension rod connected.
The rod is adjustable in length to suit various cleaning scenarios.
Short-handle Mode: Use the main unit directly without connecting the extension pole.
�-� Waterproof Rating
The main unit of the HOTO Swift™ EasyCare Cordless Spin Scrubber is rated IPX�.
* To ensure the waterproofing of the product, make sure the USB-C rubber seal is fully seated before use.
* The extension pole and brush heads are not waterproof-rated, but since they contain no electronic components, this does not
affect normal use.
�-� Brush Head Assembly and Replacement
The brush heads feature a ball-detent attachment. Simply press gently to install. To remove a head, pull it straight out.
�� How to Use
05
·Assembly
Align the wide arrow alignment icons
on the connecting tube connector
and the connecting tube, so that the
two locating lugs align with and
engage the corresponding guide slots.
Rotate clockwise until fully tightened.
Push the connecting tube slide lock
all the way toward the connecting
tube.
�
�
�
Finish
06
·Connection to Main Unit
1
2
3
Installation: Insert the main unit connector of the extension pole into the rear of the main unit, ensuring the alignment
notches match. Rotate clockwise until fully locked, then push the slide lock toward the main unit until it reaches the end
position.
07
·Storage
After use, the scrubber can be hung on a wall hook
using the lanyard at the end of the non-slip grip for
storage and draining.
�-� Charging
Fully charge the battery before first use.
Open the rubber seal marked with " " on the rear of the main unit to reveal the Type-C charging port. Charge the product
with a USB-C charging cable and a compatible power adapter.
Charging: Two indicator lights flicker in white.
Fully charged: Two indicator lights remain on in white and go off within about three minutes (when the charger is
connected and not working).
* Wipe away water (if any) in the charging port before charging.
* The product will not work while charging.
·Length Adjustment
To adjust the extension pole length for different
scenarios, hold the connecting tube and rotate the
non-slip grip to unlock. Rotate counter-clockwise to
loosen the pole, and clockwise to tighten it.
1
2
3
Removal: First pull back the slide lock. Hold the extension rod and rotate it counterclockwise until unlocked. Pull it
outward to remove the pole.
08
Notes for packaging
The packaging materials are recyclable. Please dispose of packaging in an environmentally friendly manner.
Disposal and recycling information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU)
which should not be mixed with unsorted household waste. Instead, you should protecthuman health and the
environment by handing over your waste equipment to a designated collection point for the recycling of waste
electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will
help prevent potential negative consequences to the environment and human health. Please contact the installer or local
authorities for more information about the location as well as terms and conditions of such collection points.
EC REP
Apex CE Specialists GmbH
Grafenberger Allee 277,
40237 Düsseldorf DE
E-Mail: [email protected]
Fault Cause
Equipment
does not work
Sudden halt during use
Sudden halt during use
Battery cannot be charged
The lithium battery runs low
The lithium battery runs low
Excessive resistance and stalling
Please charge the device in time
Please charge the device in time
Shut it down and restart
Troubleshooting
Faults and troubleshoot
The USB cable is not plugged in
properly, or the charging cable
is not the designated one
Check whether the charging indicator light is on,
plug in the USB cable, and use the charging voltage
specified in the product parameters.
09
Product Accessories:
Extension pole: Approx. ø��.� × ���.� mm (ø�.�� × ��.�� in) (Max. dimension)
Large flat brush: Approx. ø��� × ��.� mm (ø�.�� × �.�� in)
Pointed brush: Approx. ø��.� × ��.� mm (ø�.�� × �.�� in)
Sponge pad: Approx. ø��� × �� mm (ø�.�� × �.�� in)
Scour pad: Approx. ø��� × �� mm (ø�.�� × �.�� in)
Velcro adapter for pads: Approx. ø��� × ��.� mm (ø�.�� × �.�� in)
Brush head storage bag: Approx. ��� × ��� mm (��.�� × ��.�� in)
Charging cable: USB-A to USB-C / ��� mm (��.�� in) / black
Product name: HOTO Swift™ EasyCare Cordless Spin Scrubber
Product model: QWQJA��
Product dimension: Approx. ���.�× �� × ��.� mm (Main Unit) (Approx. �.�� × �.�� × �.�� in)
Net weight: Approx. ��� g (Main Unit)(Approx. �.��lb)
Product color: Grey black
Eco mode typical no-load speed: ��� ±��% r/min
Max mode typical no-load speed: ��� ±��% r/min
Main Unit Waterproof: IPX�
Charging time: Approx. ��� minutes
Battery type: Lithium-ion battery
Rated capacity: ����mAh
Rated input: �V �A
Rated voltage: �.�V
Storage temperature: -��℃‒��℃
Operating temperature: -��℃‒��℃
Charging temperature: �℃‒��℃
04 Technical Specification
10
05 Regulatory Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This supplier’s declaration of conformity is hereby for
We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part 15 Regulation.
Product: HOTO Swift™ EasyCare Cordless Spin Scrubber
Model Number(s): QWQJA20
Brand/Trade: HOTO
Federal Communications Commission Supplier’s Declaration of Conformity
Representative of Responsible Party for SDoC
Company: HOTO (US) TECHNOLOGY CO LTD
Address: 919 North Market Street,Suite 950,Wilmington DE 19801
Country: U.S.A.
Customer Service(US): +1 855-577-2659 [email protected]
Mon-Fri 9: 00am-5: 00pm(CST)
Language spoken: English
FCC Warning:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
Caution: Any changes or modifications to this unit not expressly approved by the party responsible for compliancecould void the user's
authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
11
Europe — EU declaration of conformity
We, Shanghai HOTO Technology Co., Ltd., hereby, declare that this equipment is in compliance with the
applicable Directives and European Norms, and amendments.
DECLARATION OF CONFORMITY
EU Declaration of Conformity
We
Shanghai HOTO Technology Co., Ltd.
Declare that the product:
HOTO Swift™ EasyCare Cordless Spin Scrubber/QWQJA20
Complies with the essential health and safety requirements of the following directives:
2014/30/EU Electromagnetic Compatibility directive References to the following
harmonized standard were made:
Shanghai HOTO Technology Co., Ltd.
Building 45, No.50 Moganshan Road,Shanghai, China.
2011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Authorised signatory and technical file holder:
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021+A2:2024
EN 61000-3-3:2013+A2:2021+AC:2022-01
Designed by HOTO
