56791
Visit our website at: https://www.harborfreight.com
For product assistance, visit harborfreight.com/customer-support/contact-us
1925C-B
CORDLESS
HEAT GUN
20v LITHIUM-ION
tM
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s date code in the back of
the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in
a safe and dry place for future reference.
26c
When unpacking, make sure that the product is intact and
undamaged. If any parts are missing or broken, please
visit harborfreight.com/customer‑support/contact‑us
as soon as possible.
Copyright
©
2026 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
Page 2
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFety OperatiOn MaintenanceSetup
table of contents
Safety ......................................................... 2
Specifications ............................................. 7
Setup .......................................................... 7
Operation .................................................... 8
Maintenance ............................................... 9
Component List and Diagram .................... 11
Warranty .................................................... 12
tM
WarninG SyMBOLS anD DeFinitiOnS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
iMpOrtant SaFety inFOrMatiOn
General tool Safety Warnings
read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term ″ tool″ in the warnings refers to your battery-operated (cordless) tool.
Work area Safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate tools in explosive atmospheres,
such as in the presence of flammable
liquids, gases or dust. Tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders
away while operating a tool.
Distractions can cause you to lose control.
electrical Safety
Do not expose tools to rain or wet conditions. Water entering a tool will increase the risk of electric shock.
Page 3
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFetyOperatiOnMaintenance Setup
personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a tool. Do not
use a tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while operating tools
may result in serious personal injury.
2. use personal protective equipment.
always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
3. prevent unintentional starting.
ensure the trigger is in the off-position
before connecting to power source, picking
up or carrying the tool. Carrying tools with
your finger on the Trigger or energizing tools
that have the Trigger on invites accidents.
4. Do not overreach. Keep proper footing
and balance at all times. This enables better
control of the tool in unexpected situations.
5. Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from tube. Loose clothes,
jewelry or long hair can be burned.
6. Only use safety equipment that has been
approved by an appropriate standards agency.
Unapproved safety equipment may not provide
adequate protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the
specific hazards in the work area.
7. Do not leave the tool unattended when the
Battery Pack is connected. Turn off the tool,
and remove the Battery Pack before leaving.
8. This product is not a toy.
Keep it out of reach of children.
9. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
10. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
tool use and care
1. Do not use the tool if the trigger does not turn
it on and off. Any tool that cannot be controlled
with the Trigger is dangerous and must be repaired.
2. Disconnect the battery pack from the
tool before making any adjustments,
changing accessories, or storing tools.
Such preventive safety measures reduce
the risk of starting the tool accidentally.
3. Store idle tools out of the reach of children and
do not allow persons unfamiliar with the tool
or these instructions to operate the tool. Tools
are dangerous in the hands of untrained users.
4. Maintain tools. check for misalignment or
binding of moving parts, breakage of parts
and any other condition that may affect
the tool’s operation. if damaged, have the
tool repaired before use. Many accidents
are caused by poorly maintained tools.
5. use the tool and accessories in accordance
with these instructions, taking into
account the working conditions and the
work to be performed. Use of the tool for
operations different from those intended
could result in a hazardous situation.
Service
1. Have your tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the tool is maintained.
2. never service damaged Battery packs.
Service of BATTERY packs should
only be performed by the manufacturer
or authorized service providers.
3. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Page 4
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFety OperatiOn MaintenanceSetup
Battery tool use and care
1. prevent unintentional starting. Ensure the switch
is in the off-position before connecting to battery
pack, picking up or carrying the tool. Carrying the
tool with your finger on the switch or energizing
tool that have the switch on invites accidents.
2. Disconnect the battery pack from the
tool before making any adjustments,
changing accessories, or storing tool.
Such preventive safety measures reduce
the risk of starting the tool accidentally.
3. recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
4. use tools only with specifically designated
battery packs. Use of any other battery
packs may create a risk of injury and fire.
5. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
6. under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
7. Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
8. Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 140°F may cause explosion.
9. Follow all charging instructions and do
not charge the battery pack or tool outside
of the temperature range specified in the
instructions. Charging improperly or at
temperatures outside of the specified range may
damage the battery and increase the risk of fire.
10. Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the product is maintained.
11. Do not modify or attempt to repair the tool
or the battery pack except as indicated
in the instructions for use and care.
12. the battery charger gets hot during
use. The Charger’s heat can build up to
unsafe levels and create a fire hazard if
it does not receive adequate ventilation,
due to an electrical fault, or if it is used in a
hot environment. Do not place the Charger on a
flammable surface. Do not obstruct any vents on
the Charger. especially avoid placing the
charger on carpets and rugs; they are not only
flammable, but they also obstruct vents under
the charger. Place the Charger on a stable, solid,
nonflammable surface (such as a stable metal
workbench or concrete floor) at least 1 foot away
from all flammable objects, such as drapes or walls.
Keep a fire extinguisher and a smoke detector in
the area. Frequently monitor the Charger and
Battery Pack while charging.
Heat Gun Safety Warnings
1. Hidden areas behind walls, ceilings, floors,
soffit boards, and other panels may contain
flammable materials that could be ignited by
the heat gun when working in these locations.
The ignition of these materials may not be
readily apparent and could result in property
damage and injury to persons. When working in
these locations, keep the heat gun moving in a
back‑and‑forth motion.
Lingering or pausing in one spot could ignite
the panel or the material behind it.
2. Extreme care should be taken when stripping
paint. The peelings, residue and vapors of
paint may contain lead, which is poisonous.
Any pre‑1977 paint may contain lead and paint
applied to homes prior to 1950 is likely to contain
lead. Once deposited on surfaces, hand‑to‑
mouth contact can result in the ingestion of lead.
Exposure to even low levels of lead can cause
irreversible brain and nervous system damage;
young and unborn children are particularly
vulnerable. Before beginning any paint removal
process you should determine whether the paint
you are removing contains lead. This can be
done by your local health department or by a
professional who uses a paint analyzer to check
the lead content of the paint to be removed.
LEAD BASED PAINT SHOULD ONLY BE
REMOVED BY A PROFESSIONAL AND SHOULD
NOT BE REMOVED USING A HEAT GUN.
3. Exercise CAUTION when using this
product outdoors. To reduce the risk
of electric shock, keep extension cord
connection dry and off the ground.
Page 5
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFetyOperatiOnMaintenance Setup
4. Persons removing paint should
follow these guidelines:
a. Move the work piece outdoors.
If this is not possible, keep the work area
well ventilated. Open the windows and put
an exhaust fan in one of them. Be sure the
fan is moving the air from inside to outside.
b. Remove or cover any carpets, rugs, furniture,
clothing, cooking utensils and air ducts.
c. Place drop cloths in the work area to catch any
paint chips or peelings. Wear protective clothing
such as extra work shirts, overalls and hats.
d. Work in one room at a time.
Furnishings should be removed or
placed in the center of the room and
covered. Work areas should be sealed
off from the rest of the dwelling by
sealed doorways with drop cloths.
e. Children, pregnant or potentially pregnant
women, and nursing mothers should not
be present in the work area until the work
is done and all clean up is complete.
f. Wear a dust respirator mask or a dual filter
(dust and fume) respirator mask which has been
approved by the Occupational Safety and Health
Administration (OSHA), the National Institute of
Safety and Health (NIOSH), or the United States
Bureau of Mines. These masks and replaceable
filters are readily available at major hardware
stores. Make sure the mask fits. Beards
and facial hair may keep masks from sealing
properly. Change filters often. DiSpOSaBLe
paper MaSKS are nOt aDeQuate.
g. Use caution when operating the Heat Gun.
Keep the Heat Gun moving, as excessive
heat will generate fumes which can
be inhaled by the operator.
h. Keep food and drink out of the work area.
Wash hands, arms and face and
rinse mouth before eating or drinking.
Do not smoke or chew tobacco in the work area.
i. Clean up all removed paint and
dust by wet mopping the floors.
Use a wet cloth to clean all walls, sills and any
other surface where paint or dust is clinging.
DO nOt SWeep, Dry DuSt Or VacuuM.
Use a high phosphate detergent or trisodium
phosphate (TSP) to wash and mop areas.
j. At the end of each work session put the paint
chips and debris in a double plastic bag, close it
with tape or twist ties and dispose of properly.
k. Remove protective clothing and work shoes in
the work area to avoid carrying dust into the rest
of the dwelling. Wash work clothes separately.
Wipe shoes off with a wet rag that is then
washed with the work clothes. Wash hair
and body thoroughly with soap and water.
5. When working with plastics, varnish, or
similar materials, gases develop that are
easily flammable and can lead to explosions.
Be prepared for flames to develop and keep
suitable fire extinguishing means at hand.
6. The Nozzle becomes very hot. Do not lay the
Heat Gun on flammable surfaces when operating
the Gun or immediately after turning the Gun off.
Always set the Heat Gun on a flat, level surface
so that the Nozzle tip is directed upwards
and away from the supporting surface.
7. Do not use the Heat Gun near flammable materials.
8. Do not point the Heat Gun at people or animals.
The intense heat can injure them.
9. Do not touch the tube of the heating
element or the Nozzle when they are hot.
They will be hot enough to cause burns
during use and for some time afterwards.
10. Do not use the Heat Gun on glass.
11. Do not use the Heat Gun as a hair dryer.
12. Do not heat up materials that can be
damaged by high temperatures.
Page 6
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFety OperatiOn MaintenanceSetup
Lithium Battery Safety Warnings
LitHiuM BatterieS StOre
a LarGe aMOunt OF enerGy anD
WiLL Vent Fire Or eXpLODe iF MiStreateD:
1. Keep Battery pack dry.
2. DO nOt DO any OF tHe FOLLOWinG
tO tHe Battery pacK:
a. Open,
b. Drop,
c. Short-circuit,
d. puncture,
e. incinerate, or
f. expose to temperatures greater than 140°F.
3. Charge Battery Pack only according
to its Charger’s instructions.
4. Inspect Battery Pack before every use;
do not use or charge if damaged.
SaVe tHeSe inStructiOnS.
Grounding
tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG:
check with a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. Do not modify the power cord plug provided with the charger. Do not use the
charger if the power cord or plug is damaged. if damaged, have it repaired by a service facility
before use. if the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
extension cords
note: Extension cords must not be used with this item’s Charger.
Symbology
V
Volts
Direct Current
a
Amperes
WARNING marking concerning Risk
of Eye Injury. Wear ANSI‑approved
safety goggles with side shields.
Read the manual before
set‑up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover Charger
ventilation ducts.
Charge on fireproof surface only.
WARNING marking concerning
Risk of Electric Shock.
Properly connect Charger’s power
cord to appropriate outlet.
WARNING marking concerning
Risk of Explosion.
Do not puncture, short, or open
battery packs and do not charge
damaged battery packs.
Page 7
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFetyOperatiOnMaintenance Setup
Specifications
Battery Type Bauer 20V Li‑Ion
Charger Type Bauer 20V Li‑Ion
Maximum Temperature 895º F
Setup - Before use:
read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
note: For additional information regarding the parts listed in the following pages,
refer to Component List and Diagram on page 11.
Functions
nozzle
trigger
trigger
Lock Off
Work Light
Hook
Handle
Page 8
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFety OperatiOn MaintenanceSetup
Operating instructions
read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tool Set up
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the trigger is in the off-position and remove its Battery
pack before performing any procedure in this section.
charging
Charge battery before using this tool. Follow instructions included with battery charger.
uses
The Heat Gun can be used for:
• Shrinking of shrink tubing, packaging
and electrical components.
• Deforming of articles made from acrylic, PVC,
and polystyrene tubing, plates, and profiles.
• Welding of thermoplastic polymer, flooring
materials of PVC and linoleum, PVC‑coated
fabric, wallpapers, tarpaulins and foils.
• Soldering of tin, special silver solder,
SMD elements, cable lugs, and for
loosening soldered connections.
• Paint removal. Removal of old coatings of
oil paint, varnish, and synthetic plaster.
• Drying of color shade samples, filter, adhesives,
construction joints and stucco forms.
• Joining adhesives. Large surface gluing
with contact adhesives, activation of
pressure, or heat sensitive adhesives,
acceleration of bonding processes, releasing
of bonding points as well as releasing
of bonding of edge bond or veneer.
• Defrosting of icy stairs and steps, door locks,
trunk lids, car doors or metal water pipes.
• Disinfection. With the tool set at the
highest setting, animal sites/stables may
be disinfected. Wood worm infestation
may be controlled. Do not heat up the
wood surface too much or it can burn.
Workpiece and Work area Set up
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
3. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
4. Remove all flammable and heat sensitive
materials from the work area.
5. Plan an insulated, non‑flammable surface
for the gun to cool down on after use.
6. Keep multiple class ABC fire extinguishers
readily accessible while working
and while workpiece cools.
Page 9
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFetyOperatiOnMaintenance Setup
General Operating instructions
1. Make sure that the Trigger is in the
off‑position, then attach the Battery Pack.
2. Attach Deflector or Concentrator Nozzle if desired.
3. To start Heat Gun, press Trigger Lock Off
button either left or right and then squeeze
Trigger to operate Heat Gun. Work Light
will turn on when Trigger is activated.
4. Wait one minute to allow Heat Gun output to
reach desired level before beginning job.
WarninG! tO preVent SeriOuS inJury:
Do not leave the Heat Gun unattended
while pointed at surfaces or objects.
WarninG! tO preVent SeriOuS inJury:
Do not touch work area with the Heat
Gun; it could scorch or ignite.
cautiOn! tO preVent inJury:
Do not block air vents when Heat Gun is
in use; it could cause tool to overheat.
5. When finished or changing accessory
Nozzles, release Trigger and allow time
for the tool to cool down on an insulated,
non‑flammable surface. Work Light and
Motor Fan will turn off after 6 seconds.
cautiOn! tO preVent inJury:
after use, do not touch nozzle
until it has had time to cool.
6. To prevent accidents, turn off the tool and remove
its Battery Pack after use. Allow the Heat Gun to
cool down on an insulated, non‑flammable surface.
WarninG! tO preVent SeriOuS inJury:
Do not leave work area until workpiece has
cooled. Be alert for indications of concealed fire.
7. Clean, then store the tool indoors out of
children’s reach. If desired, use Hook to
hang Heat Gun after use. Lift Hook from slot
and hang carefully in selected location.
Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the trigger is in the off-position and remove its Battery
pack before performing any procedure in this section.
tO preVent SeriOuS inJury FrOM tOOL FaiLure:
Do not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BeFOre eacH uSe, inspect the general
condition of the tool. Check for:
• leaking, swollen, or cracked battery pack,
• loose hardware,
• misalignment or binding of moving parts,
• blocked air vents,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2. aFter uSe, wipe external surfaces
of the tool with clean cloth.
3. Li‑Ion BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
Do not short, incinerate or open battery.
4. Disconnect battery pack and store battery pack,
charger, and tool in dry, indoor area out of
reach of children and away from metal objects
(i.e., paperclips, coins) to prevent shorting.
Page 10
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFety OperatiOn MaintenanceSetup
troubleshooting
problem possible causes Likely Solutions
Tool will not start. 1. Battery Pack not properly
connected.
2. Battery Pack not properly
charged.
3. Battery Pack wearing out.
4. Internal damage or wear.
(Trigger, for example.)
1. Remove Battery Pack, make sure there are no
obstructions, reinsert the Battery Pack according
to its shape (it should only fit one way), and press
firmly until the Battery Pack locks in place.
2. Make sure Charger is connected and
operating properly. Give enough time for
Battery Pack to recharge properly.
3. Dispose of old Battery Pack
properly or recycle. Replace Battery Pack.
4. Have technician service tool.
Tool operates slowly. Battery Pack wearing out. Dispose of old Battery Pack properly or recycle.
Replace Battery Pack.
Excessive noise
or rattling.
Internal damage or wear. (Carbon
brushes or bearings, for example.)
Have technician service tool.
Overheating. Blocked motor housing vents. Wear ANSI‑approved safety goggles and
NIOSH‑approved dust mask/respirator while
blowing dust out of motor using compressed air.
Temperature
insufficient.
1. Tool not allowed enough
time to reach heat level.
2. Blocked air vents.
1. After increasing heat setting, wait one minute
minimum for tool to reach desired heat level.
2. Check air vents are clear.
Unsatisfactory
results.
Inappropriate heat for task. Adjust heat setting or distance to
workpiece to compensate.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect Battery pack and charger power supply before service.
record product’s Date code Here:
note: if product has no date code, record month and year of purchase instead.
note: The component list and assembly diagram are shown for reference only.
To view all currently available replacement parts, please visit harborfreight.com/parts
Specify UPC 193175601094 when ordering parts.
Page 11
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 56791
SaFetyOperatiOnMaintenance Setup
component List and Diagram
pLeaSe reaD tHe FOLLOWinG careFuLLy
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE COMPONENT LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
component List
part Description Qty
1 Right Housing 1
2 Right Battery Foot 1
3 Back Cover 1
4 Motor Fan 1
5 Heating Element 1
6 Metal Cover 1
7 Front Cover 1
8 Trigger 1
9 Trigger Spring 1
10 Switch Cover 1
part Description Qty
11 Switch 1
12 LED Light Cover 1
13 Safety Push Rod 1
14 Left Housing 1
15 Screw 8
16 Left Battery Foot 1
17 PCBA 1
18 Concentrator Nozzle 1
19 Deflector Nozzle 1
assembly Diagram
1 3
1 6
1 7
1 8
1 9
1 2
1 1
1 0
9
8
4
5
6
1
2
1 4
1 5
7
3
tM
For product assistance, visit harborfreight.com/customer-support/contact-us
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
