
BLACKSTONEPRODUCTS.COM
ENGLISH
SAFETY ALERT KEY
dANGeR
Indicates a hazardous situation
that, if not avoided, will result in
death or serious injury�
CAUTIoN
Indicates a hazardous situation
that, if not avoided, could result
in minor or moderate injury�
WARNING
Indicates a hazardous situation
that, if not avoided, could result
in death or serious injury�
NOTICE
Indicates information considered
important, but not hazard-
related (e�g� messages related to
property damage)�
oWNeR’s MANUAl
IMPORTANT:
This instruction manual contains important
information necessary for the proper assembly and safe
use of the appliance.
Read and follow all warnings and instructions before
assembling and using the appliance.
Follow all warnings and instructions when using
the appliance.
Keep this manual for future reference.
Installer/Assembler: leave these instructions with the consumer�
latest version of the manual:
BlackstoneProducts.com/supportBlackstoneProducts.com/support
Model(s): 2400 • 2404
v09
LEGGERO PRO PIZZA OVEN
13" ROTATING STONE
TABLE OF CONTENTS
IMPoRTANT sAFeTY INFoRMATIoN � � � � � � � � � � � � � � � � � � � � � � �02
AsseMBlY GUIde � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 04
oPeRATIoN INsTRUCTIoNs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 08
TRoUBlesHooTING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
CUsToMeR seRVICe � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
01

ENGLISH
BLACKSTONEPRODUCTS.COM
OWNER’S MANUAL | IMPORTANT SAFETY INFORMATION
GAS APPLIANCE SAFETY
dANGeR
If you smell gas:
• shut o gas to the appliance.
• extinguish any open flame.
• open hood (if applicable).
• If odor continues, keep away from the appliance
and immediately call your gas supplier or your fire
department.
Failure to follow these instructions could result in fire or
property damage, personal injury or death.
WARNING
• do NoT store or use gasoline or other flammable liquids
or vapors in the vicinity of this or any other appliance.
• An lPG cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance.
INSTALLATION MUST CONFORM wITH LOCAL CODES.
In the absence of local codes, installation must conform with
either
ANsI Z223�1/NFPA 54, CsA B149�1, or CsA B149�2�
dANGeR
CARBON MONOxIDE HAZARD
This appliance can produce
carbon monoxide which is
poisonous and has no odor.
Using it in an enclosed space
can kill you.
NeVeR use this appliance in
an enclosed space such as a
camper, tent, car or home.
dANGeR
Flammable items can combust if placed near the appliance.
Keep the appliance area clear and free from combustible
materials, aerosol containers, gasoline and other flammable
vapors and liquids.
WARNING
Improper installation, use, adjustment, alteration, service,
modification, or maintenance can cause property damage,
serious injury, or death. Refer to this manual.
• The use of alcohol, prescription, or non-prescription drugs may
impair the consumer’s ability to properly assemble or safely
operate the appliance�
• Keep children and pets away from the appliance at all times�
• Have a type BC or ABC fire extinguisher readily available�
• do NoT use for purposes other than intended�
• For outdoor domestic use only, not for commercial use�
• do NoT use this appliance as a heater�
dANGeR
• NeVeR operate this appliance unattended.
• If a fire should occur, keep away from the appliance and
immediately call your fire department. do NoT attempt
to extinguish an oil or a grease fire with water.
Failure to follow these instructions could result in fire or
property damage, personal injury or death.
Model(s): 2400 • 2404
IMPORTANT SAFETY INFORMATION
NoTe: This equipment has been tested and found to comply with the limits NoTe: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more and on, the user is encouraged to try to correct the interference by one or more
of the following measures:of the following measures:
• • Reorient or relocate the receiving antenna.Reorient or relocate the receiving antenna.
• • Reorient or relocate the receiving antenna.Reorient or relocate the receiving antenna.
• • Increase the separation between the equipment and receiver.Increase the separation between the equipment and receiver.
• • Connect the equipment into an outlet on a circuit dierent from that to Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.which the receiver is connected.
• • Consult the dealer or an experienced radio/TV technician for help Consult the dealer or an experienced radio/TV technician for help
Unintentional Radiators/Radio.Unintentional Radiators/Radio.
Receivers - FCC Verification Markings : 47 CFR 15.19 (a)Receivers - FCC Verification Markings : 47 CFR 15.19 (a)
Changes or modifications not expressly approved by the party responsible for Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.compliance could void the user’s authority to operate this device.
This device complies with Part 15 of FCC Rules. operation is subject to the This device complies with Part 15 of FCC Rules. operation is subject to the
following two conditions: (1) This device may not cause harmful interference, following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interfer-and (2) This device must accept any interference received, including interfer-
ence that may cause undesired operation.ence that may cause undesired operation.
North Atlantic Imports, llC 1073 W 1700 N logan, UT 84321 UsANorth Atlantic Imports, llC 1073 W 1700 N logan, UT 84321 UsA
BlackstoneProducts.comBlackstoneProducts.com
02

BLACKSTONEPRODUCTS.COM
ENGLISH
| OWNER’S MANUALIMPORTANT SAFETY INFORMATION
SETTING UP YOUR OUTDOOR SPACE
THIS APPLIANCE MUST ONLY BE USED OUTDOORS ON A LEVEL
SURFACE.
• do NoT use this appliance inside buildings, garages, or any other
enclosed area�
• do NoT install this appliance in or on a boat�
• do NoT install this appliance in or on a recreational vehicle�
c. Within a partial enclosure that
includes an overhead cover
and three sidewalls, as long as
30% or more of the horizontal
periphery of the enclosure is
permanently open�
b. Within a partial enclosure that
includes an overhead cover
and no more than two side-
walls� The sidewalls may be
parallel, as in a breezeway, or
at right angles to each other�
a. With walls on three sides, but
with no overhead cover�
SHELTERED OUTDOOR AREAS:
All openings must be permanently open; sliding doors, garage doors,
windows or screened openings are not considered as permanent
openings�
An appliance is considered to be outdoors if installed with shelter no
more inclusive than:
The minimum ambient operating temperature is 0°F (-18°C)�
MAINTAIN PROPER CLEARANCES FROM COMBUSTIBLE MATERIAL.
• do NoT use this appliance on or under any apartment or condo-
minium balcony or deck�
• do NoT obstruct the flow of combustion and ventilation air�
A
A
A
A
A
A
A
A
A
A
• do NoT use this appliance under overhead combustible
construction�
do NoT operate this appliance any
closer than 36 in (1 m) from the
sides and back of the appliance to
combustible construction�
A = 36 in (1 m)
A = 36 in (1 m)
Both ends open
Both ends open
30%
30%
30%
30%
ELECTRIC APPLIANCE SAFETY
This appliance is suitable for outdoor use�
TO PROTECT AGAINST ELECTRIC SHOCK:
• do NoT immerse cord or plugs in water or other liquid�
• Unplug from the outlet when not in use and before cleaning� Allow
to cool before putting on or taking o parts�
• The supply cord should be regularly examined for signs of damage,
and if the cord is damaged, the appliance must not be used�
• do NoT operate this appliance with a damaged cord, plug, or after
the appliance malfunctions or has been damaged in any manner�
Contact the manufacturer for repair�
• do NoT let the cord hang over the edge of a table or touch
hot surfaces�
• Keep any electrical supply cord and the fuel supply hose away from
heated surfaces�
• When connecting, first connect plug to the appliance then into
the outlet�
THE APPLIANCE MUST BE CONNECTED ONLY TO AN OUTLET THAT IS
PROTECTED BY A GROUND-FAULT CIRCUIT-INTERRUPTER (GFCI).
• Press the TesT button (then ReseT button) every month to assure
proper operation�
• The appliance is to be connected to a socket-outlet having an
earthing contact�
• This appliance, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local codes, with
the National electric Code, ANsI/ NFPA 70, or the Canadian electrical
Code, CsA C22�1�
• do NoT remove the grounding plug or use with an adapter
of 2 prongs�
• Use only extension cords with a 3 prong grounding plug, rated for
the power of the equipment, and approved for outdoor use with a
W-A marking�
Model(s): 2400 • 2404
03

ENGLISH
BLACKSTONEPRODUCTS.COM
OWNER’S MANUAL | ASSEMBLY GUIDE Model(s): 2400 • 2404
ASSEMBLY GUIDE
PARTS
QTY
1.1a
Upper front panel 1
1.1b
Upper rear panel 1
1.2a
Base panel cover 1
1.2b
Control knob bezel 1
1.3a
oven lid 1
1.3b
Thermometer 1
1.3c
Mica sheet 1
1.4a
Bottom plate 1
1.4b
sealing plate 1
1.4c
Inner cap 1
PARTS
QTY
1.4d
Inner cover rear plate
1
1.4e
Fire blocking plate 1
1.5a
Gas line 1
1.5b
Burner 1
1.5c
Boost burner ignition
needle
1
1.5d
Boost burner heat
shield
1
1.5e
Boost burner bale
panel
1
1.6a
Ignitor 1
PARTS
QTY
1.6b
Ignition needle 1
1.6c
Thermoelectric
couple
1
1.7a
Battery box 1
1.7b
Battery box cover 1
1.7c
Motor button 1
1.7d
Motor 1
1.8a
Motor heat shield 1
1.8b
Motor support 1
PARTS
QTY
1.8c
shaft connecting
block
1
1.8d
Coupling 1
1.8e
stop plate 1
1.8f
shaft bearing sleeve 1
1.9a
Turntable support 1
1.9b
Turntable 1
2.1
Nameplate 1
4.1
Foot base 4
ExPLODED VIEw
PARTS LIST
8
1.1a
1.8d
1.5a
1.3a
4.1
1.7b
1.9a
1.6b
1.4b
1.8a
1.2a
1.8e
1.5b
1.3b
1.7c
1.9b
1.6c
1.4c
1.8b
1.2b
1.8f
1.6a
1.4a
1.7d
1.1b
2.1
1.7a
1.4d
1.8c
4
9
2
7
5
3
6
12
1.3c
1.5d
1.5c
1.4e
1.5e
11
04

BLACKSTONEPRODUCTS.COM
ENGLISH
| OWNER’S MANUALASSEMBLY GUIDE
AA BATTERY INCLUDED
AsseMBlY INsTRUCTIoNs
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
CAUTIoN
Sharp edges. Wear gloves while assembling.
ELECTRIC REQUIREMENTS:
120V 60Hz
TOOLS NEEDED:
#3 Phillips head screwdriver &
Adjustable wrench
TOOL NEEDED:
#3 Phillips head screwdriver
TOOL NEEDED:
Adjustable wrench
TOOL NEEDED:
5mm Allen wrench
NOT INCLUDED:
lPG cylinder
size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to lPG cylinder must include collar to
protect lPG cylinder valve. protect lPG cylinder valve.
NOT INCLUDED:
17" griddle base
NOT INCLUDED:
22" griddle base
NOT INCLUDED:
AA battery
NOT INCLUDED:
lPG cylinder
size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
NOT INCLUDED:
one (1) AA battery (for ignition)
optional four (4) AA batteries
(for the motor)
TOOLS NEEDED:
#3 Phillips head screwdriver &
Adjustable wrench
TOOL NEEDED:
#3 Phillips head screwdriver
TOOL NEEDED:
Adjustable wrench
TOOL NEEDED:
5mm Allen wrench
NOT INCLUDED:
lPG cylinder
size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to lPG cylinder must include collar to
protect lPG cylinder valve. protect lPG cylinder valve.
NOT INCLUDED:
17" griddle base
NOT INCLUDED:
22" griddle base
NOT INCLUDED:
AA battery
NOT INCLUDED:
lPG cylinder
size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
NOT INCLUDED:
one (1) AA battery (for ignition)
optional four (4) AA batteries
(for the motor)
Model(s): 2400 • 2404
1
oven body
(1 piece)
2
oven door
(1 piece)
3
Pizza stone
(1 piece)
4
legs (4 pieces)
5
Bale panel
(1 piece)
6
Control knob
(1 piece)
7
door shaft seat
(l) (1 piece)
8
door shaft seat
(R) (1 piece)
9
door handles
(2 pieces)
10
Power cord
(1 piece)
11
Regulator
(1 piece)
12
Matchstick
holder (1 piece)
[a.] M4x10 screws
(18 pieces)
[b.] M4x12 screws
(2 pieces)
[c.] Phillips head
screwdriver (1 piece)
[d.] Hexagonal
wrench (1 piece)
[e.] M6x24
screw (1 piece)
spares:
[a.] x 2
[b.] x 1
STEP 01
set the pizza oven on its back�
Use sixteen (16) M4x10 screws [a.] to attach the four (4) legs to the
bottom of the pizza oven�
For best results, use a pizza peel
to launch your pizzas�*
*Included with the 2400.*Included with the 2400.
05

ENGLISH
BLACKSTONEPRODUCTS.COM
OWNER’S MANUAL | ASSEMBLY GUIDE Model(s): 2400 • 2404
STEP 02
Insert one (1) AA battery (not included) under the
battery cap�
screw the cap into place over the positive terminal�
STEP 03
Use two (2) M4x10 screws [a.] to attach the bale panel to
the front panel�
Install the control knob by pushing it into place in the oFF position�
STEP 05
screw the two (2) door handles onto the door shafts�
STEP 04
set the pizza oven on its feet�
Align the pizza oven stone with the turntable notches and use the
hexagonal wrench [d.] and one (1) M6x24 screw [e.] to secure�
06

BLACKSTONEPRODUCTS.COM
ENGLISH
| OWNER’S MANUALASSEMBLY GUIDE
CAUTIoN
Heavy pieces. Two people should assemble this appliance.
Assembly time: ~30 minAssembly time: ~30 min
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
CAUTIoN
Hot appliance. The cover/lid/hood MUST be open when the
appliance is in use.
NOTICE
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
NOTICE
DO NOT place items on stabilizing shelf during use.
NOTICE
The paper towel holder arm must be in the open position
while the appliance is in use.
CAUTIoN
Heavy pieces. Two people should assemble this appliance.
Assembly time: ~30 minAssembly time: ~30 min
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
CAUTIoN
Hot appliance. The cover/lid/hood MUST be open when the
appliance is in use.
NOTICE
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
NOTICE
DO NOT place items on stabilizing shelf during use.
NOTICE
The paper towel holder arm must be in the open position
while the appliance is in use.
Model(s): 2400 • 2404
STEP 06
slide the door shaft seat (l) into the upper square hole�
Use one (1) M4x12 screw [b.] to attach the door shaft seat to the front
of the oven�
STEP 09
Proceed to the OPERATION INSTRUCTIONS�
STEP 07
slide the door shaft into the (l) seat� slide the door shaft seat
(R) onto the door shaft�
slide the door shaft seat (R) into the upper square hole� Use one (1)
M4x12 screw [b.] to secure to the front of the oven�
OPTION A: Plug the power cord
into the motor�
OPTION B: Insert four (4) AA
batteries into the motor�
(do NoT use the batteries and
the AC power supply at the
same time�)
STEP 08
To power the motor:
07

ENGLISH
BLACKSTONEPRODUCTS.COM
OWNER’S MANUAL | OPERATION INSTRUCTIONS
CoNNeCT THe lPG CYlINdeR
ONLY USE A 1 LB (453 G) CYLINDER
LPG CYLINDER SAFETY
• The lPG supply cylinder to be used must be constructed and
marked in accordance with the specifications for lP gas cylin-
ders, U�s� department of Transportation (doT) or the standard for
Cylinders, spheres and Tubes for the Transportation of dangerous
Goods, CAN/CsA-B339�
• only lPG cylinders marked “propane” shall be used�
• The cylinder used, if in excess of 2�2 Ib (1�00 kg) propane capacity,
must include a collar to protect the cylinder valve�
• The lPG cylinder supply system must be arranged for vapor
withdrawal�
Always keep new lPG cylinders in upright position during use, transit or
Always keep new lPG cylinders in upright position during use, transit or
storage.
storage.
LEAK TEST INSTRUCTIONS
STEP 01
Turn the control knobs to oFF�
STEP 02
Connect the lPG cylinder to the regulator� Connect the
regulator to the appliance�
STEP 03
Use a clean paintbrush
to brush a 10/90 mild soap and
water solution onto joint areas of
valves and regulator�
leaks are indicated by growing
leaks are indicated by growing
bubbles.
bubbles.
DISCONNECTING THE LPG CYLINDER
storage of the appliance indoors is only permissible if the lPG cylinder is
storage of the appliance indoors is only permissible if the lPG cylinder is
disconnected and removed from the appliance.
disconnected and removed from the appliance.
STEP 01
ensure that the control knob(s) are turned to oFF�
STEP 02
once the appliance has cooled, disconnect the regulator
from the gas line by unscrewing the collar�
STEP 03
Unscrew the lPG cylinder from the regulator�
STEP 04
Place dust cap on lPG cylinder valve outlet whenever
cylinder is not in use�
only install the type of dust cap on cylinder valve outlet that is provided
only install the type of dust cap on cylinder valve outlet that is provided
with the cylinder valve. other types of caps or plugs may result in leakage of
with the cylinder valve. other types of caps or plugs may result in leakage of
propane.
propane.
STORING LPG CYLINDERS
WARNING
• DO NOT store a spare LPG cylinder under, near, or in this
appliance.
• DO NOT fill an LPG cylinder beyond 80% full.
If the information above is not followed exactly, a fire causing
death or serious injury may occur.
The lPG cylinder must be disconnected when the appliance is
not in use�
STEP 01
screw in the lPG
cylinder into the gas regulator,
turning the cylinder clockwise�
The regulator may make a humming
The regulator may make a humming
or whistling noise during operation.
or whistling noise during operation.
This will not aect safety or use of the
This will not aect safety or use of the
appliance.
appliance.
STEP 02
Insert the regulator and lPG cylinder into the gas line of the
appliance� Turn the collar of the regulator clockwise to secure it to
the gas line�
STEP 04
If growing bubbles appear, re-tighten connections�
WARNING
If leaks cannot be stopped, DO NOT try to repair.
Regulator must be replaced with a Blackstone approved
model by a professionally licensed, authorized dealer.
REGULATOR SAFETY
• Use this appliance, as purchased, only with gas and regulator/
valve assembly supplied� do NoT use quick connect fittings or
other add-ons�
• do NoT cross thread (force at an improper angle) the connection
between your lPG cylinder and regulator�
• If you can not connect the regulator, do NoT use the regulator�
Regulator must be replaced with a Blackstone approved model by a profession-
Regulator must be replaced with a Blackstone approved model by a profession-
ally licensed, authorized dealer.
ally licensed, authorized dealer.
ensure that the lPG cylinder is
positioned below the regulator�
(If the liquid level of the propane is
(If the liquid level of the propane is
above the regulator, the regulator will
above the regulator, the regulator will
frost.)
frost.)
IF FROSTING PERSISTS
AFTER CYLINDER IS ANGLED
CORRECTLY:
STEP 01
Turn o the appliance
and disconnect lPG cylinder
immediately� This indicates a
problem with the lPG cylinder
and it should not be used on
any product�
STEP 02
Return lPG cylinder to
supplier�
Model(s): 2400 • 2404
OPERATION INSTRUCTIONS
08

BLACKSTONEPRODUCTS.COM
ENGLISH
| OWNER’S MANUALOPERATION INSTRUCTIONS
❸❸
❸
❸
❷❷
❷
❷
❶❶
❶
❶
❹❹
❹
❹
2. THERMOCOUPLE SURE-START IGNITION
Remove the oven door� do NoT use the oven door at any time
while the oven is in use�
2. THERMOCOUPLE SURE-START IGNITION
Note: Keep the oven door closed as much as possible to reach and
maintain temperature�
STEP 01
Insert one (1) AA battery
under the battery cap�
screw the cap into place over the
positive terminal�
STEP 02
❶
❶
Turn the Pizza oven control knob to oFF�
❷
❷
Turn on the motor�
❸
❸
Push in the control knob and turn counterclockwise a quarter
turn to loW� Hold in for 10~20 seconds until thermocouple heats
up� You should hear the igniter clicking the entire time� (When you
release the knob, the oven should remain lit�)
STEP 03
once the flame is consistent, adjust to desired
temperature
❹.
❹.
STEP 02
❶❶
Turn the Pizza oven control knob to oFF�
❷❷
Turn on the
motor�
❸❸
Push in the control knob and turn counterclockwise a
quarter turn to loW� Hold in for 10~20 seconds until thermocouple
heats up� You should hear the igniter clicking the entire time� (When
you release the knob, the oven should remain lit�) once the flame is
consistent, adjust to desired temperature
❹.❹.
Before first use, run the oven for 15-20 minutes on HIGH to burn o manufac-Before first use, run the oven for 15-20 minutes on HIGH to burn o manufac-
turing remnants.turing remnants.
Before first use, run the oven for 15-20 minutes on HIGH to burn o manufac-
Before first use, run the oven for 15-20 minutes on HIGH to burn o manufac-
turing remnants.
turing remnants.
STEP 01
ensure there is one (1)
AA battery under the battery cap�
Clean the battery and appliance
Clean the battery and appliance
contacts prior to battery installation.
contacts prior to battery installation.
Clean the battery and appliance Clean the battery and appliance
contacts prior to battery installation.contacts prior to battery installation.
IGNITIoN INsTRUCTIoNs
1. CHECK VALVES
ensure gas is oFF before checking appliance valves�
STEP 01
Turn all knobs to the
❶
❶
oFF position�
STEP 02
Push in knob and release� Knob should spring back�
If knobs
If knobs
do NoT
do NoT
spring back, replace valve assembly before using appliance.
spring back, replace valve assembly before using appliance.
STEP 03
Rotate knob to loW then turn back to oFF� Knob should
turn smoothly�
STEP 04
Connect and turn oN the gas, as applicable�
(Please reference the gas connection section.)
(Please reference the gas connection section.)
HEALTHY FLAME PATTERN YELLOw OR IRREGULAR
3. ALwAYS CHECK BURNER FLAME BEFORE USE.
light burners and look below the cooking surface to view burners�
When knob is at HIGH, flames should be larger than when knob
is at loW�
3. ALwAYS CHECK BURNER FLAME BEFORE USE.
light burner and look below the turntable to view burner� When knob
is at HIGH, flames should be larger than when knob is at loW�
Flickers of yellow.
Flickers of yellow.
dark blue.
dark blue.
Vibrant blue.
Vibrant blue.
If flames are yellow or irregular,
If flames are yellow or irregular,
please reference the Troubleshooting
please reference the Troubleshooting
chapter.
chapter.
HEALTHY FLAME PATTERN YELLOw OR IRREGULAR
Flickers of yellow. Flickers of yellow.
dark blue. dark blue.
Vibrant blue. Vibrant blue.
If there is a sudden drop or low If there is a sudden drop or low
flame issue, please reference the flame issue, please reference the
Troubleshooting chapter. Troubleshooting chapter.
WARNING
If burner does not ignite with open gas supply valve, gas
will continue to flow out of burner and could accidentally/
inadvertently ignite with risk of injury.
If ignition does not occur in 5 seconds:
1. Turn the burner control knob OFF.
2. Wait 5 minutes.
3. Repeat the lighting procedure.
If burner does not ignite, please reference the Troubleshooting chapter.
If burner does not ignite, please reference the Troubleshooting chapter.
WARNING
If burner does not ignite with open gas supply valve, gas
will continue to flow out of burner and could accidentally/
inadvertently ignite with risk of injury.
If ignition does not occur in 5 seconds:
1. Turn the burner control knob OFF.
2. Wait 5 minutes.
3. Repeat the lighting procedure.
If burner does not ignite, please reference the Troubleshooting chapter. If burner does not ignite, please reference the Troubleshooting chapter.
Model(s): 2400 • 2404
09

ENGLISH
BLACKSTONEPRODUCTS.COM
OWNER’S MANUAL | OPERATION INSTRUCTIONS
NEw YORK STYLE PIZZA DOUGH
1 hour 30 min�
STEP 01
Add water, flour, yeast, honey together in a large bowl� (don’t
add the oil and salt yet� You want the flour to hydrate first before
adding oil�)
STEP 02
Mix the dough until most of the flour is incorporated�
STEP 03
Add the oil and salt and knead your dough for 5-10 minutes�
STEP 04
Cover dough and let it rest for 10-15 minutes�
STEP 05
divide the dough into 3 pieces and round into balls� Wipe the
dough balls with oil or cooking spray�
STEP 06
Cover dough balls and let rise for about an hour�
HOw TO STRETCH PIZZA DOUGH
Important: Having your dough at room temp will make stretching it
much easier� Cold dough is very diicult to work with�
STEP 01
Generously flour your prep surface to prevent dough
from sticking�
STEP 02
Flatten the dough with the palm of your hand, starting
from the center out� Using a rolling pin is fine but won’t give you a
puy crust�
STEP 03
Pick up the dough and put it on the back of your hands�
Rotate the dough from hand to hand letting gravity do most of the
work stretching it out�
Note: Use a small amount of flour, semolina, or cornmeal on your
pizza peel to prevent sticking�
INGREDIENTS
• 4 cups of bread flour
• 1 and 1/2 cups of warm water
• 1 teaspoon of instant dry yeast
• 3 teaspoons of honey
• 2 teaspoons of salt
• 4 teaspoons of olive oil
CLASSIC MARGHERITA
• • Tomato sauceTomato sauce
• • Grated parmesan cheeseGrated parmesan cheese
• • Basil leavesBasil leaves
• • Fresh mozzarellaFresh mozzarella
• • light drizzle of olive oillight drizzle of olive oil
THAI SwEET CHILI
• • sweet Thai chili saucesweet Thai chili sauce
• • Chopped cooked chickenChopped cooked chicken
• • Thinly sliced red onionThinly sliced red onion
• • Chopped fresh cilantroChopped fresh cilantro
• • shredded mozzarella cheeseshredded mozzarella cheese
BBQ CHICKEN
• • Your favorite BBQ sauceYour favorite BBQ sauce
• • Chopped cooked chickenChopped cooked chicken
• • Thinly sliced red onionThinly sliced red onion
• • shredded mozzarella cheeseshredded mozzarella cheese
NEw YORK STYLE PIZZA DOUGH
1 hour 30 min�
STEP 01
Add water, flour, yeast, honey together in a large bowl� (don’t
add the oil and salt yet� You want the flour to hydrate first before
adding oil�)
STEP 02
Mix the dough until most of the flour is incorporated�
STEP 03
Add the oil and salt and knead your dough for 5-10 minutes�
STEP 04
Cover dough and let it rest for 10-15 minutes�
STEP 05
divide the dough into 3 pieces and round into balls� Wipe the
dough balls with oil or cooking spray�
STEP 06
Cover dough balls and let rise for about an hour�
HOw TO STRETCH PIZZA DOUGH
Important: Having your dough at room temp will make stretching it
much easier� Cold dough is very diicult to work with�
STEP 01
Generously flour your prep surface to prevent dough
from sticking�
STEP 02
Flatten the dough with the palm of your hand, starting
from the center out� Using a rolling pin is fine but won’t give you a
puy crust�
STEP 03
Pick up the dough and put it on the back of your hands�
Rotate the dough from hand to hand letting gravity do most of the
work stretching it out�
Note: Use a small amount of flour, semolina, or cornmeal on your
pizza peel to prevent sticking�
INGREDIENTS
• 4 cups of bread flour
• 1 and 1/2 cups of warm water
• 1 teaspoon of instant dry yeast
• 3 teaspoons of honey
• 2 teaspoons of salt
• 4 teaspoons of olive oil
CLASSIC MARGHERITA
•
•
Tomato sauce
Tomato sauce
•
•
Grated parmesan cheese
Grated parmesan cheese
•
•
Basil leaves
Basil leaves
•
•
Fresh mozzarella
Fresh mozzarella
•
•
light drizzle of olive oil
light drizzle of olive oil
THAI SwEET CHILI
•
•
sweet Thai chili sauce
sweet Thai chili sauce
•
•
Chopped cooked chicken
Chopped cooked chicken
•
•
Thinly sliced red onion
Thinly sliced red onion
•
•
Chopped fresh cilantro
Chopped fresh cilantro
•
•
shredded mozzarella cheese
shredded mozzarella cheese
BBQ CHICKEN
•
•
Your favorite BBQ sauce
Your favorite BBQ sauce
•
•
Chopped cooked chicken
Chopped cooked chicken
•
•
Thinly sliced red onion
Thinly sliced red onion
•
•
shredded mozzarella cheese
shredded mozzarella cheese
CooKING oN YoUR BlACKsToNe
CAUTIoN
This appliance will be hot during and after use. Use long-
handled utensils and oven mitts/ protective gloves when
handling potentially hot parts, including handles close to the
appliance body, to protect against burns and splatters.
CLEANING YOUR OVEN INTERIOR
STEP 01
Apply a strong solution of detergent and water, or use an
oven cleaner with scrub brush on insides of oven lid and floor� Rinse
and allow to completely air dry�
STEP 02
Reference the Troubleshooting chapter for instructions on
cleaning the burner�
VIDEO RECIPES
Find recipes and cooking tips at:
BlackstoneProducts.com/recipes
youtube.com/BlackstoneGriddles
@blackstoneproducts
HOw TO USE YOUR PIZZA OVEN
The thermometer measures the air temperature in the oven, NoT the
stone temperature� Use an infrared thermometer (not included) to
measure the bottom stone temperature� Proper stone temperature
is critical for consistent results.
Pizza cooking time is about 2-4 minutes depending on the size and
thickness of the pizza�
• Thinner foods should be cooked at a higher temperature for a
shorter time�
• Thicker or denser foods should be cooked at a lower temperature
for a longer time�
Pro Tip: If your crust is consistently undercooked wait before
launching the pizza until the stone reaches a higher temperature
than your previous cook�
Pro Tip: orient the pizza oven so that the back of the oven
blocks any wind�
NEAPOLITAN THIN CRUST PIZZA
STEP 01
Turn on stone rotation�
STEP 02
Heat up oven with the door closed and burners on high until
the thermometer reads 700° F�
STEP 03
launch pizza and cook with door closed and burners on
medium or high depending on crust thickness until pizza is done�
TAKE & BAKE PIZZA
STEP 01
Turn on stone rotation�
STEP 02
Heat up oven with the door closed until the thermometer
reads 400° F�
STEP 03
launch pizza and cook with door open and the burners on
low until pizza is done�
FROZEN PIZZA
STEP 01
Turn on stone rotation�
STEP 02
Heat up oven with the door closed until the thermometer
reads 400° F�
STEP 03
launch pizza and cook with door open and the burners on
low until pizza is done�
STRAwBERRIES AND CREAM
PANCAKES
BreakfastBreakfast
TACOS BORRACHOS
dinnerdinner
OKLAHOMA FRIED ONION BURGER
lunchlunch
Model(s): 2400 • 2404
10

BLACKSTONEPRODUCTS.COM
ENGLISH
| OWNER’S MANUALOPERATION INSTRUCTIONS
APPLIANCE STORAGE
WARNING
DO NOT move the appliance when in use. Allow the appliance
to cool to 115°F (45°C) before moving or storing.
Cover your appliance with a hard or soft cover or carry bag (as appli-
cable) when stored outdoors� do NoT store where water will pool�
FIND MY COVER
BlackstoneProducts.com
• Covers
• Carry bags
CARe ANd MAINTeNANCe
WARNING
Grease build up can cause a fire. Clean any part of the
appliance that gets hot and experiences grease build up
after each use.
CAUTIoN
All cleaning and maintenance should be carried out when the
appliance is cool and everything is turned OFF.
• do NoT use abrasive pad on areas with graphics�
• If a bristle brush is used to clean any of the cooking surfaces,
ensure no loose bristles remain on cooking surfaces prior
to cooking�
APPLIANCE BODY:
Wash with warm soapy water and immediately wipe dry with a
non-abrasive cloth� (do NoT allow cleaning agents to rest on any
porous surface for a prolonged amount of time�)
NOTICE
DO NOT use Citrisol, abrasive cleaners, or a concentrated
cleaner on the appliance. This may result in damage to and
failure of parts.
CooKING oN YoUR BlACKsToNe
CAUTIoN
This appliance will be hot during and after use. Use long-
handled utensils and oven mitts/ protective gloves when
handling potentially hot parts, including handles close to the
appliance body, to protect against burns and splatters.
CLEANING YOUR OVEN INTERIOR
STEP 01
Apply a strong solution of detergent and water, or use an
oven cleaner with scrub brush on insides of oven lid and floor� Rinse
and allow to completely air dry�
STEP 02
Reference the Troubleshooting chapter for instructions on
cleaning the burner�
VIDEO RECIPES
Find recipes and cooking tips at:
BlackstoneProducts.com/recipes
youtube.com/BlackstoneGriddles
@blackstoneproducts
HOw TO USE YOUR PIZZA OVEN
The thermometer measures the air temperature in the oven, NoT the
stone temperature� Use an infrared thermometer (not included) to
measure the bottom stone temperature� Proper stone temperature
is critical for consistent results.
Pizza cooking time is about 2-4 minutes depending on the size and
thickness of the pizza�
• Thinner foods should be cooked at a higher temperature for a
shorter time�
• Thicker or denser foods should be cooked at a lower temperature
for a longer time�
Pro Tip: If your crust is consistently undercooked wait before
launching the pizza until the stone reaches a higher temperature
than your previous cook�
Pro Tip: orient the pizza oven so that the back of the oven
blocks any wind�
NEAPOLITAN THIN CRUST PIZZA
STEP 01
Turn on stone rotation�
STEP 02
Heat up oven with the door closed and burners on high until
the thermometer reads 700° F�
STEP 03
launch pizza and cook with door closed and burners on
medium or high depending on crust thickness until pizza is done�
TAKE & BAKE PIZZA
STEP 01
Turn on stone rotation�
STEP 02
Heat up oven with the door closed until the thermometer
reads 400° F�
STEP 03
launch pizza and cook with door open and the burners on
low until pizza is done�
FROZEN PIZZA
STEP 01
Turn on stone rotation�
STEP 02
Heat up oven with the door closed until the thermometer
reads 400° F�
STEP 03
launch pizza and cook with door open and the burners on
low until pizza is done�
STRAwBERRIES AND CREAM
PANCAKES
BreakfastBreakfast
TACOS BORRACHOS
dinnerdinner
OKLAHOMA FRIED ONION BURGER
lunchlunch
CLEANING YOUR GRIDDLE TOP
Clean griddle top after each use, while still warm�
• do NoT use soap on the griddle top� This will destroy the griddle’s
seasoning�
STEP 01
Push loose food debris
into the grease cup with spatula
or straight metal scraper�
STEP 02
Wipe down griddle
top with a paper towel or a
Blackstone scrub Pad.
STEP 03
Apply a few tablespoons
of water to the griddle surface,
then scrape the water and debris
into the grease cup�
(For stuck-on food residue, use a
bit of coarse salt�)
STEP 04
Wipe again with a paper
towel and dry completely�
STEP 05
Apply thin coat
of cooking oil to maintain
seasoning and protect the
griddle top�
VIDEO TUTORIAL
How to Clean your Blackstone Griddle
youtube.com/watch?v=-Iedu9z6NPY
HOw TO USE YOUR PIZZA OVEN
FRESH PIZZA
STEP 01
Preheat your oven on high for about 12-15 minutes�
STEP 02
once the desired stone temperature is reached (650°-750°F
(340°- 400°C) for fresh dough pizza), turn the control knob to low�
depending on what you are cooking, you may adjust the temperature
while cooking to achieve desired results�
Note: The thermometer only measures the air temperature in the
oven, NoT the stone temperature� Use an infrared thermometer (not
included) to measure the bottom stone temperature� Proper stone
temperature is critical for consistent results.
STEP 03
Pizza cooking time is about 2-4 minutes depending on the
size and thickness of the pizza�
• Thinner foods should be cooked at a higher temperature for a
shorter time�
• Thicker or denser foods should be cooked at a lower temperature
for a longer time�
STEP 04
Pull the pizza out when the crust has reached your desired
readiness, or when the edges of the pizza crust are golden-brown�
FROZEN PIZZAS, COOKIES, ETC.
Follow the food manufacturer’s directions� let frozen food thaw a
little before putting it into the hot oven� This will prevent your pizza
stone from cracking�
CLEANING YOUR OVEN INTERIOR
If the pizza falls o the rotating stone and catches on fire:
STEP 01
Turn oFF the control knob, turn oFF the lPG cylinder, turn
oFF the rotating motor�
STEP 02
Allow the oven to completely cool�
STEP 03
Remove the oven lid, the top stone, and the lower stone�
STEP 05
Use a spatula to scrape and remove debris from cooking
cavity floor� Wipe cooking cavity with a damp cloth� do NoT use
detergent�
STEP 06
Use a vacuum if necessary to clean out food debris inside
cooking chamber�
If necessary, reference the Troubleshooting chapter for instructions on If necessary, reference the Troubleshooting chapter for instructions on
cleaning the burner.cleaning the burner.
STEP 04
Remove the turntable
by removing the two (2) bolts
that attach the turntable to the
rotating shaft�
CLEANING YOUR PIZZA STONE
set your oven to HIGH for 15~20 min to burn o residue�
NOTICE
DO NOT use soap on the cooking stone. This will leave a soap
taste in food.
EMPTY YOUR GREASE CUP
The grease cup must be removed and emptied after each use�
Note: Making sure your griddle is on level ground will allow grease
and water to drain towards the rear grease cutout�
CAUTIoN
Grease cup will be hot during and after use. DO NOT remove
the grease cup until the griddle has completely cooled.
Model(s): 2400 • 2404
11

ENGLISH
BLACKSTONEPRODUCTS.COM
OWNER’S MANUAL | TROUBLESHOOTING
POSSIBLE CAUSES SOLUTION
something is blocking the
venturi in the burner�
Clean the burner assembly to
remove the obstruction�
POSSIBLE CAUSES SOLUTION
obstructions in the burner, gas
jets, or fuel rail�
Clean the burner, jets, and gas
hose�
Gas cylinder is empty or low�
Refill or replace the gas cylinder�
The regulator’s flow limiting
device was triggered�
Reset the safety system:
STEP 01
Turn oFF the appliance,
close the gas cylinder valve, and
disconnect the regulator from
the gas cylinder�
STEP 02
Wait five minutes to
allow the pressure to dissipate,
then reconnect the regulator to
the gas cylinder and slowly open
the gas cylinder hand wheel one
to three turns�
STEP 03
Ignite your appliance�
Regulator stuck in safety
position�
Contact customer support for
replacement parts�
GAS FLOw TROUBLESHOOTING
APPLIANCE wILL NOT ACHIEVE A HIGH HEAT OR HEATS UNEVENLY:
• A flame is coming out of
the air gate�
• Burner flames are yellow or irregular�
• Burner flames start strong, then immediately drop to low even
when burner is set to high position�
• Flame height drops when a second burner is lit�
• Flames do NoT extend the full length of the burner, or only run on
one side of the burner�
• Burner flames are inconsistent�
IGNITION TROUBLESHOOTING
BURNER wILL NOT IGNITE:
If ignition does not occur in 5 seconds:
STEP 01
Turn the burner control knob oFF�
STEP 02
Wait 5 minutes�
STEP 03
Repeat the lighting procedure�
If this does not work, to determine the cause, please try to ignite your appli-
If this does not work, to determine the cause, please try to ignite your appli-
ance with a match.
ance with a match.
MATCH LIGHTING INSTRUCTIONS
Before beginning, check for gas leaks. open hood (if applicable).
Before beginning, check for gas leaks. open hood (if applicable).
STEP 01
Turn control knob to oFF position�
STEP 04
Push in and turn the control knob to start gas flowing�
ensure burner lights and stays lit�
STEP 02
light a match (or long
lighter) no shorter than 11
inches long�
STEP 03
Place the flame next to
the burner�
IF YOU CAN IGNITE YOUR APPLIANCE wITH A MATCH:
POSSIBLE CAUSES SOLUTION
Ignitor wire misaligned� ensure that the ignitor needle
is positioned 3-7mm (1/8-1/4 inch)
away from the burner, and
aligned with the burner holes�
damage to the ignition system� Contact customer support for
replacement parts�
IF YOU CAN NOT IGNITE YOUR APPLIANCE wITH A MATCH:
POSSIBLE CAUSES SOLUTION
Burner tubes are not receiving
fuel�
Clean the burner assembly to
remove the obstruction�
Burner
Burner
Air gate
Air gate
Gas rail & valves
Gas rail & valves
3-7mm
3-7mm
(1/8-1/4 inch)
(1/8-1/4 inch)
dead / improperly installed
battery�
For recycling and disposal of batteries For recycling and disposal of batteries
to protect the environment, please to protect the environment, please
check the internet or your local phone check the internet or your local phone
directory for local recycling centers directory for local recycling centers
and / or follow local government and / or follow local government
regulations.regulations.
Replace with new battery�
•
•
ensure the battery is installed
ensure the battery is installed
correctly with regard to polarity
correctly with regard to polarity
(+ and -).
(+ and -).
•
•
Remove batteries from equip-
Remove batteries from equip-
ment that is not to be used for an
ment that is not to be used for an
extended period of time.
extended period of time.
•
•
Remove used batteries promptly.
Remove used batteries promptly.
Model(s): 2400 • 2404
TROUBLESHOOTING
12

BLACKSTONEPRODUCTS.COM
ENGLISH
| OWNER’S MANUALTROUBLESHOOTING
STEP 01
Remove the turntable�
STEP 02
Use compressed air to blow out the burner scallops� (Wear
eye protection)
STEP 03
Remove the bolt and burner cap�
Note: do NoT disturb the ignitor needle or thermocouple
while cleaning�
STEP 04
Clean the inside of the burner:
• Run a narrow bottle brush through the burner several times� (do
NoT use wire brushes)
• Use compressed air to blow out the burner� (Wear eye protection)
STEP 05
Replace burner cap and bolt�
If problems persist, contact customer support�
STEP 02
❶
❶
Remove the base panel cover
from the base of the unit�
❷
❷
disconnect the orifice
nozzle and gas line from the
burner tube�
STEP 03
Use compressed air to
clear the burner tubes�
Note: once reinstalled, the
gas line should be leak tested
to ensure there are no holes
in the line�
The gas rail fuel nozzle
must be reengaged within the
burner opening�
VIDEO TUTORIAL
Pizza oven Troubleshooting
CLEANING THE BURNER ASSEMBLY
CAUTIoN
All cleaning and maintenance should be carried out when the
appliance is cool and with the fuel supply turned OFF at the
gas cylinder.
spiders and insects can nest within and clog the burner/venturi tube
at the orifice�
spiders and insects can nest within and clog the burner/venturi tube
at the orifice� To reduce chance of “flash-back” the procedure below
should be followed at least once a month when spiders are most
active or when your appliance has not been used for a period of time�
CLEANING THE BURNER ASSEMBLY
CAUTIoN
All cleaning and maintenance should be carried out when the
appliance is cool and with the fuel supply turned OFF at the
gas cylinder.
STEP 01
Run a nylon brush over
the outer surface of the burner to
remove grime�
WARNING
A clogged burner can
lead to a fire beneath the
appliance.
Burner should be removed
and cleaned whenever
blockages are found.
❶
❶
❷
❷
BoltBoltBurner capBurner cap
Ignitor Ignitor
needleneedle
ThermocoupleThermocouple
Fuel nozzle
Fuel nozzle
Burner opening
Burner opening
Model(s): 2400 • 2404
13

ENGLISH
BLACKSTONEPRODUCTS.COM
OWNER’S MANUAL | CUSTOMER SUPPORT
In no event shall North Atlantic Imports, llC be liable for consequen-
tial, indirect or incidental damages resulting from the installation,
use or failure of the product�
This warranty does NoT cover:
• Inspection costs or labor for replacement of any defective part(s);
• Cosmetic defects which do NoT aect product performance or
integrity;
• Normal wear and tear;
• damage due to vandalism; acts of nature, including but not limited
to wind, storms, hail, floods;
• Improper assembly, installation, or use;
• discoloration or fading of the finish as a result of exposure to chem-
icals, spills, pool or salt water;
• Corrosion/ rust�
This product has been designed for safety and quality� Any modifica-
tions made to the original product could compromise its structural
integrity or function and could lead to product failure or personal
injury� As such, modifying this product voids all warranties�
This product is for ResIdeNTIAl Use oNlY, and is not for commercial,
contract or other non-residential purposes� North Atlantic Imports,
llC disclaims all other representations and warranties of any kind,
express or implied�
The warranty applies to the original purchaser and is non-trans-
ferable� It does not apply to accessories or parts not supplied with
the product, to purchases of display models, or to product that is
sold on clearance or “as is”� You may, however, have other specific
legal rights based on the laws of your specific state or country of
residence�
To activate your warranty, register your product at
North Atlantic Imports, llC reserves the right to change or modify
this warranty at any time�
CONTACT US
For all questions, inquiries, or customer support, please contact:
ONE YEAR wARRANTY
North Atlantic Imports, llC warrants this product against defects
in materials and workmanship for a period of one (1) year from the
original date of purchase under normal use� To the extent any such
defects occur, North Atlantic Imports, llC, in its discretion, will
provide the appropriate replacement part(s) at no charge�
USA & CANADA
BlackstoneProducts�com/support
• Monday – Friday | 7:00 am – 5:00 pm (MsT/MdT)
• english and spanish
BlackstoneProducts.com/register
FRee
e-CooKBooK
WHeN YoU ReGIsTeR
SERIAL NUMBER LOCATION
To enable your warranty, you will need to provide your appliance’s
serial Number�
The serial Number can be found on your appliance’s
Manufacturer label�
(The Manufacturer label is a large silver sticker found on the body of your
(The Manufacturer label is a large silver sticker found on the body of your
appliance.)
appliance.)
������������������������������������������
��������������������������
���������������������������������
����������������������������������������
��������������������������������������
����������������������������������
���������������������������������������
���������������������������
������������������������������������
��������������������������������������
����������������������������������������
����������������������������������������
��������������������������
������������������������������������������
�����������������������������
����������������������������������
�����������������������������������������
����������������������������������������
������������������������������������������
����������������������������
����������������������������
����������������������������������������������������
�������������������������������������������������
��������������������������������
���������������������������������������
���������������������������������������������������
����������������������������������������������������
������������������������������������������������������
��������������������������������
��������������������������������������������
��������������������������������������������������
�������������������������������������������������
������������������������������������������������������
��������
����������������������������������������������������
����������������
����������������
����������������
����������������
�����������������������������������
����������������
������������������������
��������������������������������
��������������������������������
������������
������������������������������������������
��������������������������
���������������������������������
����������������������������������������
��������������������������������������
����������������������������������
���������������������������������������
���������������������������
������������������������������������
��������������������������������������
����������������������������������������
����������������������������������������
��������������������������
������������������������������������������
�����������������������������
����������������������������������
�����������������������������������������
����������������������������������������
������������������������������������������
����������������������������
����������������������������
����������������������������������������������������
�������������������������������������������������
��������������������������������
���������������������������������������
���������������������������������������������������
����������������������������������������������������
������������������������������������������������������
��������������������������������
��������������������������������������������
��������������������������������������������������
�������������������������������������������������
������������������������������������������������������
��������
����������������������������������������������������
��������
��������
��������
��������
��������
����������������
����������������
����������������
����������������
�����������������������������������
����������������
������������������������
��������������������������������
��������������������������������
������������
☞
Please contact us before returning this appliance to your retailer�
Model(s): 2400 • 2404
CUSTOMER SERVICE
14

BLACKSTONEPRODUCTS.COM
ENGLISH
| OWNER’S MANUAL
This page intentionally left blank
Model(s): 2400 • 2404
15

ENGLISH
BLACKSTONEPRODUCTS.COM
This product may be covered by one or more issued U�s� and/or
international patents and may include patent applications pending�
For more information, please visit: BlackstoneProducts�com/patents
dIsTRIBUTed BY NoRTH ATlANTIC IMPoRTs, llC 1073 W 1700 N loGAN, UT 84321 UsA | BlACKsToNe Is A ReGIsTeRed TRAdeMARK oF NoRTH ATlANTIC IMPoRTs, llC
©2024 NoRTH ATlANTIC IMPoRTs� All RIGHTs ReseRVed�
16
