Swan 3
Model: I25D03
User Manual
This device has the following options:
15.6” Display 15.6” Display + 10.1'' Display
15.6” Display + 10.1" Payment Display
Introduction
LCD Display
Pogo Pin
2 x USB Type-A
Pogo Pin
USB
Type-C
RJ12 Port USB Type-A RJ45 Port
Earphone JackDC-In Jack RJ11 Port USB Type-A TF Slot
Power Button
The terms HDMI, HDMI High-Definition Multimedia Interface,
HDMI Trade dress and the HDMI Logos are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
Technical Specif ication
OS
CPU
Main LCD Display
Vice LCD Display (optional)
Storage
WLAN
Bluetooth
Speaker
External Interface
Power Adapter
Machine Size
Operating Temperature
Storage Temperature
Operating Humidity
Limit Altitude
Extended Support
Android 15 (64 bit)
Octa-core (Dual-core Cortex-A76 + Hexa-core Cortex-A55) 2.0GHz
15.6 inches, resolution: 1920 x 1080, multi-touch capacitive screen
10.1 inches, 1280 x 800, with optional NFC / support Moby5500
4GB RAM (optional 8GB, 16GB) + 64GB ROM (optional 128GB, 256GB)
802.11 a/b/g/n/ac/ax
5.4BLE
1 x 3W
4 x USB Type-A, 1 x USB Type-C, 1 x RJ45, 1 x RJ12, 1 x RJ11, 1 x Earphone,
1 x , 1 x DC-in, 3 x Pogo Pin (6pin), 1 x TF Slot
Output power 60W, Input: AC100~240V, Output: DC24V/2.5A
370 x 181 x 306mm
-10℃ to +40℃
-20℃ to +60℃
5% to 95% r.H.
Max. 3500 meters
Digital Display
Camera
MSR
Payment Box
Name and Content of Toxic and Harmful Substances in This Product
: Means that the content of the toxic and harmful substances in all homogeneous materials of the component is below the limit
specif ied in 2011/65/EU, RoHS 2.0.
: Means that the content of the toxic and hazardous substances at least in a homogenous material of the component exceeds the
limit specif ied in 2011/65/EU, RoHS 2.0. However, the components marked with in the above table are out of proportion
because there is no mature alternative technology in the industry at present.
Products that have reached or exceeded the environmental protection service life should be recycled and reused in accordance with
the electronic information products control and management measures or local environmental laws and guidelines. They should not
be discarded at will or with household waste.
Toxic or harmful substances and elements
Pb Hg Cd Cr(VI) PBB PBDE
Part Name
Circuit Board
Display Screen
Plastic
Metallic
Connecting Cable
Others
(Power Adapter, Battery, etc.)
DBP BBP DEHP DIBP
Safety Information
Safety and Handling
· Please plug-in power adapter to only its corresponding AC
socket.
· Do not use in explosive gas atmosphere.
· Do not disassemble the equipment. It should be serviced or
recycled only by iMin or an authorised service provider.
· This is a Grade B product. The product may cause radio
interference and interfere with medical devices. The user
may be required to take practical measures to reduce the
possibility of causing interference to radios, televisions and
other electronic devices.
· About the battery replacement:
1. Do not attempt to replace the battery yourself - you may
damage the battery, which could cause overheating, f ire
and injury.
2. The replaced/ used battery should be disposed according
to local environmental laws and guidelines. Do not
dispose in f ire. It should be serviced or recycled by iMin
or an authorised service provider, and must be recycled
or disposed of separately from household waste.
Company Statement
Our company is not responsible for the following actions:
· Damage caused by misuse, lack of care in maintaining the
equipment, or placing the device under conditions that may
cause undesired operation and risk as specif ied in this
instruction manual.
· We will not be responsible for any damage or problem
caused by third party parts or components (other than the
original products or approved products provided by us).
Without our consent, you have no right to modify or alter
the products.
· The operating system of this product is supported by off icial
regular OS update. If the user breached the third party's
ROM system or change the system f ile by hacking, it may
cause unstable, undesired system operation and bring
security risk.
Advices
· Do not expose the device to moisture, dampness, or wet
weather, such as rain, snow or fog.
· Do not use the device in extreme cold or hot environments
eg, near a f ire or lit cigarette.
· Do not topple, throw, or bend.
· Use in optimally clean and dust-free environment to avoid
tiny particles clogging and seeping through gaps in the
device.
· Do not at tempt to use the device near medical equipment.
Important Safety Information
· Do not install or use during thunder storms and lightning
conditions, otherwise, there will be risk of electric shock,
injury or death in the event of thunder or lightning hit.
· If you f ind unusual odour, overheating or smoke, please cut
off the power immediately.
· Do not expose the device to moisture, dampness, or wet
weather, such as rain, snow or fog; Do not use in explosive
gas atmosphere.
Disclaimer
Due to regular updates and enhancements made to the
product, some details of this document may be inconsistent
with the physical product. Please take the product you
received as current standard. The right to interpret this
document belongs to our company. We reserve the right to
amend this specif icat ion without prior not ice.
FCC Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning
the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
Caution: Any changes or modif ications to this device not explicitly approved by manufacturer could void your authority to operate
this device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator and your body.
Warning
1. Please use common USB Cable or original charger, Otherwise, It may result to danger. When you use a charger for charging,
adapter shall be installed near the equipment and shall be easily accessible.
2. This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation
distance of 0mm must be maintained between the user’s body and the handset, including the antenna.
3. This product can be used across EU member states.
BT frequency range: 2402-2480MHz, Maximum E.I.R.P: 9.45dBm
BLE frequency range: 2402-2480MHz, Maximum E.I.R.P: 9.63dBm
2.4GWi-Fi frequency range: 2412-2472MHz, Maximum E.I.R.P: 14.76dBm
5.2GWi-Fi frequency range: 5180-5240MHz, Maximum E.I.R.P: 16.93dBm
5.3GWi-Fi frequency range: 5260-5320MHz, Maximum E.I.R.P: 16.92dBm
5.5GWi-Fi frequency range: 5500-5700MHz, Maximum E.I.R.P: 16.94dBm
5.8GWi-Fi frequency range: 5745-5825MHz, Maximum E.I.R.P: 10.93dBm
NFC frequency range: 15.36MHz, Maximum Result At 10m: 25.08dBm
RED 2014/53/EU
Declaration Of Conformity
This product can be used across EU member states .
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Hereby, iMin Technology Pte Ltd declares that this device is in compliance with the essential requirements and other relevant
provisions of directive 2014/53/EU.
AL: ALBANIA; BE: Belgium; BG: Bulgaria; HR: Hrvatska; CY: Cyprus; CZ: Czech Republic; DK: Denmark; EE: Estonia; FI: Finland;
FR: France; DE: Germany; EL: ElSalvad; HU: Hungary; IE: Ireland; IT: Italy; LV: Latvia; LT: Lithuania; LU: Luxembourg; MT: Malta;
NL: Netherlands; PL: Poland; PT: Portugal; RO: Romania; SK: Slovakia; SI: Siovenia; ES: Spain; SE: Sweden
AT BE BG CH CY CZ DE
DK
EE EL ES FI FR HR
HU IE IS IT LI LT LU
LV
MT NL PL
SI SK TR
PT RO
SE
ISED Statement
English:Thisdevicecomplieswith Innovation, Science and Economic Development Canada’slicense‐exemptRSSstandard(s).
Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseinterference,and(2)Thisdevicemustaccept
anyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.
ThedigitalapparatuscomplieswithCanadianCANICES‐
3(B)/NMB‐3(B).
F
rench: LeprésentappareilestconformeauxCNRd' Innovation, sciences et développement économique Canadaapplicables
auxappareils
radioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,
et(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptible
d'encompromettrelefonctionnement.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Caution
1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the EIRP limit;
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be
such that the equipment still complies with the EIRP limits specified for point-to-point and non-point-to-point operation as
appropriate; and Operations in the 5.25-5.35GHz band are restricted to indoor usage only.
Avertissement
1. les dispositifs fonctionnant dans la bande de 5150 à 5250MHz sont réservés uniquement pour une utilisation à l'intérieur af in de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
2. pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de
5250 à 5350MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e;
3. pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de
5725 à 5850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l'exploitation non point à
point, selon le cas; Les opérations dans la bande de 5.25-5.35GHz sont limités à un usage intérieur seulement.
