Technical Specs
ATTENTION
Warning
Read all instructions and safety information before use to avoid injury.
The limit operating ambient temperature of the device declared by
the manufacturer is -10~45°C.
Battery safety
Charge battery only at ambient temperatures ranging from 0~40°C.
Dispose of used batteries according to manufacturer’s instructions.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type of batt
ery recommended by the
manufacturer.
Statement
The equipment damage caused by natural disasters, falling, self
disassembly and non-compliance with the operation specifications is
not covered by the free warranty.
Some details of this document may be inconsistent with the real
object due to the update iteration of the product. Please take the real
object as the standard, and our company reserves the right to
interpret this document.
K1133
Quick Guide
Items Specification
Operating System
Android 11.0 go
CPU
Memory
1GB RAM + 8GB ROM (LPDDR4x)
Display
4.0” IPS, 480*480
Camera
2M FF
（
optional
）
Scanner
N/A
Cellular Network
Support 2g/3g/4g
WIFI
Bluetooth
Version 4.2, support BLE
Payment
Support IC/NFC Card/QR Code
Interface
USB type-C/POGO（optional）
Audio
Buzzer/Speaker（optional）
Battery
1800mAh/3.87V (Rated capacity)
IEEE 802.11 a/b/g/n/ac (2.4G&5G)
Product Diagram
NFC Card Reader
NFC antenna locates at the bottom of the screen. It’s used to sense
chip and acquire data through contactless way.
IC Card Reader
Used for inserting the bank chip card and getting information securely.
Display
Set for merchants to complete business settlement and for customers
to input the password to finish the payment .
Power Button
Used for change the running states of device, such as pressing 2~3
seconds to power on/off or screen capture and pressing 10 seconds to
restart automatically when device is crashed.
Card Slo
t
The card slot is on the right side of the device and can be pushed out
by holding the card pin like smart phones.
USB type-C
Used for device charging and plugging in peripheral device which
supports OTG.
Card Selection Instruction
Package List
NO.
Items list
Description
1
Device
Default
2
Battery
1800mAh/3.87V (unremovable)
3
USB cable
1pcs,1m/white/type-c
4
Adapter
1pcs,5V 2A/White（optional）
5
User manual
Neutral
6
Card Pin
Default
IC Card Reader
Power
Button
Card
Slot
NFC Card
Reader
Buzzer/Speaker(optional)
USB type-C
Front Camera(optional)
Decoration
POGO-PIN(optional)
4"Display with touch panel
FCC Statement
Any Changes or modifications not expressly approved by the party responsibl e for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR) :
This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/kg for body and 4.0W/kg for Limbs. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting
at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of
the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only
the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
The highest SAR value for the device as reported to the FCC when worn on the body, as described in this user guide, is 1.13W/kg Body SAR
(Body-worn measurements differ among devices, depending upon available enhancements and FCC requirements.)
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID: 2A2UU-K1133
For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the
positions the device minimum of 10 mm from the body . Use of other enhancements may not ensure compliance with FCC RF exposure guidelines.
