USER GUIDE
SPIN & GO
PORTABLE
CORDLESS
BLENDER
Scan for more,
videos, tips, recipes,
and more!
GREENPAN.US/PAGES/
SPIN-AND-GO-
PORTABLE-BLENDER
2 3
IMPORTANT
SAFEGUARDS
Before using this electrical appliance,
basic precautions should always be
followed. Before using the device and
its accessories, please read
all instructions.
If you let anyone else use your blender,
ensure they understand the safety information
in this User Guide and any additional safety
or usage instructions. Each person using this
blender should completely read the User
Guide to become familiar with the safe
operation of the unit.
POWER, CORD, & BATTERY SAFETY
A lithium-ion battery is the power
source for this portable blender.
Please read and follow all charging
instructions carefully.
1. This portable blender is powered by a
rechargeable battery and can operate
cordlessly once charged – no charging
cord or outlet is required during use.
To prevent accidental blade activation,
always make sure the blender is turned
OFF when not in use, when cleaning, or
when drinking directly from the cup lid.
2. This device contains non-replaceable
batteries and moving parts that may
pose a risk to the user. Do not attempt to
replace the battery by yourself. Contact
GreenPan Customer Service if battery is
damaged or malfunctioning.
3. Ensure the USB-C charger cord is fully
dried before recharging.
4. Even if this device is severely damaged,
please do not dispose of it casually.
Lithium-ion batteries may explode in a
fire, please recycle or dispose in a
proper way.
5. For safe use, charge and operate this
appliance only in environments between
32°F and 104°F. Use outside this range
may cause battery damage, overheating,
reduced performance, or hazard.
17. Avoid contact with battery fluid.
If a battery leaks:
Keep the leaked fluid from touching
your skin, eyes, clothes, or other
surfaces. If the battery fluid contacts
your skin, eyes, or clothes, immediately
rinse the affected area with water and
contact your doctor or other medical
providers as appropriate.
HEAT AND PRESSURE SAFETY
DO NOT mix hot, warm, or
effervescent liquids, as doing so
may increase pressure and pose
a risk of burns or other injuries
to the user.
1. DO NOT store ingredients for extended
amounts of time before or after blending
them. Some foods may contain active
ingredients or release gases that will
expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury.
2. Only blend room-temperature or
refrigerated ingredients (70°F/21°C
or cooler).
3. Effervescent ingredients (e.g., soda,
baking powder, baking soda, yeast,
some batters, cake mix, dry ice, or
other things that become bubbly)
release gasses that increase pressure
within the cup when blending. Some
protein powders include effervescent
ingredients.
4. Always check the ingredients of all
supplements before blending.
5. Excessive blending causes ingredients
to heat up, which builds pressure in the
cup over time. Continuous blending for
more than one minute may cause the
cup to separate, exposing the blade or
expelling heated contents and
causing injury.
CUP SAFETY
DO NOT fill food above the MAX line.
1. If the cup is hot or warm to the touch, the
contents may be heated and pressurized.
If this happens, take these steps:
• DO NOT OPEN. Leave the cup where
it is and do not touch it or allow others to
touch it. NEVER attempt to separate the
cup from the motor base as this can result
in injury.
• DO NOT blend again.
• Allow the cup to cool for at least 30
minutes. If still warm, allow for more
cooling time.
• Once cool to the touch, slowly open the
lid, while pointing away from your face
and body.
2. Operate only when the container
cup lid is tightened and drinking spout cover
is closed.
3. DO NOT use the cup if you detect
cracking, cloudiness, or other damage.
6. Only use the charging cord provided.
Using a charging cord that does not
correspond to the marking on the bottom
of the motor base can result serious injury
or fire.
7. To prevent the risk of fire caused by
battery damage, DO NOT immerse the
motor base in any liquid. Make sure the
blender cup is fully dried before storing
the base inside.
8. Inspect your charging cord regularly.
9. DO NOT let the charging cord touch hot
surfaces or any extreme heat source, or
become knotted, tangled, or frayed.
10. DO NOT grab or carry your device by
the charging cord.
11. To avoid the risk of electrical shock, fire
or bodily injury, DO NOT charge or
handle the unit if it is wet, or in an area
that could get wet, or handle with
wet hands.
12. DO NOT charge your device around
flammable materials, on your bed or
couch, or on top of any type of paper.
13. DO NOT charge in an area of extreme
heat or cold.
14. Always unplug the charging cord when
not in use.
15. DO NOT use your unit if the motor base
is overheated, has an odor, leaks, is
bulging, or changes in color/shape.
Leaks from battery cells can occur
under extreme conditions.
16. DO NOT use your unit in any high-heat
area, such as a cabinet above your oven
or stove, near a radiator or heater, or in
any area exposed to direct sunlight.
4 5
BLADE SAFETY
CAUTION: Blades are extremely
sharp, use caution when cleaning
the cup.
1. When loading and operating blender,
keep hands, hair, and clothing from the
cup or any area near the blades. After
removing the lid, the blade can still
be activated.
2. Before each use, please check blade.
If blade appears bent or is suspected
to be damaged, please stop using and
contact GreenPan Customer Service at
877-926-6526.
3. DO NOT attempt to sharpen the
blades yourself.
4. DO NOT attempt to remove the
container and/or drinking cup from the
motor base while the blade is running.
Before opening the lid or removing the
container, please make sure the device
has stopped running completely.
5. Always make sure the power is off
and the charger is unplugged when
assembling, disassembling, or cleaning
the cup or motor base.
6. Remove all utensils and non-food items
from cup before operating as it may
result in bodily injury or damage to the
blade and unit.
7. The blades may stop turning if the cup is
overfilled. If this occurs, please refer to
the Troubleshooting section in this
User Guide.
SURROUNDING/GENERAL SAFETY
DO NOT use blender while driving,
operating machinery, cycling,
walking, or engaging in other
activities that require your undivided
attention.
1. DO NOT leave blender inside your
vehicle, especially in the summer or
winter. Prolonged exposure to extreme
temperatures can cause the batteries to
leak, rupture, or explode.
2. Periodically inspect your blender
components for damage or wear that
may impair proper functioning or create
a safety hazard.
3. Please be careful when unpacking and
assembling the blender. This device
contains sharp blades, which may cause
injury if operated improperly.
4. Check all the contents to ensure you
have all necessary components to
operate the blender correctly. Before
using, please clean all parts that may
come into contact with food. Please
follow the washing instructions included
in this user guide.
5. Please remove all packaging contents
from the blender cup before processing
(blade not removable). If not removed,
it may cause damage or rupture of the
mixing container, resulting in
personal injury.
6. DO NOT store the device outdoors,
and do not let the motor base come into
contact with any liquid.
7. DO NOT allow children to operate this
appliance or use it as a toy: When using
any appliance, close supervision must be
carried out, especially near children.
8. This device is not suitable for individuals
with limited physical, sensory, or
intellectual abilities, or lacking experience
and knowledge, unless they have
received supervision or guidance from
personnel responsible for their safety.
9. DO NOT allow any part of the blender
to come into contact with hot surfaces,
including stoves and other
heating appliances.
10. Always use electrical appliances on
a dry and level surface.
11. Use only accessories and fittings
provided by the product or recommended
by GreenPan. Using accessories not
recommended or sold by GreenPan may
result in fire, electric shock, or injury.
12. When operating and handling equipment,
avoid contact with moving parts.
DO NOT put your hand
inside the blender.
DO NOT operate while
the cup is empty.
13. DO NOT microwave any containers or
accessories provided by the device.
14. This blender is not a grinder. DO NOT
grind dry goods in this blender without
adding any liquid.
15. DO NOT attempt to disrupt the
interlocking mechanism. Ensure that
the cup and lid are correctly installed
before blending.
16. DO NOT expose containers and
accessories to extreme temperatures.
They may be damaged.
17. DO NOT leave the device unattended
during use. If unmixed ingredients are
found sticking to the side wall of the cup,
please use the power button to turn off the
device and then use a scraper to
remove them.
18. DO NOT refrigerate or freeze the mixer
motor base.
19. If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, turn OFF the
GreenPan Portable Blender using the
Power Button and allow it to cool for at
least 30 minutes before using again.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
7
TAKE
YOURS
TO GO.
Welcome to the GreenPan Spin & Go Portable
Blender, the easiest way to mix while you’re on
the move. We have helpful tips and tricks to help
you get started making incredible smoothies, rich
protein shakes, and so much more. ENJOY!
Getting Started
08 What’s Included
09 Components
Controls
10 Control Panel
11 Battery Indicator Light
Blending
12 For the Perfect Blend
13 Important Helpful Tips
Cleaning & Storage
14 Cleaning & Storage
Power
15 Charging
Support
16 Important Warnings
17 Troubleshooting
18 Warranty
CONTENTS
8 9
BEFORE FIRST USE
Remove all packaging materials and the motor base from inside the blender cup.
CHARGE
Please fully charge this blender before first use. The charger port
is at the back side of base. See charging section of this User Guide for more details.
CLEAN
Clean all food-contact components. The cup and lid are dishwasher safe.
Remove the cup from the motor base before putting the cup and lid into dishwasher.
DO NOT place the motor base in the dishwasher or immerse the motor base into
any liquid.
For detailed cleaning instructions, please refer to page 14.
WARNING: Blades are sharp! Handle with care to avoid bodily injury.
WHAT’S INCLUDED COMPONENTS
A. Carry Handle
B. Leakproof Lid
C. 24 oz. Blender Cup
D. Blade (Not Removable)
E. Motor Base
1. DO NOT immerse the
base into any liquid.
2. Make sure blender cup is
fully dried before storing
motor base in it.
F. Measurement Markings
G. Battery Indicator Light
H. Power Button
I. Presets
J. USB-C Charging Port
K. USB-C Charging Cord
GETTING STARTED
A.
A. Lid with Drink Spout,
Cover, and Handle
B. 24 Oz. Cup (Fits up
to 17 Oz. of Max
Fill Ingredients for
Blending)
C. Motor Base
D. USB-C Charging Cord
C.
E.
J.
B.
F.
D.
K.
G., H., I.
10 11
BLEND:
Perfect for liquid-heavy recipes like iced coffee, sauces, and dressings.
• Thinner Protein Shake: liquid base + protein powder + banana + light ice
• Thinner Green Smoothie: liquid base + spinach + frozen fruit + fruit juice
• Iced Coffee Drinks: cold brew + milk + vanilla (or other flavor) + ice
• Sauces: tomato, salad dressings
SMOOTHIE:
Ideal for fruit- and veggie-forward smoothies with more solids than liquids.
• Mixed Berry Smoothie: frozen berries + banana + yogurt + milk
• Tropical Smoothie: mango + pineapple + coconut water + lime juice
• Breakfast Smoothie: strawberries + banana + oats + almond milk
• Antioxidant Smoothie: blueberries + spinach + banana + coconut milk
CRUSH:
Designed for ice and frozen ingredient-heavy beverages.
• Slushies: fruit juice + ice + fresh fruit pieces
• Frozen Cocktails: spirits + mixers + lots of ice for daiquiris, piña coladas, etc.
• Chocolate Milkshake: chocolate sauce + milk + ice + sweetener
• Smoothie Bowls: minimal liquid + frozen fruit + ice for thick, spoon-able texture
PULSE:
Gives precise control for recipes needing specific textures or gentle processing.
• Guacamole: avocado + lime + onion + tomato + cilantro
• Salsa: tomatoes + onions + peppers + cilantro + chili
• Hummus: chickpeas + tahini + lemon + oil + water
• Dips and Spreads: tapenade, French Onion, etc.
CLEAN:
To use the self-clean mode, add water + a drop of dish soap into the cup,
and press the Clean preset.
For best results on removing odors, add water + 1 drop of dish soap + 1 teaspoon
baking soda +1 teaspoon lemon juice, and press the Clean preset.
Smoothie
Crush
Pulse
Clean
Battery
Indicator
Light
Blend
On/Off
CONTROL PANEL
CONTRO LS
BATTERY INDICATOR LIGHT
SOLID WHITE: Charged.
SOLID RED: Low battery.
NO LIGHT: Charge battery.
Error Error Indication Solution
Blender cup not well
installed
4 LED slowly flashing Re-install cup
Blade gets stuck LED on Blend function slowly
flashing
Remove cup, shake cup several
times and install again
Battery indicator
light is red
Low battery Recharge
Auto-Lock/Standby 4 LED indicators oscillate Press power button, then your
desired mode
Unit overheat All 5 LED (4 modes & battery)
quickly flashing
Power off and let the blender
cool down for at least 30
minutes before next use
CORD CONNECTED:
Red or white flashing light: Charging
White solid light: Full charge and the cord should be removed
NOTE: You are unable to operate while charging. Operation lockout
during charge is to prevent overheating.
*Unit will not charge if overheat error is present.
NOTE: Light colors may vary slightly.
NOTE: This blender can deliver consecutive blends, but with heavy use the
blender will automatically go into rest mode to avoid overheating. Let the unit
rest before starting again.
12 13
FOR THE PERFECT BLEND IMPORTANT HELPFUL TIPS
BLENDING
HOW TO ADD INGREDIENTS
FOR BEST RESULTS
Layer your ingredients for optimal performance: start with liquids, then add fresh fruits
or vegetables, followed by leafy greens or herbs. Next, include seeds, powders, or
nut butters, and finish with ice or frozen items.
1. Open the cup lid and add your ingredients. If ice cubes are used, please add
them last. Then secure the lid and close the drinking spout. Refer to How to Add
Ingredients for Best Results (page 12) when filling.
NOTE: The blending capacity of this cup is 17 oz./500mL. DO NOT overfill
the cup with ingredients past the max fill line.
2. Install the cup onto the base and rotate it clockwise until you hear
it click into place.
3. Press and hold POWER button for 2 secs to turn on the device. The indicator
light will turn fully white, and the battery level will be displayed.
NOTE: After 15 seconds of no operation, the device goes into Auto-lock mode
(lights will be oscillating). The program will lock the unit to prevent accidental
operation. The user must press the power button to unlock the unit, then select
their desired mode for operation.
4. Press the preset for your blend.
5. After blending or self cleaning, ensure the blade stops rotating before removing
the cup from the motor base. The cup can be detached from the motor base for
drinking. If you want to drink with the motor base attached, please turn off the
motor before drinking.
6. Press and hold the power button for 2 seconds to turn off the blender.
7. Open the cap and drink or pour.
8. Refer to the Cleaning & Storage section on page 14 for cleaning
and storage instructions.
WARNINGS:
NOTE: If the blade gets stuck, the cup can be inverted for a few seconds,
then slowly placed upright before resuming.
NOTE: The blade is very sharp. Handle with care.
DO NOT mix hot, warm, or effervescent liquids, as doing so may increase pressure
and pose a risk of burns or other injuries to the user.
DO NOT fill ingredients above the MAX line.
5. FROZEN
At the top, finish with ice
or frozen ingredients.
4. PROTEIN
Add sticky ingredients (e.g.
nut butter), seeds & protein
powders here.
3. GREENS
Add your greens.
2. FRUITS
Layer on your fresh fruits.
1. LIQUID
At the bottom, always start
with liquid ingredients.
14 15
CLEANING & STORAGE CHARGING
WARNING: Even if the lid is open or removed, the blade can still spin.
Always remove the cup from the motor base before cleaning.
NOTE: Blade is not removable. The blade is very sharp. Handle with care.
CLEAN MODE
1. Remove the cup from motor base and remove the lid from the cup.
2. Pour 10-16 oz. of clean water into the cup, then add a small drop
of dishwashing detergent.
3. Secure the lid onto the cup, then connect cup to motor base
and press the “CLEAN” button (Fig. 1).
4. Stop the program after one minute.
5. Remove the cup from motor base, pour out the contents,
and rinse the container and lid with warm water.
HAND WASHING
1. Remove the cup from motor base and clean the lid and cup with
warm soapy water.
2. NEVER put your hand inside the cup. Due to the sharp blade, please empty
contents and rinse the cup and lid with warm water.
3. DO NOT let the motor base come into contact with water or other liquids.
Let all components fully air-dry before storing.
MOTOR BASE
• The motor base cannot be cleaned in a dishwasher and should
not be exposed to water or other liquids.
• If necessary, please wipe the motor base with a damp cloth.
DISHWASHER SAFE PARTS
• Only the cup and lid can be put in the dishwasher.
STORAGE
• Store the device upward in a cool and dry place.
• DO NOT store mixed or unmixed ingredients in the cup.
• DO NOT stack items on the device.
NOTE: Make sure the blender cup is fully dried before storing base inside.
NOTE: The Spin & Go packs together for compact storage (Fig. 2).
(Fig. 2)
(Fig. 1)
CLEANING & STORAGE
POWER
HOW TO RECHARGE
• Please fully charge this blender before first use, approximately 70 minutes.
The charging port is at the back side of motor base. Always use the supplied
USB-C charging cord.
• When charging, the indicator light flashes. When fully charged, the battery
indicator light will remain solid white.
• Recharging takes approximately 60-70 minutes. The charger outlet should
be at least 25W to ensure a fast charge.
DO NOT use a computer USB as a charging port. For more information about
charging status, please refer to the battery indicator light section.
NOTE: When disconnecting the cord, pull on the plug, DO NOT pull on the cord.
NOTE: Ensure the USB-C charger cord & port are fully dry before charging.
WARNING: Do not charge if your unit or the USB-C port is wet to avoid risk
of fire or bodily injury.
16 17
TROUBL ESHOOTING
WARNINGS
TROUBLESHOOTING
Issue Cause Solution
Not blending - 4 LEDs
slowly flashing
Blender cup not installed
properly
Re-install cup
All 5 LED (4 modes &
battery) quickly flashing
Unit overheat Power off and let the blender
cool down for at least 30 minutes
before next use
Battery indicator
light is red
Low battery Use charging cord to recharge
battery to full power
Not responding to
mode selection- 4 LED
indicators oscillating
Auto Lock/Standby Press power button first, then
select mode
Machine won't start Battery is dead Use charging cord to recharge
battery to full power
Ingredients not
well mixed
Not adding ingredients in
proper order
Ensure you are adding
ingredients in the suggested
order - Refer to section Usage
Guide
Ingredients not
well mixed
Incorrect setting Ensure to use the proper setting
BLEND: for protein, milkshake
drinks
SMOOTHIE: for fruit drinks
CRUSH: for ice crushing and
frozen drinks
PULSE: for control over
processing
Leaking Overfilling Do not exceed the max fill line
on cup
Beverage has an odd
taste or texture
Machine not properly
cleaned after previous use
Thoroughly clean all parts before
the next use
The machine is making
a loud noise
Ingredients are too hard or
dense
Use softer ingredients or cut them
into smaller pieces
The machine is making
a loud noise
Blade is clogged or
obstructed
Turn off and ensure there’s no
obstruction
The machine is making
a loud noise
The motor is damaged or
malfunctioning
Contact customer support or a
technician to check the motor
Machine smells burnt Overheating due to overuse
or excessive blending
Allow the machine to cool down
for at least 30 minutes before
using again
Blades are not
turning properly
Ingredients are too hard or
packed/filled too tightly
Cut the ingredients into smaller
pieces and avoid overfilling
LED on Blend function
slowly flashing
Blades are not turning
properly/stuck
Remove cup, shake it several
times and install again
BEFORE FIRST USE, REVIEW ALL WARNING AND CAUTION STATEMENTS
IN THE IMPORTANT SAFEGUARDS SECTION.
ALWAYS MAKE SURE YOUR BLENDER IS CLEAN AND CHARGED
BEFORE USE.
DO NOT mix hot, warm, or carbonated liquids, as doing so may increase pressure
and pose a risk of burns or other injuries to the user.
DO NOT fill ingredients above the max fill line.
DO NOT run your portable blender when empty.
DO NOT put your hand inside the cup or near the blade when
the unit is running. The blade is very sharp. Handle with care.
DO NOT store the device outdoors
DO NOT let the motor base come into contact with any liquid.
DO NOT allow children to operate this appliance or use it as a toy. When using
any appliance, close supervision must be carried out, especially near children.
DO NOT attempt to sharpen the blades yourself.
DO NOT allow any part of the blender to come into contact with hot surfaces,
including stoves and other heating appliances.
DO NOT microwave any containers or accessories provided by the device.
DO NOT attempt to disrupt the interlocking mechanism. Ensure that the container
and cup lid are correctly installed before blending.
DO NOT expose containers and accessories to extreme temperatures.
They may be damaged.
DO NOT leave the device unattended during use. If unmixed ingredients are found
sticking to the side wall of the cup, please use the power button to turn off the device
and then use a scraper to remove them.
DO NOT attempt to remove the container and/or drinking cap from the motor base
while the blade is running. Before opening the lid or removing the container, please
make sure the device has stopped running completely.
DO NOT store ingredients for extended amounts of time before or after blending
them. Some foods may contain active ingredients or release gases that will expand if
left in a sealed container, resulting in excessive pressure buildup that can pose a risk
of injury.
DO NOT immerse the base into any liquid. Make sure the blender cup is fully dried
before storing the base inside.
WARNING: Discontinue use if the blade is bent or damaged.
WARNING: Modification, improper use, and failure to follow instructions can
increase the risk of serious personal injury, death, or property damage.
IMPORTANT WARNINGS
This product is not intended to be serviced or repaired by the user. No spare parts are available.
18 19
YOUR RECIPES
LIMITED WARRANTY
GreenPan Electrics are covered by
a limited warranty against defects in
materials and workmanship, beginning
on the date you receive the product and
lasting for two years. If your GreenPan
Electrics product has a defect covered by
the limited warranty during the warranty
period, The Cookware Company (USA),
LLC will, at its sole option, replace the
product or provide a refund. Further
information on the warranty claim process,
exclusions from warranty coverage, and
other terms can be found in the complete
limited warranty for this product, available
online at greenpan.us/warranty.
TERMS OF SALE;
ARBITRATION
The terms on which The Cookware
Company (USA), LLC sells GreenPan
Electrics are available online at greenpan.
us/pages/terms-of-sale (the “Terms”). The
Terms contain very important information
regarding your rights and obligations,
as well as conditions, limitations, and
exclusions that may apply to you. Please
read them carefully.
In particular, the Terms provide that,
by your purchase of this product, you
and The Cookware Company (USA),
LLC are agreeing to give up any rights
to litigate in a court or before a jury,
or to participate in a class action or
representative action with respect to
a claim. Other rights that you would
have if you went to court may also be
unavailable or limited in arbitration. Any
claim, dispute, or controversy between you
and The Cookware Company (USA), LLC
arising from or relating in any way to your
purchase of products or services will be
resolved exclusively and finally by binding
arbitration.
The arbitration will be administered by
the American Arbitration Association
(“AAA”) in accordance with the Consumer
Arbitration Rules (the “AAA Rules”) then
in effect, except as modified hereby. (The
AAA Rules are available at adr.org or
by calling the AAA at 1-800-778-7879.)
The Federal Arbitration Act will govern
the interpretation and enforcement of this
arbitration and waiver provision.
The Cookware Company (USA), LLC will
be responsible for the AAA filing fee of
any such proceeding. Other than your right
to pursue a claim in small claims court,
as described in the Terms, the arbitrator
will have exclusive authority to resolve
any dispute relating to arbitrability and/or
enforceability of this arbitration provision,
including any unconscionability challenge
or any other challenge that the arbitration
provision or these Terms are void, voidable
or otherwise invalid. The arbitrator will
be empowered to grant whatever relief
would be available in court under law or in
equity. Any award of the arbitrator(s) will
be final and binding on each of the parties
and may be entered as a judgment in any
court of competent jurisdiction. Attorney
fee shifting in this case is governed by the
Terms. You agree to an arbitration on an
individual basis. In any dispute, NEITHER
YOU NOR THE COOKWARE COMPANY
(USA), LLC WILL BE ENTITLED TO JOIN
OR CONSOLIDATE CLAIMS BY OR
AGAINST OTHER CUSTOMERS IN COURT
OR IN ARBITRATION OR OTHERWISE
PARTICIPATE IN ANY CLAIM AS A CLASS
REPRESENTATIVE, CLASS MEMBER OR
IN A PRIVATE ATTORNEY GENERAL
CAPACITY. The arbitral tribunal may
not consolidate more than one person’s
claims and may not otherwise preside
over any form of a representative or class
proceeding. The arbitral tribunal has no
power to consider the enforceability of this
class arbitration waiver and any challenge
to the class arbitration waiver may only be
raised in a court of competent jurisdiction.
If any provision of the arbitration agreement
described herein and in the Terms is
found unenforceable, the unenforceable
provision will be severed and the remaining
arbitration terms will be enforced.
HAVE QUESTIONS?
Just call us at 1-914-372-7777 or
email customercare.us@greenpan.com
WARRANTY
1400033677
