Manufacturer Address: 202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No.
20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen China
Manufacturer Name : Shenzhen Yunji Intelligent Technology CO., LTD
Android is a trademark of Google LLC.
The power delivered by the charger must be between
min 10 Watts required by the radio equipment, and
max 18 Watts in order to achieve the maximum
charging speed.
10-18W
USB PD
G7
G7
User Manual
www.oukitel.com
1
Receiver
light distance
sensor
Type-c
speaker grille
MIC
Touch screen
Front camera
10600
Battery
Warning
Accessories
G7 includes an internal battery.You can track your battery status with
the icon showed on the top right of the screen.
Use only
OUKITEL
-approved batteries specifically designed for you phone.
Incompatible batteries can cause serious iniuries or damage to your phone.
Never place batteries or phones on or in heating devices such as microwave
ovens , stoves , or radiators . Batteries may explode when overheated.
2
Huge Battery
mAh
Fast Charging
3
Rear
main camera
Fingerprint
Flash
SIM Card
Power key
Volume +
Volume -
4
How to insert the card
With the device facing up , insert the cardholder into the device in the
direction of the arrow.
To make sure your device is able to make calls , insert the SIM card in the
following order.
insert and press the ejector pin into the hole in the side to pop the
card tray.
2
SIM1
Card
SIM2
Card
SIM2 Card
5
How to boot
How to send SMS , MMS
SMS
MMs-video
Ianguage switching settings
SAR
Non-removable battery
Press the power button for 3-5 seconds to boot
Open the SMS app
Select New Information
Enter a phone number or browse your contacts
Select Edit Information and enter your text
Send
When writing a text message
Select images, videos, or other files you want to add
even you can take a new picture or video right away
Selecting or sending
Main menu-settings system--language and input method
Language and input method--language--language adding
Select the language you need, the system Will automatically
jump back to the language interface
Select the icon after the language bar and drag it to the first one
The maximum electromagnetic Specific Absorption Rate (SAR)
In line with the requirements of the national standard
EN62209-1:2016; EN 62209-2:2010; EN 62479:2010;
EN 50360:2017; EN 50566:2017;
6
Safety - In order to ensure safety during
use of the product , you must strictly
abide by the follow
The pad should be at least 15cm away from any medical
implant or rhythm adjuster and never put the device in your
coat pocket.
Do not expose the device and other batteries together with
high temperatures or heat-generating equipment such as
sunlight , heaters , microwave ovens , ovens , or water heaters.
Overheating of the battery can cause an explosion
When charging is complete or not charging , disconnect the
charger from the device and unplug the charger from the
outlet.
If the device is equipped with a non-removable battery , do not
replace the battery by yourself to avoid damaging the battery
or the device.
Use of an unapproved or incompatible power source,
charger, or battery may cause fire, explosion, or other
hazards.
Do not disassemble or reset the battery, insert other objects,
immerse in water or other liquids to avoid battery leakage,
overheating, fire or explosion.
Do not drop, crush, scratch, or puncture the battery to avoid
subjecting the battery to excessive external pressure, Which
may result in internal short-circuit and overheating of the
battery.
The company does not bear responsibility for accidents caused
by non-standard related charging equipment.
If you want to read the full CE compliance, please check this
7
Thoroughly understand the maintenance of this device to use
the device more safely and effectively, and extend the service
life of the device as much as possible.
Please follow the instructions in the manual to open the
device, disassemble the accessories, and do not try other
Please avoid dropping, knocking, or shaking your device.
Rough handling of the device can cause the screen to rupture,
damaging the internal circuit board and the delicate structure.
Do not use chemical solvents or detergents to clean your
device. Wipe the device case with a soft cotton cloth dampened
with water and mild soap.
Clean the lens with a clean, dry, soft cloth. ( Example
camera lens) and display.
When the charger is not in use, please unplug it from the
power outlet. Do not connect the battery that has been fully
charged to the charger for a long time, as overcharging will
shorten the battery life.
Maintenance
8
1.Use careful with the earphone maybe possible
excessive sound pressure from earphones and
headphones can cause hearing loss.
2. CAUTION: RISK OF EXPLOSION IF BATTERY
IS REPLACED BYAN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDINGTO
THE INSTRUCTIONS .
3. The product shall only be connected to a USB interface of version USB2.0 .
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. Operation temperature: -20°C to 55°C.
6. The plug considered as disconnect device of adapter.
7. SAR: The device complies with RF specifications when the device used at 5mm
requirements.
Restrictions in the 5 GHz band:
radio equipment will be subject to some restrictions when placed on the market in
Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany
(DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR),
Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary
(HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT),
Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE), the Turkey
(TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use only when operating in
the 5150 to 5250 MHz
English
ES LU RO CZ FR HU SI
DK HR BE BG DE EE IE
EL IT
Cy
LV LT SK MT
NL AT PL PT FI SE LI
TR NO CH IS
9
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This Product meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons regardless
of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA
(2ANMU-G7) has been tested against this SAR limit. SAR
information on this can be viewed
ID number for search. This device was tested for typical operations
10mm from the body. To maintain compliance with FCC RF exposure
requirements, 10mm separation distance should. maintained to the
user's bodies.
10
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radiofrequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following.
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
