Dual Function AFCI/GFCI Circuit Breaker
Brochure
www.usa.siemens.com/dualfunction
QFGA2
MP-GAT2
2
Dual Function
Circuit Breaker
Two state-of-the-art
te ch n o l o g i e s p a ck a ge d
in one small device.
The Dual Function Circuit Breaker combines
Class A 5mA GFCI and Combination Type
AFCI, protecting against both Arc Faults and
Ground Faults. This, along with the new Self
Test feature, makes it the first in class in
electrical safety for homeowners.
The 2014 National Electrical Code (NEC®)
now requires both Arc Fault and Ground Fault
protection on kitchen and laundry circuits.
Before the release of Dual Function Circuit
Breakers, the only option to comply with this
code was to pair an AFCI circuit breaker with a
GFCI receptacle. The Dual Function Circuit
breaker combines these two devices into one
solution that provides both cost savings and
less hassle in installation and maintenance.
This is a win solution for everyone.
A device that tests itself.
Testing GFCIs and AFCIs on a monthly basis is
a good idea that is sometimes forgotten.
Underwriters Laboratories (UL) suggests that
AFCI/GFCI devices be tested every 30 days
after installation to ensure they are properly
working. Now the new Self Test feature
enables the Dual Function Circuit Breaker to
automatically and continuously test itself to
ensure that it is working properly. If it is
detected that the device has been
compromised, the breaker will trip and lights
on the breaker will blink. This effortless
system guarantees that only the best
protection is given to your home at all times.
Benefits
• Fast installation – easier to install one device than two
• Cost savings – lower cost than purchasing both a GFCI and AFCI
• Smaller device – combines two state-of-the art technologies into one small device
• Self Test feature
- Autonomously and continuously tests itself for device malfunction
- Trips and lights will blink when protection has been compromised
*National Electrical Code (NEC®) is a registered trademark of NFPA.
3
Features
• Plug-in or bolt-on branch circuit breakers for Siemens load
centers and panelboards
• Self Test feature as required by UL 943 effective June 2015
• Saving time – ease of installation – only One product to
install vs. Two
• Saving money – Two safety devices combined into One.
• LED trip indicator – a Siemens exclusive!
• Available with interrupting rating of 10kA, 22kA or 65kA
• UL Listed CCN: DIYG
• Ratings:
- HACR
- SWD
- 120 Volts AC
• Wire range:
- #14 – #8 AWG Cu
- #12 – #8 AWG Al
• Torque: 25 lb. in.
• Padlocking device available, use catalog number ECPLD1
• Both lugs at the same angle - for easier wiring
Catalog Number
Amperage
Rating
Interrupting
Rating UL Type
Siemens and Murray Bolt-On
B115DF 15 10kAIC
BFGA2
B120DF 20 10kAIC
B115DFH 15 22kAIC
BFGAH2
B120DFH 20 22kAIC
B115DFHH 15 65kAIC
HBFGA2
B120DFHH 20 65kAIC
Siemens Plug-In
Q115DF 15 10kAIC
QFGA2
Q120DF 20 10kAIC
Q115DFH 15 22kAIC
QFGAH2
Q120DFH 20 22kAIC
Q115DFHH 15 65kAIC
HQFGA2
Q120DFHH 20 65kAIC
Murray Plug-In
MP115DF 15 10kAIC
MP-GAT2
MP120DF 20 10kAIC
MP115DFH 15 22kAIC
MP-HGAT2
MP120DFH 20 22kAIC
MP115DFM 15 65kAIC
MP-MGAT2
MP120DFM 20 65kAIC
Subject to changes and errors. The information given in this
document only contains general descriptions and/or
performance features which may not always specifically
reflect those described, or which may undergo modification
in the course of further development of the products. The
requested performance features are binding only when they
are expressly agreed upon in the concluded contract.
Siemens Industry, Inc.
5400 Triangle Parkway
Norcross, GA 30092
1-800-241-4453
Order No. RPBR-DUALF-1116 | Printed in USA |
All rights reserved.
© 2016, Siemens Industry, Inc.
www.usa.siemens.com/dualfunction
