Mode
Previous
Next
EQ
Stop
The format is not supported
Ran out of power
Recharge the player
please make sure the format of your
disc is CD, CDR, MP3, HDCD.
There are two ways to turn on the player:
1. There is a power switch located in the side of the player. Slide it to ON position to turn on the player.
2. When the power switch is on, press PLAY button once to turn on the player.
NOTE 1: When a disc is played to the end and there is no activity after 20 seconds, the player will enter a
standby mode. Please press the PLAY button to restart the player.
NOTE 2: The power switch has a button lock function which is designed to lock the operations of all buttons.
A HOLD word will be displayed on the screen if you slide the power switch to the HOLD position when the player
is on.
There are two ways to turn off the player:
1. Press STOP button twice to turn off the player.
2. Slide the power switch to OFF position to turn off the player.
NOTE: Please turn the power switch to OFF position if the player no longer be used for a long time.
How to choose the power adapter: The package comes with a USB charging cable. You can use any adapter
that supports USB2.0 or standard USB charger of a cellphone to charge the player.
Charging time: It will take about 4 hours to fully charge the player. When charging, the led indicator on the side
of the payer will light up in RED, the indicator will turn GREEN when fully charged.
NOTE: When there is low batter symbol showing on the screen, it means that you need to charge the player.
How to set the play mode
Each time the MODE button is pressed, the screen will show as following:
REP1 (Repeat one track), ALL ( Repeat all tracks), SHUF ( Play tracks in a random order), INTRO( Play the first
10 seconds of each track)
NOTE: When there is no the above mode showing in the screen, the player will play all tracks in order.
How to program your disc
There is a PROG button on the surface, this is designed to reorder the tracks as you want. You can reorder the
songs you like and let them play in order. (Eg: if there is 100 songs in a disc, you can arrange your favorite
songs in 1,2,3,4...order, so that you can listen to your favorite songs directly.
Please follow the below steps to PROG your songs:
1. Press the STOP button once.
2. Then press the PROG button to enter programming mode, "PGM"will show up on the screen.
3. Then Press the PREVIOUS or NEXT button to choose the song you like to play in order, then press the
PROG button again to confirm. ( you can choose up to 30 songs)
4. At last, Press the PLAY button and it will play the songs you just chose in order.
NOTE: You can cancel the programming mode by press the STOP button once.
How to adjust sound
The VOLUME button is located on the side of
the player. Rotating it to left or right to increase
or decrease the volume.
Press the EQ button on the player to
choose different sound effects.
5 sound effects are included: BBS, POP,
JAZZ, ROCK, CLASSIC.
How to set EQ mode
Screen auto turn off
Button Lock Function
After the playback mode and the sound effects
have been setup, you can slide the power switch
to HOLD position to prevent naughty kids or
crowded occasions from affecting the setting of
the player.
Resume Function
Long press the PROG button will turn on or turn off the
memory function. The ON or OFF word will show up on the
screen at this time.
ON: The player will return to the last stop-track of the disc.
OFF: The player will not return to the last stop-track of the
disc.
NOTE: The resume function is on by default when you
received the player.
Mode
Previous
Next
EQ
Stop
