HPP-A11S-WB-2P Amazon Basics Smart Plug with Timer User Manual

B0CL9C4PYT, B0CL9CG87N, B0CL9D9HM4

User Manual

Single Outlet Indoor Smart Plug, Works with Alexa only, White 1pack/2pack/4pack

Manuel de l’utilisateur

Prise intelligente d’intérieur à prise unique, fonctionne avec Alexa uniquement, blanche, paquet de 1/ paquet

de 2/paquet de 4

Manual del usuario

Tomacorriente inteligente de interior de una toma, solo funciona con Alexa, paquete de 1/paquete de 2/

paquete de 4, Blanco

.........................Page 2

.........................Page 8

..................... Página 14

Final size: 8.27 × 11.69 in. (210 × 297 mm)

Safety Instructions......................................................................................................................................................................................................................................................................3

Package Contents .......................................................................................................................................................................................................................................................................3

Compatibility .................................................................................................................................................................................................................................................................................. 3

Parts Overview ...................................................................................................................................................... .......................................................................................................................4

Set Up the Smart Plug .............................................................................................................................................................................................................................................. ..................4

Alternative Setup Methods .....................................................................................................................................................................................................................................................4

Using the Smart Plug..................................................................................................................................................................................................................................................................5

Troubleshooting ...........................................................................................................................................................................................................................................................................6

My smart plug won’t connect to Alexa. ........................................................................................................................................................................................................................6

My connected device won’t turn on/o with the Alexa app. ................................................................................................................................................................................6

I can’t change my smart plug seings. ........................................................................................................................................................................................................................6

If I lose the Quick Setup Guide or no barcode is available, how can I set up my smart plug? ........................................................................... .....................................6

Error code (-1 :-1 :-1 :-1) displays on the screen. ........................................................................... ........................................................................... ..................................................... 6

Specications ...................................................................................................................................................... ..........................................................................................................................6

Trademarks ...................................................................................................................................................... .............................................................................................................................. 7

FCC – Supplier’s Declaration of Conformity ......................................................................................................................................................................................................................7

FCC Compliance Statement .................................................................................................................................................................................................................................................... 7

FCC Interference Statement .................................................................................................................................................................................................................................................. 7

Canada IC Notice .......................................................................................................................................................................................................................................................................... 7

Feedback and Help ...................................................................................................................................................................................................................................................................... 7

Contents

Safety Instructions

Read these instructions carefully and retain them for future use. If this smart plug is passed to a third party, then these instructions must

be included.

When using smart plugs, basic safety precautions should always be followed to reduce the risk of re, electric shock, and/or injury to

persons including the following:

WARNING

» The total current limit of the device is 15 amps. To avoid damage, do not exceed the 15-amp limit. If a direct short is created on the output, the

smart plug will be damaged and no longer function.

» Do not disassemble the product or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need

service, please contact customer service.

» Make sure to use this product together with a 15A circuit breaker or fuse in the upstream circuit.

» The applicable requirements must be observed during installation. Failure to observe the requirements may result in damage to property and/

or injury, or even danger of death.

» Observe the technical data, in particular the maximum permissible switching power of the relay and the type of product to be connected,

before connecting a product. All load information relates to ohmic loads. The device should only be loaded to the specied power limit.

Overloading may result in destruction of the device, re, or an electrical accident. Among other things, reliable switching o of the connected

product cannot be guaranteed.

» Devices with electronic power supplies (for example, televisions or high voltage LED lights) do not constitute an ohmic load. They may generate

start-up currents of more than 100A. Switching such products results in premature wear on the integrated relay. As a result, it is possible that

the connected product may not reliably switch o.

» Do not connect devices which can cause res or other damage if switched on unsupervised (for example, irons).

» Always unplug the device from the smart plug before making changes to the device.

» Always lay the cables of connected devices in such a way that they cannot pose a hazard to people or pets.

» The standards and directives applicable in your country must be observed during planning, setup, operation, and maintenance.

» Do not use the smart plug with power strips or with extension cables.

» Do not use the smart plug for disconnection. The load is not electrically isolated from the mains.

» Do not plug smart plugs into one another.

» The smart plug is only de-energized when it is removed from the socket.

Intended Use

» For indoor use only.

» Do not use in wet locations.

Package Contents

» B0CL9C4PYT: Smart plug (x1)

B0CL9CG87N:

Smart plugs (x2)

B0CL9D9HM4: Smart plugs (x4)

» Safety Manual

» Quick Setup Guide

Compatibility

» 2.4GHz Wi-Fi network

» North American (Type-B) grounded outlet

» Connected device with 15A (Resistive Load) max output

» iOS/Android/Fire OS device with the Alexa app

Parts Overview

Set Up the Smart Plug

You can set up the smart plug with the QR code on the back of your printed Quick Setup Guide (recommended) or on the back of the product. You

can also set it up without a QR code.

Set Up with the Quick Setup Guide QR Code (Recommended)

1. Download the latest version of the Alexa app from the app store, then log in.

2. Plug in the Amazon Basics smart plug.

3. In the Alexa app, tap

(More) from the boom menu, then tap Add Device.

4. Tap Plug, then tap Amazon Basics.

5. Follow the steps in the Alexa app to complete setup. When prompted, scan the QR code on the back of your printed Quick Setup Guide. If you

have more than one smart plug and are scanning the QR code in your Quick Setup Guide, match the DSN number on the smart plug with the QR

code.

NOTICE

Do not scan the barcode on packaging. If the barcode scan fails, refer to “Alternative Setup Methods” on page 4.

Scan QR code below or on smart plug for Alexa setup.

Numériser le code QR ci-dessous ou sur la prise

intelligente pour la con guration d'Alexa.

Escanea el código QR que aparece a continuación o en el

enchufe inteligente para con gurar Alexa.

DSN:

XXXXXXXXXXXX

Alternative Setup Methods

Option 1: Set Up with the QR Code on the Back of the Product

1. Download the latest version of Alexa app from the app store, and log in.

2. Plug in the Amazon Basics smart plug.

3. In the Alexa app, tap

(More) from the boom menu, then tap Add Device.

4. Tap Plug, then tap Amazon Basics.

5. Follow the steps in the Alexa app to complete setup. When prompted, scan the QR code on the back of the product.

QR code

(on the back of the

product)

Type-B outlet LED indicator

Power/Reset buon

QR code on back of

Quick Setup Guide

QR code

(on the back of the product)

NOTICE

Do not scan the barcode on packaging. If the barcode scan fails or you lose the Quick Setup Guide, refer to “Option 2: Set Up

without the Barcode” on page 5.

Option 2: Set Up without the Barcode

Use these instructions if the QR code setup does not work.

1. Plug in the Amazon Basics smart plug.

2. In the Alexa app, tap

(More) from the boom menu, then tap Add Device.

3. Tap Plug, then tap Amazon Basics.

4. When prompted to scan the barcode, tap DON’T HAVE A BARCODE?

5. Tap NEXT, then follow the on-screen instructions to complete setup.

Understanding the LED

Indicator Description

LED lights red for 1 minute Smart Plug is unregistered

LED blinks red quickly for 1 minute Smart Plug is disconnected

LED lights green for 3 seconds Smart Plug is connected

LED blinks red and green alternately Smart plug is reset to factory defaults

LED blinks green rapidly for 5 minutes Smart Plug is ready for setup

LED is o Smart Plug is o

Using the Smart Plug

» Press the power/reset buon to turn the smart plug (and connected device) on or o.

» Use the Alexa app to turn the smart plug on/o remotely, set schedules, and more.

» Use the voice control on your Amazon Alexa. For example, you can say, “Alexa, turn on First Plug.”

Reset to Factory Defaults

Press and hold the power/reset buon for 10 seconds until the indicator blinks red and green alternately.

Troubleshooting

If the smart plug is not functioning properly, try the following solutions.

Problem Solutions

My smart plug won’t connect to

Alexa.

» Make sure that your phone/tablet and the Alexa app are updated to the latest soware version.

» Move your phone/tablet closer to your smart plug.

» Make sure that your phone/tablet and smart plug are connected to the same 2.4GHz Wi-Fi network.

The smart plug is not compatible with 5GHz networks.

» If you have a dual Wi-Fi router and both network signals have the same name, rename one and try

reconnecting to the 2.4GHz network.

» Make sure that you scan the correct QR code provided in your Quick Setup Guide or on the smart plug.

If you have more than one smart plug and are scanning the QR code in your Quick Setup Guide, match

the DSN number on the smart plug to the QR code.

» Factory reset your smart plug. See “Reset to Factory Defaults” on page 5.

My connected device won’t turn on/

o with the Alexa app.

» Make sure that the device connected to the smart plug is turned on. For example, if you connected a

lamp, turn the lamp’s power switch to the “on” position.

» Make sure that your phone/tablet and smart plug are connected to the same Wi-Fi network.

» Reset your smart plug to factory defaults, then set up the smart plug with Alexa again. See “Set Up

the Smart Plug” on page 4.

I can’t change my smart plug

seings.

» Reset your smart plug to factory defaults, then set up the smart plug with Alexa again. See “Set Up

the Smart Plug” on page 4.

If I lose the Quick Setup Guide or no

barcode is available, how can I set up

my smart plug?

» You can set up your device via two alternative setup methods. The instructions can be found in

“Alternative Setup Methods” on page 4.

Error code (-1 :-1 :-1 :-1) displays on the

screen.

» Make sure your phone has Bluetooth turned on throughout the entire setup process and the device

you are trying to setup is in pairing mode. Restart your device by powering it o and on, and then set

up again.

Specications

Supply Voltage 120V AC, 60Hz

Max. Current 15A

Max. Power Consumption 1,800W (Resistive Load)

Electric Quantity Detection Not supported

Ambient Temperature -22° to 104°F (-30° to 40°C)

Storage Temperature -4° to 140°F (-20° to 60°C)

Operating Humidity 10% to 90% RH non-condensing

Wi-Fi 2.4GHz network, 802.11 b/g/n

Wireless Protocol Wi-Fi + Bluetooth (Bluetooth only does pairing)

Protection Class IP20

Authentication cETLus/FCC ID IC

Trademarks

The Wi-Fi CERTIFIED™ Logo is a registered trademark of Wi-Fi Alliance®.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.and any use of such

marks by Amazon.com Services LLC is under license. Other trademarks and trade names are those of their

respective owners.

FCC – Supplier’s Declaration of Conformity

Unique Identier

B0CL9C4PYT–Amazon Basics Single Outlet Indoor Smart Plug, Works with Alexa only, White 1 pack

B0CL9CG87N–Amazon Basics Single Outlet Indoor Smart Plug, Works with Alexa only, White 2 pack

B0CL9D9HM4–Amazon Basics Single Outlet Indoor Smart Plug, Works with Alexa only, White 4

pack

Responsible Party Amazon.com Services LLC.

U.S. Contact Information 410 Terry Ave N. Seale, WA 98109, United States

Telephone Number (206) 266-1000

FCC Compliance Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the

user is encouraged to try to correct the interference by one or more, of the following measures:

» Reorient or relocate the receiving antenna.

» Increase the separation between the equipment and the receiver.

» Connect the equipment into an outlet on a circuit dierent to which the receiver is connected.

» Consult the dealer or an experienced radio/TV technician for help.

RF Warning Statement: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for

this transmier must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmier.

Canada IC Notice

» This device contains license-exempt transmier(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada’s

License-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

» This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

» This Class B digital apparatus complies with Canadian CAN ICES (B) / NMB (B) standard.

» This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmier must not be

co-located or operating in conjunction with any other antenna or transmier. This equipment should be installed and operated with a minimum

distance of 8 in. (20 cm) between the radiator and any part of your body.

Feedback and Help

We would love to hear your feedback. Please consider leaving a rating and review through your purchase orders. If you need help with your product,

Consignes de sécurité ...............................................................................................................................................................................................................................................................9

Contenu de l'emballage .............................................................................................................................................................................................................................................................9

Compatibilité .................................................................................................................................................................................................................................................................................9

Aperçu des pièces ....................................................................................................................................................................................................................................................................10

Installation de la prise intelligente ......................................................................................................................................................................................................................................10

Méthodes alternatives de conguration .........................................................................................................................................................................................................................10

Utilisation de la prise intelligente ...................................................................................................................................................... ...................................................................................11

Problèmes et solutions ........................................................................................................................................................................................................................................................... 12

La prise intelligente ne se connecte pas à Alexa. ...................................................................................................................................................................................................12

Mon appareil connecté ne se met pas en marche ni s’arrête avec l’application Alexa. ......................................................................................................................... 12

Je ne peux pas modier les paramètres de ma prise intelligente. ...................................................................................................................................................... ..........12

Si le guide d’installation rapide est égaré ou si aucun code-barres n’est disponible, comment congurer la prise intelligente? ....................................12

Code d’erreur (-1 :-1 :-1 :-1) s’ache sur l’écran. ........................................................................... ........................................................................... ...................................................12

Spécications ...................................................................................................................................................... ........................................................................................................................ 12

Marques commerciales .......................................................................................................................................................................................................................................................... 12

Déclaration de conformité FCC du fournisseur ....................................................................................................................................................... ..................................................... 13

Déclaration de conformité FCC ............................................................................................................................................................................................................................................ 13

Déclaration FCC sur les interférences ....................................................................................................................................................... ....................................................................... 13

Déclaration d’Industrie Canada ...................................................................................................................................................... ..................................................................................... 13

Vos avis et aide ............................................................................................................................................................................................................................................................................ 13

Table des matières

Consignes de sécurité

Lire ces instructions avec soin et les conserver pour toute référence ultérieure. Si cee prise intelligente est fournie à une partie tierce,

ces instructions doivent être incluses.

Lors de l’utilisation de prises intelligentes, des précautions élémentaires doivent toujours être observées pour réduire le risque

d’incendie, de choc électrique et de blessures pour les personnes, notamment:

AVERTISSEMENT

» La limite de courant totale de l'appareil est de 15 ampères. Pour éviter tout dommage, ne pas dépasser les limites de 15 A. Si un court-circuit

direct est créé sur la sortie, la prise intelligente sera endommagée et ne fonctionnera plus.

» Ne pas démonter le produit ni faire soi-même des réparations. Un risque de choc électrique peut se produire ainsi que l'annulation de la

garantie limitée. Communiquer avec le service clientèle pour toute assistance.

» Veiller à utiliser ce produit avec un disjoncteur ou un fusible de 15A dans le circuit en amont.

» Les exigences applicables doivent être observées pendant l'installation. Le non-respect des exigences peut entraîner des dommages

matériels ou des blessures, voire un danger de mort.

» Observer les données techniques, en particulier la puissance de commutation maximale autorisée du relais et le type de produit à connecter,

avant de connecter un produit. Toutes les informations relatives à la charge se rapportent à des charges ohmiques. L'appareil ne doit être

chargé que jusqu'à la limite de puissance spéciée. Une surcharge peut entraîner la destruction de l’appareil, un incendie ou un accident

électrique. Entre autres, il n'est pas possible de garantir une mise hors tension able du produit connecté.

» Les appareils dotés d'une alimentation électronique (par exemple, les téléviseurs ou les lampes à DEL à haute tension) ne constituent pas

une charge ohmique. Ils peuvent générer des courants de démarrage de plus de 100A. La commutation de tels produits entraîne une usure

prématurée du relais intégré. Par conséquent, il est possible que le produit connecté ne s'éteigne pas de manière able.

» Ne pas connecter d'appareils susceptibles de provoquer des incendies ou d'autres dommages s'ils sont allumés sans surveillance (par

exemple, des fers à repasser).

» Débrancher l’appareil de la prise intelligente avant d'eectuer toutes modications sur l'appareil.

» Toujours poser les câbles des appareils connectés de manière à ce qu'ils ne constituent pas un danger pour les personnes ou les animaux

domestiques.

» Les normes et directives en vigueur dans le pays doivent être respectées lors de la planication, de l'installation, du fonctionnement et de

l'entretien.

» Ne pas utiliser la prise intelligente avec une barre multiprises ou des câbles de rallonge.

» Ne pas utiliser la prise intelligente pour la déconnexion. La charge n'est pas isolée électriquement des prises principales.

» Ne pas brancher la prise intelligente dans une autre.

» La prise intelligente n'est mise hors tension que lorsqu'elle retirée de la prise secteur.

Utilisation prévue

» Pour utilisation à l’intérieur uniquement.

» Ne pas l'utiliser dans des endroits mouillés.

Contenu de l'emballage

» B0CL9C4PYT: Prise intelligente (1)

B0CL9CG87N:

Prises intelligentes (2)

B0CL9D9HM4: Prises intelligentes (4)

» Manuel de sécurité

» Guide d’installation rapide

Compatibilité

» Réseau Wi-Fi de 2,4 GHz

» Une prise secteur mise à la terre de type Amérique du Nord (Type B)

» Des appareils connectés avec une sortie maximale de 15A (charge résistive)

» Des appareils iOS/Android/Fire OS avec l'application Alexa

Aperçu des pièces

Installation de la prise intelligente

La prise intelligente peut être congurée avec le code QR à l’arrière du Guide d’installation rapide imprimé (recommandé) ou au dos du produit. Il est

aussi possible d'eectuer le réglage sans un code QR.

Conguration avec le code QR du Guide d'installation rapide (Recommandé)

1. Télécharger la dernière version de l’application Alexa dans la boutique App Store et se connecter.

2. Brancher la prise intelligente d'Amazon Basics.

3. Dans l’application Alexa, appuyez sur

(Plus) dans le menu du bas, puis appuyez sur Ajouter un appareil.

4. Toucher Plug (Prise), puis toucher Amazon Basics.

5. Suivre les étapes dans l'application Alexa an de terminer la conguration. Quand il est demandé, balayer le code QR à l’arrière du Guide

d'installation rapide imprimé. Dans le cas où il y a plus d'une prise intelligente et que le code QR dans le Guide d'installation rapide est numérisé,

faire correspondre le numéro DSN de la prise intelligente avec le code QR.

REMARQUE

Ne pas balayer le code-barres sur l'emballage. Si le balayage du code-barres ne fonctionne pas, se référer à «Méthodes

alternatives de conguration» on page 10.

Scan QR code below or on smart plug for Alexa setup.

Numériser le code QR ci-dessous ou sur la prise

intelligente pour la con guration d'Alexa.

Escanea el código QR que aparece a continuación o en el

enchufe inteligente para con gurar Alexa.

DSN:

XXXXXXXXXXXX

Méthodes alternatives de conguration

Option 1: Conguration avec le code QR au dos du produit

1. Télécharger la dernière version de l’application Alexa dans la boutique App Store et se connecter.

2. Brancher la prise intelligente d'Amazon Basics.

3. Dans l’application Alexa, appuyez sur

(Plus) dans le menu du bas, puis appuyez sur Ajouter un appareil.

4. Toucher Plug (Prise), puis toucher Amazon Basics.

5. Suivre les étapes dans l'application Alexa an de terminer la conguration. Quand demandé, balayer le code QR au dos du produit.

Code QR

(à l’arrière

du produit)

Prise de type B Témoin DEL

Bouton de marche-

arrêt ou de

réinitialisation

Code QR au dos du Guide d’installation

rapide

Code QR

(à l’arrière du produit)

REMARQUE

Ne pas balayer le code-barres sur l'emballage. Si le balayage du code à barres ne fonctionne pas ou si le Guide d'installation

rapide est égaré, se référer à «Option 2: Conguration sans le code-barres» on page 11.

Option 2: Conguration sans le code-barres

Utiliser ces instructions si la conguration avec le code QR ne fonctionne pas.

1. Brancher la prise intelligente d'Amazon Basics.

2. Dans l’application Alexa, appuyez sur

(Plus) dans le menu du bas, puis appuyez sur Ajouter un appareil.

3. Toucher Plug (Prise), puis toucher Amazon Basics.

4. Quand il est demandé de balayer le code-barres, toucher DON'T HAVE A BARCODE?

(Vous n'avez pas de code-barres?).

5. Toucher NEXT (Suivant) puis suivre les instructions à l'écran an de procéder à la conguration.

Signication de la DEL

Témoin Description

La DEL s'allume en rouge pendant 1 minute La prise intelligente n'est pas enregistrée

La DEL clignote en rouge rapidement pendant 1 minute La prise intelligente est déconnectée

La DEL s'allume en vert pendant 3 secondes La prise intelligente est connectée

La DEL clignote alternativement en rouge et en vert La prise intelligente est réinitialisée aux paramètres d'usine

La DEL clignote en vert rapidement pendant

5 minutes

La prise intelligente est prête pour la conguration.

La DEL est éteinte La prise intelligente est hors tension

Utilisation de la prise intelligente

» Appuyer sur le bouton marche-arrêt ou réinitialisation pour activer ou désactiver la prise intelligente (et l'appareil connecté).

» Utiliser l'application Alexa pour mere la prise intelligente sous ou hors tension, planier des programmes, entre autres.

» Utiliser le contrôle vocal sur Alexa d'Amazon. Par exemple, il est possible de dire «Alexa met la première prise en marche».

Réinitialisation aux paramètres d'usine

Appuyer sur le bouton de marche-arrêt ou réinitialisation pendant 10 secondes jusqu'à ce que le témoin d'état clignote alternativement en rouge et

en vert.

Problèmes et solutions

Si la prise intelligente ne fonctionne pas correctement, essayer les solutions suivantes.

Problème Solutions

La prise intelligente ne se connecte

pas à Alexa.

» Vérier que le téléphone ou la tablee et l’application Alexa disposent de la dernière version du

logiciel.

» Déplacer le téléphone ou la tablee à proximité de la prise intelligente.

» Vérier que le téléphone ou la tablee et la prise intelligente sont connectés sur le même réseau Wi-Fi

de 2,4 GHz. Cee prise intelligente n’est pas compatible avec les réseaux de 5GHz.

» En cas d’utilisation d’un routeur Wi-Fi bibande et les deux signaux ont le même nom, en renommer un

et essayer une reconnexion à la fréquence de réseau de 2,4 GHz.

» S’assurer de numériser le bon code QR fourni dans le Guide d’installation rapide ou sur la prise

intelligente. Dans le cas où il y a plus d’une prise intelligente et que le code QR dans le Guide

d’installation rapide est numérisé, faire correspondre le numéro DSN de la prise intelligente avec le

code QR.

» Réinitialiser la prise intelligente. Voir «Réinitialisation aux paramètres d’usine» on page 11.

Mon appareil connecté ne se met

pas en marche ni s’arrête avec

l’application Alexa.

» Vérier que l’appareil connecté à la prise intelligente est sous tension. Par exemple, si une lampe est

connectée, mere l’interrupteur de la lampe sur la position «marche».

» Vérier que le téléphone ou la tablee et la prise intelligente sont connectés sur le même réseau

Wi-Fi.

» Réinitialiser la prise intelligente aux paramètres d’usine, puis réinstaller la prise intelligente avec

Alexa. Voir «Installation de la prise intelligente» on page 10.

Je ne peux pas modier les

paramètres de ma prise intelligente.

» Réinitialiser la prise intelligente aux paramètres d’usine, puis réinstaller la prise intelligente avec

Alexa. Voir «Installation de la prise intelligente» on page 10.

Si le guide d’installation rapide est

égaré ou si aucun code-barres n’est

disponible, comment congurer la

prise intelligente?

» Il est possible de congurer l’appareil en utilisant deux méthodes alternatives. Les instructions peuvent

être trouvées sur «Méthodes alternatives de conguration» on page 10.

Code d’erreur (-1 :-1 :-1 :-1) s’ache

sur l’écran.

» S’assurer que Bluetooth est activé sur le téléphone tout au long du processus de congu-ration et

que l’appareil en train d’être conguré est en mode de couplage. Redémarrer l’appareil et le meant

sous et hors tension, et essayer de nouveau de le congurer.

Spécications

Tension d’alimentation 120 V c.a., 60 Hz

Courant max. 15A

Consommation d’électricité max. 1800W (charge résistive)

Détection de la quantité d'électricité Non pris en charge

Température ambiante -30° à 40°C (-22 à 104°F)

Température de stockage -20° à 60°C (-4 à 140°F)

Humidité de service 10% à 90 % d’humidité relative (sans condensation)

Wi-Fi Réseau de 2,4 GHz, 802.11b/g/n

Protocole sans l Wi-Fi et Bluetooth (Bluetooth ne fait que le jumelage)

Catégorie de protection IP20

Authentication cETLus/FCC ID IC

Marques commerciales

Le logo Wi-Fi CERTIFIED

est une marque déposée de Wi-Fi Alliance

La marque verbale et les logos Bluetooth

sont des marques déposées appartenant à Bluetooth SIG, Inc. et

l’utilisation de ces marques par Amazon.com Services LLC fait l'objet d'une licence. Les autres marques et noms

commerciaux appartiennent à leurs propriétaires respectifs.

Déclaration de conformité FCC du fournisseur

Identiant unique

B0CL9C4PYT – Prise intelligente d’intérieur à prise unique d'Amazon Basics, fonctionne

avec Alexa uniquement, blanche, paquet de 1

B0CL9CG87N – Prise intelligente d’intérieur à prise unique d'Amazon Basics, fonctionne

avec Alexa uniquement, blanche, paquet de 2

B0CL9D9HM4 – Prise intelligente d’intérieur à prise unique d'Amazon Basics, fonctionne

avec Alexa uniquement, blanche, paquet de 4

Partie responsable Amazon.com Services LLC.

Coordonnées du contact aux É.-U. 410 Terry Ave N. Seale, WA 98109, États-Unis

Numéro de téléphone (206) 266-1000

Déclaration de conformité FCC

1. Cet appareil est conforme à l’article 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes:

(1) Ce périphérique ne doit pas émere d’interférences préjudiciables, et

(2) Ce périphérique doit accepter toutes les interférences reçues, y compris celles pouvant provoquer un fonctionnement préjudiciable.

2. Tous changements ou modications qui ne seraient pas expressément approuvés par les responsables des normes pourraient rendre nul le

droit de l’utilisateur d’utiliser cet équipement.

Déclaration FCC sur les interférences

Cet équipement a été testé et déclaré conforme aux limitations prévues dans le cadre de la catégorie B des appareils numériques, dénies par

l’article 15 du règlement de la FCC. Ces limites ont pour but d’assurer une protection raisonnable contre les interférences préjudiciables dans une

installation résidentielle.

Cet équipement génère, utilise et diuse des ondes radio et, s’il n’est pas installé et utilisé conformément aux instructions dont il fait l’objet, il peut

provoquer des interférences préjudiciables aux communications radio. Cependant, il n'est pas possible de garantir qu’aucune interférence ne se

produira pour une installation particulière. Si cet équipement produit des interférences préjudiciables lors de réceptions radio ou télévisées, qui

peuvent être détectées en éteignant puis en rallumant l’appareil, essayer de corriger l’interférence au moyen de l’une ou de plusieurs des mesures

suivantes:

» réorienter ou déplacer l’antenne réceptrice;

» augmenter l'écartement de l’équipement par rapport au récepteur;

» brancher l’équipement sur une prise d’un circuit diérent de celui sur lequel le récepteur est branché;

» contacter le revendeur ou un technicien radio ou télévision qualié pour toute assistance.

Avertissement relatif aux radiofréquences: Cet équipement doit être installé et opéré selon des instructions fournies et les antennes utilisées pour

cet émeeur doivent être installées pour fournir une distance de séparation d'au moins 20 cm de toutes personnes et ne doit pas être colocalisé ni

fonctionner conjointement avec une autre antenne ou émeeur.

Déclaration d’Industrie Canada

» L’émeeur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromere le fonctionnement.

» Cet équipement est conforme aux limitations prévues par Industrie Canada pour l’exposition aux irradiations dans le cadre d’un

environnement d’accès libre.

» Cet appareil numérique de classe B est conforme à la norme ICES B/NMB (B) du Canada.

» Cet équipement est conforme aux limitations prévues par IC CNR-102 pour l’exposition aux irradiations dans le cadre d’un environnement

d’accès libre. Cet émeeur ne doit pas être situé à proximité ou fonctionner simultanément avec une autre antenne ou émeeur. Cet

équipement doit être installé et mis en fonctionnement à une distance minimale de 20 cm (8 po) entre le radiateur et le corps de l'utilisateur.

Vos avis et aide

Nous serions ravis de connaître votre avis. N’hésitez pas à aribuer une note et à nous faire part de vos commentaires par le biais de vos bons de

commande. Si vous avez besoin d’aide concernant un produit, connectez-vous à votre compte et accédez à la page de contact du service client.

Instrucciones de seguridad .................................................................................................................................................................................................................................................. 15

Contenido del paquete ............................................................................................................................................................................................................................................................ 15

Compatibilidad ...................................................................................................................................................... ...................................................................................................................... 15

Descripción del producto ...................................................................................................................................................................................................................................................... 16

Conguración del tomacorriente inteligente ................................................................................................................................................................................................................16

Métodos de conguración alternativos ....................................................................................................................................................... ....................................................................16

Uso del tomacorriente inteligente ..................................................................................................................................................................................................................................... 17

Solución de problemas ....................................................................................................................................................... ..................................................................................................... 18

Mi tomacorriente inteligente no se conecta a Alexa. ...................................................................................................................................................... ..................................... 18

Mi dispositivo conectado no se enciende/apaga con la aplicación Alexa. ................................................................................................................................................... 18

No puedo cambiar la conguración de mi tomacorriente inteligente. ........................................................................................................................................................ 18

Si pierdo la Guía de instalación rápida o no dispongo del código de barras, ¿cómo puedo congurar mi tomacorriente inteligente? .......................... 18

Código de error (-1 :-1 :-1 :-1) se muestra en la pantalla. ........................................................................................................................................................................................18

Especicaciones ........................................................................................................................................................................................................................................................................18

Marcas ............................................................................................................................................................................................................................................................................................ 19

Comentarios y ayuda ...............................................................................................................................................................................................................................................................19

Contenido

Instrucciones de seguridad

Lea atentamente estas instrucciones y consérvelas para su uso futuro. Si este tomacorriente inteligente se cede a un tercero, deberán

incluirse estas instrucciones.

Al utilizar tomacorrientes inteligentes, deben seguirse siempre las precauciones básicas de seguridad para reducir el riesgo de incendio,

descarga eléctrica y/o lesiones a las personas, incluyendo las siguientes:

ADVERTENCIA

» El límite de corriente total del aparato es de 15 amperios. Para evitar daños, no supere el límite de 15 amperios. Si se crea un cortocircuito

directo en la salida, el tomacorriente inteligente se dañará y dejará de funcionar.

» No desarme el producto ni lo repare usted mismo. Corre el riesgo de sufrir una descarga eléctrica y de anular la garantía limitada. Si necesita

asistencia técnica, póngase en contacto con el servicio de atención al cliente.

» Asegúrese de utilizar este producto junto con un disyuntor o fusible de 15 A en el circuito ascendente.

» Durante la instalación deben respetarse los requisitos aplicables. El incumplimiento de los requisitos puede provocar daños materiales y/o

lesiones, o incluso peligro de muerte.

» Antes de conectar un producto, tenga en cuenta los datos técnicos, en particular la potencia de conmutación máxima admisible del relé y el

tipo de aparato que va a conectar. Toda la información sobre cargas se reere a cargas óhmicas. El dispositivo sólo debe cargarse hasta el

límite de potencia especicado. La sobrecarga puede provocar la destrucción del aparato, un incendio o un accidente eléctrico. Entre otras

cosas, no se puede garantizar la desconexión able del producto conectado.

» Los aparatos con fuentes de alimentación electrónicas (por ejemplo, televisores o luces LED de alta tensión) no constituyen una carga óhmica.

Pueden generar corrientes de arranque de más de 100 A. La conmutación de estos productos provoca un desgaste prematuro del relé

integrado. Como resultado, es posible que el producto conectado no se apague de forma segura.

» No conecte aparatos que puedan provocar incendios u otros daños si se encienden sin vigilancia (por ejemplo, planchas).

» Desconecte siempre el dispositivo del enchufe inteligente antes de realizar cambios en él.

» Coloque siempre los cables de los dispositivos conectados de forma que no puedan representar un peligro para las personas o los animales

domésticos.

» Durante la planicación, la instalación, el funcionamiento y el mantenimiento deben respetarse las normas y directivas vigentes en su país.

» No utilice el tomacorriente inteligente con barras de enchufe ni con cables de extensión.

» No utilice el tomacorriente inteligente para la desconexión. La carga no está aislada eléctricamente de la red.

» No conecte tomacorrientes inteligentes entre sí.

» El tomacorriente inteligente sólo se queda sin corriente cuando se retira del tomacorriente de pared.

Uso previsto

» Sólo para uso en interiores.

» No utilizar en lugares húmedos.

Contenido del paquete

» B0CL9C4PYT: Tomacorriente inteligente (1)

B0CL9CG87N:

Tomacorrientes inteligentes (2)

B0CL9D9HM4: Tomacorrientes inteligentes (4)

» Manual de seguridad

» Guía de instalación rápida

Compatibilidad

» Red de Wi-Fi de 2.4 GHz

» Toma con conexión a tierra tipo B (Estados Unidos)

» Dispositivo conectado con una salida máxima de 15 A (carga resistiva)

» Dispositivo iOS/Android/Fire OS con la aplicación Alexa

Descripción del producto

Conguración del tomacorriente inteligente

Puede congurar el tomacorriente inteligente con el código QR que aparece en la parte posterior de su copia impresa Guía de conguración rápida

(recomendado) o en la parte posterior del producto. También puedes congurarlo sin el código QR.

Conguración con la Guía de conguración rápida Código QR (Recomendado)

1. Descargue la última versión de la aplicación Alexa de la tienda de aplicaciones e inicie su sesión.

2. Enchufe el tomacorriente inteligente de Amazon Basics.

3. En la aplicación Alexa, toca

(Más) en el menú inferior y, a continuación, toca Agregar dispositivo.

4. Toque Plug (Tomacorriente) y, a continuación, toque Amazon Basics.

5. Siga los pasos de la aplicación Alexa para completar la conguración. Cuando se le pida, escanee el código QR que aparece en la parte posterior

de la copia impresa Guía de conguración rápida. Si tiene más de un tomacorriente inteligente y está escaneando el código QR en su Guía de

instalación rápida haga coincidir el número DSN del tomacorriente inteligente con el código QR.

AVISO

No escanee el código de barras del embalaje. Si falla la lectura del código de barras, consulte “Métodos de conguración

alternativos” on page 16.

Scan QR code below or on smart plug for Alexa setup.

Numériser le code QR ci-dessous ou sur la prise

intelligente pour la con guration d'Alexa.

Escanea el código QR que aparece a continuación o en el

enchufe inteligente para con gurar Alexa.

DSN:

XXXXXXXXXXXX

Métodos de conguración alternativos

Opción 1: Conguración con el código QR que aparece en la parte posterior del producto.

1. Descargue la última versión de la aplicación Alexa de la tienda de aplicaciones e inicie la sesión.

2. Enchufe el tomacorriente inteligente de Amazon Basics.

3. En la aplicación Alexa, toca

(Más) en el menú inferior y, a continuación, toca Agregar dispositivo.

4. Toque Plug (Tomacorriente) y, a continuación, toque Amazon Basics.

Código QR

(en la parte posterior

del producto)

Tomacorriente tipo B

Indicador LED

Botón de encendido/

reinicio

Código QR en el reverso de la Guía rápida de

instalación

5. Siga los pasos de la aplicación Alexa para completar la conguración. Cuando se le solicite, escanee el código QR de la parte posterior del

producto.

AVISO

No escanee el código de barras del embalaje. Si el escaneo del código de barras falla o pierde el Guía de conguración rápida

consulte “Opción 2: Conguración sin código de barras” on page 17.

Opción 2: Conguración sin código de barras

Utilice estas instrucciones si la conguración del código QR no funciona.

1. Enchufe el tomacorriente inteligente de Amazon Basics.

2. En la aplicación Alexa, toca

(Más) en el menú inferior y, a continuación, toca Agregar dispositivo.

3. Toque Plug (Tomacorriente) y, a continuación, toque Amazon Basics.

4. Cuando se le pida que escanee el código de barras, toque ¿NO TIENE CÓDIGO DE BARRAS?

5. Toque NEXT (siguiente) y siga las instrucciones en pantalla para completar la conguración.

Interpretación del indicador LED

Indicador Descripción

El LED se ilumina en rojo durante 1 minuto El tomacorriente inteligente no está registrado

El LED parpadea rápidamente en rojo durante 1 minuto El tomacorriente inteligente está desconectado

El LED se ilumina en verde durante 3 segundos El tomacorriente inteligente está conectado

El LED parpadea en rojo y verde alternativamente

El tomacorriente inteligente se restablece a los valores

predeterminados de fábrica

El LED parpadea en verde rápidamente durante 5 minutos El tomacorriente inteligente está listo para congurarse

LED apagado El tomacorriente inteligente está apagado

Uso del tomacorriente inteligente

» Pulse el botón de encendido/reinicio para encender o apagar el tomacorriente inteligente

(y el dispositivo conectado).

» Use la app Alexa para encender y apagar el tomacorriente inteligente a distancia, establecer horarios y mucho más.

» Use el control de voz de su Amazon Alexa. Por ejemplo, puedes decir: "Alexa, enciende el primer enchufe"

Restablecimiento de los valores de fábrica

Mantenga pulsado el botón de encendido/reinicio durante 10 segundos hasta que el indicador parpadee en rojo y verde alternativamente.

Código QR

(en la parte posterior

del producto)

Solución de problemas

Si el tomacorriente inteligente no funciona correctamente, pruebe las siguientes soluciones.

Problema Soluciones

Mi tomacorriente inteligente no se

conecta a Alexa.

» Asegúrese de que su teléfono/tableta y la aplicación Alexa están actualizados a la última versión de

soware.

» Acerque el teléfono o la tableta al tomacorriente inteligente.

» Asegúrese de que el teléfono/tableta y el tomacorriente inteligente están conectados a la misma red

Wi-Fi de 2.4 GHz. El tomacorriente inteligente no es compatible con redes de

5 GHz.

» Si tiene un enrutador WiFi doble y ambas señales de red tienen el mismo nombre, cambie el nombre

de una e intente volver a conectarse a la red de 2.4 GHz.

» Asegúrese de escanear el código QR correcto proporcionado en su Guía de instalación rápida o en el

tomacorriente inteligente. Si tiene más de un tomacorriente inteligente y está escaneando el código

QR en su Guía de instalación rápida haga coincidir el número DSN del tomacorriente inteligente con el

código QR.

» Restablezca su tomacorriente inteligente a los valores de fábrica. Reérase a “Restablecimiento de

los valores de fábrica” on page 17.

Mi dispositivo conectado no se

enciende/apaga con la aplicación

Alexa.

» Asegúrese de que el dispositivo conectado al tomacorriente inteligente está encendido. Por ejemplo,

si ha conectado una lámpara, ponga el interruptor de la lámpara en la posición de encendido (“on”).

» Asegúrese de que el teléfono/tableta y el tomacorriente inteligente están conectados a la misma red

Wi-Fi.

» Restablezca el tomacorriente inteligente a los valores predeterminados de fábrica y, a continuación,

vuelva a congurarlo con Alexa. Reérase a “Conguración del tomacorriente inteligente” on page

16.

No puedo cambiar la conguración

de mi tomacorriente inteligente.

» Restablezca el tomacorriente inteligente a los valores predeterminados de fábrica y, a continuación,

vuelva a congurarlo con Alexa. Reérase a “Conguración del tomacorriente inteligente” on page

16.

Si pierdo la Guía de instalación

rápida o no dispongo del código de

barras, ¿cómo puedo congurar mi

tomacorriente inteligente?

» Puede congurar su dispositivo mediante dos métodos de conguración alternativos. Las

instrucciones se encuentran en “Métodos de conguración alternativos” on page 16.

Código de error (-1 :-1 :-1 :-1) se

muestra en la pantalla.

» Asegúrese de que el teléfono tiene el Bluetooth activado durante todo el proceso de conguración y

de que el dispositivo que intenta congurar está en modo de emparejamiento. Reinicie su dispositivo

apagándolo y encendiéndolo, y vuelva a congurarlo.

Especicaciones

Tensión de alimentación 120 V CA, 60 Hz

Máx. Corriente 15 A

Máx. Consumo de energía. 1 800 W (carga resistiva)

Detección de cantidades eléctricas No admitido

Temperatura ambiente -30 a 40 °C (-22 a 104 °F)

Temperatura de almacenamiento -20 ° a 60 °C (-4 ° a 140 °F)

Humedad de funcionamiento 10 %a90 % HR, sin condensación

Wi-Fi Red de 2.4 GHz, 802.11 b/g/n

Protocolo inalámbrico Wi-Fi + Bluetooth (Bluetooth sólo realiza el emparejamiento)

Clase de protección IP20

Autenticación cETLus/FCC ID IC

Marcas

El logotipo Wi-Fi CERTIFIED™ es una marca registrada de Wi-Fi Alliance®.

La marca denominativa Bluetooth® y sus logotipos son marcas registradas propiedad de Bluetooth SIG, Inc. y

cualquier uso de dichas marcas por parte de Amazon.com Services LLC se realiza bajo licencia. Las demás marcas y

nombres comerciales pertenecen a sus respectivos propietarios.

Comentarios y ayuda

Nos encantaría conocer tu opinión. Anímate a valorar y comentar tus órdenes de compra.

Si necesitas ayuda con tu producto, inicia sesión en tu cuenta y ve a “Servicio de atención al cliente” / “Contacto”.

amazon.com/pbhelp

V03-01/26

Amazon.com Services LLC, 410 Terry Ave N. Seale, WA 98109 USA • Amazon.com.ca ULC, 40 King Street West 47th Floor, Toronto, ON, M2H 3Y2, Canada • Importadora Amazon México, S. de R.L. de

C.V., Boulevard Manuel Ávila Camacho, #261 Piso 5 Colonia Polanco I Sección, Miguel Hidalgo, Ciudad de México, C.P.11510 México RFC:ACA140623TXA ( : 800-874-8725)

Amazon Commercial Services Pty Ltd, L 37 2-26 Park ST, Sydney NSW 2000 Australia • Amazon Commercial Services (South Africa), Wembley Square 2 - 134 Solan Street, Gardens, Cape Town,

Western Cape, 8001

FCC ID:2AB2Q-LA66701

IC:10256A-LA66701

** mbedTLS; version 2.28.1 -- hps://linkprotect.cudasvc.com/url?a=hps%3a%2f%2ls.mbed.org%2f&c=E,1,PnMr13Qxkewomy_zN-

4liPqKIpPPIaKue_iOMlr1g0bSgrSb6SzUaZwOoRuEWQqL-vWzhBFJvyTcK1i5BPGvt0N1AEzk5Izun9vW08U7NVOxOw,,&typo=1

** ESP-IDF; version 4.3.2 -- hps://github.com/espressif/esp-idf

** FlashDB; version 2.1.0 -- hps://github.com/armink/FlashDB

** Fal; version 1.0.0 -- hps://github.com/RT-Thread-packages/fal

Apache License

Version 2.0, January 2004

hp://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Denitions.

“License” shall mean the terms and conditions for use, reproduction, and

distribution as dened by Sections 1 through 9 of this document.

“Licensor” shall mean the copyright owner or entity authorized by the copyright

owner that is granting the License.

“Legal Entity” shall mean the union of the acting entity and all other entities

that control, are controlled by, or are under common control with that entity.

For the purposes of this denition, “control” means (i) the power, direct or

indirect, to cause the direction or management of such entity, whether by

contract or otherwise, or (ii) ownership of y percent (50%) or more of the

outstanding shares, or (iii) benecial ownership of such entity.

“You” (or “Your”) shall mean an individual or Legal Entity exercising

permissions granted by this License.

“Source” form shall mean the preferred form for making modications, including

but not limited to soware source code, documentation source, and conguration

les.

“Object” form shall mean any form resulting from mechanical transformation or

translation of a Source form, including but not limited to compiled object code,

generated documentation, and conversions to other media types.

“Work” shall mean the work of authorship, whether in Source or Object form, made

available under the License, as indicated by a copyright notice that is included

in or aached to the work (an example is provided in the Appendix below).

“Derivative Works” shall mean any work, whether in Source or Object form, that

is based on (or derived from) the Work and for which the editorial revisions,

annotations, elaborations, or other modications represent, as a whole, an

original work of authorship. For the purposes of this License, Derivative Works

shall not include works that remain separable from, or merely link (or bind by

name) to the interfaces of, the Work and Derivative Works thereof.

“Contribution” shall mean any work of authorship, including the original version

of the Work and any modications or additions to that Work or Derivative Works

thereof, that is intentionally submied to Licensor for inclusion in the Work

by the copyright owner or by an individual or Legal Entity authorized to submit

on behalf of the copyright owner. For the purposes of this denition,

“submied” means any form of electronic, verbal, or wrien communication sent

to the Licensor or its representatives, including but not limited to

communication on electronic mailing lists, source code control systems, and

issue tracking systems that are managed by, or on behalf of, the Licensor for

the purpose of discussing and improving the Work, but excluding communication

that is conspicuously marked or otherwise designated in writing by the copyright

owner as “Not a Contribution.”

“Contributor” shall mean Licensor and any individual or Legal Entity on behalf

of whom a Contribution has been received by Licensor and subsequently

incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this

Open Source Notice

License, each Contributor hereby grants to You a perpetual, worldwide, non-

exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce,

prepare Derivative Works of, publicly display, publicly perform, sublicense, and

distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License,

each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-

charge, royalty-free, irrevocable (except as stated in this section) patent

license to make, have made, use, oer to sell, sell, import, and otherwise

transfer the Work, where such license applies only to those patent claims

licensable by such Contributor that are necessarily infringed by their

Contribution(s) alone or by combination of their Contribution(s) with the Work

to which such Contribution(s) was submied. If You institute patent litigation

against any entity (including a cross-claim or counterclaim in a lawsuit)

alleging that the Work or a Contribution incorporated within the Work

constitutes direct or contributory patent infringement, then any patent licenses

granted to You under this License for that Work shall terminate as of the date

such litigation is led.

4. Redistribution. You may reproduce and distribute copies of the Work or

Derivative Works thereof in any medium, with or without modications, and in

Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a

copy of this License; and

(b) You must cause any modied les to carry prominent notices stating

that You changed the les; and

distribute, all copyright, patent, trademark, and aribution notices from the

Source form of the Work, excluding those notices that do not pertain to any part

of the Derivative Works; and

(d) If the Work includes a “NOTICE” text le as part of its distribution,

then any Derivative Works that You distribute must include a readable copy of

the aribution notices contained within such NOTICE le, excluding those

notices that do not pertain to any part of the Derivative Works, in at least one

of the following places: within a NOTICE text le distributed as part of the

Derivative Works; within the Source form or documentation, if provided along

with the Derivative Works; or, within a display generated by the Derivative

Works, if and wherever such third-party notices normally appear. The contents of

the NOTICE le are for informational purposes only and do not modify the

License. You may add Your own aribution notices within Derivative Works that

You distribute, alongside or as an addendum to the NOTICE text from the Work,

provided that such additional aribution notices cannot be construed as

modifying the License.

You may add Your own copyright statement to Your modications and may

provide additional or dierent license terms and conditions for use,

reproduction, or distribution of Your modications, or for any such Derivative

Works as a whole, provided Your use, reproduction, and distribution of the Work

otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any

Contribution intentionally submied for inclusion in the Work by You to the

Licensor shall be under the terms and conditions of this License, without any

additional terms or conditions. Notwithstanding the above, nothing herein shall

supersede or modify the terms of any separate license agreement you may have

executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names,

trademarks, service marks, or product names of the Licensor, except as required

for reasonable and customary use in describing the origin of the Work and

reproducing the content of the NOTICE le.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in

writing, Licensor provides the Work (and each Contributor provides its

Contributions) on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

KIND, either express or implied, including, without limitation, any warranties

or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A

PARTICULAR PURPOSE. You are solely responsible for determining the

appropriateness of using or redistributing the Work and assume any risks

associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in

tort (including negligence), contract, or otherwise, unless required by

applicable law (such as deliberate and grossly negligent acts) or agreed to in

writing, shall any Contributor be liable to You for damages, including any

direct, indirect, special, incidental, or consequential damages of any character

arising as a result of this License or out of the use or inability to use the

Work (including but not limited to damages for loss of goodwill, work stoppage,

computer failure or malfunction, or any and all other commercial damages or

losses), even if such Contributor has been advised of the possibility of such

damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or

Derivative Works thereof, You may choose to oer, and charge a fee for,

acceptance of support, warranty, indemnity, or other liability obligations

and/or rights consistent with this License. However, in accepting such

obligations, You may act only on Your own behalf and on Your sole

responsibility, not on behalf of any other Contributor, and only if You agree to

indemnify, defend, and hold each Contributor harmless for any liability incurred

by, or claims asserted against, such Contributor by reason of your accepting any

such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, aach the following boilerplate

notice, with the elds enclosed by brackets “[]” replaced with your own

identifying information. (Don’t include the brackets!) The text should be

enclosed in the appropriate comment syntax for the le format. We also

recommend that a le or class name and description of purpose be included on

the same “printed page” as the copyright notice for easier identication within

third-party archives.

Licensed under the Apache License, Version 2.0 (the “License”);

you may not use this le except in compliance with the License.

You may obtain a copy of the License at

hp://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, soware

distributed under the License is distributed on an “AS IS” BASIS,

WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

See the License for the specic language governing permissions and

limitations under the License.

* For mbedTLS see also this required NOTICE:

* For ESP-IDF see also this required NOTICE:

Copyrights and Licenses

----------------------------------

Soware Copyrights

----------------------------------

Espressif Systems. This source code is licensed under the Apache License 2.0 as

described in the le LICENSE.

Additional third party copyrighted code is included under the following

licenses.

Where source code headers specify Copyright & License information, this

information takes precedence over the summaries made here.

Some examples use external components which are not Apache licensed, please

check the copyright description in each example source code.

Firmware Components

----------------------------------

These third party libraries can be included into the application (rmware)

produced by ESP-IDF.

Newlib is licensed under the BSD License and is Copyright of various

parties, as described in COPYING.NEWLIB .

under the MIT License as reproduced in the individual header les.

hps://linkprotect.cudasvc.com/url?a=hps%3a%2f%2fAmazon.com&c=E,1,rcR04vML7ksKILbbC-iU83y1MzPihZaylIYhGs8mokDIZX_

SlCE8LkDdyxhnroP-sF8UZls9dE0zYNtMnt6t4Daa0m8VjDNCMqI-m89LW-1cNDCX1Fo7sXji&typo=1, Inc. or its aliates are licensed under the MIT

License, as

described in license.txt .

Swedish Institute of Computer Science and are licensed under the BSD License as

described in COPYING le .

contributors and licensed under the BSD license.

Public Domain Dedication license.

licensed under the BSD license.

Stewart Heitmann and licensed under 3-clause BSD license. argtable3 also

includes the following soware components. For details, please see argtable3

LICENSE le .

under 3-clause BSD license.

3-clause BSD license.

TCL library, Copyright the Regents of the University of California, Sun

Microsystems, Inc., Scriptics Corporation, ActiveState Corporation and other

parties, and licensed under TCL/TK License.

license .

is licensed under MIT license as described in LICENSE le .

2-clause BSD license.

Apache License 2.0 as described in LICENSE le .

MIT license as described in LICENSE le .

Stuehler, and is licensed under BSD license.

MQTT-ESP - Tuan PM <tuanpm at live dot com> is licensed under Apache License 2.0

as described in LICENSE le .

Corporation and licensed under Apache License 2.0.

Foundation, is licensed under Apache License 2.0 as described in LICENSE le .

----------------------------------

TLSF allocator Two Level Segregated Fit memory allocator, Copyright (c)

2006-2016, Mahew Conte, and licensed under the BSD 3-clause license.

openthread, Copyright (c) The OpenThread Authors, is licensed under BSD

License as described in LICENSE le .

licensed under the BSD 2-clause license.

HTTP Parser Based on src/hp/ngx_hp_parse.c from NGINX copyright Igor

Sysoev. Additional changes are licensed under the same terms as NGINX and

Joyent, Inc. and other Node contributors. For details please check LICENSE le.

Microcontroller GmbH, is licensed under BSD 1-clause license.

Documentation

----------------------------------

HTML version of the ESP-IDF Programming Guide uses the Sphinx theme

Inc. & contributors, and Espressif Systems (Shanghai) CO., LTD. It is based on

sphinx_rtd_theme. Both are licensed under MIT license.

ROM Source Code Copyrights

----------------------------------

Espressif SoCs mask ROM hardware includes binaries compiled from portions of

the following third party soware:

Newlib , licensed under the BSD License and is Copyright of various parties,

as described in COPYING.NEWLIB .

Xtensa libhal, Copyright (c) Tensilica Inc and licensed under the MIT

license (see below).

TinyBasic Plus, Copyright Mike Field & Sco Lawrence and licensed under the

MIT license (see below).

miniz, by Rich Geldreich - placed into the public domain.

contributors and licensed under the BSD license.

----------------------------------

Parts of Zephyr RTOS USB stack:

licensed under Apache 2.0 license.

(bertrik@sikken.nl), 2016 Intel Corporation and licensed under BSD 3-clause

license.

2017-2018 Intel Corporation and licensed under Apache 2.0 license.

Messtechnik GmbH and licensed under BSD 3-clause license.

licensed under Apache 2.0 license.

----------------------------------

Xtensa libhal MIT License

Permission is hereby granted, free of charge, to any person obtaining a copy

of this soware and associated documentation les (the “Soware”), to deal in

the Soware without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of

the Soware, and to permit persons to whom the Soware is furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included in

all copies or substantial portions of the Soware.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

----------------------------------

TinyBasic Plus MIT License

Permission is hereby granted, free of charge, to any person obtaining a copy

of this soware and associated documentation les (the “Soware”), to deal in

the Soware without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of

the Soware, and to permit persons to whom the Soware is furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included in

all copies or substantial portions of the Soware.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

----------------------------------

TJpgDec License

TJpgDec - Tiny JPEG Decompressor R0.01 (C) ChaN, 2011 The TJpgDec is a

generic JPEG decompressor module for tiny embedded systems. This is a free

soware that opened for education, research and commercial developments under

license policy of following terms.

The TJpgDec module is a free soware and there is NO WARRANTY.

No restriction on use. You can use, modify and redistribute it for personal,

non-prot or commercial products UNDER YOUR RESPONSIBILITY.

Redistributions of source code must retain the above copyright notice.

* For FlashDB see also this required NOTICE:

* For Fal see also this required NOTICE:

------

** uthash; version 2.1.0 -- hps://linkprotect.cudasvc.com/url?a=hps%3a%2f%2roydhanson.github.io%2futhash%2f&c=E,1,XS_C7bGvNJYwOLl9Z-

aN4KjDOGwwVKMXcZPYq3ToZHdiw6EU_x-w4NjGxfCKfcTfLGJ-T7BR26le9lqeSM_hfFUz1uoQY2l0D44benhBkyXfC394HFJsrTyMPp0,&typo=1

Redistribution and use in source and binary forms, with or without

modication, are permied provided that the following conditions are met:

* Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS

IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER

OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

------

** lwIP; version v2.0.3 -- hps://linkprotect.cudasvc.com/url?a=hp%3a%2f%2fsavannah.nongnu.org%2fprojects%2wip%2f&c=E,1,4xq4_NCo-

36suoOGxwKjNDoQ8mqRr1RK3r7MubtRC1d8Z5gNsFbLqPlAhaXT_ASKJ8IR9wL85fkpIX13A7sDZz9OyRtEJH8Hc8zc_7dt_

B5AKJn8dGp7g_19Fg,,&typo=1

Redistribution and use in source and binary forms, with or without modication,

are permied provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation

and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products

derived from this soware without specic prior wrien permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING

IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

------

** newlib; version 2.2.0 -- hps://github.com/espressif/esp-idf/blob/v4.3.2/components/newlib/COPYING.NEWLIB

The newlib subdirectory is a collection of soware from several sources.

Each le may have its own copyright/license that is embedded in the source

le. Unless otherwise noted in the body of the source le(s), the following

notices will apply to the contents of the newlib subdirectory:

(1) Red Hat Incorporated

This copyrighted material is made available to anyone wishing to use,

modify, copy, or redistribute it subject to the terms and conditions

of the BSD License. This program is distributed in the hope that

it will be useful, but WITHOUT ANY WARRANTY expressed or implied,

including the implied warranties of MERCHANTABILITY or FITNESS FOR

A PARTICULAR PURPOSE. A copy of this license is available at

hp://www.opensource.org/licenses. Any Red Hat trademarks that are

incorporated in the source code or documentation are not subject to

the BSD License and may only be used or replicated with the express

permission of Red Hat, Inc.

(2) University of California, Berkeley

Redistribution and use in source and binary forms, with or without modication,

are permied provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation

and/or other materials provided with the distribution.

* Neither the name of the University nor the names of its contributors

may be used to endorse or promote products derived from this soware

without specic prior wrien permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED.

IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY

OF SUCH DAMAGE.

(3) David M. Gay (AT&T 1991, Lucent 1998)

The author of this soware is David M. Gay.

Permission to use, copy, modify, and distribute this soware for any

purpose without fee is hereby granted, provided that this entire notice

is included in all copies of any soware which is or includes a copy

or modication of this soware and in all copies of the supporting

documentation for such soware.

THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY EXPRESS OR IMPLIED

WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY

REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY

OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

-------------------------------------------------------------------

The author of this soware is David M. Gay.

Permission to use, copy, modify, and distribute this soware and

its documentation for any purpose and without fee is hereby

granted, provided that the above copyright notice appear in all

copies and that both that the copyright notice and this

permission notice and warranty disclaimer appear in supporting

documentation, and that the name of Lucent or any of its entities

not be used in advertising or publicity pertaining to

distribution of the soware without specic, wrien prior

permission.

LUCENT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,

INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS.

IN NO EVENT SHALL LUCENT OR ANY OF ITS ENTITIES BE LIABLE FOR ANY

SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER

IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,

ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF

THIS SOFTWARE.

(4) Advanced Micro Devices

This soware is the property of Advanced Micro Devices, Inc (AMD) which

specically grants the user the right to modify, use and distribute this

soware provided this notice is not removed or altered. All other rights

are reserved by AMD.

AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS

SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR

USE OF THIS SOFTWARE.

So that all may benet from your experience, please report any problems

or suggestions about this soware to the 29K Technical Support Center at

800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or

0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118.

Advanced Micro Devices, Inc.

29K Support Products

Mail Stop 573

5900 E. Ben White Blvd.

Austin, TX 78741

800-292-9263

(5)

(6)

(7) Sun Microsystems

Developed at SunPro, a Sun Microsystems, Inc. business.

Permission to use, copy, modify, and distribute this

soware is freely granted, provided that this notice is preserved.

(8) Hewle Packard

To anyone who acknowledges that this le is provided “AS IS”

without any express or implied warranty:

permission to use, copy, modify, and distribute this le

for any purpose is hereby granted without fee, provided that

the above copyright notice and this notice appears in all

copies, and that the name of Hewle-Packard Company not be

used in advertising or publicity pertaining to distribution

of the soware without specic, wrien prior permission.

Hewle-Packard Company makes no representations about the

suitability of this soware for any purpose.

(9) Hans-Peter Nilsson

Permission to use, copy, modify, and distribute this soware is

freely granted, provided that the above copyright notice, this notice

and the following disclaimer are preserved with no changes.

THIS SOFTWARE IS PROVIDED ``AS IS’’ AND WITHOUT ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

(10) Stephane Carrez (m68hc11-elf/m68hc12-elf targets only)

The authors hereby grant permission to use, copy, modify, distribute,

and license this soware and its documentation for any purpose, provided

that existing copyright notices are retained in all copies and that this

notice is included verbatim in any distributions. No wrien agreement,

license, or royalty fee is required for any of the authorized uses.

Modications to this soware may be copyrighted by their authors

and need not follow the licensing terms described here, provided that

the new terms are clearly indicated on the rst page of each le where

they apply.

(11) Christopher G. Demetriou

Redistribution and use in source and binary forms, with or without

modication, are permied provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products

derived from this soware without specic prior wrien permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS’’ AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

(12) SuperH, Inc.

This soware is the property of SuperH, Inc (SuperH) which specically

grants the user the right to modify, use and distribute this soware

provided this notice is not removed or altered. All other rights are

reserved by SuperH.

SUPERH MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO

THIS SOFTWARE. IN NO EVENT SHALL SUPERH BE LIABLE FOR INDIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM

THE FURNISHING, PERFORMANCE, OR USE OF THIS SOFTWARE.

So that all may benet from your experience, please report any problems

or suggestions about this soware to the SuperH Support Center via

e-mail at sow[email protected] .

SuperH, Inc.

405 River Oaks Parkway

San Jose

CA 95134

USA

(13) Royal Institute of Technology

(Royal Institute of Technology, Stockholm, Sweden).

Redistribution and use in source and binary forms, with or without

modication, are permied provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. Neither the name of KTH nor the names of its contributors may be

used to endorse or promote products derived from this soware without

specic prior wrien permission.

THIS SOFTWARE IS PROVIDED BY KTH AND ITS CONTRIBUTORS ``AS IS’’ AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL KTH OR ITS CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

(14) Alexey Zelkin

Redistribution and use in source and binary forms, with or without

modication, are permied provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS’’ AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE.

(15) Andrey A. Chernov

Redistribution and use in source and binary forms, with or without

modication, are permied provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS’’ AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE.

(16) FreeBSD