User Manual
Product Parameters:
Product Name: Wireless Microphone
Transmission frequency band: 2.4GHz
Transmission delay: less than 12ms
Sensitivity: -45dB
Frequency response: 20-20KHz
Connector: 3.5mm/6.35mm
Charging port: Type-c charging port
Battery: Polymer lithium battery 300mAH
Transmission distance: 20-40 meters
A: 3.5mm plug with 6.35MM single tone adapter, receiver connected to
speaker or mixing console,
B: Press and hold for 2 seconds to turn on the device. After turning on,
the device will automatically connect and the green light will remain on,
C: Indicator light, red indicator light when charging, fully charged light
turns off
D: Type-C charging port The charging cable provided with this product
is a dual Type-C charging port,
E: Press and hold the volume up/down button to adjust the volume
up/down.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
A
D
B
D
E
C
TRANSMITTER
RECEIVER
