360˚ CERAMIC HEATER
10” | 1500 / 750W
MODEL 1VAHCS10
OWNER’S MANUAL
2 3
CONTENTSCONTENTS
(Continued)
Safety Guidelines ....................................................................................4-5
Safety Features ............................................................................................6
Product Diagram .........................................................................................7
Instructions for Use .....................................................................................8
Care and Maintenance ................................................................................9
Troubleshooting ........................................................................................10
IMPORTANT NOTE:
Read the manual carefully. Make sure to save this manual for future reference.
Illustrations in this manual are for explanatory purposes only, your actual
product may look slightly dierent.
CONSUMER PRODUCT INFORMATION
For your own records, please attach a copy of your sales receipt to this manual.
Also, write the store name/location and date purchased below:
Store Name: ___________________________________________________________
Location: ______________________________________________________________
Date Purchased: _______________________________________________________
TECHNICAL DATA
Model: 1VAHCS10
Voltage: 120V~ / 60Hz
Amps: 12.5
Watts: 750 / 1500W
4 5
SAFETY GUIDELINES
WARNING: Read and understand this entire owner’s manual, including all
safety information, before electric shock, or serious personal injury.
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
When using this electric unit, basic safety precautions should always be
followed to reduce the risk of re, electric shock, and injury to persons,
including the following:
1. Read ALL instructions before using this unit.
2. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater
yourself.
3. This heater may get hot when in use. To avoid burns, DO NOT let bare skin
touch hot surfaces. If provided, use handle(s) when moving this heater.
DO NOT place it against walls, furniture, curtains, etc.
4. Keep combustible materials, such as furniture, pillows, bedding, paper,
clothes, and curtains at least 3 ft from the front of the heater and keep
them away from the sides, top, and rear. DO NOT place towels or other
objects on the heater.
5. Extreme caution is necessary when any heater is used.
6. DO NOT operate any heater with a damaged cord or after the heater
malfunctions, has been dropped or damaged in any manner. Return heater
to authorized service facility for examination, electrical or mechanical
adjustment, or repair.
7. This heater is not intended for use in bathrooms, laundry areas, showers
or swimming pools and similar locations. NEVER locate heater where
it may fall into a bathtub or other water container. To protect against
electrical hazards, DO NOT immerse in water or other liquids.
8. DO NOT touch the control panel or plug with a wet hand.
9. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs,
runners, or similar coverings. Arrange cord away from trac area and
where it will not be tripped over.
10. DO NOT insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or re, or damage the heater.
SAFETY GUIDELINES
11. To prevent a possible re, DO NOT block the air intakes or exhaust in any
manner. DO NOT use on soft surfaces, like a bed, where openings may
become blocked.
12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas
where gasoline, paint, explosive and/or ammable liquids are used or
stored. Keep unit away from heated surfaces and open ames.
13. Always plug heaters directly into a wall outlet/receptacle. Never use with
an extension cord or relocatable power tap (outlet/power strip).
14. To avoid re or shock hazard, plug the unit directly into a 120 V AC
electrical outlet.
15. To disconnect heater, turn controls to OFF, then remove plug from outlet.
Pull rmly on the plug, DO NOT unplug by pulling on the cord.
16. Always unplug the unit before moving or cleaning, or whenever the heater
is not in use.
17. Use only for intended household use as described in this manual. Any
other use not recommended by the manufacturer may cause re, electric
shock, or injury to persons. The use of attachments not recommended or
sold by unauthorized dealers may cause hazards.
18. Always use on a dry, level surface. Use on oor only.
19. DO NOT use outdoors.
20. WARNING: To reduce the risk of re or electric shock, DO NOT use this unit
with any solid-state speed control device.
21. DO NOT attempt to repair or adjust any electrical or mechanical functions
on this unit. Doing so will void your warranty. The inside of the unit
contains no user serviceable parts.
22. Always use the product in an upright position.
(Continued)
6 7
HEADLINE
(Continued)
PRODUCT DIAGRAM
SAFETY FEATURES
IN THE BOX
• Ceramic Heater
• Owner’s Manual
TIP-OVER SAFETY FEATURE
This heater is equipped with a shut-o safety feature. Once the heater is tipped
over, an internal switch will automatically shut the heater o. Once the heater is
restored to an upright position, the heater will reset.
OVERHEAT SAFETY FEATURE
This heater is equipped with an overheat safety feature. When the heater’s
internal components reach a certain temperature that could cause overheating
and possible re, the heater will automatically shut o.
• A thermal overload protector is built in to prevent overheating. When an
“overheat” temperature is reached, the heater will automatically shut o.
Operation can resume only when the user resets the unit.
• To reset the unit, unplug the heater, ensure the power is turned o, and
wait 15 to 20 minutes for the unit to cool down.
• Follow INSTRUCTIONS FOR USE to return heater to operating mode.
WARNING: It is normal for the power cord to feel warm to the touch;
however, a loose t between the outlet and the plug may cause overheating
of the plug. If this occurs, try inserting the plug into a dierent outlet.
Contact a qualied electrician to inspect the original outlet for damage.
Handle
Hot Air Outlet
Thermostat
Knob
Power Light
Power Knob
Tip-Over Safety Switch
(on the bottom of the unit)
98
CARE AND MAINTENANCEINSTRUCTIONS FOR USE
1. Place the product on a rm, level surface.
2. Plug the unit directly into a 120V AC electrical outlet.
3. Rotate the POWER KNOB clockwise to select between (fan only), (low heat)
or (high heat). LOW position operates the heater at 750 watts conserving
energy and HIGH position operates the heater at a maximum 1500 watts.
4. Turn the THERMOSTAT KNOB clockwise to the highest setting.
5. When the room reaches a comfortable temperature, slowly turn the
THERMOSTAT KNOB counter-clockwise until the heating element
clicks OFF.
6. This is the point at which the Thermostat setting equals the room
temperature. At this setting, the Thermostat will automatically turn the
heater ON and OFF to maintain the selected temperature.
7. Turn the POWER KNOB to OFF and unplug the heater when nished using.
1. Turn the POWER KNOB to 0 (OFF) position.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp
cloth. A mild detergent can be used if necessary.
4. After cleaning, dry the unit with a soft cloth.
5. Wait until the unit is completely dry before use.
WARNING
• DO NOT let liquid enter the heater.
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
• DO NOT immerse the heater in water.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt
build-up, use the original packaging to repack the unit.
NOTICE: When the heat function is used for the rst time, a slight odor
may be present. This is normal and should not occur again unless the heater
is not used for an extended period of time.
NOTICE: It is normal for the heater to cycle ON and OFF as it maintains
the preset temperature. To prevent the unit from cycling, you need to
change the thermostat setting.
1110
TROUBLESHOOTING
If the heater will not operate, please check the following:
1. Check if the power cord is plugged into an electrical outlet. If not, plug in
unit to appropriate outlet.
2. Check if electricity to the outlet is working.
3. Ensure power is turned to ON position.
4. Make sure heater is placed on a solid surface.
5. See SAFETY FEATURES section for additional information.
6. Turn the THERMOSTAT KNOB clockwise. The heater only works when the
set temperature is higher than room temperature.
NOTICE: The product is equipped with an overheat safety feature
protector which will switch o the heater in case of accidental over heating
(ex. Obstruction of air intake and outlet grills, motor turning slowly or not
at all).
NOTICE: The product is equipped with tip-over switch inside. When
the product tips over abnormally during its use, it can cut o power
automatically.
833-950-1185 | support@visionairproducts.com
www.visionairproducts.com
4560 W. 160th Street
Cleveland, OH 44135
Printed in China | 0323_M029
