
SSI 0880BZ
EN
HANDHELD GARMENT STEAMER
Translation of the original manual

SSI 0880BZ

A
1
2
3
4
5
6
7
8
10 11
9

– 1 –
08/2024
2024, .
EN
Handheld Garment Steamer
User Manual
Important Safety Instructions
READ CAREFULLY AND STORE FOR FUTURE USE.
• This appliance may be only used by children aged
8years and older and by persons with physical, sensory
or mental impairments or lack of experience and
knowledge, if they are supervised or have been instructed
on the safe use of the appliance and understand the
potential hazards.
• Children must not play with the appliance. Cleaning and
maintenance must not be performed by children without
supervision.
• If the power cord is damaged, have it replaced in
aprofessional service centre in order to prevent
adangerous situation. It is forbidden to use the appliance
with the power cable damaged.
• The iron must not be left unattended when connected to
apower socket.
• The plug must be pulled out of the socket before filling the
water tank or cleaning.
• The filling hole must not be opened during use.
• The iron must be used and used and placed on aflat and
stable surface.
• When placing the iron on the stand, ensure that the
surface on which the stand is located is stable.
• The iron must not be used if it has fallen, if there are visible
signs of damage, or if it leaks.

– 2 –
08/2024
2024, .
• Do not leave the iron and its power supply within reach
of children under 8 years of age when it is powered or
cooling.
Caution: Hot Surface
Surfaces may become hot during use.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Pay extra attention to the appliance as it produces steam.
• Before connecting the base to the power socket, ensure that the voltage indicated on its rating plate matches the voltage in the socket.
• Connect the base only to aproperly grounded socket. Do not use an extension cord.
• Do not touch the iron with wet or moist hands when connected to the power socket.
• To prevent the risk of electric shock, do not wash the iron under running water, spray it with water, or immerse it in water or any other liquid.
• Ensure that the power cable does not come into contact with water, moisture or aheated surface.
• Do not place heavy objects on the power cord. Ensure that the power cord does not hang over the edge of the table or touch hot surfaces or sharp
objects.
• Disconnect the iron from the power socket by pulling the plug of the power cable, not the cable itself. Otherwise, damage to the power cable or the
socket may occur.
• Do not pull or carry the iron by the power cable.
• To avoid the risk of electric shock, do not repair the iron or base yourself or modify them in any way. All repairs should be carried out by an
authorised service centre. By interfering with the product, you risk losing the legal right to defective performance or warranty for quality.
• The iron is designed for use in the home and indoors. Do not use it in an industrial environment or outdoors.
• The iron is designed for ironing laundry and fabrics that are suitable for ironing. Do not use the iron for any purpose other than its intended use. Do
not modify the iron for any other use.
• Do not place the iron on or near an electric or gas stove or other sources of heat.
• Do not use the iron in damp or dusty environments. Do not expose the iron to direct sunlight.
• Never iron clothes while wearing them.
• Do not touch the hot soleplate. Otherwise, burns may occur.
• Ironed clothes may be hot immediately after removing the iron. Take extra care to avoid burns.
• Never fill the water tank directly under the tap. Always use asuitable container for filling the tank. Do not add vinegar, descalers, or other additives to
the tank.
• Before cleaning or any other handling of the iron that you have disconnected from the power socket, allow the soleplate to cool down.
• This appliance is not intended for operation through an external timer switch or aremote control.
• When cleaning, follow the instructions inthis manual.
• Do not repair the iron yourself. It does not contain user serviceable parts. All repairs should be carried out only by an authorised service centre.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXPLANATION OF SYMBOLS PLACED ON THE PRODUCT OR INTHE ACCOMPANYING DOCUMENTATION
This product meets all the basic requirements of the applicable EU directives.
This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal
waste.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

– 3 –
08/2024
2024, .
• Thank you for purchasing our SENCOR product; we hope it will serve
to your satisfaction.
• Before using this appliance, please familiarise yourself with the user
manual, even if you are already familiar with using similar types of
appliances. Use the appliance only as described in this user manual.
Keep the manual for future reference.
• It is recommended to keep the original packaging, packing material,
receipt and confirmation of the extent of the seller'sliability or warranty
certificate at least for the duration of the legal right of defective
performance or quality guarantee. When transporting the appliance,
we recommend packaging it again in the original box provided by the
manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE IRON
A1 SET button
A2 Display
A3 Water tank lid
A4 Soleplate
A5 Power cord end
A6 Handle
A7 Steam pulse button with lock
A8 Water tank
A9 Resting area
A10 Brush
A11 Measuring cup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PURPOSE OF USE
• The iron is intended for ironing clothes, fabrics, or materials specifically
designed for ironing. Refer to the information label on the clothes,
fabric or material.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE FIRST USE
• Before first use, remove the appliance and its accessories form the
packaging and discard all promotional labels and tags. Check that
neither the appliance nor any of its components is damaged.
• Wipe the soleplate of the iron with alightly damp cloth and then dry
it. Also, wipe the outer parts of the iron with adry or lightly damp cloth
and dry them thoroughly.
• Fill the tank with clean water and then empty it. This removes any dirt
in thetank.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION FOR USE
Filling the Water Tank
Warning:
Always ensure that the iron is switched off and the
power cable is disconnected from the power socket
before filling the tank.
We recommend using only distilled or demineralised
water.
1. Open the water tank lid and tilt the iron slightly.
2. Pour clean cold water using ameasuring cup. Wipe any spilled
water with adry cloth.
3. Close the cover. Press gently until you hear aclick.
• Use afilling measuring cup when filling the tank. Do not fill the water
tank directly from the tap.
• Do not overfill the tank. Always fill to the MAX mark indicated on the
tank during filling.
Warning:
Never fill the tank with hot or boiling water, service
water or any other liquid. Do not add water softener,
vinegar, starch, descaling agent, perfume mixes, or
other additives.
First Use of the Iron
• Before the first use of the iron, we recommend ironing asmall damp
cloth or towel with the iron at ahigh temperature to remove any
possible residues on the soleplate.
• You may notice astrange smell during the first use. This is anormal
occurrence. It disappears with use.
• During the first use of the iron, small particles or impurities may come
out of the holes on the soleplate. Do not be surprised or disturbed by
this. This does not affect the proper functioning of the iron.
Note:
During the heating process of the soleplate, asmall amount
of water may flow from the soleplate. This is anormal
occurrence.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USING THE IRON
1. Place the iron on the resting surface on the ironing board or the area
where you will be ironing.
2. Put the brush on as needed. We recommend using the brush if you
will be ironing/steaming delicate fabrics.
3. Unwind the power cord completely andplug the power cord plug
into aproperly grounded power socket.
4. The power-on light comes on.
5. Press the SET button briefly to switch the iron on. The iron will start
to heat up andthe display will start the iron heating countdown. This
usually takes 20 seconds.
6. As soon as the display shows “0” and the
symbol lights up, the
iron is ready foruse.
7. Press the SET button briefly again andselect the iron mode:
0 – 1 – 2.
- 0: ironing without steaming, the symbol lights up;
- 1: ironing with steaming (minimum steam), the symbol lights
up;
- 2: steam ironing (maximum steam), the symbol lights up.
8. If you need the iron to generate maximum steam during use, press
the steam impulse button andkeep it pressed all the time. As soon
as you release it, the iron stops generating steam.
9. For asteady generation of steam (without having to keep the button
pressed), slide the button lock downwards. The button will lock
inthis position. To release the button, slide the lock upwards.
10. After ironing, press andhold the SET button until the display turns
off, andunplug the power cord from the power socket.
Warning:
HOT SURFACE AND HOT STEAM!
Be especially careful when ironing andhandling
the iron. The soleplate is very hot and the steam
temperature is high. Serious injury and burns can
occur with improper handling.
Never touch the soleplate with your hands! Do not
steam clothes directly on yourself or on others!
Warning:
Never leave the iron on unattended. Pay extra
attention if children are near the iron, even when it is
switched off.
Note:
The steam generation function can be selected only when
you set thesteam ironing. If you select ironing without
steam, the function will not be active.
Vertical Ironing
• The iron can also be used for vertical ironing of curtains, net curtains
and clothes that are hung on ahanger.
EN
Handheld Garment Steamer
User Manual

– 4 –
08/2024
2024, .
Warning:
Never use an iron to iron clothes that people have on.
• Select the temperature according to the type of fabric you will be
ironing. Grasp the iron by the handle and hold it against the garment or
curtain. Iron it by moving the iron from top to bottom.
Putting the Iron down during Ironing
• During ironing, place the iron on the resting surface on the heat-
insulated pad of the ironing board or on asafe spot on the ironing area.
Switching off the Iron
• After finishing ironing, place the iron on the resting surface and unplug
the power cord from the power socket. Allow the iron to cool before
cleaning.
Automatic Shutdown
• The automatic switch-off function switches off the heating element of
the iron if it remains motionless for approximately 5 minutes. In this
case, the power-on light will flash.
• Press the SET button to switch on the iron.
Protection against an Empty Tank
• The automatic steam supply during ironing will stop approximately
30to 40seconds after the iron detects an empty tank. “E” will appear
on the display and the
symbol will flash, which means that the
water tank needs to be refilled.
• Refill the water tank according to the instructions in the section “Filling
the Water Tank”.
• Press the SET button to continue ironing.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IRONING TIPS AND TRICKS
• Follow the care instructions foreach garment. Iron only solid-coloured
andheat-resistant fabrics. We recommend ironing theprinted clothes
inside out.
• Sort the clothes by temperature from low to high. Start ironing items at
alow temperature and gradually increase it, as the iron heats up faster
than it cools down.
• Never iron over areas with sweat stains or other stains. High heat will
set the stain making it difficult to remove.
• To prevent silk, wool, and synthetic fabrics from becoming shiny after
ironing, iron them inside out.
• Some materials are easier to iron when lightly damp.
• For fine fabrics, sprinkle water or iron over aslightly damp cloth. You
can also hold the iron about 2 cm above the fabric.
• Iron heavily wrinkled garments at ahigh temperature with steam and
use the steam boost function to loosen and straighten the fabric fibres.
• Avoid ironing zips, studs or other decorative parts of clothing. This
could damage the soleplate.
• To prevent wrinkling, select an appropriate spin speed when washing
and hang the laundry correctly on the clothesline or rack. Hang
certain clothing items, such as shirts, on hangers, and dry sweaters,
cardigans, etc., on aflat surface.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEANING AND MAINTENANCE
• Before cleaning the iron, unplug the power cord from the power socket
and allow the appliance to cool completely.
• Empty the water tank after each use. Do not leave water init.
• Do not use abrasive cleaning agents, solvents, etc. to clean any parts
of the appliance that could damage the surface of the appliance.
Warning:
To prevent the risk of electric shock, do not immerse
the appliance, power cable, or plug into water or any
other liquid.
Cleaning the Iron
• Wipe the soleplate of the iron with alightly damp cloth and then dry
it. Also, wipe the outer parts of the iron with adry or lightly damp cloth
and dry them thoroughly.
Removing Lime Scale Deposits
• Toremove water scale deposits, it is recommended to use asolution of
white vinegar andwater in aratio of 1 : 3.
• Pour the solution into the tank andallow it to act for awhile. Then pour
the solution andpour clean water into the tank. Shake the iron slightly
and pour out the water.
• Repeat the procedure if needed.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STORAGE
• If you are not going to use the iron, switch it off, unplug it from the
power socket and leave it to cool down completely. Empty the water
tank.
• Store the iron in adry, clean and well-ventilated place where it will not
be exposed to extreme temperatures and where it will be out of reach
of children or pets.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS
Rated voltage range ..............................................................................220−240 V~
Rated frequency ......................................................................................... 50−60 Hz
Rated power input ...............................................................................1400–1800 W
Water tank capacity ...........................................................................................180 ml
Continuous steam output .....................................................................18–25 g/min
Changes to text and technical parameters are reserved.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED
PACKAGING MATERIAL
Dispose of used packaging material at the location designated by the
municipality for waste disposal.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
For proper disposal and recycling of these products, deliver them to
designated collection points. Alternatively, in some European Union states
or other European countries the products can be returned to the local
retailer when buying an equivalent new product. By properly disposing of
this product, you help preserve valuable natural resources and contribute
to preventing potential negative impacts on the environment and human
health resulting from improper waste disposal. For further details, contact
your local authorities or the nearest collection point. Fines may be
imposed for improper disposal of this type of waste in accordance with
national regulations.
For Business Entities in European Union States
To dispose of electric or electronic equipment, request necessary
information from your retailer or supplier.
Disposal in Other Countries Outside the European Union
To dispose of this product elsewhere, request necessary information on
the correct disposal method from local authorities or your retailer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

