SWK 0940BK
EN
DUAL WALL VARIABLE TEMPERATURE
ELECTRIC KETTLE
Translation of the original manual
SWK 0940BK
A
1
6
2
3
5
4
7
B
3
4
5 6
2
1
- 1 -
01/2026
2026, .
EN
Dual wall variable temperature electric kettle
User Manual
Important Safety Instructions
READ CAREFULLY AND STORE FOR FUTURE USE.
• This appliance may be only used by children aged 8
years and older and by persons with physical, sensory or
mental impairments or lack of experience and knowledge,
if they are supervised or have been instructed on the safe
use of the appliance and understand the potential hazards.
• Children must not play with the appliance.
• Cleaning and user maintenance shall not be done
by children unless they are older than 8 years and
supervised.
• Keep the appliance and its power cord out of reach of
children younger than 8 years of age.
• If the mains cable is damaged, have it replaced in
aprofessional service centre in order to prevent
adangerous situation. Never use the appliance if the
power cable is damaged.
• This appliance is intended for household use. It is also
suitable for personal non-commercial use in spaces
suchas:
– kitchenettes in shops, offices and other workplaces;
– agriculture;
– hotels, motels and other residential spaces;
– bed and breakfast establishments.
- 2 -
01/2026
2026, .
• Do not submerge the kettle or its base in water or another
liquid.
• If the kettle is overfilled, hot water may splash out.
WARNING:
Do not open the lid while the water is boiling.
CAUTION:
Position the lid so that the steam is directed away
from the handle.
• Use the kettle only withthe supplied base. Do not use the
base with other types of appliances.
CAUTION:
Make sure the appliance is switched off before
removing it from the base.
WARNING:
Prevent the plug from getting wet.
• Rinse the inside of the kettle with clean water. Follow the
cleaning instructions in the “Cleaning and Maintenance”
section.
WARNING:
Incorrect use may lead to injury.
• The surface of the heating element contains residual heat
after use. Do not touch the hot surface.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Before connecting the kettle to power, make sure that its power ratings match those of the wall socket.
• Connect the kettle only to aproperly grounded socket.
• Do not place the kettle on windowsills, sink drain trays or unstable surfaces. Always place it on astable, flat and dry surface.
• Do not place the kettle on an electric or gas stove or in its vicinity, do not place it in the vicinity of an open fire or an appliance that is asource of heat.
- 3 -
01/2026
2026, .
• Never use the kettle in the near vicinity of abath, shower or swimming pool.
• Only use the kettle to heat up drinking water. Do not use it towarm up other liquids or food.
• Do not fill the kettle with water when placed on the base. Remove the kettle from its base before filling. When filling, make sure that the water level
covers at least the minimum mark anddoes not exceed the maximum mark.
• Before turning the kettle on, make sure that the lid is closed properly.
• Do not turn on the kettle when it is empty. Incorrect use may negatively affect the appliance'slifetime. In case of accidental start-up without water,
the kettle is equipped with asafety lock to protect it from damage.
• Use the handle for lifting and carrying the kettle.
• Take great care to avoid scalding with boiling water or steam while pouring out water from the kettle.
• Do not pour ice-cold water into the kettle when it is hot.
• Always turn off the kettle and disconnect it from the power socket if it'snot to be used or if it'sto be left unattended or before moving or cleaning it.
• Unplug the kettle from the power socket by pulling the plug, not the cord. Otherwise, damage to the power cable or socket could occur.
• To avoid the risk of electric shock, do not repair and/or make any adjustments to the electric kettle by yourselves. All repairs should be carried out
by an authorised service centre. Tampering with the appliance may result in the loss of your legal rights regarding faulty performance or warranty
for quality.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PREVENTION OF HOUSEHOLD ACCIDENTS
Hot or boiling liquids pose asignificant risk to children, and even minor burns can be serious. Observe basic household injury prevention rules and
exercise increased caution when children are near hot or boiling liquids. If necessary, explain to children the risks associated with hot or boiling liquids.
In the event of burns or scalds, immediately rinse the affected area under astream of cold water and seek medical assistance if required.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXPLANATION OF SYMBOLS PLACED ON THE PRODUCT OR INTHE ACCOMPANYING DOCUMENTATION
This symbol on products or accompanying documents means that used electric or electronic products must not be added to ordinary
municipal waste.
This product meets all the basic requirements of the applicable EU directives.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- 4 -
01/2026
2026, .
• Thank you for purchasing our SENCOR product; we hope it will serve
to your satisfaction.
• Before using this appliance, please familiarise yourself with the user
manual, even if you are already familiar with using similar types of
appliances. Use the appliance only as described in this user manual.
Keep the manual for future reference.
• It is recommended to keep the original packaging, packing material,
receipt and confirmation of the extent of the seller'sliability or warranty
certificate at least for the duration of the legal right to file defect
claims or the quality warranty. When transporting the appliance,
we recommend repackaging it in the original box provided by the
manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DESCRIPTION OF THE KETTLE
A1 Lid
A2 Spout
A3 Body of the kettle with
awatermark inside
A4 Control panel
A5 Base with acentral connector
A6 Lid open button
A7 Handle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTROL PANEL
B1 Display (shows the current or
set temperature)
B2 Beverage buttons
B3 − button to decrease
temperature
B4 + button to increase
temperature
B5 Keep Warm button to select
preset temperatures
B6
On/Off button
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTENDED USE
• The SWK 0940BK kettle is designed toheat up drinking water to your
chosen temperature. At the same time, it is possible to activate the
keep warm function, when the kettle will maintain the set temperature
for amaximum of 1 hour.
• The double-walled design of the kettle provides increased safety
against burns.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEFORE FIRST USE OF THE KETTLE
• Remove all wrapping material from the kettle andits base. Check that
the kettle and its accessories are not damaged. Remove the protective
foil from the control panel.
• Fill the kettle with clean water up to the maximum water mark. Boil the
water and empty the contents of the kettle. To boil water in thekettle
proceed according to the instructions in the chapter “Using Your
Kettle”. Repeat this process 2 to 3 times.
• Now the kettle is ready for use.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USING YOUR KETTLE
Heat water to 100 °C
1. Place the base on astable, even and clean surface. Fully unwind the
power cord.
2. Press the button to open the lid and the lid will open. Fill the kettle with
the required amount of water. The water level must reach at least the
minimum mark, but must not exceed the maximum mark. The marks
are placed inside the kettle. After filling, close the kettle lid.
Warning:
Do not fill the kettle when placed on the base, not
even through the spout.
EN
Dual wall variable temperature electric kettle
User Manual
Note:
Do not fill the kettle above the maximum level as water
may splash out of the spout while it is boiling. Check that
the lid is properly closed before plugging the fork into the
power socket.
3. Place the kettle on the base. Insert the power plug into apower socket.
Abeep will sound and temperature of the water in the kettle will
appear on the display.
4. Press the
button. The temperature on the display will gradually
increase as the water in thekettle is heated.
5. As soon as the water in the kettle reaches the required temperature,
the kettle will automatically turn off and an acoustic alert will sound.
6. Pour the boiled water into aprepared container, cup or mug. Make
sure that it remains in avertical position when it is carried, particularly
if it is filled all the way up to the maximum mark.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HEATING WATER TO APRESET TEMPERATURE
AND MAINTAINING THAT TEMPERATURE
• This function makes it possible to maintain the set temperature in the
kettle after heating the water for amaximum of 1 hour.
• When the temperature sensor detects that the water temperature
inside the kettle has dropped, the kettle switches on and reheats the
water to the temperature you set. The kettle will then turn off.
1. Perform steps 1 to 3 from previous part “Heating water to 100 °C”.
2. Press one of the “Beverage buttons” to select the preset temperature.
Then press the Keep Warm button – see table below.
3. The kettle will automatically start heating after 3 seconds.
4. The temperature on the display will gradually increase as the water in
thekettle is heated.
5. As soon as the water in the kettle reaches the required temperature,
the kettle will automatically switch to the keep warm mode and three
sound alerts will sound.
6. The kettle will keep the temperature for up to 1hour.
7. After the set time has elapsed, the kettle automatically switches off.
8. Press the
button during the heating process or keep warm mode
to turn the kettle off manually.
Temperature table
ICON USAGE
Infant formula, baby cereals, etc.
Green tea
White tea
- 5 -
01/2026
2026, .
ICON USAGE
Instant coffee
100 °C Black tea
Note:
The Keep Warm function is not active for atemperature of
100 °C to prevent the water from boiling out anddamaging
the kettle.
Note:
If the water temperature inside the kettle is higher than
the set temperature, the kettle will beep andnot start. The
actual temperature in the kettle will appear on the display.
Warning:
Do not turn on the kettle when it is empty. The
incorrect use of the kettle may negatively affect its
lifetime. If you accidentally turn on the kettle without
water, after reaching acertain temperature the
thermostat will interrupt the electric circuit and turn off
the kettle. You can run it again after several minutes,
until the heating bottom has cooled down.
Note:
Asound is made each time abutton is pressed. This is
normal.
Heating water to arequired temperature
1. Perform steps 1 to 3 from previous part “Heating water to 100 °C”.
2. Press one of the “Beverage buttons” to select the preset temperature;
or manually adjust the temperature in the range from 40 °C to 95 °C
using the +/- buttons.
3. The kettle will automatically start heating after 3 seconds.
4. The temperature on the display will gradually increase as the water in
thekettle is heated.
5. As soon as the water in the kettle reaches the required temperature,
the kettle will automatically turn off and three sound alerts will sound.
For water heated in this way, the kettle will not maintain its
temperature.
6. Press the button during the heating process to turn the kettle off
manually.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEANING AND MAINTENANCE
• Before cleaning, make sure that the kettle is unplugged from the
mains socket andlet it cool down.
Warning:
Do not immerse the kettle, base, power cord or plug in
water or any other liquid.
Warning:
Do not use abrasive cleaning agents, solvents, etc.
to clean any parts of the appliance, as these could
damage the surface. None of the components of this
appliance are dishwasher safe.
• Toclean the external parts of the kettle use adry cloth or acloth
dipped in aweak solution of neutral kitchen detergent.
• After applying the kitchen detergent, wipe the surface with alightly
damp cloth andthen wipe dry.
• Clean the base using adry cloth only.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REMOVING LIMESCALE DEPOSITS
• As the limescale deposited in the kettle may adversely affect its
lifetime, remove it regularly dependingon the kettle use frequency.
• In addition, by removing the limescale, you can save electricity and
shorten the water boiling time without affecting the drink taste.
• During standard use (3 to 5 times per day), we recommend limescale
deposits be removed:
– once amonth in areas with hard and very hard water;
– once every two to three months inareas withsoft andmedium-
hard water.
• Scale build-up increases the noise level of the kettle.
• To remove the scale, we recommend the Sencor SESXD 001 liquid
agent. Follow the dosage and procedure instructions on the packaging
of the descaling agent.
Cleaning the Filter
• The kettle is equipped with aremovable limescale filter. This filter is
very fine andcaptures limescale pieces that might come loose when
the water boils. In order to ensure proper functioning, it is necessary to
clean the filter regularly.
• Open the lid and remove the filter from the inner wall of the spout.
• Wash the appliance under running water. For heavier soiling, wipe the
filter with asoft sponge.
• Put it back on the inner wall of the spout.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STORAGE
• If you are not going to use the appliance for an extended period of
time, disconnect the plug from the mains socket, allow the appliance
to cool down, and clean it according to the instructions in the
“Cleaning and Maintenance” section.
• Before storing, ensure that the appliance and all accessories are
thoroughly clean and dry.
• Store the appliance in adry, clean, and well-ventilated place away
from extreme temperatures and out of the reach of children or pets.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS
Rated voltage range ..............................................................................220–240 V~
Rated frequency ...........................................................................................50/60 Hz
Rated power input ............................................................................1,850–2,200 W
Capacity ....................................................................................................................... 1.7 l
Values Provided according to Commission Regulation EU
2023/826
Off Mode
Power consumption in off mode 0.4 W
Time needed for the equipment to automatically reach off
mode
–
Standby Mode
Power consumption in Standby mode –
Time needed for the equipment to automatically reach
standby mode
–
Networked Standby Mode (Wi-Fi)
Power consumption in networked standby –
Time needed for the equipment to automatically reach
networked standby mode
–
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- 6 -
01/2026
2026, .
INSTRUCTIONS AND INFORMATION ON DISPOSAL
OF USED PACKAGING MATERIAL
Dispose of used packaging material at the designated municipal waste
disposal site.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
Used electrical andelectronic products must not be disposed of in
ordinary municipal waste. To enable the proper disposal, renewal and
recycling of these products, deliver them to the designated collection
points. Alternatively, in some European Union states or other European
countries the products can be returned to the local retailer when buying
an equivalent new product. By disposing of this product correctly, you
help to conserve valuable natural resources and prevent any potential
adverse impact on the environment and human health that could result
from improper waste disposal. For more details, contact your local
authority or nearest collection point. Fines may be imposed for the
improper disposal of this type of waste as per national regulations.
For business entities in European Union States
If you wish to dispose of electrical and electronic equipment, please
request the necessary information from your retailer or supplier.
Disposal in other countries outside the European Union
To dispose of this product elsewhere, request the necessary information
on the correct disposal method from local authorities or your retailer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes to text and technical parameters are reserved.
