Digital Poster
HV55-AI19-HM
Important safety information
Before using this product, please read and follow all
safety information to ensure the best performance
and avoid dangerous or illegal situations.
Keep the device dry.
Do not swallow or bite the product or accessories
to avoid injury or product failure.
Safety warning
Please comply with the relevant laws and regulations, do not use
in the following environment.
!
The disconnecting device of this product is the power plug on
the wire assembly, and the socket equipped for use shall be
installed near the equipment, and shall be easy to operate,
and shall not be blocked by other objects.
In order to avoid interfering with the work of medical devices,
please stay away from medical devices such as pacemakers,
hearing AIDS, and cochlear implants.
Do not use it outdoors during thunderstorms to avoid lightning
strikes.
Do not use the device in a dusty, wet, dirty place or near a
magnetic field to avoid internal electrical faults.
To upgrade the system, please upgrade it through its
own system upgrade function or official after-sales
service. If you upgrade by other means, it may lead to
failure or data loss, and lead to the destruction of system
security capabilities, triggering security risks.
Do not place the product in an unstable position. Do not
lightly tap or shake the product's screen, as this may damage
the internal circuits or cause the product to tip over, resulting
in serious bodily injury or death.
Do not repair the product yourself. If this product or
any other part does not work properly, you should consult
after-sales service in time.
Basic parameter
Product Name: Digital Poster
Screen Size: 55-inch
RAM: 3G
ROM: 64G
Microphone: Yes
Loudspeaker: Yes
System: Android 11.0
Input: AC:100~240V
Weight: 27.48kg
CPU: Quad-Core Cortex-A73; Upto 1.5GHz
Manufacturer:
SUZHOU ALLIN INNOVATION TECHNOLOGY CO., LTD
Address:
No.15, Jintian Road, Industrial Park, Suzhou, China
Declaration:
Any part of this manual, including text, pictures, graphics, without
written permission, any unit or individual may not extract, copy,
translate, modify this manual in any way or in whole or in part. This
document is only used as a guide for the related products. It may
differ from the actual product.
Whole Machine Size: 1250.4mm*721.2mm*33mm
Screen Resolution: 2160*3840
Screen Display Ratio: 9:16
Product Model: HV55-AI19-HM
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
To maintain compliance with FCC's RF Exposure
guidelines, This equipment should be installed and
operated with minimum distance 20 cm between the
radiator and your body. Use only the supplied antenna.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Any changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
FCC Caution:
Warning:
-In a residential environment, running this device may cause
wireless interference.
-The product contains a coin cell battery, please keep it away from
children.
-When recycling the product, please note that button batteries
should not be discarded at will.
-Do not disassemble or attempt to replace the battery.
-Replacement of a BATTERY with an incorrect type that can defeat
a SAFEGUARD.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:
Risk of fire or explosion or defeat the safeguard of
equipment if the battery is replaced by an incorrect type.
Replace only with the same or equivalent type. Disposal
of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an
explosion. Leaving the battery in an extremely high
temperature and/or low air pressure surrounding
environment that can result in an explosion or the
leakage of flammable liquid or gas.
PRUDENCE:
Risque d’incendie ou d’explosion ou d’échec de la
protection si la batterie est remplacée par un type
incorrect. Remplacez-le uniquement par un type
identique ou équivalent. Disposition d’une batterie dans
un feu ou un four chaud, ou mécaniquement l’écrasement
ou la coupure d’une batterie, qui peut entraîner explosion.
Laisser la batterie à une température extrêmement élevée
température et/ou basse pression atmosphérique
environnantequi peut entraîner une explosion ou fuite de
liquide ou de gaz inflammable.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
NFC function: Yes
Vertical Installation
Slide Dow n
Wall mounted n ail
ST6*20m m screw locking position
M3*10mm s crew locking position
2、After installing and organizing
the power cord, align the machine
installation slot with the wall nail,
Slide down, installation is complete.
(Can be locked with M3*10 screws
for wall mounting)
1、After confirming the installation
(Can be locked with ST6 * 20mm
screws for wall mounting)
position, fix the wall hanging securely.
The installation position should be less
than 2 meters from the ground.
FCC ID:2BONP-HV55AI19HM
Contains FCC ID:2AJYU-8PYA007
Horizontal Installation
Sl
i
d
e R
ig
h
t
M3*10mm s crew locking position
Wall mounted n ail
2、After installing and organizing
the power cord, align the machine
installation slot with the wall nail,
Slide right, installation is complete.
(Can be locked with M3*10 screws
for wall mounting)
1、After confirming the installation
(Can be locked with ST6 * 20mm
screws for wall mounting)
position, fix the wall hanging securely.
The installation position should be less
than 2 meters from the ground.
ST6*20m m screw locking position
