Before using the product, please read this instruction manual carefully and
keep it for future reference.
Instruction manual
S�S
Bar Psi
Kpa
Kg/cm
2
Product accessories
Nozzle�
High-pressure air
inflation tube�
Charging
cable�
Storage bag�
Safety hammer�
Anti-scalding silicone�
Air needle�
Air nozzle�
Basic parameters
Product Model OATI-���M
Product Size
Rated Voltage
DC�.�V
��*��*���mm
Rated input
�V �A
Rated Power
��W
���g
��mm
��L/min
�.�-��.�bar/�-���psi
Bar、Psi、Kpa、kg/cm²
USB Type-C
�hours
USB-A
Product N.W.
Cylinder Inner
Diameter
Charge Flow
Charge Pressure
Range
Unit Display
Charging Interface
Charging Time
Output interface
Standard
Host, high pressure inflatable tube,Type-C charging cable,
multi-function nozzle ,Storage bag, Safety hammer,
Anti-scalding silicone
Bar Psi
Kpa
Kg/cm
2
SOS
�
�
�
�
�
��
��
��
��
�
�
�
�
��
��
Component description
� Nozzle adapter
�
Air tube interface
Air tube storage
compartment
Tire pressure display
Battery display
Light button (toggle)
Increase air pressure
Short press to toggle presets, hold down to toggle units
�
�
�
��
��
��
�
High-pressure air inflation tube
�
Light / SOS
Mode Selected
Heat vent
Unit display
Decrease air pressure
Hold down to turn on
( short press start and stop )
�
�
��
��
��
Host, high pressure inflatable tube,Type-C charging cable,
multi-function nozzle ,Storage bag, Safety hammer,
Anti-scalding silicone
�.Charging
�.Turn on and trun off
Turn on
Instruction manual
Please fully charge before using it for the first
time. Use the charging cable to connect the �V
USB adapter to charge the inflator.
The battery is displayed as three cells,and the
number of lit cells represents the remaining
power .
One bar: �% - ��%
Two bars: ��% - ��%
Three bars: ��% - ���%
For the longer battery life, charge fully every month
Tips
�.Power display
Hold down the power button for � seconds to turn
on. If left idle, it will turn off in � minutes.
If the inflation tube is pulled out, the tire inflator
will turn power down. Hold down the power
button to turn on again.
Inflating
Short press the power button, to start inflating.
Noise level: ��-�� decibels
Turn off
Hold down the power button for � seconds to
shut down. Automatic shut down will happen
after � minutes in an idle state.
SOS
Note: idle play for � minutes or standby for �� seconds, the machine automatically shut down.
�.Preset values are fine-tuned
�.Lighting
“＋”“－”to increase or decrease target tire pressure, each
press will increase or decrease by �.��Bar, �.�Psi,
�.��Kg/cm², and �Kpa. During inflation, the air pressure
cannot be adjusted.
(Note: each preset mode has their own
minimum and a maximum pressure)
Short press light button: turn on white light
Short press again : red flash ( flash interval �s )
Short press again : strobing red flash (( flash interval �.� s )
Press the light again to turn light off
�.Preset Modes
Mode switching
Mode
Default mode
Car mode:��Psi ��-��Psi
��-��Psi
��-��Psi
�-��Psi
Bicycle mode:��Psi
Motorcycle mode:��Psi
Ball mode:�Psi
Adjustable range
Short press mode button“ ”to toggle between different preset modes
on the display. Hold down the mode button before inflating to toggle
between bar, psi, Kpa, kg/cm²
Free mode: Free pressure mode: when there are no icons displayed on the
left side of the air pump screen, the preset pressure can be adjusted freely.
The previous settings will be saved.
Adjustable range: �-���psi/�.�-��.�bar
SOS
SOS
�.Detect air pressure
�.Can be used as a power bank
Note
This tire inflator can display the current air pressure of the tire, ball, or pool
inflatables that it is connected to.
The tire inflator can be used as a �V/�A power bank. Hold down the power
button to power on and start charging.
�. This product is not a toy, children are prohibited to use. Users are advised to be over ��
years of age .During the inflation process, please keep a safe distance between the
children and the inflator .
�. The product is built-in non-removable lithium battery, and it is forbidden to throw the
product into the fire or thrown away. The risk of fire, spontaneous combustion, or
explosions can occur if the Lithium battery is overheating, impacted or sumburged in
water. Please avoid exposure to high temperature.
�. The storage temperature of the product should not be lower than -��°C or ��°F
degrees or higher than ��°C or ���°F degrees, too cold or overheating will shorten the life
of the product, or damage the built-in battery.
�. Damage to the battery can occur if not in use for long periods of time, it is
recommended to charge at least once every three months.
�. The product built-in DC motor may generate electric sparks when it is inflating, do not
use it in a flammable and explosive environment.
�. If there is an abnormal noise or the temperature is too high when inflating, please shut
down immediately. Rest and try again. If problems persist please call customer service.
�. Do not leave when inflating, pay attention to any abnormalities and prevent the tire
from being overinflated.
�. Please use in a dry and clean environment, sediment and sand intrusion may lead to
product damage. The product is not waterproof, washing it will lead to damage and void
of warranty.
�. Before setting the inflation pressure value, please confirm the correct measurement
unit is selected, otherwise it may lead to a tire blowout accident.
Common unit conversion: � bar = ��.�psi= ���kpa = �.��kg/cm²
Tip:The illustrations of products, accessories, user interfaces, etc. in the manual are all
schematic diagrams and are for reference only. Due to product updates and upgrades,
there may be slight differences between the actual product and the schematic diagram,
please refer to the actual product.
