DongGuan ChuangJie Electronics G19-D Fast Wireless Charging Holder

Product's Documents

Below are documents related to this product, you can read online or download:
G19-D photo

User Manual

This is the main product document for model G19-D.

The file format is pdf, 1 pages, you can download this manual here .

background
Instructions
Fast Wireless Charging Holder
Parameters:
Type C charging interface
Please read the instructions carefully
before using
Fast charging with 25W output.
Custom made magnet array, precisely compatible for
iPhone 18/17/16/15/14/13/12 series phones.
360 degree rotation for your optimal viewing angle.
Cradleless design, easy to hold and remove the phone.
Features:
Package includes a high ecient Type C charging cable.
Product specication:
Instructions:
Charging Cable
Air vent mount
Magnetic charging head
φ65 mm
φ55 mm
Metal ring with
double side sticker
Instructions:
Work for most phones and cases
Note: The sticky metal ring does not stick well to textured,
leather or liquid silicone phone cases.
1. For iPhone 18/17/16/15/14/13/12 series case free or with
magsafe case, attach to magnetic mount directly without the
metal ring.
2. For iPhone 18/17/16/15/14/13/12 series with regular case or
for other phones,need to stick the metal ring to center of the
back of the case.
Magnetic charging head:
115-205KHZ(5W, 7.5W,10W),
360KHZ(15W/25W)
27542
25W
5V 3A 15V 3A
Voltage
Output
QIID
Charging frequency
1-3mm
Induction Distance
1. Insert the adjuster into ball
joint of air vent mount, insert
the ball into the socket at the
back of magnet head, turn
the adjuster to tighten.
2. Insert the hook into the car
air outlet vane and tighten
to lock. when you hear
'clatter' sounds, it means the
mount has been xed tightly.
Attentions:
1. Please use the product correctly according instructions.
4. Please do not put wireless charger close to cards with
magnetic stripes or chips (ID card,credit card etc.) to
avoid demagnetization
5. Please keep wireless charger at least 20 CM distance
away from implantable medical device (heart pacemaker,
Implantable cochlea etc.) to avoid potential interferences.
6. Please do safekeeping, do not let your kids treat wireless
charger as toy to avoid unwanted accidents.
The pictures only supplies the reference, please take the
actual product as the standard.
2. Please do not disassemble the product or throw it to re
and water, to avoid leakage that caused by electrical
short circuit.
3. Please do not use wireless charger in high temperature,
wet, corrosive environment, to avoid leakage that caused
by damaged circuit.
4. Put the phone on the
magnet head, adjust the
best viewing angle.
3. Connect the charging cable
to the charging interface.
FCC Statement
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
Any changes or modications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
QIID: 27542
FCC WARNING:This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The equipment complies with FCC Radiation exposure limit set
forth for an uncontrolled environment. The equipment should
be installed and operated with a minimum distance of 20cm
between the product and your body.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
(please refer to the gift box selected model as exact product)
32 mm

Specifications

DongGuan ChuangJie Electronics G19-D Questions and Answers

Questions and Answers

Related Products