Sencor SCOOTER S31 Scooter User Manual

SCOOTER S31

EN User Manual Electric scooter

CZ Uživatelská příručka Elektrická koloběžka

SK Používateľská príručka Elektrická kolobežka

HU Felhasználói kézikönyv Elektromos roller

PL Podręcznik użytkownika Hulajnoga elektryczna

2 EN

Revision 09/2025

Table of Contents

1. Package Contents and Scooter Description ............................................................3

1.1. Package contents ..................................................................................................3

1.2. Description of SCOOTER S31 ................................................................................3

2.1. Control Panel and Application ..............................................................................4

2.2. Multifunction button...............................................................................................5

2.3. Driving modes ........................................................................................................5

2.4. Starting Operating Mode ........................................................................................5

3. Assembling the electric scooter ...............................................................................7

4. Charging ...................................................................................................................8

5. Battery over-discharge protection ...........................................................................8

6. Folding and transport ..............................................................................................9

7. Riding the electric scooter ...................................................................................... 10

8. Safety instructions .................................................................................................11

9. Maintenance and adjustment ................................................................................12

10. Technical specifications .......................................................................................16

Package contents and scooter description

EN 3

Revision 09/2025

1. Package Contents and Scooter Description

1.1. Package contents

1x Electric SCOOTER S31

1x Charging adapter

1x Allen key

6x Handlebar mounting screws

1x User Manual

1x Tyre inflation adapter

4x side reflector

2x long spare screws for the footboard

2x short spare screws for the footboard

1.2. Description of SCOOTER S31

5 6

3 4

14 15 16

17 18

➊ Rear mechanical brake lever

➋ Bell

➌ Hook for securing in transport state

➍ Speed controller

➎ Left turn indicator

➏ Buttons (left and right turn indicators)

➐ On/Off/Multifunction button

➑ Display

➒ Right turn indicator

➓ Front light

Release lever for folding mechanism

Front suspension fork

Front wheel with inner tube, tyre for

inflation, and electric motor

Charging connector

Stand (lowest point of the scooter

body)

Footboard, battery compartment

Notch for securing the handlebar in

folded state

Rear LED light / brake light

Rear mechanical disc brake

Rear wheel with inner tube and tyre

for inflation

4 EN

Operation

Revision 09/2025

2. Operation

2.1. Control Panel and Application

➊ Current speed

➋ Indicator for connected device via Bluetooth

➌ Riding modes (ECO – Economy; D – Drive; S–

Sport)

➍ Active front light

➎ Walk – mode (reduced speed mode)

➏ Overheating indicator – triggered when the

scooter’stemperature exceeds 90°C

➐ Device error indicator – contact aservice centre

➑ Battery level indicator

➒ Multifunction button

Settings via the Mobile App



ϭ Nastavenípomocí mobilní aplikace



Tuto elektrickou koloběžku je možné ŶĂƐƚĂǀŝƚprostřednictvím aplikace SENCOR HOME.



• Stáhněte si aplikaci do svého chytrého mobilního telefonu, zaregistrujte se a ŶĂƐƚĂǀƚĞ

elektrickou koloběžku. Pokud již aplikaci SENCOR HOME máte nainstalovanou, přidejte si do

ní elektrickou koloběžku.



• Návodjak zacházet saplikacínaleznete ke stažení na webu ŚƚƚƉƐǁǁǁƐĞŶĐŽƌĐŽŵ

ǀsekci KOLOBĚŽKY

• Reset spárování saplikací SENCOR HOME se provádí vzapnutém stavu elektrické koloběžky a

stiskem zapínacího tlačítka 8x za sebou. Úspěšné vyresetování bude oznámeno akustickým

tónem. 



This electric scooter can be set up via the SENCOR HOME app.

• Download the app to your smartphone, register and set up your electric scooter.

If you already have the SENCOR HOME app installed, add your electric scooter to

it.



ϭ Nastavenípomocí mobilní aplikace



Tuto elektrickou koloběžku je možné ŶĂƐƚĂǀŝƚprostřednictvím aplikace SENCOR HOME.



• Stáhněte si aplikaci do svého chytrého mobilního telefonu, zaregistrujte se a ŶĂƐƚĂǀƚĞ

elektrickou koloběžku. Pokud již aplikaci SENCOR HOME máte nainstalovanou, přidejte si do

ní elektrickou koloběžku.



• Návodjak zacházet saplikacínaleznete ke stažení na webu ŚƚƚƉƐǁǁǁƐĞŶĐŽƌĐŽŵ

ǀsekci KOLOBĚŽKY

• Reset spárování saplikací SENCOR HOME se provádí vzapnutém stavu elektrické koloběžky a

stiskem zapínacího tlačítka 8x za sebou. Úspěšné vyresetování bude oznámeno akustickým

tónem. 



Operation

EN 5

Revision 09/2025

• Instructions on how to use the application can be downloaded from https://www.

sencor.com/ in the SCOOTERS section

• Reset pairing with the SENCOR HOME app is done with the electric scooter

switched on and the power button pressed 8 times in succession. Abeep will

sound to indicate asuccessful reset.

2.2. Multifunction button

CAUTION:

Always configure riding settings before beginning your ride.

1) When the scooter is powered off, press and hold the multifunction button to turn

it on.

2) When the scooter is powered on, press and hold the multifunction button for 2

seconds to turn it off.

3) When the scooter is powered on, ashort press of the multifunction button turns

the LED front light on/off.

4) When the scooter is powered on, aquick double-press of the multifunction button

switches between riding modes.

5) When the scooter is powered on, aquick triple-press of the multifunction button

toggles the speed units on the display (km/h or mph).

2.3. Driving modes

Switch between modes by double-clicking the multi-function button.

Walk up to 6 km/h

Eco up to 10 km/h

Drive up to 20 km/h

Sport up to 25 km/h

2.4. Starting Operating Mode

1) Switch on the electric scooter.

2) Fully press and hold down the speed control until 16 shows on the display.

3) Keep holding down the speed control and simultaneously press the brake lever.

4) Release the brake lever.

5) This will switch to the last set mode.

6 EN

Operation

Revision 09/2025

CAUTION:

Always activate operating mode when the electric scooter is stationary.

Start the scooter by following the instructions step by step and slowly.

Controlling the turn lights

• The turn indicator control is located on the left side of the handlebars, see ➏

on the main diagram. Once activated, the light will turn off automatically after

awhile or can be turned off manually by pressing the same button.

• Pressing the right button activates the turn light on the right end of the

handlebars.

• Pressing the left button activates the turn light on the left end of the handlebars.

Replacing the turn lights

Take extra care when storing and putting away the electric scooter to avoid dropping

it on objects that could damage the turn lights at the end of the handlebars. If aturn

light gets damaged, new lights can be purchased as aseparate part. To replace

aturn light, loosen the 1.5mm Allen bolt located underneath the handlebars. Pull

the turn light out and disconnect it at the connector. Connect the new turn light

and cover the connector with the new protective tape. Insert the turn light into the

handlebar tube and gently tighten the 1.5mm Allen bolt.

Assembling the electric scooter

EN 7

Revision 09/2025

3. Assembling the electric scooter

1. Straighten the handlebar rod and secure it firmly with the lock lever.

2. Make sure that the control unit connectors are connected to the control panel.

The wires must be properly connected to prevent them from coming loose later

on.

3. Carefully connect the handlebar with the handlebar tube. Take care no to dam-

age the connecting wire when inserting it into the handlebar tube. The LED light

must point in the direction of travel.

8 EN

Charging

Revision 09/2025

4. Screw the handlebar and the handlebar tube together. Insert two Allen screws

Afrom the left side andtwo Allen screws B from the opposite side, as shown

in the diagram. Tighten the screws firmly. Regularly check that the screws have

not come loose during use.

5. Switch on the electric scooter.

4. Charging

Before starting your ride, ensure the battery is fully charged. Switch on the control

panel and check the battery level.

Charge the scooter with the supplied charging adapter. First, uncover the rubber cap

of the charging connector on the scooter and connect the charging adapter. Then

connect the adapter to your power outlet. When the charging process is finished and

the charging adapter is disconnected, cover the charging connector opening again

with the rubber cap. Regularly check that the protective cap covers the charging

connector when not charging.

The charging adapter includes aindicator displaying two states.

1. Red LED: Indicates that the battery is charging

2. Green LED: Indicates that the battery is fully charged

CAUTION:

Only use the original accessories provided in the package for charg-

ing. If the battery life becomes very short, it is asign that the bat-

tery'slifespan has been consumed. It is recommended to have the

battery replaced at an authorised service centre.

Recommendation:

If the unit is not to be used for an extended period of time, we recommend to fully

charge the battery once every two to three months. We do not recommend storing

the unit with aflat battery to prevent irreparable damage to the battery (loss of

capacity).

5. Battery over-discharge protection

Each component of the electric scooter is protected against damage caused by oper-

ational overload and lower battery charging level.

1. If the scooter is subject to ahigher load for example due to frequent riding uphill

or riding up asteep hill, the control unit/battery overheating protection will be

enabled, limiting the power for anecessary period of time. The speed will be

reduced to amaximum of 15 km/h.

Folding and transport

EN 9

Revision 09/2025

2. If the battery level drops below 30%, the maximum scooter speed will be limited

to max. 15 km/h. If the battery level drops below 25%, the maximum speed will

be limited to max. 10 km/h.

CAUTION:

Do not repair and/or tamper with the electric scooter (SCOOTER S31)

protection mechanisms. This will help prevent damage to individual

components of the scooter.

6. Folding and transport

1. Ensure the electric scooter is turned off. Hold the scooter steady, unlock the

folding mechanism release lever at the bottom of the handlebar tube, and flip

the lever forward in the direction of travel.

CZ 9

Skládání a transport

2. Sklopte uvolněnou řídítkovou trubku směrem k zadnímu blatníku, kde ji zajistíte

pomocí háku na řídítkách a zářezu na zadním blatníku. Správné složení do

transportního stavu

3. Pro přenášení uchopte Scooter One 2020 za řídítkovou trubku. Pro pohodlnější

transport doporučujeme držet řídítkovou trubku v třetině její délky, na straně blíže

k přednímu kolu.

Sencor Scooter One EN CZ SK PL HU.indb 9Sencor Scooter One EN CZ SK PL HU.indb 9 16.08.2020 21:05:2416.08.2020 21:05:24

2. Fold the loosened handlebar tube towards the rear mudguard, securing it using

the hook ➌ on the handlebars and the notch

on the rear mudguard.

3. To carry the scooter, hold it by the handlebar tube. To make the scooter easier to

carry, we recommend holding the handlebar tube one third of the way along on

the side near the front wheel.

CZ 9

Skládání a transport

2. Sklopte uvolněnou řídítkovou trubku směrem k zadnímu blatníku, kde ji zajistíte

pomocí háku na řídítkách a zářezu na zadním blatníku. Správné složení do

transportního stavu

3. Pro přenášení uchopte Scooter One 2020 za řídítkovou trubku. Pro pohodlnější

transport doporučujeme držet řídítkovou trubku v třetině její délky, na straně blíže

k přednímu kolu.

Sencor Scooter One EN CZ SK PL HU.indb 9Sencor Scooter One EN CZ SK PL HU.indb 9 16.08.2020 21:05:2416.08.2020 21:05:24

10 EN

Riding the electric scooter

Revision 09/2025

7. Riding the electric scooter

CAUTION:

• Before each ride, always put on ahelmet and protectors to prevent

injury.

• Before each ride, always check that the mechanical brake is fully

functional.

1. Place one foot on the scooter footboard and gently push off with the other foot.

CAUTION:

Always push off with your foot on the opposite side to the stand

10 CZ

Řízení Scooter One 2020

7. Řízení Scooter One 2020

UPOZORNĚNÍ:

• Před každou jízdou použijte helmu a chrániče, abyste předešli zranění v

případě pádu.

• Před každou jízdou zkontrolujte plnou funkčnost mechanické brzdy.

1. Položte jednu nohu na nášlapnou plochu koloběžky a druhou nohou se lehce

odražte od země.

2. Jakmile koloběžku uvedete v pohyb, zmáčkněte ovládací páčku rychlosti, aby se

spustil motor. Jakmile se koloběžka rozjede pomocí vlastní síly, položte i druhou

nohu na plochu koloběžky.

Poznámka:

Spuštění motoru a rychlost koloběžky lze ovládat po dosažení rychlosti min. 5

km/h.

Sencor Scooter One EN CZ SK PL HU.indb 10Sencor Scooter One EN CZ SK PL HU.indb 10 16.08.2020 21:05:2416.08.2020 21:05:24

2. Once the scooter is in motion, press the speed control lever ➍ to activate the

motor. When the scooter starts moving under its own power, place the other foot

on the footboard .

Note:

The motor will start and the scooter'sspeed can be controlled once it reaches

aminimum speed of 5 km/h.

10 CZ

Řízení Scooter One 2020

7. Řízení Scooter One 2020

UPOZORNĚNÍ:

• Před každou jízdou použijte helmu a chrániče, abyste předešli zranění v

případě pádu.

• Před každou jízdou zkontrolujte plnou funkčnost mechanické brzdy.

1. Položte jednu nohu na nášlapnou plochu koloběžky a druhou nohou se lehce

odražte od země.

2. Jakmile koloběžku uvedete v pohyb, zmáčkněte ovládací páčku rychlosti, aby se

spustil motor. Jakmile se koloběžka rozjede pomocí vlastní síly, položte i druhou

nohu na plochu koloběžky.

Poznámka:

Spuštění motoru a rychlost koloběžky lze ovládat po dosažení rychlosti min. 5

km/h.

Sencor Scooter One EN CZ SK PL HU.indb 10Sencor Scooter One EN CZ SK PL HU.indb 10 16.08.2020 21:05:2416.08.2020 21:05:24

Safety instructions

EN 11

Revision 09/2025

3. Stopping is essential for safe driving. First, release the speed controller ➍ and

then press the mechanical brake ➊ located on the left side of the handlebars.

4. Try the first turns slowly and on aflat surface. To turn, shift your centre of gravity

slightly. Gently lean in the direction you want to go and slowly turn the handle-

bars.

8. Safety instructions

This electric scooter is designed for fun and recreational use. It is not ameans of

transport. Be considerate of others in both private and public areas, follow the in-

structions below as well as local traffic regulations.

When meeting pedestrians, pay close attention to your ride and make sure pedestri-

ans are aware of

your presence. If you are outside their angle of view, ring the bell, slow down

and overtake (in right-hand traffic, overtake from the left).

Faster speeds automatically mean alonger braking time. Keep at asafe speed in

case you unexpectedly need to stop, and keep asafe distance from others. Even on

aflat surface, you may encounter situations or terrain that cause you to lose bal-

ance, skid or other unexpected situations that can cause you to fall. Always pay close

attention when riding.

Check the mechanical brake, battery charge status, wear of components and wheels

before each ride. If any parts are loose or you hear an unusual noise, carry out

athorough check and contact an authorised service centre if necessary.

Neither the manufacturer nor the distributor are liable for any financial damages,

injuries, accidents, legal disputes or conflicts resulting from failure to observe the

safety instructions.

• Do not ride in the rain and avoid slippery surfaces.

• If you encounter an obstacle on your way, stop and carry the scooter over the

obstacle.

• Exercise caution when passing through low ceilinged areas.

• Do not accelerate downhill and always brake well in advance.

If you encounter asteep descent (e.g. asteep hill), dismount and walk with your

scooter.

• Do not add speed while pushing the scooter.

• Always avoid obstacles.

• Avoid carrying heavy luggage on the handlebar.

• Always keep both feet on the scooter footboard while riding.

• Use the scooter only in designated areas. Observe the local regulations of the

regions, parks, cities and states you are riding in.

• Do not turn sharply at high speeds.

• Do not ride through puddles, water or in rain.

• Do not ride with another person, even achild.

• Do not step on the mudguards.

12 EN

Maintenance and adjustment

Revision 09/2025

• Do not touch the brake components.

• Always hold on to the handlebars.

• Do not try to ride up the stairs, down the stairs or jump with your scooter.

• Remember that the stand is the scooter'slowest point. Take care to prevent it

from catching on elevated surfaces while riding.

9. Maintenance and adjustment

Regular maintenance and correct adjustment of all parts of the electric scooter

prolongs its lifespan. Clean the individual components of the electric scooter with

adamp cloth and apply apreservation oil (excluding brake discs and pads).

Before each ride, check that all removable parts are tightly attached. If any screws,

Allen screws, or nuts are loose, tighten them with the appropriate tool.

The brake mechanism must be adjusted before the first ride. Contact aspecialised

provider (e.g. abike service) to have it adjusted properly. Adjustments cannot be

made under warranty or post-warranty service at the manufacturer or distributor.

CAUTION:

Never use ahigh-pressure washer on the electric scooter.

Adjusting the brake – If the brakes are too tight or too loose, use a4 mm Allen key

to loosen the brake mechanism screw (counterclockwise) and adjust the brake cable

length as needed. Then tighten the screw firmly. Further fine-tune the brake cable

tension using the nut on the mechanical brake mounted on the handlebars. Regu-

larly inspect the brake pads for wear and replace them as necessary. Brake pads are

consumable parts that degrade with use. Keep the entire braking system clean and

avoid greasy deposits on the brake disc and pads.

12 CZ

Údržba a seřízení

• Neprojíždějte kalužemi, vodou a nejezděte v dešti.

• Nejezděte ve dvou ani v případě dětí.

• Nestoupejte na blatníky.

• Nedotýkejte se brzdových komponentů.

• Vždy se držte řídítek.

• Nesnažte se jezdit do schodů, ze schodů ani skákat s koloběžkou.

9. Údržba a seřízení

Před první jízdou je nutné provést seřízení brzdového mechanismu. Pro správné

seřízení se obraťte na specializovaného poskytovatele (např. cykloservis). Seřízení

nelze provádět v rámci záručního ani pozáručního servisu u výrobce ani distributora.

V případě příliš utažených nebo příliš povolených brzd použijte 4mm imbusový klíč a

uvolněte šroub brzdového mechanismu proti směru hodinových ručiček a upravte délku

brzdového lanka. Poté šroub pevně utáhněte. Pro doladění upravte napětí brzdového

lanka matkou u mechanické brzdy upevněné na řídítkách.

V transportním stavu je v kloubu řídítkové trubky přístupný šroub (4mm imbus) pro

utažení jejího upevnění.

Sencor Scooter One EN CZ SK PL HU.indb 12Sencor Scooter One EN CZ SK PL HU.indb 12 16.08.2020 21:05:2516.08.2020 21:05:25

Handlebar Joint Adjustment – When in the folded position, a4 mm Allen screw C is

accessible on the handlebar joint for tightening its attachment. Before tightening the

Allen screw in the handlebar tube joint, first loosen the screws on the clamp (indicat-

ed by arrows in diagram B). Tighten the joint fitting gently to ensure that the steer-

ing is not rigid and that there is as little slack in the joint fitting as possible. After

adjustment, align the handlebars and securely tighten the screws B. Whenever the

steering gets looser after riding, tighten the components following this procedure.

Maintenance and adjustment

EN 13

Revision 09/2025

A B C

Adjusting the folding mechanism lever - if the folding mechanism becomes loose,

it needs adjusting. The adjustment screw fits into the folding mechanism lever and is

located at the bottom of the handlebar tube. Fold the handlebars into the transport

position and eliminate the play by loosening the Allen screw (turn counterclock-

wise). Loosen the screw gradually and repeatedly test unfolding the scooter until the

lever'slocking mechanism is firm enough. Never loosen the screw to the extent that

the folding mechanism lever can only be locked with excessive force.

Suspension - the scooter is equipped with front suspension that is optimally preset

from the factory and cannot be changed.

Keep the sliders and scraper shaft seals of the front suspension fork clean and dry.

Take care to avoid excessive wear and damage to the glider surface. Use adamp-

ened cloth for cleaning. After wiping off the dirt, use preservative oil to wipe the

gliders. For long life we recommend cleaning and preserving the front gliders after

every ride. In the lower right part of the suspension fork there are the motor supply

wires. Take extra care when riding and transporting your electric scooter to avoid

mechanical damage to the supply wires.

A– glider

B – scraper shaft seal

C – lower part of suspension fork

D – power supply lead

14 EN

Revision 09/2025

Maintenance and adjustment

Wheel and Tyre Inspection – The wheels of the electric scooter are inflatable and

equipped with inner tubes. Regularly check the condition of the tyres. If the tyres

show damage or excessive wear from use, replace them immediately.

CAUTION:

The correct tyre size and pattern prescribed by the manufacturer must

always be observed. Do not attempt to change the tyres without profes-

sional assistance.

Before each ride, check the air pressure in the tyres. The air pressure must be be-

tween 2.2 and 2.4 bar. If the tyre pressure is lower, use apump with aSchrader valve

fitting to inflate it as necessary. If the pressure is higher, deflate it to the recom-

mended level.

Removing the front wheel

List of tools:

18 mm wrench

Remove the plastic nut covers. Use an 18 mm spanner to loosen the nuts B of the

front wheel on the suspension fork. Disconnect the wires Aconnected to the motor

on the right side of the suspension fork.

Then pull the wheel down and out C.

For reassembly, follow the reverse order, ensuring the wheel is reassembled as it

was before disassembly.

CAUTION:

Perform all tasks carefully to avoid damaging the individual parts.

When assembling, ensure that all parts are properly in place and that

all connecting nuts and screws are securely tightened. Exercise extra

caution when handling the front wheel near the motor wire connection

area. The motor wire cannot be disconnected. If you are unsure about

assembly or disassembly, contact aspecialised service centre. The

replacement of tyres and inner tubes is not covered under warranty

repair.

* Use only cleaning agents that do not corrode the materials used.

Maintenance and adjustment

EN 15

Revision 09/2025

Maintenance and adjustment

Removing the rear wheel

List of tools:

4 mm Allen key

5 mm Allen key

hair dryer

Use ahair dryer to heat and peel off the reflector A. Unscrew the Allen screws B

and remove the plastic covers of the rear wheel on both sides. Unscrew the Allen

screw C from both sides of the rear wheel and pull the wheel backward D.

CAUTION:

Perform all tasks carefully to avoid damaging the individual parts.

When assembling, pay attention to precision and ensure that all con-

necting screws are securely tightened. If you are unsure about assem-

bly or disassembly, contact aspecialised service centre. The replace-

ment of tyres and inner tubes is not covered under warranty repair.

16 EN

Technical specifications

Revision 09/2025

10. Technical specifications

SCOOTER S31

Key features

Engine power 350 W

Maximum speed up to 25 km/h

Travel range up to 25 km

SENCOR SCOOTER app available at Google Play and APP Store

Front and rear LED light

LED display (mode, speed, battery, lighting, Bluetooth)

Turn signal lights

Drive

Engine power 350 W

Speed:

- SPORT mode up to 25 km/h

- DRIVE mode up to 20 km/h

- ECO mode up to 10 km/h

- WALK mode up to 6 km/h

Range up to 25 km at aweight of 70 kg

Cruise control

Maximum pitch angle up to 15°

Wheels

10-inch front and rear inflatable tyres

Dual braking system - electrical and mechanical

Disc brake

SENCOR HOME App

Available at Apple App Store and Google Play

Scooter locked using the app

Bluetooth 5.0

Technical specifications

Maximum load: 120 kg

Dimensions: 107 x 49 x 120 cm (unfolded)

Dimensions: 107 x 49 x 53 cm (folded)

Weight: 13.5 kg

Working temperature: 0 to 40 °C

Storage temperature: 0 to 45 °C

Noise level < 70 dB(A)

Charging adapter

Input voltage: 100–240 VAC 50/60 Hz

Input current: 1.5 A

Output voltage: 42 V

Connector: Φ 5.5 x 10 mm

Battery

Capacity: 270 Wh – 7.5 Ah/36 VLi-ion

Charging time: max. 6 hours

Protection against: short circuit, overvoltage, overcharging, overheating

Battery discharge protection

Technical specifications

EN 17

Revision 09/2025

Charging adapter Value and Accuracy Unit

Manufacturer’sname or

trademark, company ID and

address

“Dongguan Green Power One Co., Ltd

No.26, Hongyun Street, Chonghe

Village, Qingxi Town,

Dongguan City, Guangdong, P. R.

China”

Model identification code GA20-4201500T -

Input voltage

100–240 V

Input frequency 50/60 Hz

Output voltage 42.0 V

Output current 1.5 A

Output power 63.0 W

Average efficiency in active

mode

89.61 %

Low load efficiency (10%) / %

No load power consumption 0.19 W

Bluetooth

Version 5.0

Maximum transmitter power 100 mW at 2.4 GHz – 2.4835 GHz

Noise Emissions

The weighted sound pressure level of amoving vehicle is less than 70 dB (A).

Technical specifications

18 EN

Revision 09/2025

Warranty conditions

Warranty card is not apart of the device packaging.

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty

is limited to the following conditions. Warranty is referred only to the customer goods using for common

domestic use. The claim for service can be applied either at dealer’sshop where the product was bought, or

at below mentioned authorized service shops. The end-user is obligated to set up aclaim immediately when

the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify

the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted.

In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim

application till the date of taking over the product by end-user, or the date the end-user is obligated to take it

over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed

following documents: receipt, certiﬁcate of warranty, certiﬁcate of installation.

This warranty is void especially if apply as follows:

 Defects which were put on sale.

 Wear-out or damage caused by common use.

 The product was damaged by unprofessional or wrong installation, used in contrary to the applicable

instruction manual, used in contrary to legal enactment and common process of use or used for another

purpose which has been designed for.

 The product was damaged by uncared-for or insufﬁcient maintenance.

 The product was damaged by dirt, accident of force majeure (natural disaster, ﬁre, and ﬂood).

 Defects on functionality caused by low duality of signal, electromagnetic ﬁeld interference etc.

 The product was mechanically damaged (e.g. broken button, fall).

 Damage caused by use of unsuitable media, ﬁllings, expendable supplies (batteries) or by unsuitable

working conditions (e.g. high temperatures, high humidity, quakes).

 Repair, modiﬁcation or other failure action to the product by unauthorized person.

 End-user did not prove enough his right to claim (time and place of purchase).

 Data on presented documents differs from data on products.

 Cases when the claiming product cannot be indentiﬁed according to the presented documents (e.g. the

serial number or the warranty seal has been damaged).

Manufacturer:

FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic

info@sencor.com

Authorized service centers:

Visit www.sencor.com for detailed information about authorized service centers.

The original version of the instructions is in the Czech language, other language versions are made by the

appropriate translation.

INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED PACKAGING MATERIAL

Take the packaging material to adesignated municipal waste facility.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric

or electronic products must not be added to standard municipal waste. For

proper disposal and recycling, take these products to designated collection

points. Alternatively, in some European Union states or other European

countries the products can be returned to the local retailer when buying an

equivalent new product. Correct disposal of this product helps save valua-

ble natural resources and prevents damage to the environment caused by

improper waste disposal. Ask your local authorities or collection facility for

more details. Fines may be imposed for the improper disposal of this type

of waste as per national regulations.

For business entities in European Union States

If you want to dispose of electric or electronic devices, ask your retailer or

supplier for the necessary information.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you wish to dispose of this

product, request the necessary information about the correct disposal

method from the local council or from your retailer.

This product meets all the basic requirements of EU directives that apply

toit.

Changes in the text, design and technical specifications may be made without prior

notice and we reserve the right to make such changes.

CZ 15

Technické parametry

POKYNY AINFORMACE ONAKLÁDÁNÍ SPOUŽITÝM OBALEM

Použitý obalový materiál odložte na místo určené obcí kukládání odpadu.

LIKVIDACE POUŽITÝCH ELEKTRICKÝCH AELEKTRONICKÝCH

ZAŘÍZENÍ

Tento symbol na produktech anebo vprůvodních dokumentech znamená,

že použité elektrické aelektronické výrobky nesmí být přidány do běžného

komunálního odpadu. Ke správné likvidaci, obnově arecyklaci předejte tyto

výrobky na určená sběrná místa. Alternativně vněkterých zemích Evropské

unie nebo jiných evropských zemích můžete vrátit své výrobky místnímu

prodejci při koupi ekvivalentního nového produktu. Správnou likvidací tohoto

produktu pomůžete zachovat cenné přírodní zdroje anapomáháte prevenci

potenciálních negativních dopadů na životní prostředí alidské zdraví, což

by mohly být důsledky nesprávné likvidace odpadů. Další podrobnosti si

vyžádejte od místního úřadu nebo nejbližšího sběrného místa. Při nesprávné

likvidaci tohoto druhu odpadu mohou být vsouladu snárodními předpisy

uděleny pokuty.

Pro podnikové subjekty vzemích Evropské unie

Chcete-li likvidovat elektrická aelektronická zařízení, vyžádejte si potřebné

informace od svého prodejce nebo dodavatele.

Likvidace vostatních zemích mimo Evropskou unii

Tento symbol je platný vEvropské unii. Chcete-li tento výrobek zlikvidovat,

vyžádejte si potřebné informace osprávném způsobu likvidace od místních

úřadů nebo od svého prodejce.

Tímto FAST CR a.s. prohlašuje, že typ rádiového zařízení Scooter One 2020

je vsouladu se směrnicí 2014/53/EU.

Změny vtextu, designu atechnických speciﬁkací se mohou měnit bez předchozího

upozornění avyhrazujeme si právo na jejich změnu.

Sencor Scooter One EN CZ SK PL HU.indb 15Sencor Scooter One EN CZ SK PL HU.indb 15 16.08.2020 21:05:2516.08.2020 21:05:25