Instruction manual
Before using the product, please read this instruction manual carefully
and keep it for future reference.
Product accessories
Basic parameters
� meters cigarette
lighter�
Product Model OATI-���L
��.�*��.�*���mmProduct Size
Rated Voltage
Rated input
Rated Power
Product N.W.
Cylinder Inner
Diameter
Charge Flow
Charge Pressure
Range
Unit Display
Charging Interface
Charging Time
Output interface
Standard
DC��.�V
�V �A
��W
���g
��mm
��L/min
�.�-��.�bar/�-���psi
Bar、Psi、Kpa、kg/cm²
USB Type-C
�-� hours
USB-A
Host, high pressure inflatable tube,Type-C charging
cable, multi-function nozzle,Cigarette lighter ,
Storage bag, Safety hammer, Anti-scalding silicone
Presta valve� High-pressure air
inflation tube�
Charging
cable�
Storage bag� Safety hammer�
Anti-scalding
silicone�
Air needle�
Air nozzle�
Component description
Unscrew the air hose
counterclockwise
Screw the air hose
clockwise
Light
Light button, Strobe,
SOS
Decrease
tire pressure
Mode / unit button
Unit display
Current tire pressure
Target tire pressure
Air hose interface
Mode selected
Battery display
*Product front*
Hold down on/off
press to
start/stop
Increase tire pressure
( Short press to switch
the inflatable mode.
Long press to switch
the unit )
Bar Psi
Kpa
Kg/cm
2
Cigarette lighter
interface
Type-C Charging
input port
Safety hammer
storage
Multifunctional
air nozzle storage
USB Charging
output port
*Bottom of the product*
Instructions for use
�.Screw the air hose clockwise �.Connect the air hose to the tire
screwing in clockwise
�.Hold down the power button for
� seconds to turn on
�
�.Short press mode button“ ”to
toggle between presets
- Hold down for � seconds ' ' to
toggle between units
�
�.“＋”“－”to increase or decrease
target tire pressure, each press will
increase or decrease by �.��Bar,
�.�Psi, �.��Kg/cm², and �Kpa.
(Note: each preset mode has their own
minimum and a maximum pressure)
�
�.Set the preset tire pressure,
short press " ", the machine
will start inflating, when it
reaches the target tire pressure,
it will automatically stop.
�
Psi
� Modes to switch
Short press the mode key " " to switch the following five pressure
preset modes on the display screen. Hold down the mode button to
switch“Bar、Psi、Kpa、kg/cm² ”to select the correct air pressure unit.
Free pressure mode: when there are no icons displayed on the left side of
the air pump screen, the preset pressure can be adjusted freely. The
previous settings will be saved.
Adjustable range: �-���psi/�.�-��.�bar.
Note: leaving it idle for � minutes or standby for �� seconds, the
machine automatically shut down.
�.Inflating steps
� �
�.Lighting
�.USB charging
�.The use of cigarette lighter
Short press light button : turn on
white light
Short press again : red flash ( flash
interval �.�s )
Short press again : strobe red
flashing (( flash interval �.� s )
Press the light again to turn light off.
One bar: �% - ��%
Two bars： ��% - ��%
Three bars: ��% - ���%
Please fully charge before using it for
the first time. Use the charging cable
to connect the �V USB adapter to
charge the inflator.
When the battery is low, you can use a
cigarette lighter in your car to charge.
Note: Be sure your vehicle is turned
on to charge the tire inflator
properly.
For the longer battery life,
charge fully every month
Tips:
Mode
Default mode
Car mode:��Psi ��-��Psi
��-��Psi
��-��Psi
�-��Psi
Bicycle mode:��Psi
Motorcycle mode:��Psi
Ball mode:�Psi
Adjustable range
�.The use of safty hammer
�.As a power bank
�. Air pressure sensor
In an emergency, take out the safety
hammer from the bottom and screw
in where the air hose would be to
shatter your window for escape.
This inflator can be used as a �V/�A power bank.
This tire inflator can display the current air pressure of the tire, ball, or
pool inflatables that it is connected to.
�. This product is not a toy, children are prohibited to use. Users are advised to be
over �� years of age. During the inflation process, please keep a safe distance
between the children and the inflator.
�. The product is built-in non-removable lithium battery, and it is forbidden to
throw the product into the fire or thrown away. The risk of fire, spontaneous
combustion, or explosions can occur if the Lithium battery is overheating, impacted
or sumburged in water. Please avoid exposure to high temperature.
�. The storage temperature of the product should not be lower than -��°C or ��°F
degrees or higher than ��°C or ���°F degrees, too cold or overheating will shorten
the life of the product, or damage the built-in battery.
�. Damage to the battery can occur if not in use for long periods of time, it is
recommended to charge at least once every three months.
�. The product built-in DC motor may generate electric sparks when it is inflating,
do not use it in a flammable and explosive environment.
�. If there is an abnormal noise or the temperature is too high when inflating,
please shut down immediately. Rest and try again. If problems persist please call
customer service.
�. Do not leave when inflating, pay attention to any abnormalities and prevent the
tire from being overinflated.
�. Please use in a dry and clean environment, sediment and sand intrusion may
lead to product damage. The product is not waterproof, washing it will lead to
damage and void of warranty.
�. Before setting the inflation pressure value, please confirm the correct
measurement unit is selected, otherwise it may lead to a tire blowout accident.
Common unit conversion: � bar = ��.�psi= ���kpa = �.��kg/cm²
Note
