蓝悦F26亚马逊说明书 128G双铜+风琴折360*140MM
Manual Lanyard
Pair name F26
Charging Time 2 Hours
Transmission Distance 10m
F26 Wireless Speaker
1.Turn on the Speaker: Long press the button, The sound will
be heard.
2.Pair "F26": Open the wireless device setting,search the
pair name "F26" to connect.
3.Success Display: The sound is heard
*Low Battery Warning:When the volume is below 10%, the
speaker will automatically lower the volume.
1.Turn on/off 2.Pair with you device
F26
1. Turn on two F26 speakers.
2. Double click the power button on one of the speakers
into TWS mode.
3. TWS will finish pair after "beep".
4. Click the device name" F26 "to pair on.
User Manual
F26
Wireless
1
2
3
4
5 6
①
②
③
④
⑤
⑥
: Long press
S : Short press
:
Double click
P : Short press
: Short press
: Long press
: Long press
lights: Double-click
Charging Port: TYPE-C
Charging:
Red light is on
Fully charging:
Light goes out
TF Card Slot
Wireless
Decrease the Volume:Short press
Previous the Song:Long press
Increase Volume: Short press
Next Song: Long press
*Auto Shutdown: No connection BT/Pause status,no music
oroperation, auto shutdown after 30min.
Click 2X
» FCC STATEMENT
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Part 15 Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note on Interference (Class B Digital Device – Residential Use)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment.This device is intended for portable use and
can be operated without maintaining a minimum distance between the
antenna and the human body during normal use.
