LED WATERPROOF LAMP FITTING
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future reference. If you
have any another query, please contact our dealer or local vendor from whom you have purchased the
product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date
of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear
and tear. The company gives no warranty against damage to any surface due to incorrect removal and
installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for
24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL
SKU
INPUT VOLTAGE
BEAM ANGLE
LIFE SPAN
ON/OFF CYCLE
MATERIAL
CLIP NUMBERS
DIMENSION
VT-120001
24485
AC:220-240V, 50Hz
120°
10,000 Hours
20,000 Times
PC + ABS
10
1276x62x56mm
INSTRUCTION MANUAL
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.
[Tube not included]
WATTS
1x20W (Max)
VT-120002
24486
AC:220-240V, 50Hz
120°
10,000 Hours
20,000 Times
PC + ABS
10
1276x91x56mm
2x20W (Max)
VT-121001
24487
AC:220-240V, 50Hz
120°
10,000 Hours
20,000 Times
PC + ABS
10
1576x62x56mm
1x22W (Max)
VT-121002
24488
AC:220-240V, 50Hz
120°
10,000 Hours
20,000 Times
PC + ABS
10
1576x91x56mm
2x22W (Max)
L
H
W
H
W
WARNING
1. Please make sure to turn o the power before starting the installation.
2. Installation should only be done by a certified electrician.
3. If the external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid a hazard.
4. Terminal block not included.
5. Must be connected to waterproof terminal box.
6. For indoor use and outdoor use
INSTALLATION INSTRUCTIONS
BLUE
BROWN
L
N
WIRING DIAGRAM
NOTICE
• Starter not required • Direct Installation
Unlock the clips and open the diuser to replace or install the tubes.
4x
4x
2x
1x
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
LAMP REPLACEMENT INSTRUCTION
Model
xxx
xx
920
±35
1220
±35
1 2
3 4
5 6
VT-120001, VT-120002
VT-121001, VT-121002
1.Turn o the power supply before starting the
installation.
2. Release the lampshade clips and carefully open
the lampshade.
3. Pass the cable through the waterproof connector
and connect it securely to the terminal block.
4. Install the lamp tube properly into the fixture.
5. Securely fasten the lampshade buckle. 6. Determine the mounting hole spacing according
to the table.
V-TAC WEST EUROPE LTD. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected]
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC WEST EUROPE LTD. GROUND FLOOR, 71 LOWER BAGGOT STREET, DUBLIN 02, IRELAND DO2 P593
V-TAC UK LTD. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT
[email protected] V-TAC, 5A TUNGSTEN PARK, DOWNS ROAD, WITNEY, OXFORDSHIRE, OX29 0AX
10
.
7 8
9 10
7. Fix the stainless steel bracket to the ceiling using
screws and expansion anchors.
8. Mount the waterproof lamp onto the installed
mounting brackets.
9. Restore the power supply and test the lamp.
