TM
ABSORBENT GLASS MAT (AGM) BATTERY
FOR WHEELCHAIRS, MOTORCYCLES & MORE
Version : V1.0
https://catalog.mightymaxbattery.com/?v=29.218
https://catalog.mightymaxbattery.com/?v=29.218
https://catalog.mightymaxbattery.com/?v=29.218
https://catalog.mightymaxbattery.com/?v=29.218mightymaxbattery.com/register
Warranty
Registration
Catalog
Submit for 3 month extension
https://www.mightymaxbattery.com/register/
https://www.mightymaxbattery.com/register/
Discount Code SLA10
3775 Park Avenue UNIT 3
Edison, NJ 08820
(855) 378-7135
(718) 492-6102 fax
www.mightymaxbattery.com
10% discount
Warning
Notes
And
Safety
Regulations
Warnings:
Keep out of the reach of children.
Keep battery away from fire. Avoid
causing sparks and short-circuits.
Do not smoke while near battery
Warning:
Use eye protection when working on the
battery. Do not place batteries in direct
sunlight without protection. Discharged
batteries can freeze up, store in an area
free from frost. Do not pry open sealed
cover plate under any circumstance.
Never block the vent opening.
First Aid:
- If acid fumes are inhaled: seek fresh air. In case of irregular breathing or
respiratory arrest, seek medical advice immediately and administer first aid.
In case of respiratory irritation: consult a physician.
- If acid splashes in the eye: remove contact lenses if applicable. Immediately
rinse with clean water for at least 15 minutes.Then consult a physician.
- If acid splashes on the skin or in the hair: immediately remove any
contaminated clothing. Rinse skin or hair with water or in the shower.
- If acid splashed on clothing: absorb spillage to prevent material damage.
Immediately neutralize with baking soda (sodium bicarbonate) or soapy water
and rinse thoroughly with water.
- If acid is swallowed: immediately rinse mouth and drink plenty of water.
DO NOT induce vomiting. If you feel unwell, call a POISON CENTER
or a physician.
Disposal:
Hand in old batteries at collection point. Never dispose of old batteries as
domestic waste.
Battery Inspection
Thank you for choosing Mighty Max as your trusted battery
supplier. Please read instructions carefully prior to use.
Inspect battery fully before installation. If outside casing is cracked, terminals
damaged or battery leaking, do not use and contact distributor.
This battery is a charged sealed battery with a venting valves. It is factory activated
and maintenance-free. It requires no checking of electrolyte level or adding of water.
This battery is low self-discharge with long shelf life.
General Instructions
Checking the battery:
Use a voltmeter or multimeter to measure voltage. If a voltage of more than 12 volt
is shown, the battery can be used immediately. If the battery voltage is lower, the
battery needs to be charged. Never use batteries of different models, types,
performances, capacities, sizes, or production dates in a group together.
Do not mix batteries from different manufacturers also.
Installation
Install the batteries at lowest position possible in a well-ventilated room. To ensure
good ventilation and heat dissipation, the batteries per row should be kept at
around 0.79” (20mm) interlock spacing. The position should be away from heat
sources, (e.g., transformer) and avoid installation in a closed compartment or near
sparks. (e.g., near a switch or fuse), to prevent the possible ignition of hydrogen.
Clean or polish the terminals before connection of batteries. Be careful to prevent
the short circuit of battery positive and negative terminals by metal items. Please
screw all the nuts, bolts, washes, and the connecting wires tightly when installing
the battery. Loose connection may cause electric arcing or burning of the terminal.
Please use the insulated tools when installing the battery. When connecting the
battery to a charger or a load, keep the circuit switch OFF and connect the battery’s
positive (+) terminal to the positive (+) pole of the charger or the load and the
battery’s negative (-) terminal to the negative (-) pole of the charger or the load.
Otherwise, damage of battery, charger (or equipment) or injury of body may occur.
Do not mix batteries from different types, production dates, manufacturers, sizes,
or different models in a group.
When multi-strings of batteries are to be parallel connected, connect batteries in
series’ first & then complete the parallel connection. Parallel cables to the
charge/load should be as close in size and length from each of the parallel strings
to prevent uneven voltage drops that can imbalance the parallel battery strings.
Torque Conversion Table
Inch Pounds
Foot Pounds
kgf-cm
1 N-m
8.851
0.7376
10.2
After batteries are installed, test the voltage of the battery string.
Make sure there are no battery modules that have been incorrectly
installed in reverse polarity. If all modules installed correctly, link
battery to load.Use correct torque on all terminals, ensuring every
connecting nut and screw is secure
For GEL Powersport batteries:
Adding electrolyte is optional. To do so, the battery’s lid cover must be opened, and safety
valve removed. Electrolyte filling should only be done by a professional. Do not open and fill
the battery yourself. It is not necessary to add electrolyte to use the battery. The battery
comes ready for use. Kindly note that any modifications to battery, including adding electrolyte,
voids warranty
Note:
All cell/bloc voltages of a battery group may have some voltage difference during initial use.
Within half year later they should all become matched.
Effect from too high voltage for long time (overcharge): battery life shortened.
Effect from too low voltage for long time (not charged enough): Cannot meet load and/or
makes battery voltage inconsistent. The battery group capacity will drop and battery life will
be shortened accordingly.
Storage & Maintenance
During the delivery and storage, the battery will lose part of the capacity due to
self-discharge, so please supplement charge before use; if storage occurs before
installation / connection, supplement charge regularly; Avoid inducing static electricity during
clean of batteries.
Use damp cloth for cleaning, never use organic solvents (e.g., gasoline or thinner).
Otherwise, the container or cover may develop cracks.
Keep batteries and battery room clean, well-ventilated, and dry. Protect the battery from
direct sunlight.
Transportation:
When transporting the battery, never vibrate or impact it excessively
Always transport a battery in an upright position and secure against tipping over
When transporting a battery connected to equipment, secure it firmly and
keep the circuit open
Return old battery to a recycling center, never dispose old battery as domestic
waste
Choose adequate means for shipment, delivery and handling of battery as appropriate to
weight. Don't roll and throw battery. Avoid placing upside down.
Be careful not to damage the terminals and valve plugs
CAUTIONS
Keep batteries out of reach of children
Do NOT use batteries for application other than those specified in its specification
Do NOT attempt to dis-assemble revised, damaged, impacted, disposed batteries,
otherwise the battery would leak, get hot, or explode.
Do NOT dispose of the batteries in water, fire, and do not heat the batteries.
Do NOT cause any short circuit
If the voltage of battery pack is above 45V, please be sure to wear insulated
gloves when working; otherwise, there is a risk of severe electrical shock.
Do NOT bring face close to the top of batteries. Please keep a sensible distance
when you near battery. Please wear safety goggles.
There is sulfuric acid in the battery, do not allow contact of sulfuric acid with skin,
cloths, especially eyes. If eyes come in contact with sulfuric acid, please wash
with a lot of clean water, and consult a physician immediately.
