User Manual
1. ALL-OFF:The main switch for the fan and the lights.
2. Light switch: Short press: Fan on and off; Long press for 3 seconds: Match the
code.
3. Fan speed Settings 1 to 6 Regulation: Fan speed adjustment.
4. silent mode: The buzzer switch is in the on position,There is a prompt sound [beep]
in the state.
5. Comfortable Breeze Mode: There is a gentle wind mode.
6. Fan motor reversal: Control the fan to reverse.
7. The fan is rotating forward: Control the fan to rotate forward.
8. 1 hour Automatically turn off the fan: Set for one hour and the time will end Turn off
the fan function after the beam.
9. 4 hour Automatically turn off the fan: Set for four hour and the time will end Turn off
the fan function after the beam.
10. Dimming (brightening):Increase brightness.
11. Dimming (darkening): Lower the brightness.
12. Color temperature +: Increase the color temperature.
13. Color temperature -: Reduce the color temperature.
14. Key combination 1: Press the "Comfort Breeze" button and the "1H"
button simultaneously.
15. Key combination 2: Press the "Comfort Breeze" button and the "4H"
button simultaneously.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation, If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
