
www.victoryrangehoods.com
Rev.20220906
Ceiling-Mount Range Hood
(Ductless)
Model Name:
JUPITER
NOTICE: For residential use only.
Installer: Leave this guide with the homeowner.
Homeowner: Keep this guide for future reference.
INSTALLATION GUIDE
AND USERS MANUAL

Important Safety Notice............................................................................ 3
Electrical Requirements............................................................................ 5
Specications............................................................................................ 6
Required Tools........................................................................................... 7
Dimensions................................................................................................. 9
Preparation................................................................................................. 10
Installation.................................................................................................. 11
Filters.......................................................................................................... 15
Range Hood Operations............................................................................ 16
Maintenance............................................................................................... 17
Warranty...................................................................................................... 18
Disclaimer................................................................................................... 19
Contact Us................................................................................................. 19
Parts Supplied............................................................................................ 7
VICTORY range hoods
| JUPITER
2
VICTORY range hoods
JUPITER |
3
TABLE OF CONTENTS

• The installation in this manual is intended for qualied installers, service technicians or
persons with similar qualied background. Installation and electrical wiring must be done by
qualied professionals and in accordance with all applicable codes and standards, including
re-rated construction.
• DO NOT attempt to install this appliance yourself. Injury could result from installing the unit
due to lack of appropriate electrical and technical background.
• Range hood may have very sharp edges; please wear protective gloves if it is necessary to
remove any parts for installing, cleaning or servicing.
• Activating any switch ON before completing installation may cause ignition or an explosion.
• Due to the size and weight of this range hood, two-person installation is recommended.
To reduce the risk of re, electric shock, or injury to persons:
• For general ventilating use only. DO NOT use to exhaust hazardous or explosive materials
and vapors.
• The combustion air ow needed for safe operation of fuel-burning equipment may be aected
by this unit’s operation. Follow the heating equipment manufacturer’s guideline and safety
standards such as those published by the National Fire Protection Association (NFPA), and
the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE),
and the local code authorities.
• Before servicing or cleaning unit, switch power OFF at service panel and lock service panel
to prevent power from being switched ON accidentally.
• Clean grease laden surfaces frequently. To reduce the risk of re and to disperse air properly,
make sure to vent air outside. DO NOT vent exhaust into spaces between walls, crawl
spaces, ceiling, attics and/or garages.
• Ducted fans MUST always be vented to the outdoors.
• Use only metal ductwork and this unit MUST be grounded.
• Sucient air is needed for proper combustion and exhausting of gases through the duct to
prevent back drafting.
• When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other
hidden utilities.
• All electrical wiring must be properly installed, insulated and grounded.
• Old duct work should be cleaned or replaced if necessary to avoid the possibility of a grease
re.
• Check all joints on duct work to insure proper connection and all joints should be properly
taped.
• Use this unit only in the manner intended by the manufacturer. If you have questions, contact
the vendor.
To reduce the risk of a stove top grease re:
• Keep all fans, spacers, lters, grease tunnels, oil containers and grease-laden surfaces
clean. Grease should not be allowed to accumulate on fan, bae, spaces, lter, grease
tunnel and oil container.
• Always turn range hood ON when cooking at high heat or when cooking foods that produce
ames.
• Use high settings on cooking range only when necessary.
• Never leave surface units unattended at high settings. Boil overs cause smoking and greasy
spillovers that may ignite. Heat oils slowly on low or medium settings.
VICTORY range hoods
| JUPITER
2
VICTORY range hoods
JUPITER |
3
IMPORTANT SAFETY NOTICE
Read all instructions before installing and operating this appliance

• Clean ventilating fan frequently.
• Always use appropriate cookware and utensils size.
• Always use cookware appropriate for the size of the surface element.
To reduce the risk of injury to persons in the event of a stove top grease re:
• Smother ames with a close-tting lid, cookie sheet, or metal tray, then turn OFF the burner.
Be careful to PREVENT BURNS. Never pick up a pan that has ames—you may be burned.
Keep ammable and/or combustible material away from ames. If the ames DO NOT go out
immediately, EVACUATE and CALL the FIRE DEPARTMENT or dial your local emergency
service immediately.
• DO NOT use WATER, including wet dishcloths or towels — it will result in a violent steam
explosion
• Use an extinguisher ONLY if:
• You know you have a Class A, B, C extinguisher, and you already know how to operate it.
• The re is small and contained in the area where it has started.
• The re department is on the way.
• You can ght the re while having access to a safe exit.
To reduce the risk of injury to persons in the event of a gas leaks:
• Extinguish any open ame.
• DO NOT turn on the range hood fan or any type of ventilator.
• DO NOT turn on the lights or any type of appliance.
• Open all doors and windows to disperse the gas. If you still smell gas, call the gas company
and re department or dial your local emergency service immediately.
Your safety and the safety of others is very important. We have provided many important safety
messages in this manual and on your appliance. Always read and obey all safety messages. All
safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.
This is the safety alert symbol. This symbol alerts you to potential hazards that can hurt you
and others. All safety messages will follow the safety alert symbol and the word “WARNING”.
The manufacturer and/or distributor/reseller declines all responsibility in the event of failure to
observe the instructions given here for installation, maintenance and suitable use of the product.
The manufacturer and/or distributor/reseller further declines all responsibility for injury due to
negligence and the warranty of the unit automatically expires due to improper maintenance.
The manufacturer and/or distributor/reseller will not be held responsible for any damages to
personal property or real estate or any bodily injuries whether caused directly or indirectly by
the range hood.
VICTORY range hoods
| JUPITER
4
VICTORY range hoods
JUPITER |
5
IMPORTANT SAFETY NOTICE
Read all instructions before installing and operating this appliance

IMPORTANT: Observe all governing codes and ordinances.
It is the customer’s responsibility:
• To contact a qualied electrician
• To assure that the electrical installation is adequate and in conformance with National Electrical
Code, ANSI/NFPA 70 — latest edition*, or CSA Standards C22. 1-94, Canadian Electrical Code,
Part 1 and C22. 2 No. 0-M91 - latest edition** and all local codes and ordinances.
If codes permit and a separate ground wire is used, it is recommended that a qualied electrician
determine that the ground path is adequate.
A 120-Volt, 60 Hz, AC-only, fused electrical supply is required on a separate 15-amp circuit.
DO NOT ground to a gas pipe.
Check with a qualied electrician if you are not sure that the range hood is properly grounded.
DO NOT have a fuse in the neutral or ground circuit.
IMPORTANT: Save this Installation Guide for electrical inspector’s use.
The range hood must be connected with copper wire/plug only.
The range hood should be connected directly to the fused disconnect (or circuit breaker) box through
exible armored or non-metallic sheathed copper cable. A U.L. - or C.S.A. - listed strain relief must be
provided at each end of the power supply cable.
Wire sizes (copper wire only) and connections must conform with the rating of the appliance as specied on
the model/serial rating label. Wire sizes must conform to the requirements of the National Electrical Code
ANSI/NFPA 70 — latest edition*, or CSA Standards C22. 1-94, Canadian Electrical Code Part 1 and C22. 2
No. 0-M91 - latest edition** and all local codes and ordinances. A U.L. - or C.S.A. - listed conduit connector
must be provided at each end of the power supply cable (at the range hood and at the junction box).
Copies of the standards listed may be obtained from:
* National Fire Protection Association
Batterymarch Park
Quincy, Massachusetts 02269
** CSA International
8501 East Pleasant Valley Road
Cleveland, Ohio 44131-5575
VICTORY range hoods
| JUPITER
4
VICTORY range hoods
JUPITER |
5
ELECTRICAL REQUIREMENTS

Body Design Seamless Stainless Steel, Brushed Finish
Power Rating 120V/60Hz (USA & Canada standard)
General Input Power 122 W (120W + 2 x 1W)
Motor Input Power 120 W
Ampere 4 A
Levels Of Speed Control 3 Levels
Airow
1
(Q/M/H) 200 CFM / 400 CFM / 600 CFM
Noise Level
2
(Q/M/H) 1.0 Sone / 3.5 Sone / 5.5 Sone
Number Of Motors Single Motor
Motor Type Single Chamber Ultra Quiet
Fan Type Centrifugal Squirrel Cage
Control Type Remote control and Electronic Control Panel
Filtration Type 1 Aluminum Mesh Grease Filter and 2 Charcoal Filters
Illumination 2 x LED 1W 12v
Venting Type Recirculated
1. In House Test Static Pressure “0”.
2. One sone is roughly equivalent to the sound of a refrigerator (1kHz) at 40 decibels.
3. Subject to change without notice, please contact your local reseller for details.
SPECIFICATIONS
GROUNDING INSTRUCTIONS:
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This appliance is
equipped with a cord having a grounding wire.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualied electrician if the grounding instructions are not completely understood, or if
doubts exists as to whether the appliance is properly grounded.
If the power supply cord is too short, have a qualied electrician install an outlet near the
appliance.
VICTORY range hoods
| JUPITER
6
VICTORY range hoods
JUPITER |
7
ELECTRICAL REQUIREMENTS (Continued)

Putty Knife
Marker
or Pencil
Tape
Measure
Level
Phillips and Flathead
Screwdriver
Aluminum
Tape
Power
Drill
Utility
Knife
Drywall
Knife
Pliers
Conc
rete
An
chor
assem
b
ly
(x4)
Woodsc
rew
s
w
ith conc
rete
anchors
(x8)
Remote Control
59”
Thin b
raided c
able
w
ith beaded end
(x4)
Zip ties (x2)
M
4 - 4m
m
B
ig H
ead
(x4)
Adjust
able
Screw
w
ith
Locking
Screw
and nut
(x4)
M
10 - Sc
rew
C
ap
and Ba
rrel
(x1)
M
10 - Sc
rew
N
ut
(x2)
Wirecap
(x3)
NOTE:
Where necessary, additional screws will be needed for installation and added support, but is not included.
Please review contents before installation.
VICTORY range hoods
| JUPITER
6
VICTORY range hoods
JUPITER |
7
REQUIRED TOOLS
PARTS SUPPLIED

Hanging Board
Decorative Board
Ceiling Mount
Unit: JUPITER
Aluminum
Mesh Filter
CONTROL PANEL
ON RANGE HOOD
Timer
Lights
Fan Blower
On / Off
If y our ceiling height is
more than 8 feet, a longer
main power cable will be
required to be i nstalled
by a certified electrician
*
13 ¾”- Ø
15”
1”
Combined length of
stainless steel cable
and hood unit can
reach up to 65”
(will fit 8’-10’ ceiling)
VICTORY range hoods
| JUPITER
8
VICTORY range hoods
JUPITER |
9
PARTS SUPPLIED (Continued)

Hanging Board
9
9
13
Decorative Board
1”
BOTTOM VIEW
FRONT VIEW SIDE VIEW
TOP VIEW
15”
13¾”- Ø
VICTORY range hoods
| JUPITER
8
VICTORY range hoods
JUPITER |
9
DIMENSIONS

BEFORE INSTALLING THE RANGE HOOD, CHECK FOR PHYSICAL DAMAGES. THIS
RANGE HOODS COMES WITH HARD WIRING. HAVE AN ELECTRICIAN TEST THE HOOD
BEFORE INSTALLATION.
If there is a grinding noise coming from the motor, DO NOT INSTALL IT, contact us as soon as
possible.
Advanced Preparations:
1. Read the entire installation guide and users manual thoroughly, understand instructions and
warnings.
2. Be familiar with the controls of the range hood.
3. Place the range hood on a at, stable surface. HAVE AN ELECTRICIAN connect the range
hood (please refer the product label for the suitable voltage of this unit) and verify no debris
has entered the openings, then turn on the range hood.
4. Place all supplied parts and required hardware on a at, stable surface and verify the
existence of all supplied parts.
5. Carefully remove the white/blue plastic protective coat from the range hood if any.
Preparations:
NOTE: To avoid damage to your hood, prevent debris from entering any opening.
1. Determine and mark the center line on the ceiling where the range hood will be installed.
Make sure there is proper clearance within the ceiling or wall for exhaust duct.
2. Due to the weight and size of this unit, please make sure that the support system or framework
being used is stable and secure in the ceiling.
3. Put a thick, protective covering over counter top, cook top or range to protect from damage
or dirt. Remove any hazardous objects around the area when installing.
4. Mark the locations of the support mounting bracket holes, and power supply cable cutout on
the ceiling. Use drill and saber saw or keyhole saw to cut openings for power supply cable.
5. Use caulking to seal exterior wall or roof openings.
6. Disconnect main electrical supply, prepare and run electrical wiring through ceiling. Leave
approximately 12” of electrical cord hanging from the ceiling. Do not restore power until
wiring is completed.
7. Disconnect power cord, remove the aluminum mesh lter.
8. Set aside the aluminum mesh lter until the range hood is properly installed.
VICTORY range hoods
| JUPITER
10
VICTORY range hoods
JUPITER |
11
PREPARATION

JoistJoistJoist
120v Power120v Power120v Power
Ceiling
Will fit 8ft-10ft
(If your ceiling height i s
more than 8 feet, a longer
main power cable will be
required to be installed by
a certified electrician)
36”
(Typical)
24” minumum
30” maximum
JUPITER Hood Unit
centered above stove
Combined length of
stainless steel cable
and hood unit can
reach up to 65”
VICTORY range hoods
| JUPITER
10
VICTORY range hoods
JUPITER |
11
INSTALLATION

Adjustable
Screw (x4)
M10 - Barrel (x1)
and Nut (x2)
(a)
(b) (c)
Locking
Screw
and nut
(x4)
Ceiling Joist
a) Align centre of range hood with
centre of island stove countertop.
b) Paper stencil provided
will help line up the hanging
board.
c) To give proper support to
range hood, add two 6”x4”
braces separated 6½” from
centre in between the joists.
d) Cable coming from
120v power supply
through ceiling.
e) Fasten woodscrews to
the hanging board and
bracing.
Woodscrews
(x8)
VICTORY range hoods
| JUPITER
12
VICTORY range hoods
JUPITER |
13
INSTALLATION (Continued)

a)
b)
Braided cable with
beaded end
c)
M4 - 4mm
Big Head
M10- Screw Nut
TOP DOWN VIEW
VICTORY range hoods
| JUPITER
12
VICTORY range hoods
JUPITER |
13
INSTALLATION (Continued)

Green
(ground to frame)
WhiteWhite
Black
Black
MOTOR
Unlock
Lock
5) Drop down the decorative
board and thread the power cord
through remaining accessible
hole on the decorative board.
6) Have an electrician properly install the power cord to
the 120v power supply through the ceiling ensuring that it
is grounded and insulated. Reinstall decorative board, and
level the unit by rotating the adjustment screws.
Charcoal Filters (x2)
Aluminum Mesh
Grease Filter (x1)
VICTORY range hoods
| JUPITER
14
VICTORY range hoods
JUPITER |
15
INSTALLATION (Continued)

Timer
Lights
LED Display
Fan Blower
Power
On / Off
REMOTE CONTROL
Timer:
Motor On/O:
CONTROL PANEL
Connecting the remote control
Resetting your connection to the remote control (clear code)
Lights On/O:
• To operate the timer, rst turn on the range hood from
the remote contro by poressing the up-arrowl. Next, use
the remote control and press the timer button. This will
activate the 9 minute timer. The range hood will continue
to operate for 9 minutes before shutting o. The timer
can also be controlled directly from the electronic switch
on the range hood.
• To turn on the fan of the range hood yo Speed 1, click
the up-arrow on the remote control. The unit has 3
speeds. Click the up-arrow to increase speed, or click
the down-arrow to decrease the speed. The motor can
also be controlled directly from the electronic switch on
the range hood.
1. Press the “Power” button to turn ON and OFF the range
hood unit.
2. Press the “Fan Blower” button to change the fan speed to
low/med/high. The LED Display will indicate as 1, 2, 3
3. Press “Light” button to turn ON and OFF the lights. The Light
button works independently from the “Power” button.
4. When the range hood unit is turned on, you may use the
“Timer” button. When pressed/activated there will be 9
minutes to count down for the unit to turn o the fan blower
and the lights. The LED Display will show the designated
9 minutes and count down in increments of a minute (i.e.
9...8...7...6...). You may press the timer button again to
disable the timer.
1. Press the Power button for 5 seconds. The indicators light begin ashing
from one button to another, and the unit is in connection mode. Press
any button on the remote control to conrm the connection.
1. Press the Power button for 5 seconds and the indicators light begin
ashing from one button to another, and the unit is in connection mode.
2. Press the Power button again for 5 seconds and the previous code will
be cleared. Repeat “Connecting the remote control” instructions.
• To turn on the lights of the range hood, click the light
button on the remote control. The unit has 4 LED lights
(not dimmable). The lights can also be controlled directly
from the electronic switch on the range hood.
*The remote control may slightly vary
VICTORY range hoods
| JUPITER
14
VICTORY range hoods
JUPITER |
15
RANGE HOOD OPERATIONS

SAFETY WARNING: Never put your hand into area housing the fan while the fan is operating!
For optimal operation, clean range hood and any lter/grease tunnel/oil container regularly.
Regular care will help preserve the appearance of the range hood.
Cleaning Exterior surfaces:
• Clean periodically with stainless steel cleaner and clean cotton cloth. Do not use corrosive or
abrasive detergent (e.g. Comet Power Scruv
®
, EZ-O
®
oven cleaner), or steel wool/scoring
pads, which will scratch and damage the stainless steel surface. For heavier oil use liquid
degrease such as “Forumla 409
®
” or “Fantastic
®
” brand cleaner.
• If the hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the
surface of the hood. Avoid getting cleaning solution onto or into the control panel. Follow
directions of the stainless steel cleaner. CAUTION: Do not leave on too long as this may
cause damage to the hood nish. Use a soft towel to wipe o the cleaning solution, gently
rub o any stubborn spots. Use a dry soft towel to dry the hood.
• After cleaning, you may use non abrasive stainless steel polish such as 3M
®
or ZEP
®
, to
polish and bu out the stainless luster and grain. Always scrub lightly, a with clean cotton
cloth, and with the grain.
• DO NOT allow deposits to accumulate or remain on the hood.
• DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the
surface and cause rusting.
• DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain
in contact with stainless steel for extended periods. Many of these compounds contain
chemicals, which may be harmful. Rinse with water after exposure and wipe dry with a clean
cloth.
Changing Charcoal Filters:
• Contact Victory Range Hoods to order new charcoal lters
• Filters should be changed every 3 to 6 months depending on frequency of use
• Make sure the range hood is unplugged or turn OFF breaker before removing lters
• After installing lters, turn ON breaker and range hood to test for operation.
Cleaning Aluminum Mesh Grease Filter:
• Filters should be cleaned after every 30 hours of use.
• Aluminum lters are NOT dishwasher safe. Spray “Formula 409
®
” or equivalent degreasing
detergent and leave to soak if very dirty. Dry the lters and re-install before using the hood.
Replacing Aluminum Mesh Grease Filters:
• Should lters wear out due to age and prolonged use, please contact Victory Range Hoods
to order replacement lters.
Replacing the light bulb:
• This range hood uses LED 1W 12v bulbs (please refer to the actual specication of the hood
purchased)
• Make sure the range hood is unplugged or turn OFF breaker.
• Contact Victory Range Hoods for assistance to replace bulb.
• Turn ON breaker and range hood to test for operation.
VICTORY range hoods
| JUPITER
16
VICTORY range hoods
JUPITER |
17
MAINTENANCE

TO OBTAIN SERVICE UNDER WARRANTY:
You must present proof of original purchase date.
Please provide an original dated proof of purchase (sales receipt / invoice)
in order to obtain service under warranty.
One Year Parts Warranty:
For one year from the date of original purchase, Victory Range Hoods will provide free of
charge, non-consumable replacement parts or components that failed due to manufacturing
defects. Subject to the conditions and limitations set forth below, Victory Range Hoods will
replace any part of its products that prove defective by reason of improper workmanship or
materials. Replacement parts or products will be provided by Victory Range Hoods on an
exchange basis, and will be either new or refurbished to be functionally equivalent to new.
Who is Covered:
This warranty is extended to the original purchaser for products purchased for ordinary
home use.
This Warranty Will Be Voided When:
Product is damaged through negligence, improper installation, accident, abuse, misuse,
natural disaster, insucient or excessive electrical supply, abnormal mechanical or
environmental conditions, or any unauthorized disassembly, repair, modication, or failure to
follow installation instructions. When product is used commercially or other than its intended
purpose. Damaged because of improper connection with equipment of other manufacturers.
Repaired or modied by anyone other than Victory Range Hoods. This limited warranty
also does not apply to any product on which the original identication information has been
altered, obliterated or removed, has not been handled or packaged correctly or has been
sold as second-hand.
What is Not Covered:
Consumable parts such as light bulbs, metal and charcoal lters. The natural wear of nish,
and wear due to improper maintenance, use of corrosive and abrasive cleaning products,
pads, and oven cleaner products. Chips, dents or cracks due to abuse, misuse, freight
damage, or improper installation. Damage of product caused by accident, re, oods or
acts of God. The manufacturer and/or distributor/reseller is not liable for, and does not cover
under warranty, any loss of properties or any costs associated with removing, servicing,
installing, or determining the source of problems with this product.
This warranty is valid in Canada and the United States of America. It is non-transferable and
applies only to the original purchaser and does not extend to subsequent owners of this product.
Any applicable implied warranties, including the warranty of merchantability, are limited in
duration to a period of express warranty as provided herein beginning with the date of original
purchase and, no warranties, whether expressed or implied, shall apply to this product thereafter.
To obtain warranty service, you may contact Victory Range Hoods. Please conrm the terms
of Victory Range Hood’s policies prior to contacting us. Typically, you must include product
identication information, such as the model number/name with a detailed description of the
problem you are experiencing. You must also include proof of the date of original purchase as
evidence that the product is within the applicable warranty period, and that it is a genuine range
hood from Victory Range Hoods.
The information in this document is subject to change without notice, please contact Victory Range Hoods for updated details.
WARRANTY
VICTORY range hoods
| JUPITER
16
VICTORY range hoods
JUPITER |
17

Carefully inspect all items for damages before accepting delivery. note any damages on the
freight bill or express receipt. request name and signature of the carrier’s agent and keep a
copy to support your claim. Upon acceptance of items, owner assumes responsibility for its
safe arrival. Report damages to the carrier and le a claim immediately. Failure to do so may
result in the denial of your claim. The carrier will furnish you with necessary forms for ling a
claim.
Damages on any returns or exchanges caused during transit are not covered under our war-
ranty (the customer must insure the return with the shipping company). If your range hood is
damaged in transit, please contact us within 14 days of receiving your new order to report the
damages. Victory Range Hoods will, to the best of its ability, le a damage claim and investi-
gate the matter.
Please inspect contents of package(s) carefully upon receiving! We must be notied of any
damages and/or missing parts within fourteen (14) days upon your receipt of the package(s).
Claims will not be accepted after fourteen (14) days. NOTE: Items are thoroughly tested and
carefully packed in our facility before shipping.
Products must be returned in good working condition with ALL original parts and documenta-
tion packed in all original cartons, llers and shipping cartons. A restocking fee of 10% will be
charged for all approved return(s). Exchanges or returns will not be accepted if the unit has
been installed, and may be rejected if parts are missing.
Make sure to inspect the hood for damages and defects before installation. Appearance aws
of the hood found after installation and not aecting hood performance are not covered under
our warranty for returns or exchanges. Service visits are not covered under warranty and will
carry a service charge.
If you require assistance, please contact Victory Range Hoods. Please have your order number
and model of the range hood ready. You must have this information in order to receive a response
to your request.
If you need replacement parts, we recommend using only genuine parts. Our accessories
and parts are engineered and designed specically for VICTORY range hoods. Each part is
rigorously tested assuring the utmost in durability and reliability, providing a factory match,
factory-installed appearance and functionality tailored to each individual range hood model.
583 Nicola Avenue, Port Coquitam, BC, Canada
Toll Free: 1-800-394-4020
The information in this document is subject to change without notice, please contact Victory Range Hoods for updated details.
VICTORY range hoods
| JUPITER
18
VICTORY range hoods
JUPITER |
19
DISCLAIMER
CONTACT US

VICTORY range hoods
| JUPITER
18
VICTORY range hoods
JUPITER |
19
NOTES

583 Nicola Avenue | Port Coquitlam | BC | Canada | V3B 0M3
www.victoryrangehoods.com
