
SCA SH1001 SENCOR ® Car seat heater
Warning!
Do not use the seat heater when:
- It is obviously damaged;
- outdoor;
- it is wet;
- the power cord or plug are damaged;
- it is broken;
- you use pacemaker or similar appliances;
- you are pregnant.
No part of the seat heat may cover the airbag outlet of the seat armrest.
Protect against moisture, dripping or pouring water.
Do not use the seat heater near the open fire, do not place an open fire, such as a candle, on the seat heater.
Do not leave the seat heater plugged in the car unattended, it can discharge the battery or risk of overheating.
Do not fold the seat heater when plugged in!
Do not use the seat heater for any other purposes than the intended usage.
Cleaning and maintenance
The seat heater does not use any special maintenance. Use only a soft, slight wet cloth or sponge to clean the surface. Do not use any
abrasive agents or chemical solvents (paint and varnish thinner, etc.) as such substances may damage the heater fabrics.
Never wash the seat heater in the dishwasher!
Do not clean the seat heater under the running water.
Usage
1. Take the seat heater out of the protective cover. This dispose upon the local directive rules.
2. Install the seat heater on the car seat. Ensure the installation stripes are safely secured.
3. Plug into the 12V cigarette lighter.
4. Switch to HI position for high power or LO position for lower power. To turn off, switch to OFF position.
Technical specifications
Power consumption: 48 W (HI), 36 W (LO)
Draws: 3-4 A
Fuse: 10 A
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as
household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic
equipment waste.
Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.
Manufacturer address: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany. The original version is in Czech.
