
Model: U3224KB
Regulatory model: U3224KBt
Dell UltraSharp 32 6K Monitor
-U3224KB
User’s Guide

NOTE: A NOTE indicates important information that helps you make
better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.
Copyright © 2023-2024 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other
trademarks
are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective
owners.
2024 – 02
Rev. A02

| 3
Contents
Safety instructions..............................6
About your monitor .............................7
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . 7
Product features. . . . . . . . . . . . . . . . . . . . . . . . . .8
Identifying parts and controls. . . . . . . . . . . . . . . . . . 10
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Bottom view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Monitor specifications. . . . . . . . . . . . . . . . . . . . . . 15
Resolution specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Preset display modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Thunderbolt
TM
4 out for daisy chain . . . . . . . . . . . . . . . . . . . . . 19
Unified Communications (UC) Platform Compatibility List . . . . . . . .20
Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Webcam – microphone specifications . . . . . . . . . . . . . . . . . . . .22
Speaker Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Environmental characteristics . . . . . . . . . . . . . . . . . . . . . . . .24
Video Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Pin assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Plug-and-Play capability . . . . . . . . . . . . . . . . . . . . 34
LCD monitor quality and pixel policy . . . . . . . . . . . . . . 34
Ergonomics . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Handling and moving your display. . . . . . . . . . . . . . . . 36
Maintenance guidelines . . . . . . . . . . . . . . . . . . . . . 38
Cleaning your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Contents | 3

4 |
Setting up the monitor..........................39
Attaching the stand . . . . . . . . . . . . . . . . . . . . . . . 39
Using the tilt, swivel, and vertical extension . . . . . . . . . . 42
Tilt, swivel, and vertical extension. . . . . . . . . . . . . . . . . . . . . .42
Rotating the Display . . . . . . . . . . . . . . . . . . . . . . . 43
Organizing your cables . . . . . . . . . . . . . . . . . . . . . 44
Connecting your monitor . . . . . . . . . . . . . . . . . . . . 45
Dell Power Button Sync (DPBS) . . . . . . . . . . . . . . . . 54
Connecting the monitor for DPBS for the first time . . . . . . . . . . . .56
Using DPBS function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Connecting the monitor for Thunderbolt
TM
daisy chain function. . . . . .59
Connecting the monitor for Thunderbolt
TM
4 . . . . . . . . . . . . . . . .60
Operating the monitor webcam . . . . . . . . . . . . . . . . . 62
Dell Peripheral Manager . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Securing your monitor using Kensington lock (optional) . . . 64
Removing the monitor stand . . . . . . . . . . . . . . . . . . 65
Wall mounting (Optional) . . . . . . . . . . . . . . . . . . . . 66
Operating the monitor ..........................67
Power on the monitor . . . . . . . . . . . . . . . . . . . . . . 67
Using the joystick control . . . . . . . . . . . . . . . . . . . . 67
Using the rear-panel controls . . . . . . . . . . . . . . . . . . 69
Front-panel button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Using the Main Menu . . . . . . . . . . . . . . . . . . . . . . 71
Using the OSD lock function . . . . . . . . . . . . . . . . . . 88
Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
OSD warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Setting the maximum resolution. . . . . . . . . . . . . . . . . . . . . . .95
Setting up Windows Hello . . . . . . . . . . . . . . . . . . . . 96
Setting up the monitor webcam as default setting. . . . . . .100
Setting up the monitor speaker as default setting . . . . . . .105

| 5
Troubleshooting ..............................108
Self-test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Built-in diagnostics . . . . . . . . . . . . . . . . . . . . . . .109
Common Problems. . . . . . . . . . . . . . . . . . . . . . . .110
Product specific problems . . . . . . . . . . . . . . . . . . . 115
Microsoft
®
Teams
®
/ Skype for Business
®
specific problems . 122
Universal Serial Bus (USB) specific problems . . . . . . . . . 123
Appendix....................................124
FCC notices (U.S. only) and other regulatory information . . .124
Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . 124

6 | Safety instructions
Safety instructions
Use the following safety guidelines to protect you monitor from potential damage and
to ensure your personal safety. Unless otherwise noted, each procedure included in this
document assumes that you have read the safety information that shipped with your
monitor.
NOTE: Before using the monitor, read the safety information that
is shipped with your monitor and printed on the product. Keep the
documentation at a secure location for future reference.
WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
WARNING: The possible long-term effect of listening to audio at high
volume through the headphones (on monitor that support it) may cause
damage to your hearing ability.
• Place the monitor on a solid surface and handle it carefully. The screen is fragile
and can be damaged if dropped or hit with a sharp object.
• Ensure that your monitor is electrically rated to operate with the AC power
available in your location.
• Keep the monitor in room temperature. Excessive cold or hot conditions can have
an adverse effect on the liquid crystals of the display.
• Connect the power cable from the monitor to a wall outlet that is near and
accessible. See Connecting your monitor.
• Do not place and use the monitor on a wet surface or near water.
• Do not subject the monitor to severe vibration or high impact conditions. For
example, do not place the monitor inside a car trunk.
• Unplug the monitor when it is going to be left unused for an extended period.
• To avoid electric shock, do not attempt to remove any cover or touch the inside
of the monitor.
• Read these instructions carefully. Keep this document for future reference. Follow
all warnings and instructions marked on the product.
• Certain monitors can be wall mounted using the VESA mount that is sold
separately. Ensure to use the correct VESA specifications as mentioned in the
wall mounting section of the User’s Guide.
For information on safety instructions, see the Safety, Environmental, and Regulatory
Information (SERI) document that is shipped with your monitor.

About your monitor | 7
About your monitor
Package contents
The following table provides the list of components that are shipped with your monitor,
If any component is missing, contact Dell. For more information, see Contact Dell.
NOTE: Some items may be optional and may not ship with your monitor.
Somefeatures may not be available in certain countries.
Component image Component description
Display
Stand riser
Stand base
Power cable (varies by country)

8 | About your monitor
DisplayPort cable (mDP to mDP)
USB 3.2 Gen2 Type-A to Type-C
upstream cable
Thunderbolt
TM
4 cable
32
32 U3224KB
•Quick Setup Guide
•Safety, Environmental, and Regulatory
Information
•Factory Calibration Report
Product features
The Dell UltraSharp U3224KB monitor has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features include:
• 79.94 cm (31.5 in.) active area display (Measured diagonally) 6144 x 3456 (16:9)
resolution, plus full-screen support for lower resolutions.
• Wide viewing angles with 100% sRGB color, 99% DCI-P3, 100% Rec.709 & 99%
Display P3.
• Tilt, swivel, pivot, and vertical extension adjustment capabilities.
• Built-in speakers (2 x 14 W).
• Removable pedestal stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Ultra-thin bezel minimizes the bezel gap during multi-monitor usage, enabling
easier set up with an elegant viewing experience.
• Extensive digital connectivity with DP helps future-proof your monitor.
• Thunderbolt
TM
4 to supply power to compatible notebook while receiving video
signal.
• Thunderbolt
TM
4 and RJ45 ports enable a single-cable, network-connected
experience.
• Plug and play capability if supported by your computer.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Power and OSD buttons lock.

About your monitor | 9
• Security lock slot.
• Stand lock.
• Power consumption ≤0.26W in Standby Mode.
• Supports Picture by Picture (PBP) and Picture in Picture (PIP) Select mode.
• Allow user to switch USB KVM function in PBP/PIP mode.
• The monitor is designed with Dell Power Button Sync (DPBS) feature to control
PC system power state from monitor power button.
• Premium Panel Exchange for peace of mind.
• Optimize eye comfort with a flicker-free screen and ComfortView Plus feature.
• This monitor uses low blue light panel. When the monitor is reset to factory
settings or default setting (Preset mode: Standard), it works in compliance
with TUV Rheinland (hardware solutions provider).
• Decreases the level of hazard blue light emitted from the screen to make viewing
more comfortable for your eyes.
• The monitor adopts Flicker-Free technology, which clears the eye visible flicker,
brings comfort viewing experience and preventing users suffer from eye strain
and fatigue.
• Certified for Windows Hello
®
(Face Authentication) and supports Microsoft
Cortana
®
.
• Additional customization using Dell Peripheral Manager.
WARNING: The possible long-term effects of blue light emission from the
monitor may cause damage to the eyes, which includes but is not limited to
eye fatigue and digital eyestrain. ComfortView Plus feature is designed to
reduce the amount of blue light emitted from the monitor to optimize eye
comfort.

10 | About your monitor
Identifying parts and controls
Front view
8
8
1 2 3 54 6 7
9 10 11 12 13
16
14 15
Label Description Use
1,7 Microphones Monitor microphones (Mic).
2 IR LED Indicator of infrared (IR).
3 RGB Camera Transmits your image in a video conference.
4 Proximity Sensor The human presence wake & lock feature.
5 Webcam LED
indicator
Indicator of Webcam. It will light up in white when
webcam is in use.
6 IR Camera The face recognition feature.
8 Built-in speakers To output the sound from audio input.

About your monitor | 11
9 Hookswitch & LED LED will blink in green when there is an incoming
Teams/Skype for Business (SfB) call.
LED will light up in static green during Teams/Skype
for Business (SfB) call.
Short press to answer / end call.
Long press to reject incoming call.
10 Volume down & LED Short press for 2 unit volume decrement.
Long press for continuous volume decrement.
11 Volume up & LED Short press for 2 unit volume increment.
Long press for continuous volume increment.
12 Microphone mute
& LED
Press to mute and unmute microphone.
LED will light up in static red when mic is muted.
LED will go dark when mic is enabled/unmuted.
13 Camera Mute & LED Press to lock and unlock camera shutter.
If locked, icon will light up in red, no software can
override and open camera shutter to use the camera.
If unlocked, icon will not light up, software can open
camera shutter to use the camera when it’s needed.
NOTE: This camera disable button must not be
confused with “Webcam and presence sensor:
enable / disable” in OSD.
Disabling “webcam & presence sensor” will turn off
the whole webcam module, webcam and sensor will
not appear in the system.
14 USB Type-C
downstream port
(USB 3.2 Gen2)
Port with
icon supports 5 V/3 A.
Connect your USB device. You can use these ports
only after you have connected the USB cable (Type-A
to Type-C or Thunderbolt
TM
4) from the computer to
the monitor.
NOTE: This port is downstream only and unable to
broadcast video or sound to the display or speakers.
15 Super speed USB 10
Gbps (USB 3.2
Gen2)
Connect your USB device. You can use these ports
only after you have connected the USB cable from the
computer to the monitor.
Port 15 with
battery icon supports Battery
Charging Rev. 1.2.
16 Power LED indicator Solid white light indicates the monitor is turned on and
functioning normally. Breathing white light indicates
the monitor is in Standby Mode.

12 | About your monitor
Back view
7
1
2
3
6
5
4
Label Description Use
1 VESA mounting holes (100 mm
x 100 mm-behind attached
VESA cover)
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x 100
mm).
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Releases stand from the monitor.
4 Power On/Off button To turn the monitor on or off.
5 Joystick Use it to control the OSD menu.
For more information, see Operating the
Monitor.
6 Mac address, Barcode, serial
number, and Service Tag label
Refer to this label if you need to contact Dell
for technical support. The Service Tag is a
unique alphanumeric identifier that enables
Dell service technicians to identify the
hardware components in your computer and
access warranty information.
7 Cable-management slot Use to organize cables by inserting them
through the slot.

About your monitor | 13
Bottom view
1 4 5 6 7 8
13
32 11 12910
Label Description Use
1 Security lock slot
(based on
Kensington
Security Slot
TM
)
Secures monitor with security cable lock (sold separately)
2 Power connector Connect the power cable.
3 HDMI port Connect your computer with the HDMI cable.
4 mDP Connect your computer with the mDP to mDP cable.
5 Thunderbolt
TM
4
downstream
Thunderbolt
TM
4 downstream port only suitable for video
output under Daisy chain, Connecting the monitor for
TBT daisy chain.
NOTE:
1) Thunderbolt™ 4 up to 40Gbs bandwidth;
2) Supports up to two 6K monitors through the Daisy
chain;
3) The highest power output up to 15W;
4) USB-C downstream port supports 5V/3A.
6 USB-C upstream
port
Connect the USB cable that comes with your monitor to
the computer. Once this cable is connected, you can use
the USB downstream connectors on the monitor.

14 | About your monitor
7 Thunderbolt
TM
4
upstream
Connect to your computer using the Thunderbolt
TM
cable.
The Thunderbolt
TM
4 upstream offer the fastest transfer
rate (USB 4 40Gbps), TBT mode and the alternate mode
with DP 1.4 support the following, and PD 28 V/5 A,
20V/4.5A, 15 V/3 A, 9 V/3 A, 5 V/3 A.
Maximum resolution of 6144 x 3456 at 60 Hz (DSC)
The Thunderbolt
TM
4 upstream power is more than 100W,
the connected equipment and accessory cables should
have fire enclosure of V1 level or higher and VW-1 rating
wire.
This model will feature Thunderbolt
TM
4.0 technology
and will have a 140W power delivery, it is recommended
for use the following Dell’s products that meet the fire
enclosures.
NOTE: Thunderbolt
TM
4 upstream is not supported on
Windows versions that are prior to Windows 10.
CAUTION: A reduced performance warning message
may appear when connecting monitor’s Thunderbolt
TM
4 port to the USB Type-C port of the computer. To
optimize performance, it is recommended to connect to
the Thunderbolt
TM
4 port of the computer.
8,9,
10,11
Super speed USB
10 Gbps (USB 3.2
Gen2)
Connect your USB device. You can use these ports
only after you have connected the USB cable from the
computer to the monitor.
12 RJ-45 connector
(2.5G)
Connect Internet. You can surf Internet via RJ45 only
after you have connected the USB cable (Type-A to
Type-C or Thunderbolt
TM
4) from the computer to the
monitor.
13 Stand lock Lock the stand to the monitor using a M3 x 8 mm screw
(screw not included).

About your monitor | 15
Monitor specifications
Screen type Active matrix - TFT LCD
Panel Type In-plane switching Technology
Aspect ratio 16:9
Viewable image dimensions
Diagonal 79.94 cm
(31.5 in.)
Active Area
Horizontal 696.73 mm
(27.43 in.)
Vertical 391.91 mm
(15.43 in.)
Area 273,055.45 mm
2
(423.24 in.
2
)
Pixel pitch 0.1134(H) mm x 0.1134(V) mm
Pixel per inch
(PPI)
223
Viewing angle
Horizontal 178° (typical)
Vertical 178° (typical)
Brightness 450 cm/m
2
(typical)
Contrast ratio 2000 to 1 (typical)
Display screen
coating
Anti-glare treatment of the front polarizer (3H) hard coating
Backlight LED
Response Time
(Gray to Gray)
5 ms (Fast mode)
8 ms (Normal mode)
Color depth
1
1.07 billion colors
Color gamut
2
sRGB 100%
Rec. 709 100%
DCI-P3 99%
Display-P3 99%

16 | About your monitor
Connectivity •1 x Mini DP 2.1 (HDCP 2.2)(Supports up to 6K 6144 x 3456
60Hz 10bit, HDR)
•1 x HDMI (HDCP 2.2)(Supports up to 6K 6144 x 3456 60Hz
10bit FRL, HDR as per specied in HDMI 2.1)
•1 x Thunderbolt
TM
4 upstream (EPR PD 140W) with DSC
(Alternate mode with DisplayPort 1.4/1.2, USB 3.2 Gen 2
upstream port, Power Delivery up to 140 W)
•1 x Thunderbolt
TM
4 downstream (15W) for video output under
Daisy chain
•1 x USB Type-C (USB 3.2 Gen 2 upstream port)
•4 x super speed USB 10 Gbps (USB 3.2 Gen 2)
•1 x RJ45 (2.5G)
Quick Access:
•1 x USB-A (USB3.2 Gen 2 10 Gbps) with BC1.2
•2 x USB Type-C downstream (15 W), USB 3.2 Gen 2 (10 Gbps)
Border width (edge of monitor to active area)
To p
Left/Right
Bottom
42.93 mm
10.35 mm
23.05 mm
Adjustability
Stand
Height 160 mm
Tilt -5° to 21°
Swivel -30° to 30°
Pivot -90° to 90°
Slant NA
Camera
Tilt -20° to 0°
Cable
management
Yes
Dell Display
Manager (DDM)
Compatibility
Easy Arrange
and other key features
Security Security lock slot (cable lock sold separately)

About your monitor | 17
1
Video output from mDP/HDMI port at maximum resolution 6144 x 3456 at 60Hz
is 1.07 billion colors. Video output from Thunderbolt
TM
4 upstream at maximum
resolution 6144 x 3456 at 60Hz is 1.07 billion colors with DSC.
2
At panel native only, under Color Space preset.
Resolution specifications
Horizontal scan
range
30 kHz to 220 kHz
Vertical scan
range
56 Hz to 76 Hz
Maximum preset
resolution
6144 x 3456 at 60 Hz
Video display
capabilities
(HDMI & mDP &
Thunderbolt
TM
4
alternate mode)
480p, 576p, 720p, 1080i (HDMI only), 1080p, 2160p

18 | About your monitor
Preset display modes
Display mode Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
Pixel
clock
(MHz)
Sync polarity
(Horizontal/
Vertical)
VESA, 720 x 400
31.47
70
28.32
-/+
VESA, 640 x 480
31.47
60
25.17
-/-
VESA, 640 x 480
37.50
75
31.5
-/-
VESA, 800 x 600
37.88
60
40
+/+
VESA, 800 x 600
46.88
75
49.5
+/+
VESA, 1024 x 768
48.36
60
65
-/-
VESA, 1024 x 768
60.02
75
78.75
+/+
VESA, 1152 x 864
67.50
75
108
+/+
VESA, 1280 x 1024
64.0
60
108
+/+
VESA, 1280 x 1024 80.0 75 135 +/+
VESA, 1600 x 900
55.99
60
118.25
+/+
VESA, 1920 x 1080
67.50
60
148.50
+/+
CVR, 2560 x 1440
88.79
60
241.50
+/+
VESA, 3840 x 2160
133.31
60
533.25
+/-
VESA, 3840 x 2160
135.00
60
594
+/-
VESA, 1280 x 800 49.306 59.91 71 +/+
VESA, 1680 x 1050
64.674
59.883
119
+/+
VESA, 1920 x 1200
74.038
59.95
154
+/+
VESA, 1600 x 1200
75
60
162
+/+
VESA, 3840 x 2160
54
24
297
+/-
VESA, 3840 x 2160
56.25
25
297
+/-
VESA, 3840 x 2160 65.68 30 297 +/-
CVT, 5120 x 2880
177.71
60
952.5
+/-
CVT, 6016 x 3384
208.85
60
1323.25
+/-
CVT, 6144 x 3456
105.14
30
662.75
+/-
CVT, 6144 x 3456
213
60
1378.75
+/-

About your monitor | 19
Thunderbolt
TM
4 out for daisy chain
OSD Display Info:
Link rate(current)
Maximum external monitor resolution that can be supported
6144 x 3456 at 60 Hz
NOTE: Maximum external monitor resolution with the maximum number
of external monitors supported is 6144 x 3456 at 60Hz only when DSC is
enabled on graphic cards or with graphic cards that support DSC.

20 | About your monitor
Unified Communications (UC) Platform Compatibility List
The table below highlights the call functions that work on the Dell Video Conferencing
Monitor – U3224KB when using the following UC platforms
#
.
Call Functions
Answer call End call Reject call Adjust Speaker
volume down
Adjust Speaker
volume up
Mute/
Unmute
Microphone
Button
Hookswitch Hookswitch Hookswitch Volume Down Volume Up Mute
Microsoft
Teams
√ √ √ √ √ √
Skype for
Business
√ √ √ √ √ √
Zoom × × × √ √ √
*
Google
Hangouts
× × × √ √ √
*
BlueJeans × × × √ √ √
*
Cisco Webex × × × √ √ √
*
FaceTime × × × √ √ √
*
Slack × × × √ √ √
*
GoTo Meeting × × × √ √ √
*
Google Meet × × × √ √ √
*
Lifesize × × × √ √ √
*
Discord × × × √ √ √
*
Ring Central × × × √ √ √
*
√ Call function on the Dell U3224KB works with the UC platform
× Call function on the Dell U3224KB does not work with the UC platform
*
Mute function on the Dell U3224KB works by pressing the Mute button, but the
Mute Icon on the UC platform is not sync (Icon shows unmute).
#
On Windows 10 64 Bit OS

About your monitor | 21
Electrical specifications
Video input
signals
•Digital video signal for each dierential line
Per dierential line at 100 ohm impedance
•mDP/HDMI/Thunderbolt
TM
4 signal input support
Input voltage/
frequency/
current
100-240 VAC / 50 or 60 Hz ± 3 Hz / 4.6 A (maximum)
Inrush current 120 V: 42 A (Max.)
240 V: 80 A (Max.)
Inrush current is measured at an ambient temperature of 0°C
Power
Consumption
0.25 W (Off Mode)
1
0.26 W (Standby Mode)
1
3.1 W (Networked standby Mode)
1
56.73 W (On Mode)
1
420 W (Max)
2
54.86 W (P
on
)
3
185.85 kWh (TEC)
3
1
As dened in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting with maximum power loading on all USB ports.
3
P
on
: Power consumption of On Mode as dened in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as dened in Energy star 8.0 version.
This document is informational only and reects laboratory performance. Your prod-
uct may perform dierently, depending on the software, components, and peripherals
you ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
NOTE: This monitor is ENERGY STAR certied.
This product qualies for ENERGY STAR in the factory default settings which can be
restored by “Factory Reset” function in the OSD menu. Changing the factory default
settings or enabling other features may increase power consumption that could exceed
the ENERGY STAR specied limit.

22 | About your monitor
Webcam – microphone specifications
Lens Field of view (horizontal) 65 / 78 / 90 degree
Focus mode 5x digital zoom
Focus area 25 cm ~ ∞
Focusing distance 500 cm
Image Sensor Active array size 8 mega-pixel
Video Specication Video frame rate 3840 x 2160 (4K UHD)- up
to 30 frames per second
1920 x 1080 (Full HD)- up
to 60 frames per second
Audio Specication Microphone type Digital microphone x 2
Speaker Specifications
Speaker rated power 2 x 14 W
Frequency Response
100 Hz - 20 kHz
Impedance 4 ohm
Physical characteristics
Connector type •mDP connector
•HDMI connector
•RJ45 connector
•Thunderbolt
TM
4 upstream connector
•Thunderbolt
TM
4 downstream connector
•USB Type-C upstream connector
•USB 3.2 Gen 2 downstream connector x 5
•USB Type-C downstream connector x 2
Signal cable type mDP to mDP 1M cable
USB 3.2 Gen 2 Type-A to C 1M cable
Thunderbolt
TM
4 1.5M cable
Dimensions (with stand)
Height (extended)
682.63 mm (26.88 in.)
Height (compressed)
522.63 mm (20.58 in.)

About your monitor | 23
Width
717.42 mm (28.24 in.)
Depth
237 mm (9.33 in.)
Dimensions (without stand)
Height
486.64 mm (19.16 in.)
Width
717.42 mm (28.24 in.)
Depth
66.29 mm (2.61 in.)
Stand dimensions
Height (extended)
483.30 mm (19.03 in.)
Height (compressed)
436.50 mm (17.19 in.)
Width
316.00 mm (12.44 in.)
Depth
237.00 mm (9.33 in.)
Weight
Weight with
packaging
17.70 kg (39.02 lb)
Weight with stand
assembly and cables
13.30 kg (29.32 lb)
Weight without
stand assembly (For
wall mount or VESA
mount considerations
- no cables)
8.61 kg (18.98 lb)
Weight of stand
assembly
4.38 kg (9.66 lb)

24 | About your monitor
Environmental characteristics
Compliant Standards
•ENERGY STAR certified Monitor.
•EPEAT registered where applicable. EPEAT registration varies by country.
See https://www.epeat.net for registration status by country.
•TCO Certified & TCO Certified Edge.
•RoHS Compliant.
•BFR/PVC Free monitor (excluding external cables).
•Meets NFPA 99 leakage current requirements.
•Arsenic-Free glass and Mercury-Free for the panel only.
Temperature
Operating 0°C to 40°C (32°F to 104°F)
Non-operating –20°C to 60°C (–4°F to 140°F)
Humidity
Operating 10% to 80% (non-condensing)
Non-operating 5% to 90% (non-condensing)
Altitude
Operating 5,000 m (16,404 ft) (maximum)
Non-operating 12,192 m (40,000 ft) (maximum)
Thermal dissipation 1433.10 BTU/hour (maximum)
193.57 BTU/hour (on mode)

About your monitor | 25
Video Bandwidth
Host Video Cable Monitor 1
Resolution
Monitor 2
Resolution
USB Speed
USB-C (Alt
Mode DP1.2)
Thunderbolt
TM
4
Active Cable (40G)
3840 x 2160
@ 60Hz
Not
supported
Support USB 2.0
USB-C (Alt
Mode DP1.4)
Thunderbolt
TM
4
Active Cable (40G)
6144 x 3456
@ 30Hz
Not
supported
Support USB 2.0
USB-C (Alt
Mode DP1.4,
DSC Enabled)
Thunderbolt
TM
4
Active Cable (40G)
6144 x 3456
@ 60Hz
Not
supported
Support USB 2.0
TBT3 (Alt
Mode DP1.2)
Thunderbolt
TM
4
Active Cable (40G)
3840 x 2160
@ 60Hz
Not
connected
Support USB 2.0/
USB 3.0 Gen2
3840 x 2160
@ 60Hz
3840 x 2160
@ 60Hz
Support USB 2.0/
USB 3.0 Gen2
TBT4 (Alt
Mode DP1.4
DSC Enabled)
Thunderbolt
TM
4
Active Cable (40G)
6144 x 3456
@ 60 Hz
Not
connected
Support USB 2.0/
USB 3.0 Gen2
6144 x 3456
@ 60 Hz
6144 x 3456
@ 60 Hz
Support USB 2.0/
USB 3.0 Gen2

26 | About your monitor
Host Video Cable Monitor 1
Resolution
Monitor 2
Resolution
USB Speed
mDP 2.1 (DSC
Enable)
mDP to mDP
(UHBR 13.5G)
6144 x 3456
@ 60 Hz
Not
supported
Support USB 2.0/
USB 3.0 Gen2
(USB A - C cable
connected)
mDP to DP (HBR3,
8.1G)
6144 x 3456
@ 60 Hz
Not
supported
mDP 2.1 (DSC
Disable)
mDP to mDP
(UHBR 13.5G)
6144 x 3456
@ 60 Hz
Not
supported
mDP to DP (HBR3,
8.1G)
6144 x 3456
@ 30 Hz
Not
supported
DP 2.1 DP to mDP 6144 x 3456
@ 60 Hz
Not
supported
HDMI 2.1 HDMI 2.1 cable 6144 x 3456
@ 60 Hz
Not
supported
HDMI 2.0 cable 3840 x 2160
@ 60Hz
Not
supported
HDMI 2.0 HDMI 2.1 cable 3840 x 2160
@ 60Hz
Not
supported
HDMI 2.0 cable 3840 x 2160
@ 60Hz
Not
supported
NOTE: Require to set Display setting to Second Screen only.
NOTE: This table show that the max resolution which can reach.

About your monitor | 27
Pin assignments
Mini DP port
Pin number 20-pin side of theconnected signal cable
1 GND
2 Hot Plug Detect
3 ML3 (n)
4 CONFIG1
5 ML3 (p)
6 CONFIG2
7 GND
8 GND
9 ML2 (n)
10 ML0 (p)
11 ML2 (p)
12 ML0 (p)
13 GND
14 GND
15 ML1 (n)
16 AUX (p)
17 ML1 (p)
18 AUX (n)
19 GND
20 DP_PWR

28 | About your monitor
HDMI port
Pin number 19-pin side of theconnected signal cable
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2-
4 TMDS DATA 1+
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1-
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0-
10 TMDS CLOCK+
11 TMDS CLOCK SHIELD
12 TMDS CLOCK-
13 CEC
14 Reserved (N.C. on device)
15 DDC CLOCK (SCL)
16 DDC DATA (SDA)
17 DDC/CEC Ground
18 +5 V POWER
19 HOT PLUG DETECT

About your monitor | 29
Thunderbolt
TM
4/USB Type-C port
Pin Signal Pin Signal
A1 GND B12 GND
A2 SSTXp1 B11 SSRXp1
A3 SSTXn1 B10 SSRXn1
A4 VBUS B9 VBUS
A5 CC1 B8 SBU2
A6 Dp1 B7 Dn1
A7 Dn1 B6 Dp1
A8 SBU1 B5 CC2
A9 VBUS B4 VBUS
A10 SSRXn2 B3 SSTXn2
A11 SSRXp2 B2 SSTXp2
A12 GND B1 GND

30 | About your monitor
Universal Serial Bus (USB)
This section gives you information about the USB ports available on your monitor.
NOTE: Up to 2 A on USB downstream port (port with battery
icon) with BC 1.2 compliance devices; up to 0.9 A on the other 4 USB
downstream ports; Up to 3 A on USB-C downstream port (port with
icon) with 5 V/3 A compliance devices.
Your computer has the following USB ports:
• 2 upstream - 1*TBT + 1*USB-C at rear.
• 8 downstream - 2*USB-C + 1*USB-A at bottom, 1*TBT + 4*USB-A at rear.
Power Charging Port - the ports with
battery icon supports fast current
charging capability if the device is BC 1.2 compatible. The USB Type-C downstream
port with icon supports fast current charging capability if the device is 5V/3A
compatible.
NOTE: The monitor’s USB ports work only when the monitor is on or in
Standby Mode. On in Standby Mode, if the USB cable (A to C or C to C) is
plugged in, the USB ports can work normally. Otherwise, follow the OSD
setting of Other USB Charging, if the setting is “On in Standby Mode”
then USB work normally, otherwise USB is disabled. If you turn off the
monitor and then turn it on, the attached peripherals may take a few
seconds to resume normal functionality.
Super speed USB 10 Gbps (USB 3.2 Gen2) device
Transfer speed Data rate Maximum power consumption (each port)
Super speed+ 10 Gbps 4.5 W
Super speed 5 Gbps 4.5 W
Hi-speed 480 Mbps 2.5 W
Full speed 12 Mbps 2.5 W

About your monitor | 31
USB 3.2 Gen2 (10Gbps)
downstream port (Bottom)
USB 3.2 Gen2 (10Gbps)
downstreamport (Rear)
Pin number Signal name Pin number Signal name
1 VBUS 1 VBUS
2 D- 2 D-
3 D+ 3 D+
4 GND 4 GND
5 StdA_SSRX- 5 StdA_SSRX-
6 StdA_SSRX+ 6 StdA_SSRX+
7 GND_DRAIN 7 GND_DRAIN
8 StdA_SSTX- 8 StdA_SSTX-
9 StdA_SSTX+ 9 StdA_SSTX+
Shell Shield Shell Shield

32 | About your monitor
RJ45 Port (Connector Side)
Pin No. 10BASE-T
100BASE-T
1000BASE-T
1 Transmit+ BI_DA+
2 Transmit- BI_DA-
3 Receive+ BI_DB+
4 Unused BI_DC+
5 Unused BI_DC-
6 Receive- BI_DB-
7 Unused BI_DD+
8 Unused BI_DD-
Driver installation
Install the Realtek USB GBE Ethernet Controller Driver available for your system. This
is available for download at https://www.dell.com/support under the “Driver and
download” section.
Network (RJ45) data rate via USB-C max speed is 2.5Gbps.
NOTE: This LAN port is 2.5GBase-T IEEE 802.3az compliant, supporting
Mac Address (Printed on model label) Pass-thru (MAPT), Wake-on-LAN
(WOL) from standby mode and UEFI PXE Boot function [UEFI PXE Boot is
not supported on Dell Desktop PC’s (except for OptiPlex 7090/3090 Ultra
Desktop)], these 3 features depend on BIOS settings and version of the
OS. Functionality may vary with Non Dell PC’s.

About your monitor | 33
RJ45 Connector LED status:
Left LED
Right LED
LED
LED Color Description
Right LED Amber or Green Speed indicator:
•AmberOn-1000Mbps/2.5Gbps
•GreenOn-100Mbps
•Off-10Mbps
Left LED Green Link / Activity indicator:
•Blinking-Activityontheport.
•GreenOn-Linkisbeingestablished.
•Off-Linkisnotestablished.
NOTE: RJ45 cable is not a standard in-box accessory.

34 | About your monitor
Plug-and-Play capability
You can connect the monitor to any Plug and Play-compatible system. The monitor
automatically provides the computer with its Extended Display Identification Data
(EDID) using Display Data Channel (DOC) protocols so that the computer can
configure itself and optimize the monitor settings. Most monitor installations are
automatic; you can select different settings as required. For more information about
changing the monitor settings, see Operating the Monitor.
LCD monitor quality and pixel policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more
pixels to become fixed in an unchanging state which are hard to see and do not affect
the display quality or usability. For more information on Dell Monitor Quality and Pixel
Policy, see https://www.dell.com/pixelguidelines.

About your monitor | 35
Ergonomics
CAUTION: Improper or prolonged usage of keyboard may result in injury.
CAUTION: Viewing the monitor screen for extended periods of time may
result in eye strain.
For comfort and efficiency, observe the following guidelines when setting up and using
your computer workstation:
• Position your computer so that the monitor and keyboard are directly in front of
you as you work. Special shelves are commercially available to help you correctly
position your keyboard.
• To reduce the risk of eye strain and neck/arm/back/shoulder pain from using the
monitor for long periods of time, we suggest you to:
1. Set the distance of the screen between 20 to 28 in. (50 - 70 cm) from your
eyes.
2. Blink frequently to moisten your eyes or wet your eyes with water after
prolonged usage of the monitor.
3. Take regular and frequent breaks for 20 minutes every two hours.
4. Look away from your monitor and gaze at a distant object at 20 feet away for
at least 20 seconds during the breaks.
5. Perform stretches to relieve tension in the neck, arm, back, and shoulders
during the breaks.
• Make sure that the monitor screen is at eye level or slightly lower when you are
sitting in front of the monitor.
• Adjust the tilt of the monitor, its contrast, and brightness settings.
• Adjust the ambient lighting around you (such as overhead lights, desk lamps, and
the curtains or blinds on nearby windows) to minimize reflections and glare on the
monitor screen.
• Use a chair that provides good lower-back support.
• Keep your forearms horizontal with your wrists in a neutral, comfortable position
while using the keyboard or mouse.
• Always leave space to rest your hands while using the keyboard or mouse.
• Let your upper arms rest naturally on both sides.
• Ensure that your feet are resting flat on the floor.
• When sitting, make sure that the weight of your legs is on your feet and not
on the front portion of your seat. Adjust your chair’s height or use a footrest if
necessary to maintain a proper posture.
• Vary your work activities. Try to organize your work so that you do not have to sit
and work for extended periods of time. Try to stand or get up and walk around at
regular intervals.

36 | About your monitor
• Keep the area under your desk clear of obstructions and cables or power cords
that may interfere with comfortable seating or present a potential trip hazard.
monitor screen at or
below eye level
monitor and
keyboard
positioned
directly in front
of the user
feet at on the
oor
wrists relaxed
and at
Handling and moving your display
To ensure the monitor is handled safely when lifting or moving it, follow the guidelines
mentioned below:
• Before moving or lifting the monitor, turn off your computer and the monitor.
• Disconnect all cables from the monitor.
• Place the monitor in the original box with the original packing materials.
• Hold the bottom edge and the side of the monitor firmly without applying
excessive pressure when lifting or moving the monitor.

About your monitor | 37
• When lifting or moving the monitor, ensure the screen is facing away from you
and do not press on the display area to avoid any scratches or damage.
• When transporting the monitor, avoid any sudden shock or vibration to it.
• When lifting or moving the monitor, do not turn the monitor upside down while
holding the stand base or stand riser. This may result in accidental damage to the
monitor or cause personal injury.

38 | About your monitor
Maintenance guidelines
Cleaning your monitor
CAUTION: Read and follow the Safety instructions before cleaning the
monitor.
WARNING: Before cleaning the monitor, unplug the monitor power cable
from the electrical outlet.
For best practices, follow the instructions in the list below when unpacking, cleaning,
or handling your monitor:
• Use a clean cloth that is slightly dampened with water to clean the stand
assembly, the screen, and the chassis of your Dell monitor. If available, use a
screen-cleaning tissue or solution suitable for cleaning Dell monitors.
• After cleaning the surface of the table, ensure that it is thoroughly dry and free
from any moisture or cleaning agent before placing your Dell monitor on it.
CAUTION: Do not use detergents or other chemicals such as benzene,
thinner, ammonia, abrasive cleaners, alcohol, or compressed air.
CAUTION: Using chemicals for cleaning may cause changes in the
appearance of the monitor, such as color fading, milky film on the monitor,
deformation, uneven dark shade, and peeling of screen area.
WARNING: Do not spray the cleaning solution or even water directly on
the surface of the monitor. Doing so will allow liquids to accumulate at
the bottom of the display panel and corrode the electronics resulting in
permanent damage. Instead, apply the cleaning solution or water to a soft
cloth and then clean the monitor.
NOTE: Monitor damages due to improper cleaning methods and the use
of benzene, thinner, ammonia, abrasive cleaners, alcohol, compressed air,
detergent of any kind will lead to a Customer Induced Damage (CID). CID
is not covered under the standard Dell warranty.
• If you notice white residual powder when you unpack your monitor, wipe it off
with a cloth.
• Handle your monitor with care as a darker-colored monitor may get scratched
and show white scuff marks more than a lighter-colored monitor.
• To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn off your monitor when not in use.

Setting up the monitor | 39
Setting up the monitor
Attaching the stand
NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for the stand that was
shipped with your monitor. If you are attaching a stand that you purchased
from any other source, follow the setup instructions that were included
with the stand.
To attach the monitor stand:
1. Open the front ap of the box to get the stand riser and stand base.
2. Align and place the stand riser on the stand base.
3. Open the screw handle at the bottom of the stand base and turn it clockwise to
secure the stand assembly.

40 | Setting up the monitor
4. Close the screw handle.
1
2
3
5. Open the protective cover on the monitor to access the VESA slot on the
monitor.
6. Slide the tabs on the stand riser into the slots on the display back cover and
lower the stand assembly to snap it into place.

Setting up the monitor | 41
7. Hold the stand riser and lift the monitor carefully, then place it on a at surface.
NOTE: Hold the stand riser firmly when lifting the monitor to avoid any
accidental damage.
8. Lift the protective cover from the monitor.

42 | Setting up the monitor
Using the tilt, swivel, and vertical extension
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
Tilt, swivel, and vertical extension
With the stand attached to the monitor, you can tilt the monitor for the most
comfortable viewing angle.
5°
30
° 30
°
160 mm
21°
NOTE: The stand is detached when the monitor is shipped from the
factory.

Setting up the monitor | 43
Rotating the Display
Before you rotate the display, extend the display vertically until the top of the stand
riser and then tilt the display backwards until the maximum to avoid hitting the bottom
edge of the display.
2
1
90°
90°
NOTE: To toggle the display setting on your Dell computer between
landscape and portrait when rotating the display, download and install the
latest graphics driver. To download, go to https://www.dell.com/support/
drivers and search for the appropriate driver.
NOTE: When the display is in portrait mode, you may experience
performance degradation when using graphic-intensive applications such
as 3D gaming.

44 | Setting up the monitor
Organizing your cables
After attaching all necessary cables to your monitor and computer, (see Connecting
Your Monitor for cable attachment) organize all cables as shown above.
If your cable is not able to reach your PC, you may connect directly to the PC without
routing through the slot on the monitor stand.

Setting up the monitor | 45
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
NOTE: Dell monitors are designed to work optimally with the Dell supplied
cables inside the box. Dell does not guarantee the video quality and
performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The appearance
of the computer may vary.
To connect your monitor to the computer:
1. Turn o your computer.
2. Connect the Mini DisplayPort or USB cable, and the Thunderbolt
TM
4 cable from
your monitor to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: U3224KB default setting is DisplayPort 2.0. A DisplayPort 1.4
Graphic card may not display normally. Please refer to product specific
problems – No image when using DP connection to the PC to change
default setting.
Connectivity steps for Notebook:
1. Check if your personal computer supports Thunderbolt4 (DP1.4) port or
USB-C alt mode DP1.4 port, with DSC* enabled.
2. Using the Thunderbolt cable (shipped with your monitor), establish the
connection between the laptop and monitor.
Connectivity steps for Desktop:
Connection through the DP/mDP port
1. Check if your desktop and/or graphics card supports DP 2.1/mDP 2.1 port with
DSC* enabled.
2. Using the mDP or DP cable that supports DP 2.1, establish the connection
between the desktop and monitor.
3. Using the USB-C to USB-A cable (shipped with your monitor), connect the
USB-C end to your monitor’s USB-C upstream port.
NOTE: You can also use the USB-C to USB-C cable that supports USB 3.0
Gen2 to connect monitor’s USB-C upstream port to your desktop.

46 | Setting up the monitor
Connection through the HDMI port
1. Check if your desktop and/or graphics card supports HDMI 2.1 port with DSC*
enabled and FRL**.
2. Using the HDMI cable that supports HDMI 2.1, establish the connection between
the desktop and the monitor.
3. Using the USB-C to USB-A cable (shipped with your monitor), connect the
USB-C end to your monitor’s USB-C upstream port.
NOTE: You can also use the USB-C to USB-C cable that supports USB 3.0
Gen2 to connect monitor’s USB-C upstream port to your desktop.
Connectivity steps for Dock:
Prerequisites:
Check if your laptop/desktop and dock support Thunderbolt4 (DP1.4) port, USB-C alt
mode DP 1.4 port with DSC* enabled, DP 2.1/mDP 2.1 port with DSC* enabled or the
HDMI 2.1 port with DSC* enabled and FRL**.
Step System specification Instructions
1 For both laptop/desktop and
dock that supports Thunder-
bolt4 (DP1.4) with DSC*
enabled:
Using the Thunderbolt cable (shipped
with your monitor), establish the con-
nection between the dock and monitor.
2 For both laptop/desktop and
dock that supports USB-C alt
mode DP1.4 port with DSC*
enabled:
Using the USB-C to USB-C cable that
supports USB 3.0 Gen2 or Thunderbolt
cable (shipped with your monitor),
establish the connection between the
dock and monitor.
3 For both laptop/desktop or dock
that supports DP 2.1/mDP 2.1
port with DSC* enabled or HDMI
2.1 port with DSC* enabled and
FRL**
1. Using the DP/mDP cable that
supports DP 2.1 or HDMI cable that
supports HDMI 2.1, establish the
connection between the dock and
monitor.
2. Using the USB-C to USB-A cable
(shipped with your monitor) or the
USB-C to USB-C cable that sup-
ports USB 3.0 Gen2, establish the
connection between the dock and
monitor.
*Data Stream Compression (DSC) is a visually lossless compression technique used
with displays to achieve larger resolutions at higher refresh rates.

Setting up the monitor | 47
**Fixed Rate Link (FRL) is a signaling technology that is supported in the HDMI 2.1
specification. FRL is necessary to achieve the higher uncompressed resolutions such
as those above 4k60 and the ultrahigh speed bandwidths up to 48 Gbps.

48 | Setting up the monitor
Connecting the HDMI cable (Optional)
Switch to lower / higher primary resolution
1. Press the joystick button to launch the OSD main menu.
2. Move the joystick to select input source.
Exit
mDP
HDMI
Auto Select On
Auto Select for Thunderbolt Prompt for Multiple Inputs
Reset Input Source
Rename Inputs
Thunderbolt (140W)
Thunderbolt (140W)
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
UltraSharp 32 Monitor
3. Move the joystick up or down to select HDMI, press and hold the joystick 8 Sec,
the following message will appear:
Switch to lower primary resolution for HDMI?
Yes
No

Setting up the monitor | 49
4. Select Yes to switch from HDMI 2.1 4 block EDID and max resolution is 6k to
HDMI 2.1 2 block and max resolution is 4k (or select No to cancel this operation).
5. Repeat steps 3 and 4 again to switch from HDMI 2.1 2 block and max resolution is
4k to HDMI 2.1 4 block EDID and max resolution is 6k.
Switch to higher primary resolution for HDMI?
Yes
No

50 | Setting up the monitor
Connecting the mDP cable
Connecting the Thunderbolt
TM
4 cable
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
Connecting the USB-C Cable (A to C)

Setting up the monitor | 51
Connecting the USB Type-C cable (C to C) (Optional)
NOTE: This connection only data is available and no video. Need another
video connection for display.

52 | Setting up the monitor
NOTE: Regardless of the power requirement/actual power consumption
of your laptop, or the remaining power runtime in your battery, the Dell
monitor is designed to supply power delivery of up to 140 W to your
laptop.
Rated power (on laptops that have USB
Type-C with Power Delivery)
Maximum charging power
45 W 45 W
90 W 90 W
140 W *140 W
*Need laptops support EPR 140W charging.
WARNING: The Dell UltraSharp 32 6K Monitor-U3224KB supports USB
Type-C Power Delivery 3.1 (Thunderbolt
TM
4) specification and can provide
a maximum output of up to 140 W. For safety consideration, this USB
Type-C port must be connected to the Dell-approved products with the
inbox USB Type-C cable. For the list of Dell-approved products, refer
Dell products compatible with USB Type-C Power Delivery 3.1 (Extended
Power Range 140W) Tech sheet at Dell.com/support/U3224KB.

Setting up the monitor | 53
Connecting the monitor for Thunderbolt
TM
4 daisy chain function
Thunderbolt
TM
4
downstream
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
upstream
NOTE: The maximum number of supported via daisy chain is subjected to
the bandwidth of the Thunderbolt
TM
4. Please refer to “product specific
problems –No image when using Thunderbolt
TM
4 daisy chain”.
Connecting the monitor for RJ45 Cable (Optional)
Thunderbolt
TM
4
upstream
port
Thunderbolt
TM
4

54 | Setting up the monitor
Dell Power Button Sync (DPBS)
Your monitor is designed with Dell Power Button Sync (DPBS) feature to allow you to
control PC system power state from the monitor power button. This feature is only
supported with Dell platform which has built-in DPBS function, and is only supported
over Thunderbolt
TM
4 interface.
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
To make sure the DPBS function works for the first time, perform the following steps
on the DPBS supported platform in the Control Panel first.
NOTE: DPBS only supports the Thunderbolt
TM
4 port.
1. Go to Control Panel.
2. Select Hardware and Sound, followed by Power Options.

Setting up the monitor | 55
3. Go to System Settings
4. In the drop-down menu of When I press the power button, there are a few
options for selection namely Do nothing/Sleep/Hibernate/Shut down, and you
can select Sleep/Hibernate/Shut down.
NOTE: Do not select Do nothing, otherwise monitor power button cannot
sync with PC system power state.

56 | Setting up the monitor
5. Go to Monitor OSD Display, turn On from off in Dell Power Button Sync.
50Sharpness
Normal
Response Time
16:9
Aspect Ratio
Exit
Dell Power Button Sync
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
O
Smart HDR
Reset Display
Audio & Webcam
UltraSharp 32 Monitor
O
On
Connecting the monitor for DPBS for the first time
Initial monitor power state (OFF)
Initial system power state (OFF)
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
For the first time setting up the DPBS function, please follow below steps:
1. Make sure both the PC and monitor is OFF.
2. Connect the Thunderbolt
TM
4 cable from the PC to the monitor.
3. Press the monitor power button to turn ON the monitor.
4. Both the monitor and PC will turn ON normally. If not, press either the monitor
power button or PC power button to boot up the system.
5. When you connect the Dell OptiPlex 7090/3090 Ultra platform, you may see both
the monitor and PC will turn ON momentarily. Wait for a while (approximately 6
seconds) and both the PC and monitor will turn OFF. When you press either the
monitor power button or PC power button, both the PC and monitor will turn ON.
The PC system power state is in sync with the monitor power button.
NOTE: When the monitor and PC are both at power OFF state at first time,
it is recommended that you turn ON the monitor first, then connect the
Thunderbolt
TM
4 cable from the PC to the monitor.
NOTE: You can power the Dell PC* Ultra platform using its DC adaptor
jack. Alternatively, you can power the Dell PC* Ultra platform using the

Setting up the monitor | 57
monitor’s Thunderbolt
TM
4 cable via Power Delivery (PD); please set
Thunderbolt
TM
4 Charging to On in Off Mode.
* Ensure to check the Dell PC for DPBS supportability.
Using DPBS function
When you press the monitor power button or PC power button, the Monitor / PC
state is as follows:
Initial monitor power state (OFF)
Initial monitor power state (ON)
New Power state of monitor (ON)
New Power state of system (ON)
New Power state of monitor (OFF)
New Power state of system (OFF)
1 2
1 2
Initial system power state (OFF)
Initial system power state (ON)
Press PC/Monitor
power button
Press PC/Monitor
power button
Thunderbolt
TM
4
Thunderbolt
TM
4
Thunderbolt
TM
4
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
upstream
When the monitor and PC power state are both ON, while you press and hold 4
seconds on monitor power button, the screen prompt will ask if you would like to
shut down the PC.
Press and hold 4s
Thunderbolt
TM
4
PC will shut down

58 | Setting up the monitor
Slide to shut down your PC
When the monitor and PC power state are both ON, while you press and hold 10
seconds on monitor power button, the PC will shut down.
Press and hold 10s
Thunderbolt
TM
4

Setting up the monitor | 59
Connecting the monitor for Thunderbolt
TM
daisy chain function
A PC is connected to two monitors in an initially OFF power state, and the PC system
power state is in sync with Monitor 1 power button. When you press the Monitor 1 or
PC power button, both the Monitor 1 and PC turns ON. Meanwhile the Monitor 2 will
remain OFF. You need to manually press the power button on Monitor 2 to turn it ON.
System power state (ON)
Monitor 1Monitor 2
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
downstream
Thunderbolt
TM
4
upstream
Similarly, a PC is connected to two monitors in an initially ON power state, and the
PC system power state is in sync with Monitor 1 power button. When you press the
Monitor 1 or PC power button, both the Monitor 1 and PC turns OFF. Meanwhile the
Monitor 2 will be in Standby mode. You need to manually press the power button on
Monitor 2 to turn it OFF.
System power state (OFF)
Monitor 1Monitor 2
Going into Standby mode...
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
downstream
Thunderbolt
TM
4
upstream

60 | Setting up the monitor
Connecting the monitor for Thunderbolt
TM
4
The Dell PC* Ultra platform has two Thunderbolt
TM
4 ports, so both Monitor 1 and
Monitor 2 power state can sync with the PC.
While the PC and two monitors are in an initially ON power state, by pressing the
power button on Monitor 1 or Monitor 2 will turn OFF the PC, Monitor 1, and Monitor 2.
* Ensure to check the Dell PC for DPBS supportability.
NOTE: DPBS only supports the Thunderbolt
TM
4 port.
Monitor 1
System power state (ON)
port1
Monitor 2
port2
Thunderbolt
TM
4
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
upstream
System power state (OFF)
Pressing power button on Monitor 1 or 2
Monitor 1
Monitor 2
port1
port2
Thunderbolt
TM
4
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
upstream

Setting up the monitor | 61
Make sure to set Thunderbolt
TM
4 to On in Off Mode. While the PC and two monitors
are in an initially OFF power state, by pressing the power button on Monitor 1 or
Monitor 2 will turn ON the PC, Monitor1, and Monitor 2.
System power state (OFF)
Monitor 1
Monitor 2
port1
Thunderbolt
TM
4
port2
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
upstream
Pressing power button on Monitor 1 or 2
Monitor 1
System power state (ON)
Monitor 2
port1
port2
Thunderbolt
TM
4
Thunderbolt
TM
4
Thunderbolt
TM
4
upstream
Thunderbolt
TM
4
upstream

62 | Setting up the monitor
Operating the monitor webcam
The webcam offers the following:
• 0-20 degree tilt adjustability
• 4K video at 30 fps and Full HD video at 60 fps
• AI Auto-framing
• 5x digital zoom
• Adjustable field-of-view with autofocus
• High Dynamic Range (HDR) and video noise reduction support
• Walk Away Lock and Wake on Approach support
• Windows Hello support
• Additional customization using Dell Peripheral Manager
Auto-framing (Single user framing):
• If the user is within 2 meters of the webcam, the webcam will enable the Auto-
framing.
• Feature and adjust the frame to focus on the user. You can enable Auto-framing
to ensure the camera always keeps you in the center of the frame.
HDR and Video Noise Reduction:
• The webcam’s Digital Overlap HDR guarantees superior picture quality in extreme
lighting environments, while video noise reduction automatically eliminates grainy
images in low light.

Setting up the monitor | 63
Dell Peripheral Manager
What is Dell Peripheral Manager?
The Dell Peripheral Manager application helps you manage and set up various Dell
Peripherals connected to your computer. It allows the user to make changes to
webcam settings of the device and provides additional customization.
For more details on the application and the customizations available for the Dell
U3224KB, find the User’s Guide for Dell Peripheral Manager at
www.dell.com/support.

64 | Setting up the monitor
Securing your monitor using Kensington lock (optional)
The security lock slot is located at the bottom of the monitor. (See Security lock
slot). Secure your monitor to a table using the Kensington security lock.
For more information on using the Kensington lock (purchased separately), see the
documentation that is shipped with the lock.
NOTE: The image is for the purpose of illustration only. Appearance of the
lock may vary.

Setting up the monitor | 65
Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the stand,
ensure that the monitor is placed on a soft surface and handle it carefully.
NOTE: The following steps are specifically for removing the stand that
is shipped with your monitor. If you are removing a stand that you
purchased from any other source, follow the setup instructions that are
included with the stand.
To remove the stand:
CAUTION: Place the monitor screen on the desktop. Take note that the webcam is
slightly protruded out of the monitor screen, please protect the webcam surface to
prevent wear by the desktop.
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand-release button.
3. Lift the stand up and away from the monitor.
2
3

66 | Setting up the monitor
Wall mounting (Optional)
NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-
mounting kit.
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor on a soft cloth or cushion on a stable flat table.
2. Remove the stand.
3. Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall as instructed in the documentation that shipped
with the wall-mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with
minimum weight/load bearing capacity of 34.4 kg (75.92 lb).

Operating the monitor | 67
Operating the monitor
Power on the monitor
Press the button to turn on the monitor.
Using the joystick control
To modify the OSD adjustments using the joystick control on the rear end of the
monitor, do the following:
1. Press the joystick to open the OSD Menu Launcher.
2. Move the joystick up/down/left/right to toggle between the OSD menu options.

68 | Operating the monitor
Joystick Functions
Joystick Description
Press joystick to open the OSD Menu Launcher.
For right and left navigation.
For up and down navigation.

Operating the monitor | 69
Using the rear-panel controls
Press the Joystick to open the OSD Menu Launcher.
Display Info
Menu Launcher
• Toggle the Joystick Up to open the Main Menu.
• Toggle the Joystick Left or Right to select the desired Shortcut Keys.
• Toggle the Joystick Down to Exit.
Menu Launcher Details
The following table describes the Menu Launcher icons:
Options Description
Shortcut key:
Menu
Use this Menu button to launch the on-screen
display (OSD) and select the OSD menu.
Shortcut key:
Preset Modes
Use this button to choose from a list of preset
colormodes.
Shortcut key:
Brightness/Contrast
To directly access the Brightness/Contrast
adjustment sliders.
Shortcut key:
Display Info
Use this button to choose from a list of Display
Info.
Shortcut key:
Volume
Use this button to adjust the volume of the built-in
speakers.

70 | Operating the monitor
Options Description
Shortcut key: Input
Source
Use this button to choose from a list of Input
Source.
Shortcut key:
Aspect Ratio
Use this button to choose from a list of Aspect
Ratio.
Exit
Use this button to go back to the main menu or
exit the OSD main menu.
Front-panel button
Use the buttons on the front of the monitor to adjust the image settings.
Front Panel Description
1
Up Down
Use the Up (increase) and Down (decrease) buttons to
adjust items in the OSD menu.
2
Previous
Use the Previous button to go back to the previous
menu.
3
Next
Use the Next button to confirm your selection.
4
Tick
Use the Tick button to confirm your selection.

Operating the monitor | 71
Using the Main Menu
Icon Menu and
Submenus
Description
Brightness/
Contrast
Use this menu to activate Brightness/Contrast
adjustment.
Input Source
Color
Brightness/Contrast
Display
Exit
75% 75%
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
UltraSharp 32 Monitor
Brightness Adjusts the luminance of the backlight (Range: 0 - 100).
Move the Joystick Up to increase brightness.
Move the Joystick Down to decrease brightness.
Contrast Adjust the Brightness first, and then adjust Contrast
only if further adjustment is necessary.
Move the Joystick Up to increase contrast and Move the
Joystick Down to decrease contrast (Range: 0 - 100).
The Contrast function adjusts the degree of difference
between darkness and lightness on the monitor screen.

72 | Operating the monitor
Icon Menu and
Submenus
Description
Input Source Use the Input Source menu to select between different
video inputs that are connected to your monitor.
Exit
mDP
HDMI
Auto Select On
Auto Select for Thunderbolt Prompt for Multiple Inputs
Reset Input Source
Rename Inputs
Thunderbolt (140W)
Thunderbolt (140W)
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
UltraSharp 32 Monitor
Thunderbolt
(140W)
Select Thunderbolt (140W) input when you are using
the Thunderbolt (140W) connector. Press the joystick
button to confirm the selection.
mDP Select mDP input when you are using the mDP (Mini
DisplayPort) connector. Press the joystick button to
confirm the selection.
HDMI Select the HDMI input when you are using the HDMI
connector. Press the joystick button to confirm the
selection.
Auto Select Allows you to scan for available input sources.
Press
to select this function.
Auto Select for
Thunderbolt
Press
to select these functions:
•Prompt for Multiple Inputs: always show Switch to
Thunderbolt Video Input message for user to choose
whether to switch or not.
•Yes: The monitor always switches to Thunderbolt video
by default while Thunderbolt is connected.
•No: The monitor will NOT auto switch to Thunderbolt
video from another available input.
Rename Inputs Allows you to Rename Inputs.
Reset Input
Source
Resets all settings under the Input Source menu to the
factory defaults. Press
to select this function.

Operating the monitor | 73
Icon Menu and
Submenus
Description
Color Adjusts the color setting mode.
RGBInput Color Format
Standard
Preset Modes
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Reset Color
Audio & Webcam
UltraSharp 32 Monitor
Preset Modes When you select Preset Modes, you can choose
Standard, Movie, Game, Color Temp, Color Space or
Custom Color from the list.
Standard
Input Color Format
Preset Modes
Exit
UltraSharp 32 Monitor
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Hue
Saturation
Reset Color
Game
Color Temp
Custom Color
Color Space
Movie
Audio & Webcam

74 | Operating the monitor
Icon Menu and
Submenus
Description
•Standard: Default Color setting. This monitor uses a
low blue light panel, and is certied by TUV to reduce
blue light output and create a more relaxing and less
stimulating image while reading content on the screen.
•Movie: Ideal for movies.
•Game: Ideal for most gaming applications.
•Color Temp: The screen appears warmer with a red/
yellow tint with slider set at 5,000K or cooler with blue
tint with slider set at 10,000K.
•Color Space: Allows users to select the color
space: sRGB, Rec. 709, DCI-P3, Display P3.
•Custom Color: Allows you to manually adjust the color
settings. Press the joystick left and right buttons to
adjust the Red, Green, and Blue values and create your
own preset color mode.
Input Color
Format
Allows you to set the video input mode to:
•RGB: Select this option if your monitor is connected to a
computer or a media player that supports RGB output.
•YCbCr: Select this option if your media player supports
only YCbCr output.
YCbCr
Preset Modes
RGB
Input Color Format
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Hue
Saturation
Reset Color
Audio & Webcam
UltraSharp 32 Monitor
Hue Use Joystick Up or Down to adjust the Hue from 0 to
100.
NOTE: Hue adjustment is available only for Movie and
Game mode.

Operating the monitor | 75
Icon Menu and
Submenus
Description
Saturation Use Joystick Up or Down to adjust the Saturation from
0 to 100.
NOTE: Saturation adjustment is available only for Movie
and Game mode.
Reset Color Resets your monitor’s color settings to the factory
defaults.
Press
to select this function.
Display Use the Display menu to adjust image.
50Sharpness
Normal
Response Time
16:9
Aspect Ratio
Exit
Dell Power Button Sync
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
O
Smart HDR
Reset Display
Audio & Webcam
UltraSharp 32 Monitor
O
Aspect Ratio Adjust the image ratio to 16:9, Auto Resize, 4:3, 1:1.
Sharpness Makes the image look sharper or softer.
Move the joystick up and down to adjust the sharpness
from ‘0’ to ‘100’.
Response Time Allows you to set the Response Time to Normal or
Fast.

76 | Operating the monitor
Icon Menu and
Submenus
Description
Smart HDR
Press
to select these functions.
Smart HDR (High Dynamic Range) automatically
enhances the display output by adjusting the settings
optimally to resemble life-like visuals.
Desktop: This is the default mode. This mode is more
suitable for general usage of the monitor with a desktop
computer.
Movie HDR: Use this mode during playback of HDR
video content to expand the contrast ratio, brightness,
and color palette. It matches the video quality with real life
visuals.
Game HDR: Use this mode when playing games that
support HDR to expand the contrast ratio, brightness, and
color palette. It makes gaming experience more realistic as
intended by game developers.
DisplayHDR: Best used with content that complies with
DisplayHDR standards.
Off: Disables Smart HDR function.
NOTE: The possible peak luminance during HDR mode
is 600-nits (typical). The actual value and duration
during HDR playback might vary accordingly to the video
content.
Dell Power
Button Sync
To allow you to control PC system power state from the
monitor power button.
Allows you to On or Off Dell Power Button Sync
function.
NOTE: This feature is only supported with Dell platform
which has built-in DPBS function, and is only supported
over Thunderbolt interface.
Reset Display Resets all settings under the Display menu to the factory
defaults.
Press
to select this function.

Operating the monitor | 77
Icon Menu and
Submenus
Description
PIP/PBP This function brings up a window displaying image from
another input source.
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
PIP/PBP Mode
O
PIP/PBP (Sub)
Thunderbolt (140W)
USB Switch
Video Swap
Audio
Main
Select √
Select √
Contrast (Sub)
75%
Audio & Webcam
UltraSharp 32 Monitor
Main Window Sub-Window
Thunderbolt
(140W)
mDP HDMI
Thunderbolt
(140W)
√ √
mDP √ √
HDMI √ √
NOTE: The images under PBP will be displayed at the
center of the screen, not full screen.

78 | Operating the monitor
Icon Menu and
Submenus
Description
PIP/PBP Mode Adjusts the PIP or PBP (Picture by Picture) mode.
You can disable this feature by selecting Off.
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
PIP/PBP Mode O
PIP/PBP (Sub)
USB Switch
50% - 50%
Video Swap
Audio
Contrast (Sub)
Audio & Webcam
UltraSharp 32 Monitor

Operating the monitor | 79
Icon Menu and
Submenus
Description
PIP/PBP (Sub) Select between the different video signals that may be
connected to your monitor for the PBP sub-window.
Press the
button to select the PBP sub-window source
signal.
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
PIP/PBP Mode
PIP/PBP (Sub)
USB Switch
Video Swap
Audio
Contrast (Sub)
mDP
Thunderbolt (140W)
HDMI
Audio & Webcam
UltraSharp 32 Monitor
USB Switch Select to switch between the USB upstream sources
in PBP mode. Move the joystick to switch among USB
upstream sources in PBP mode.
Video Swap Select to swap videos between main window and sub-
window in PBP mode. Move the joystick to swap main
window and sub-window.
Audio Allows you to set the audio source from the main window
or the sub-window.
Contrast (Sub) Adjust the Contrast level of the picture in PBP Mode.
Move the Joystick to increase or decrease the contrast.

80 | Operating the monitor
Icon Menu and
Submenus
Description
USB Allows you to set the USB upstream port for the mDP
input signals, thus the monitor’s USB downstream port
(For example, keyboard and mouse) can be used by the
current input signals when you connect a computer to
either one of the upstream ports. When you use only one
upstream port, the connected upstream port is active.
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
mDP assign to
USB-C
HDMI assign to
USB-C
Ethernet Switch Mode
Prompt when KVM switches
Ethernet Switch
Select
√
Show KVM Setup Guide
Select
√
Reset USB
Audio & Webcam
UltraSharp 32 Monitor
NOTE: To prevent data damage or loss, before changing
USB upstream ports, make sure that NO USB storage
devices are in use by the computer connected to the
monitor’s USB upstream port.
Ethernet
Switch Mode
Allows you to set the Ethernet switch mode:
• Tie to KVM: When KVM USB switches, Ethernet
switches together.
• Prompt when KVM switches: When KVM USB
switches, a message prompts user to decide whether to
switch Ethernet together.
• Switch Manually: When KVM USB switches, Ethernet
does not switch.
Ethernet
Switch
Manually switch Ethernet.
Show KVM
Setup Guide
Select this option and follow steps if you want to connect
multiple computers to the monitor and use one setup of
keyboard and mouse.
Reset USB
Resets all settings under the USB menu to the factory
defaults.

Operating the monitor | 81
Icon Menu and
Submenus
Description
Audio & Webcam
Use the Audio Settings menu to adjust the audio settings.
Exit
UltraSharp 32 Monitor
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
Reset Audio & Webcam
Speaker
Unmute
Microphone
Unmute
Webcam & Presence Sensor
Enable
Audio Proles
Standard
Volume
50
Volume Allows you to increase the speaker volume.
Move the joystick up and down to adjust the volume from
‘0’ to ‘100’.
Speaker Select On or Off the Speaker function.
Microphone Select Mute or Unmute the Microphone function.
Webcam &
Presence
Sensor
Select Enable or Disable the Webcam and Presence
Sensor function.
NOTE: Disabling “webcam & presence sensor” will turn
off the whole webcam module, webcam and sensor will
not appear in the system. “Camera disable” button will not
work as well.
Camera disable button at the front is used to lock and
unlock shutter.
Audio Profiles Expand to show the various audio profiles.
•Standard: Default audio setting.
•Voice: Emphasize on speech, ideal for voice and video
calls.
•Movie: Emphasizes voice and low frequency sound, for
more immersive video viewing experience.
•Gaming: Boosting low and high frequencies, for an
improved sense of space and orientation in gaming.
•Music: Provides a at EQ prole, for faithful music
reproduction.
Reset Audio &
Webcam
Resets all settings under the Audio and Webcam menu
to the factory preset values.

82 | Operating the monitor
Icon Menu and
Submenus
Description
Menu Select this option to adjust the settings of the OSD, such
as the languages of the OSD, the amount of time the
menu remains on screen, and so on.
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
English
Language
Audio & Webcam
UltraSharp 32 Monitor
Reset Menu
20s
Timer
Disable
Lock
20
Transparency
Language Set the OSD display to one of eight languages.
(English, Spanish, French, German, Brazilian Portuguese,
Russian, Simplified Chinese, or Japanese).
Transparency Select this option to change the menu transparency by
moving the Joystick up or down (Range: 0 - 100).
Timer OSD Hold Time: Sets the length of time the OSD
remains active after you press a button.
Move the joystick to adjust the slider in 1-second
increments, from 5 to 60 seconds.

Operating the monitor | 83
Icon Menu and
Submenus
Description
Lock With the control buttons on the monitor locked,
you can prevent people from accessing the
controls. It also prevents accidental activation
in multiple monitors side-by-side setup.
Power Button
Menu + Power Buttons
Disable
Menu Buttons
Reset Menu
Timer
Lock
Transparency
Language
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
UltraSharp 32 Monitor
•Menu Buttons: Through OSD to lock the Menu
buttons.
•Power Button: Through OSD to lock the Power button.
•Menu + Power Buttons: Through OSD to lock all Menu
and Power buttons.
•Disable: Move the Joystick left and hold for 4 seconds.
Reset Menu Resets all settings under the Reset Menu to the factory
defaults.
Press
to select this function.

84 | Operating the monitor
Icon Menu and
Submenus
Description
Personalize
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Shortcut Key 1
USB Switch
Shortcut Key 2
Input Source
Shortcut Key 3
Preset Modes
Reset Personalization
Power Button LED
On in On Mode
Fast Wakeup
O
Other USB Charging
O in Standby Mode
Thunderbolt Charging 140W
O in O Mode
Shortcut Key 4
Brightness/Contrast
Shortcut Key 5
PIP/PBP Mode
Audio & Webcam
UltraSharp 32 Monitor
Shortcut key 1 Select from Preset Modes, Brightness/Contrast,
Input Source, Aspect Ratio, PIP/PBP Mode, USB
Switch, Ethernet Switch, Video Swap, Volume,
Smart HDR, Display Info, Webcam & Presence
Sensor, Speaker, Microphone, Audio Profiles set as
shortcut key.
Shortcut key 2
Shortcut key 3
Shortcut key 4
Shortcut key 5
Power Button
LED
Allows you to set the state of the power light to save
energy.
Thunderbolt
Charging
(140W)
Allows you to enable or disable Thunderbolt Charging
(140W) charging function during monitor power off
mode.
NOTE: When this function is enabled, you will be able
to charge your notebook or mobile devices through the
USB-C cable even when the monitor is powered Off.
Other USB
Charging
Allows you to enable or disable Other USB Charging
function during monitor Standby mode.
NOTE: When this function is enabled, you will be able to
charge your mobile phone through the USB-A cable even
when the monitor is in standby mode.
Fast Wakeup Speed up recovery time from sleep mode.
Reset
Persona-
lization
Resets all settings under the Personalize to the factory
defaults.
Press
to select this function.

Operating the monitor | 85
Icon Menu and
Submenus
Description
Others Select this option to adjust the OSD settings suchas the
DDC/CI, LCD conditioning, and so on.
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Display Info
Reset Others
Factory Reset
Firmware 00X000
Service Tag ABCDEFG
DDC/CI On
LCD Conditioning O
ENERGY STAR
®
Select
√
Self-Diagnostic Select
√
Audio & Webcam
UltraSharp 32 Monitor
Display Info Displays the monitor’s current settings.
Press to select this function.
UltraSharp 32 Monitor
Input Source:
Resolution:
Input Capability:
Stream Info:
USB Upstream:
Ethernet:
mDP
6144x3456,60Hz 30 -bit
Thunderbolt (140W)
DP 2.1
HDMI 2.1
8.1Gbps DSC
Thunderbolt (140W)
USB-C
Model:
Firmware:
Service Tag:
U3224KB
12T113
ABCDEFG

86 | Operating the monitor
Icon Menu and
Submenus
Description
DDC/CI DDC/CI (Display Data Channel/Command Interface)
allows your monitor parameters (brightness, color
balance, etc.) to be adjustable via the software on your
computer. You can disable this feature by selecting Off.
Enable this feature for best user experience and optimum
performance of your monitor.
LCD Conditioning O
DDC/CI On
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Display Info
Firmware
Reset Others
Factory Reset
Self-Diagnostic
Service Tag
Audio & Webcam
UltraSharp 32 Monitor

Operating the monitor | 87
Icon Menu and
Submenus
Description
LCD
Conditioning
Helps reduce minor cases of image retention. Depending
on the degree of image retention, the program may take
some time to run. You can enable this feature by selecting
On.
Exit
Display Info
O
Firmware
OnLCD Conditioning
DDC/CIInput Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Reset Others
Factory Reset
Self-Diagnostic
Service Tag
Audio & Webcam
UltraSharp 32 Monitor
Firmware Displays the Firmware version of your monitor.
Service Tag Displays the Service Tag. The Service Tag is a unique
alphanumeric identifier that allows Dell to identify the
product specifications and access warranty information.
NOTE: The Service Tag is also printed on a label located
at the back of the cover.
Self-Diagnostic Use this option to run the built-in diagnostics, see Built-in
Diagnostics.
Reset Others Resets all settings under the Others menu to the factory
defaults.
Press
to select this function.
Factory Reset Restores all preset values to the factory default settings.
These are also the settings for ENERGY STAR
®
tests.

88 | Operating the monitor
Using the OSD lock function
You can lock the front-panel control buttons to prevent access to the OSD menu and/
or power button.
Use the Lock menu to lock the button(s).
1. Select one of the following options.
Power Button
Menu + Power Buttons
Disable
Menu Buttons
Reset Menu
Timer
Lock
Transparency
Language
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
UltraSharp 32 Monitor
2. The following message appears.
Are you sure you want to lock the Menu Buttons?
To unlock the Button, refer to the User’s Guide.
Yes
No
3. Select Yes to lock buttons. Once locked, pressing any control button will display
the lock icon
.

Operating the monitor | 89
Use the Joystick to lock the button(s).
Press the left directional navigation of Joystick for four seconds, a menu appears on
the screen.
Select Option:
Select one of the following options:
Options Description
1
Menu Button lock
Select this option to lock OSD menu function.
2
Power Button lock
Use this option to lock power button. This will
prevent the user to turn off the monitor using the
power button.
3
Menu and Power Button lock
Use this option to lock OSD menu and power
button to turn off the monitor.

90 | Operating the monitor
To unlock the button(s).
Press the left directional navigation of Joystick for four seconds until a menu appears
on the screen. The following table describes the options to unlock the front-panel
control buttons.
Select Option:
Options Description
1
Menu Button unlock
Use this option to unlock OSD menu function.
2
Power Button unlock
Use this option to unlock power button to turn off
the monitor.
3
Menu and Power Button
unlock
Use this option to unlock OSD menu and power
button to turn off the monitor.

Operating the monitor | 91
Initial Setup
When you select OSD items of Factory Reset in Other feature, the following message
will appear:
Are you sure you want to reset to default settings?
Yes
No
When you select Yes to reset to default settings, the following message will appear:
32 Monitor
Select ‘Yes’ to enable the following function(s):
.
Always on USB-C Charging
.
Other USB Charging
When ‘Yes’ is selected, power consumption
will increase. When ‘No’ is selected, it will comply
with ENERGY STAR requirements.
Individual settings of the functions can be
changed in the Menu.
Yes
No

92 | Operating the monitor
OSD warning messages
When the monitor does not support a particular resolution mode, you can see the
following message:
The current input timing is not supported by the monitor display.
Please change your input timing to 6144x3456, 60Hz or any other
monitor listed timing as per the monitor specications.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor Specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 6144 x 3456.
You can see the following message before the DDC/CI function is disabled:
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
No
When the monitor enters the Standby Mode, the following message will appear:
Going into Standby mode...
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, the following messages will
appear depending on the selected input:
No mDP Signal form your device.
Press any key on the keyboard to wake up.
If there is no display, press the monitor joystick
to select input source.

Operating the monitor | 93
A message is displayed while the cable supporting DP alternate mode is connected to
the monitor under the following conditions:
• When Auto Select for Thunderbolt(140W) is set to Prompt for Multiple
Inputs.
• When the Thunderbolt
TM
cable is connected to the monitor.
Select the primary use of the monitor’s Thunderbolt connection:
Display PC screen while charging
Only charge device
Always display PC screen while charging
If two or more ports are connected, when the Auto of Input Source is selected, it will
turn to the next port with signal.
Exit
mDP HDMI
Thunderbolt (140W)
Auto
Select OSD items of On in Standby Mode in Personalize feature, the following
message will appear:
Changing to this setting ( without
symbol) will increase
power consumption. Do you want to continue?
Yes
No
If adjust the Brightness level above the default level over 75%, the following message
will appear:
Adjusting to this value will increase power consumpiton above the default level.
Do you want to continue?
Yes
No
• When user selects “Yes”, the power message is displayed only once.
• When user select ‘No’, the power warning message will pop-up again.
• The power warning message will appear again only when the user does a Factory
Reset from the OSD menu.

94 | Operating the monitor
If either Thunderbolt (140W) / mDP / HDMI input is selected and the corresponding
cable is not connected, a floating dialog box as shown below appears.
No mDP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
or
No Thunderbolt(140W) Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
or
No HDMI Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
When the USB upstream cable is not connected, and you press the Hookswitch/
Mute button, the following message will appear:
This function is inactive.
To enable, connect your PC to the USB upstream port on the monitor.
NOTE: For the Hookswitch/ Volume down/ Volume up/ Mute buttons to
work, you need to connect the USB upstream cable (Type-A to Type-C or
Thunderbolt
TM
4) from the PC to the monitor.
See Troubleshooting for more information.

Operating the monitor | 95
Setting the maximum resolution
NOTE: The steps may vary slightly depending on the version of Windows you
have.
To set the maximum resolution for the monitor:
In Windows 8.1:
1. For Windows 8.1, select the Desktop tile to switch to classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3.If you have more than one monitor connected, ensure that you select U3224KB.
4. Click the Screen Resolution dropdown list and select 6144 x 3456.
5. Click OK.
In Windows 10 and Windows 11:
1. Right-click on the desktop and click Display Settings.
2. If you have more than one monitor connected, ensure that you select U3224KB.
3. Click the Display Resolution dropdown list and select 6144 x 3456.
4. Click Keep changes.
If you do not see 6144 x 3456 as an option, you must update your graphics driver
to the latest version. Depending on your computer, complete one of the following
procedures:
If you have a Dell desktop or laptop:
• Go to https://www.dell.com/support, enter your service tag, and download
the latest driver for your graphics card.
If you are using a non-Dell computer (laptop or desktop):
• Go to the support site for your computer and download the latest graphic drivers.
• Go to your graphics card website and download the latest graphic drivers.

96 | Operating the monitor
Setting up Windows Hello
In Windows
®
10 / Windows
®
11:
Click Windows start menu, click Settings.
Click Accounts.
Click Sign-in options. You must set up a PIN before you can enroll in Windows Hello.

Operating the monitor | 97
Click Add under PIN enter to Set up a PIN. Enter New PIN and Confirm PIN, and
then click OK.
Once you’ve done that, the options to set up Windows Hello will unlock. Click Set up
under Windows Hello, enter to Windows Hello setup.

98 | Operating the monitor
The following message is displayed, click Get started.
Keep looking directly at your screen and position yourself so that your face is in the
center of the frame that appears on screen. The webcam will then register your face.

Operating the monitor | 99
When the following message is displayed, click Close to exit Windows Hello setup.
Once you have set up, you have another option to improve the recognition. Click
Improve recognition if necessary.

100 | Operating the monitor
Setting up the monitor webcam as default setting
When using a notebook with built-in webcam to connect this monitor, in the device
manager interface, you can find the notebook built-in webcam and the monitor
webcam. Normally, they are in enable status, and the default setting is using notebook
built-in webcam.
U3224KB

Operating the monitor | 101
If you want to set up the monitor webcam as default setting, you need disable the
notebook built-in webcam. To identify the notebook built-in webcam and disable it,
please follow below instructions:
Right-click Dell Monitor IR Webcam, and click Properties to open the Dell Monitor
IR Webcam Properties.
U3224KB
U3224KB
U3224KB

102 | Operating the monitor
Click Details > Property and select Hardware Ids.
U3224KB
U3224KB

Operating the monitor | 103
The Value will show the detail hardware ids of this Dell Monitor IR Webcam. The
hardware ids of the notebook built-in webcam and the monitor webcam are different.
For U3224KB, the monitor webcam hardware ids will show as below:
U3224KB
U3224KB
Right click the PC/Notebook webcam which has different hardware ids, and then
click Disable.
U3224KB
4

104 | Operating the monitor
The following message is displayed:
Click Yes. The notebook webcam is now disabled, and the monitor webcam will be
used as the default setting. Restart the notebook.
U3224KB

Operating the monitor | 105
Setting up the monitor speaker as default setting
When your computer connects multiple speakers, if you want to set up the monitor
speaker as default setting, please follow below instructions:
Right-click Volume in the Windows task bar notification area.
Click Playback devices enter to Sound setting interface.
U3224KB
U3224KB
If only the HDMI or mDP cable is connected from your monitor to the computer, only
one speaker named DELL U3224KB from the monitor will show in the Sound setting
interface.
U3224KB

106 | Operating the monitor
Click DELL U3224KB, and then click Set Default, the monitor speaker will be used as
the default setting.
U3224KB
Click OK to exit the Sound setting.
U3224KB
If the USB cable and the HDMI or mDP cable are connected from monitor to
the computer, two audio paths named DELL U3224KB and Echo Cancelling
Speakerphone U3224KB from the monitor will show in the Sound setting interface.
The U3224KB monitor would show options for two audio paths supported in the
monitor.

Operating the monitor | 107
• Echo Cancelling Speakerphone audio path is where audio streams through
USB. This is either through USB-C to USB-C cable or USB-A to USB-C cable. As
the microphone path streams from monitor back to PC through USB, this selection
is required for VolP/UC conference applications. Audio Recording and Playback will
work under this selection.
• DELL U3224KB audio path is where audio streams through HDMI/mDP alternate
mode. Under this selection, there will not be microphone support. This selection is
suitable for Audio Playback only.
Audio Playback performance would be the same for either audio path selection. Under
normal Playback with USB-C to USB-C/USB-A to USB-C and/or for UC conference
applications, default selecting the Echo Cancelling Speakerphone audio path is
recommended.
NOTE: If you select DELL U3224KB audio path, please ensure that the Echo
Cancelling Speakerphone volume is set to medium or high. Else, the DELL
U3224KB maximum volume may sound soft because it is limited by the Echo
Cancelling Speakerphone volume. For example, when the Echo Cancelling
Speakerphone volume is at 50%, and the DELL U3224KB volume is set to 100%
will have the same sound level as the former.
U3224KB
U3224KB

108 | Troubleshooting
Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
Self-test
Your monitor provides a self-test feature that allows you to check whether your
monitor is functioning properly. If your monitor and computer are properly connected
but the monitor screen remains dark, run the monitor self-test by performing the
following steps:
1. Turn o both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test
operation, remove all digital and the analog cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background), if the
monitor cannot sense a video signal and is working correctly. While in self-test mode,
the power LED remains white. Also, depending upon the selected input, one of the
dialogs shown below will continuously scroll through the screen.
No mDP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
or
No Thunderbolt(140W) Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U3224KB
4. This message also appears during normal system operation if the video cable is
disconnected or damaged.
5. Turn o your monitor and reconnect the video cable; then turn on both your
computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your
video controller and computer, because your monitor is functioning properly.

Troubleshooting | 109
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen
abnormality you are experiencing is an inherent problem with your monitor, or with your
computer and video card.
Exit
UltraSharp 32 Monitor
Display Info
Reset Others
Factory Reset
Firmware 12T106
Service Tag ABCDEFG
DDC/CI On
LCD Conditioning
O
ENERGY STAR
®
Select
√
Self-Diagnostic Select √
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Press and hold Up or Down or Left or Right direction for four seconds until a
menu appears on the screen.
3. Using the joystick control, highlight the Diagnostics
option and press the
joystick button to start the diagnostics. A gray screen is displayed.
4. Observe if the screen has any defects or abnormalities.
5. Toggle the joystick once again until a red screen is displayed.
6. Observe if the screen has any defects or abnormalities.
7. Repeat steps 5 and 6 until the screen displays green, blue, black, and white
colors. Note any abnormalities or defects.
The test is complete when a text screen is displayed. To exit, toggle the joystick control
again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool,
the monitor is functioning properly. Check the video card and computer.

110 | Troubleshooting
Common Problems
The following table contains general information about common monitor problems you
might encounter and the possible solutions:
Common
Symptoms
What you
experience
Possible solutions
No Video/
Power LED off
No picture •Ensure that the video cable connecting
the monitor and the computer is properly
connected and secure.
•Verify that the power outlet is functioning
properly using any other electrical
equipment.
•Ensure that the power button is depressed
fully.
•Ensure that the correct input source is
selected in the Input Source menu.
No Video/
Power LED on
No picture or no
brightness
•Increase brightness and contrast controls
via OSD.
•Perform monitor self-test feature check.
•Check for bent or broken pins in the video
cable connector.
•Run the built-in diagnostics.
•Ensure that the correct input source is
selected in the Input Source menu.
Missing Pixels LCD screen has
spots
•Cyclepoweron-off.
•Pixel that is permanently o is a natural
defect that can occur in LCD technology.
•FormoreinformationonDellMonitor
Quality and Pixel Policy, see Dell Support
site at:
https://www.dell.com/
pixelguidelines.
Stuck-on Pixels LCD screen has
bright spots
•Cyclepoweron-off.
•Pixel that is permanently o is a natural
defect that can occur in LCD technology.
•FormoreinformationonDellMonitor
Quality and Pixel Policy, see Dell Support
site at:
https://www.dell.com/
pixelguidelines.

Troubleshooting | 111
Common
Symptoms
What you
experience
Possible solutions
Brightness
Problems
Picture too dim or
too bright
•Reset the monitor to factory settings.
•Adjust brightness and contrast controls via
OSD.
Safety Related
Issues
Visible signs of
smoke or sparks
•Do not perform any troubleshooting steps.
•Contact Dell immediately.
Intermittent
Problems
Monitor
malfunctions on &
off
•Ensure that the video cable connecting
the monitor to the computer is connected
properly and is secure.
•Resetthemonitortofactorysettings.
•Perform monitor self-test feature check
to determine if the intermittent problem
occurs in self-test mode.
Missing Color Picture missing color •Perform monitor self-test.
•Ensure that the video cable connecting
the monitor to the computer is connected
properly and is secure.
•Check for bent or broken pins in the video
cable connector.
Wrong Color Picture color not
good
•Change the settings of the Preset Modes
in the Color menu OSD depending on the
application.
•Adjust R/G/B value under Custom Color in
Color menu OSD.
•Change the Input Color Format to PC RGB
or YPbPr in the Color menu OSD.
•Run the built-in diagnostics.
Image retention
from a static
image left on
the monitor for
a long period of
time
Faint shadow from
the static image
displayed appears on
the screen
•Set the screen to turn o after a few
minutes of screen idle time. These can be
adjusted in Windows Power Options or Mac
Energy Saver setting.
•Alternatively, use a dynamically changing
screensaver.

112 | Troubleshooting
Common
Symptoms
What you
experience
Possible solutions
Mic/Webcam
does not work
•USB cable not
plugged in or
correct USB source
not selected
•Monitor Mic/
webcam is not
set as the default
device
•Plug in the USB Cable (Type-A to Type-C or
Thunderbolt
TM
4), and if you connect both
USB-C port, please switch the USB source
in the OSD menu.
•Select the monitor Mic/webcam as the
default in the PC side.
•Touch the Mic button and make sure the
Mic mute LED is dark.
TBT cannot
display
TBT out port
connect the 2nd
Monitor cannot
display but the
display setting can
recognize 2 monitor
•Open the display setting in NB/PC,if you
can see both monitor,then you can reduce
the 2nd Monitor resolution.
•Open OSD in Monitor,Go to OSD menu,
under Input Source selection, press and
hold TBT select joystick key for 8 seconds
to change the monitor setting from HBR3
to HBR2.
Webcam Video
flickering
Experience a visible
webcam video
flickering
•In some situations, you may experience
a visible webcam video flickering that
is caused by interference from some
conventional uorescent lamps.
•If you experience this issue, please
download Dell Peripheral Manager (for
PC) / Dell Display & Peripheral Manager
(for Mac) software. In Dell Display &
Peripheral Manager / Dell Peripheral
Manager, go to “Color and Image > Anti
Flicker” and select the frequency option,
50Hz or 60Hz, that presents no ickering.
•You can also adjust the tilt or placement
of the webcam away from any uorescent
lamp.
Power DVD
can’t play
normally when
using mDP
port
Connect mDP cable
with source and
monitor, play power
DVD, and power
DVD can’t play and
display error
•Go to OSD menu under input source
selection, press and hold mDP joystick
middle key for 8 seconds to switch DP1.4.

Troubleshooting | 113
Common
Symptoms
What you
experience
Possible solutions
The monitor
cannot detect
signal connect
with dock after
AC/DC Off/On,
cable uplug/
Plug
Connect the Dock
USB-C cable to
platform. Connect
DUT with TBT4
cable to the Dock
USB-C port. The
monitor cannot
detect the signal
after AC Off/On
TBT4 cable Unplug/
Plug
•Connect the monitor directly with platform.
•Change the TBT4 cable to USB-C cable.
Cannot achieve
6144x3456
@ 60 Hz on
both U3224KB
monitors when
daisy chained
via Thunderbolt
Connect 1st DUT
with TBT4 cable
to the platform.
Connect 2nd DUT
to the 1st DUT
Thunderbolt
TM
out port with
TBT4 cable. The
2nd monitor
or 1st monitor
can’t achieve
6144*3456@60hz
•Check if your PC graphics card supports
Display Stream Compression (DSC). If DSC
is not supported, the monitors will not be
able to display 2x 6k@60Hz in TBT daisy
chain conguration.
•If DSC is supported, go to the monitor OSD
menu. Under Input Source selection, press
and hold TBT select for 8 seconds using
joystick key, to change the monitor setting
from HBR3 to HBR2. This has to be done
on both Monitors.
2nd monitor
shows black
screen when
TBT daisy chain
and enable
SmartHDR
on both OSD
and Windows
display setting
Connect 1st DUT
with TBT4 cable
to the platform.
Connect 2nd DUT
to the 1st DUT
Thunderbolt
TM
out port with
TBT4 cable. Set
both DUT to the
maximum resolution
(6144x3456). Enable
SmartHDR on both
OSD and Windows
display setting. 2nd
monitor shows black
screen
•Intel UHD graphic limitation, suggest use
Intel Iris graphic.
•Disable SmartHDR on both OSD and
Windows display setting.

114 | Troubleshooting
Common
Symptoms
What you
experience
Possible solutions
The monitor
cannot detect
signal on
mDP after
video cable
unplug/plug,
sleep/wake,
hibernate/wake
Connect mDP cable
with source and
monitor, the monitor
can’t detect signal
•Go to OSD menu under input source
selection, press and hold mDP joystick
middle key for 8 seconds to switch DP1.4.
Platform hangs
on mDP when
wake up the
platform from
sleep
Connect DUT with
mDP cable to the
platform. Do a
Platform Sleep/
Wake. Platform will
hang
•If your platform is DP1.4 graphic card and
suggest to go to OSD menu under input
source selection, press and hold mDP
joystick middle key for 8 seconds to switch
DP1.4.
Auto source
can’t
automatically
switch to mDP
input source
when you
connect the
mDP cable to
platform
When you connect
the HDMI cable
and mDP cable to
monitor, connect
HDMI cable to
platform and
display normally,
then connect mDP
cable to platform.
The signal can’t
automatically to
mDP signal
•Unplug and plug the mDP cable from
monitor side.
•Go to OSD menu and enter input source
select mDP manually.

Troubleshooting | 115
Product specific problems
Problem What you
experience
Possible solutions
Screen image is
too small
Image is
centered on
screen, but does
not fill entire
viewing area
•Check the Aspect Ratio setting in the Display
menu OSD.
•Reset the monitor to factory settings.
Cannot adjust
the monitor
with the
joystick control
on the rear of
the monitor
OSD does not
appear on the
screen
•Turn o the monitor, unplug the monitor
power cable, plug it back, and then turn on the
monitor.
No Input Signal
when user
controls are
pressed
No picture, the
LED light is
white
•Check the signal source. Ensure the computer
is not in the power saving mode by moving the
mouse or pressing any key on the keyboard.
•Check whether the signal cable is plugged
in properly. Connect the signal cable again, if
necessary.
•Reset the computer or video player.
The picture
does not fill the
entire screen
The picture
cannot fill the
height or width
of the screen
•Due to dierent video formats (aspect ratio) of
DVDs, the monitor may display in full screen.
•Run the built-in diagnostics.
No image
when using DP
connection to
the PC
Blank screen •Verify which DP standard is your Graphics Card
certied to. Download and install the latest
graphics card driver.
•Some DP 1.4 graphics card cannot support DP
2.1 monitors. Go to OSD menu, under Input
Source selection, press and hold mDP select
joystick key for 8 seconds to change the
monitor setting from DP 2.1 to DP 1.4.

116 | Troubleshooting
Problem What you
experience
Possible solutions
No image
when using
Thunderbolt
TM
4 connection
to computer,
laptop, and so
on
Blank screen •Verify if the Thunderbolt
TM
4 interface of the
device can support DP alternate mode.
•Verify if the device required more than EPR
140W power charging.
•Thunderbolt
TM
4 interface of device cannot
support DP alternate mode.
•Set Windows to Projection mode.
•Ensure that the Thunderbolt
TM
4 cable is not
damaged.
No charging
when using
Thunderbolt
TM
4 connection
to computer,
laptop, and so
on
No charging •Verify if the device can support one of 5 V/9
V/15 V/20 V/28 V charging proles.
•Verify if the Notebook requires a >EPR 140W
power adaptor.
•If the Notebook requires a >EPR 140W
power adaptor, it may not charge with the
Thunderbolt
TM
4 connection.
•Ensure that you use only Dell approved adapter
or the adapter that comes with the product.
•Ensure that the Thunderbolt
TM
4 cable is not
damaged.
Intermittent
charging
when using
Thunderbolt
TM
4 connection to
computer,
laptop, and so
on
Intermittent
charging
•Check if the maximum power consumption of
device is over EPR 140W.
•Ensure that you use only Dell approved adapter
or the adapter that comes with the product.
•Ensure that the Thunderbolt
TM
4 cable is not
damaged.
No image when
using TBT
Blank screen or
2nd DUT is not
Prime mode
•Thunderbolt
TM
4 input, Go to OSD menu,
under Input Source selection, press and hold
Thunderbolt(140W) select joystick key for 8
seconds to change the monitor setting from
HBR3 to HBR2. The two monitor need do this
setting.
No network
connection
Network
dropped or
Intermittent
•Do not toggle O/On the power button when
network is connected, keeps the power button
On.

Troubleshooting | 117
Problem What you
experience
Possible solutions
The LAN port is
not functioning
OS setting or
cable connection
issue
•Ensure that the latest BIOS and drivers for your
computer are installed on your computer.
•Ensure that the RealTek 2.5G Ethernet
Controller is installed in the Windows Device
Manager.
•If your BIOS Setup has a LAN/GBE Enabled/
Disabled option, make sure it is set to Enabled.
•Ensure that the Ethernet cable is connected
securely on the monitor and the hub/router/
rewall.
•Check the status LED of the Ethernet cable to
conrm connectivity. Re-connect both ends of
the Ethernet cable if the LED is not lit.
•First power o the Computer and unplug the
Thunderbolt
TM
4 cable and power cord of the
monitor. Then, power on the computer, plug in
the monitor power cord and Thunderbolt
TM
4
cable.
Monitor
buttons (Mute
/ Volume down
/ Volume up /
Hookswitch)
not working
with Microsoft
Teams
®
App
Monitor
buttons (Mute
/ Volume down
/ Volume up /
Hookswitch)
not working
on Microsoft
Teams
®
App
with Chrome OS
/ Ubuntu
Use Microsoft Teams
®
App to perform the below
tasks:
•Call Icon to accept / hang up call
•Volume down / Volume up adjustment
•Mic mute / unmute
•Video on / o
Video recording
not working
Video recording
App not working
with Win 7
•Windows 7 not support
•Switch to Windows 10 / Windows 11

118 | Troubleshooting
Problem What you
experience
Possible solutions
When press
either Volume
down / Volume
up or Mute
button, LED
does not blink
When press
either Volume
down / Volume
up or Mute
button, LED
not blink when
connected to
HDMI or DP only
Connect USB-A to USB-C cable
Webcam or Mic
not working
Webcam or Mic
not working
when connected
to HDMI or DP
only
Connect USB-A to USB-C cable
Ethernet port
(RJ45) cannot
connect to
internet
Ethernet port
(RJ45) cannot
connect to
internet on Win
10 / Win 11
Change the LAN Controller Power Saving from
Enable to Disable
No sound
coming from
the speakers
No sound
coming from the
speakers when
play audio/video
on your system
•Ensure that you have set the default playback
device as Echo Cancelling Speakerphone
U3224KB or DELL U3224KB on your system.
•Turn O the monitor, unplug the monitor power
cord, replug it, and then turn on the monitor.
•Reset the monitor to Factory Settings.
Speaker volume
is low / sounds
soft
Speaker volume
is low / sounds
soft when
speaker option is
DELL U3224KB
in Sound setting
interface
•Increase the speaker volume of DELL U3224KB
to maximum in the Sound setting interface
•Press the Volume Up button to increase the
speaker volume of DELL U3224KB
•If you select DELL U3224KB audio path,
please ensure that the Echo Cancelling
Speakerphone volume is set to medium or
high. Else, the DELL U3224KB maximum
volume may sound soft because it is limited
by the Echo Cancelling Speakerphone
volume. For example, when the Echo Cancelling
Speakerphone volume is at 50%, and the DELL
U3224KB volume is set to 100% will have the
same sound level as the former.

Troubleshooting | 119
Problem What you
experience
Possible solutions
Webcam is not
detected
Webcam is not
detected in the
Windows Device
Manager
•Ensure that the USB upstream cable is
connected between the monitor and the
computer or notebook.
•Ensure that the USB is assigned to the port to
which the USB cable is plugged in to.
•Reconnect the USB upstream cable to the
computer or notebook.
Webcam
cannot connect
/ Webcam
disconnected
Could not detect
Monitor camera
/ Could not
switch back to
the PC camera
•Reset the monitor to Factory Settings.
•Turn O the monitor, unplug the monitor power
cord, replug it, and then turn On the monitor.
•Select the Monitor camera again in the
Camera / Video setting of your UC conference
application.
Microphone is
muted
Microphone is
muted in the
Windows Device
Manager
•Ensure that the USB upstream cable is
connected between the monitor and the
computer or notebook.
•Ensure that the USB is assigned to the port to
which the USB cable is plugged in to.
•Reconnect the USB upstream cable to the
computer or notebook.
•Ensure that the microphone is enabled/
unmuted on the monitor. If the microphone
mute LED is lighting up in static red (indicates
microphone muted), press the microphone
button to unmute the microphone.
•Ensure that the monitor’s microphone is
selected and enabled/unmuted on the setting in
the UC application.

120 | Troubleshooting
Problem What you
experience
Possible solutions
Microphone
volume is low /
sounds soft
Microphone
volume is low
/ sounds soft
to the other
participant when
in audio/video
call
•Ensure the Mute button’s LED will go dark
(indicates microphone unmuted).
•Adjust the distance between the user and
the microphone. The user should avoid sitting
too far away from the microphone. The most
optimum distance between the user and the
microphone is 70 cm.
•Ensure that the monitor’s microphone is
selected and enabled/unmuted on the setting in
the UC application.
•Increase the microphone volume in the Sound
setting interface at the PC side / in the UC
application.
Front buttons
don’t work
No response
on the UC
application when
press on the
buttons located
on the speaker
•Ensure that the USB upstream cable (Type-A to
Type-C or Thunderbolt
TM
4) is connected from
the PC to the monitor.
•Ensure that the USB is assigned to the port to
which the USB cable is plugged in to.
•For some UC platforms / applications, the Mute
function works by pressing the Mute button,
but the Mute Icon on the UC platform is not
sync (Icon shows unmute).
Webcam image
looks over-
exposed
Webcam
image shows
over-exposed
background
•Adjust the environment lighting condition.
•Ensure the monitor is setup at a well-lighted
environment, preferably under ceiling lights. The
user should avoid a dim / dark background. The
user should avoid direct facing a window with
bright sunlight.
•Alternatively, you may use Dell Peripheral
Manager to adjust the webcam setting of color.
Webcam image
looks grainy /
dark
Webcam image
appears grainy /
dark
•Adjust the environment lighting condition.
Ensure the monitor is setup at a well lighted
environment, preferably under ceiling lights. The
user should avoid a dim environment.

Troubleshooting | 121
Problem What you
experience
Possible solutions
Webcam image
looks blurry
Webcam image
appears blurry /
not clear.
•Use a clean and slightly damp cloth to wipe the
surface of the front webcam.
•Adjust the distance between the user and the
camera. The user should avoid sitting too far
away from the camera. The most optimum
distance between the user and the camera is
70 cm.
Teams
Microphone
volume
Teams
Microphone
volume is smaller
than Zoom
•This is normal behavior as the volume
specications are dierent between Teams and
Zoom.
Teams/Zoom
small window
distorted
Teams/Zoom
small window
image distorted
•This is normal behavior. The resolution of the
small images are compressed when the main
image is in high resolution (4K). If a lower
resolution (720P & 1080P) is selected, there will
not be any dierence between the images.
Image quality
poor
The image
quality of the
monitor was
poor
Always poor:
•Check that your computer is USB 3.0-capable.
•Some computers have USB 3.0, USB 2.0, and
USB 1.1 ports. Ensure that the correct USB port
is used.
Sometime poor:
•Network will aect the image quality, ensure
your network is ne.
Tof no function Presence
detection/wake-
up not working
•When using Teams/Zoom call, the wake up
function not working is normal.
•It works when a user is not using Teams/Zoom.

122 | Troubleshooting
Microsoft
®
Teams
®
/ Skype for Business
®
specific
problems
Problem What you
experience
Possible solutions
The
Hookswitch
button is not
working
Short press on
the Hookswitch
button does not
answer call
•Ensure that the USB upstream cable (Type-A
to Type-C or Thunderbolt
TM
4) is connected
from the PC to the monitor.
•Ensure that the Teams account is provisioned
/ setup as ‘Teams Only’ mode. The tenant
administrator should enable the account to
‘Teams Only’ mode.
The Mute
button is not
working
Press on the
Mute button
does not mute
and unmute
microphone
•Ensure that the USB upstream cable (Type-A
to Type-C or Thunderbolt
TM
4) is connected
from the PC to the monitor.
•Ensure that the Mute button’s LED will go dark
(indicates microphone unmuted).
•Ensure that the Teams account is provisioned
/ setup as ‘Teams Only’ mode. The tenant
administrator should enable the account to
‘Teams Only’ mode.
Webcam no
image
Webcam no
image when
using Skype for
Business (SfB)
•Ensure that the USB upstream cable (Type-A
to Type-C or Thunderbolt
TM
4) is connected
from the PC to the monitor.
•Select ‘DELL Monitor RGB Webcam’ as the
camera in Skype Video Device setting.
Webcam being
occupied
Webcam being
occupied and
can’t be used
•Avoid running multiple conference applications
at the same time. While you are using
‘conference software A’, close the other
‘conference software B’.

Troubleshooting | 123
Universal Serial Bus (USB) specific problems
Specific
Symptoms
What you
experience
Possible solutions
USB interface is
not working
USB peripherals
are not working
•Check that your display is turned ON.
•Reconnect the upstream cable to your
computer.
•Reconnect the USB peripherals (downstream
connector).
•Turn o the monitor and turn it on again.
•Reboot the computer.
•Certain USB devices such as portable hard
drives require higher power source; connect
the drive to the computer directly.
super speed
USB 3.2 Gen
2 interface is
slow.
super speed
USB 3.2 Gen
2 peripherals
working slowly or
not working at all
•Check that your computer is USB 3.0-capable.
•Some computers have USB 3.0, USB 2.0, and
USB 1.1 ports. Ensure that the correct USB port
is used.
•Reconnect the upstream cable to your
computer.
•Reconnect the USB peripherals (downstream
connector).
•Reboot the computer.
Wireless USB
peripherals stop
working when a
USB 3.0 device
is plugged in
Wireless USB
peripherals
responding
slowly or only
working as
the distance
between itself
and its receiver
decreases
•Increase the distance between the USB 3.0
peripherals and the wireless USB receiver.
•Position your wireless USB receiver as close as
possible to the wireless USB peripherals.
•Use a USB-extender cable to position the
wireless USB receiver as far away as possible
from the USB 3.0 port.

124 | Appendix
Appendix
FCC notices (U.S. only) and other regulatory
information
For FCC notices and other regulatory information, see the regulatory compliance
website located at https://www.dell.com/regulatory_compliance.
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find
contact information on your purchase invoice, packing slip, bill, or Dell
product catalog.
Dell provides several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be available in
your area.
To get online Monitor support content:
See https://www.dell.com/support/monitors.
To contact Dell for sales, technical support, or customer service issues:
1. Go to https://www.dell.com/support.
2. Verify your country or region in the Choose A Country/Region drop-down menu
at the bottom-right corner of the page.
3. Click Contact Us next to the country dropdown.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.
