MADE IN CHINA
FCC ID: 2BCGV0053
80mm
55mm
Front
Back
1. Mode/Light/TWS
2. Previous track / Vol –
3. Power ON/OFF/Play/Pause
/Answer/End/Redial/Reject
call/Channel auto search
4. Next track/ Vol+
5. LED indicator
6. Type-C port
7. TF slot
8. Lamp
Overview
Operation Instructions
Specifications:
1. Model No.: CT02147
2. Item No.: IA12-UQ22102
3. Input: DC 5V/500mA
4. Speaker output power: 5W
5. Battery capacity: 3.7V/500mAh, 1.85Wh
Caution:
1. Please avoid exposing the device to rain or water droplets,
and avoid prolonged exposure to high temperature, high
humidity environments.
3.
During use, please keep it away from heat and high pressure,
and prevent children from playing with this product.
4. Use a power source that meets the specified requirements.
5. Do not drop, bump or apply heavy pressure to the product,
as this may damage it.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)
This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the i
nstructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
1. Power On: Long press the power button to turn on the
speaker. A tone will sound.
2. Pairing: Once speaker is turned on, open your mobile
device, search for wireless devices, and select wireless
ID ‘IA12-UQ22102’, It will pair automatically.
3. Play/Pause: Short press the button to play or pause the
music.
4. Answer/End/Reject/Redial call: When phone call is
incoming, short press the button to answer the call, short
press again to end call, double press the button to reject the
call. Double press the button to redial the number you last
called in wireless mode.
5. Next track/Vol+: Short press to next track, long press to
increase volume.
6. Previous track/Vol -: Short press to last track, long press to
decrease volume.
7. TF card play: Plug the TF card into TF slot, it will
automatically play the music.
8.
Switch FM and wireless mode: Long press the Mode button
9. FM mode: Plug the Type-C cable into Type-C input port,
long press the mode button to enter FM mode, tap the auto
search button to search channel, after the search stop
automatically or tap the button again to end search, short
press the next track and previous track to switch channel.
10. Lamp: Tap the light button repeatedly to cycle through the
different lamp modes.
11. Charging the speaker: Use the included Type-C cable to
connect the speaker to a qualified adaptor. The charging
LED indicator will illuminate red and turn off once fully
charged.
12. TWS function: Turn on both of speaker, double press the
TWS button of either speaker, they will pair together
automatically, then you can pair with your phone and enjoy
the stereo music.
1 2 3 4
5 6 7
8
13. Power Off: Long press the power button to turn off the
speaker.
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
·Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
·Consult the dealer or an experienced radio/TV technician for
help.
RF Statement
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
