65 mm
71 mm
Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade
recording output. Plug and play,no broadcast, video Vlog shooting, program
interview,recording,video teaching and other occasions.
The wireless Microphone consists of two parts, Microphone transmitter
and Receiver.(See as below picture)
Step 1: Connect the receiver to phone, the indicator light flashes
indicator light flashes
slowly
Off: 1.Noise reduction
indicator light goes off
under the noise reduction
off state.
2.Noise reduction
indicator light remain on
under the noise reduction
on state.
Charging:Battery indicator
light remains on
Fully charged: Battery
indicator light off
Via charging cable
Content of packing
For the use of ⑧ port :there is no battery in receiver,and no need to recharge
during live. lf the phone is low power during Live, it can be recharged directly
through ⑧ port
Indicator light always on
Note:oppo/vivo/iqoo/realm brand mobile phones can be used normally
only when they go to the settings search"OTG"-turn on OTG power supply
步骤一:将接收器和手机连接后，指示灯会闪烁. 步骤二:长按话筒电源键，连接指示灯亮表示已连接到话筒。
功能
打开
开机&搜索配对
插入设备
指示灯闪烁
指示灯常亮
指示灯熄灭
配对成功
关机
拔掉设备插头
长按 ⑤ 按键
长按 ⑤ 按键
双击 ⑤ 按键
单击 ⑤ 按键
三击 ⑤ 按键
连接指示灯闪烁
连接指示灯闪烁
连接指示灯熄灭
连接指示灯常亮
开启:静音指示灯常亮
关闭:静音指示灯不亮
开启:降噪指示灯亮
关闭:降噪指示灯熄灭
开启：降噪指示灯慢
闪，亮起。
关闭: 1.在降噪关闭状
态下，降噪指示灯熄
灭。2.在降噪开启状
态下，降噪指示灯亮。
/
/
关闭
搜索配对
电池指示灯闪烁
充电中：电池指示灯
常亮
充满电：电池指示灯
熄灭
/
电池电量过低
通过充电线
充电
配对成功
静音
混响
降噪(默认降噪)
操作方法 LED
功能
操作方法 LED
步骤三:接收器指示灯常亮，打开手机摄像头、直播App或
其他App，然后使用麦克风接收声音。
包装清单内容
（1）麦克风发射器
（2）接收机
（3）充电线
（4）用户手册
麦克风发射器
接收器
使用接收器充电口 ：接收器内不含电池，通电时无需充电。
如果手机在直播期间电量不足，可以通过接收器充电口 直
接充电。
指示灯常亮
电源按钮
注意: oppo/vivo/iqoo/realm 品牌的手机只有进入设置搜
索“OTG”-打开OTG电源才能正常使用
① 防风海绵
麦克风指示灯
麦克风背夹
麦克风充电接口
电源按钮
Type-C插口
接收器指示灯
接收器充电口
②
③
④
⑤
⑥
⑦
⑧
感谢您选择我们的产品。
无线麦克风由两部分组成：麦克风发射器和接收器
（见下图）
麦克风发射器 接收器
本产品为智能无线麦克风，可提供专业级别的录音输出。即
插即用，无需APP。多种用途：可实现网络直播、视频Vlog拍
摄、节目访谈、采访录音、视频教学等场合的使用。
V1.0.0
V1.0.0
无线麦克风
M47
Power button
Introduction
产品介绍
特别注意 特别注意 包装清单
ID图示 使用步骤
ID Diagram How to use
Special Note About UI About UI
Microphone
Receiver
Step 2:Long press power button of microphone, the connect indicator light
remains on means have connected with receiver.
Step 3:The indicator light of receiver keeps always on,then open the
phone camera, live App or other Apps ,and then to use the microphone to
receive sound.
① Windproof sponge
② Microphone indicator light
③ Microphone clip
④ Microphone charging port
⑤ Power button
⑥ Port to connect phone
⑦ Receiver indicator
⑧ Charging port of receiver
Function
Power on
Connect indicator light
flashes
Connect indicator light
off
On: Mute indicator light
remains on
Off: Mute indicator light off
Long press ⑤ button
Long press ⑤ button
/
Power off
Connect indicator light
flashes
Search Pairing
Function
LED
Indicator light flashesPlug in the device
Operation
/
Power on &
Search pairing
Indicator light remains
on
Pairing
Successful
Unplug from device
Indicator light off
Power off
/
Connect indicator light
remains on
Pairing
Successful
/
Battery indicator light
flashes
Low Battery
Charging
Double click ⑤ button
Mute
On: Noise reduction
indicator light remains on
Off: Noise reduction
indicator light off
Single click ⑤ button
Noise Reduction
(Default noise
reduction )
Triple click ⑤ button
Reverb
Operation LED
(1) Microphone transmitter
(2) Receiver
(3) Charging cable
(4) User manual
使用说明书
M47
User Manual
Wireless Microphone
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
