A
20260903
SWXXXXXXXXXXD5
2026/09/03
陈萍
1.名称：D5中性英⽂英⽂说明书
2.材质：128g铜版纸⿊⽩印刷⻛琴折
3.尺⼨：55*55mm
4.印刷字印清晰，不断线、拖笔画不得有重线，杂点等缺陷。
5.尺⼨公差±0.2mm
V0.1
Self-powered Door Contact
INSTRUCTIONS
Door sensor pairs with controller can automatically
turn on the light after sensing that the door is
opened, automatically turn off the light after sensing
the door is closed. Pair it with smart doorbell
gateway for more home smart applications.
Product Description
Power supply: Self-powered
Communication frequency: RF433MHz
Modulation: FSK
Communication distance: 80m outdoor, 25m indoor
Service life: ≥100000times
Operating temperature: -20℃~+55℃
Shell material: PC
Installation method: Double-sided adhesive paste
installation
Specification
1. Press the pairing button on the receiver for about
3 seconds until the indicator light flashes slowly.
2. Press the door sensor once quickly (press and
release within 0.5 seconds) and the indicator light
goes out to indicate successful pairing. When
pairing is complete, the indicator light will be on
when the door is opened and off when it is closed.
Pairing method with controller
1. External installation: Using the screws provided,
mount the door sensor on a flat surface.
2. Embedded installation: Embedding the door
sensors into door frames.
Installation Instructions
1. Cabinet door application
Application Scenarios
Installed on the cabinet door: When you need to
take clothes, open the cabinet door and the cabinet
light strip will automatically turn on; when the
cabinet door is closed, the cabinet light strip will
automatically turn off.
Note: This function needs to be connected to the cabinet light
strip with the controller, and the D5 door sensor can be
matched with the controller.
2. Window application
Installed on the window of the home: When the
window is opened or closed, the window status will be
synchronized to the mobile phone app to realize the
remote real-time view of the window status at home.
Note: This function needs to be implemented with the
doorbell gateway, and the mobile app can use Tuya Smart or
wireless kinetic energy
Dimensions (mm)
CERTIFICATE
INSPECTED
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Note: The Grantee is not responsible for any
changes or modifications not expressly approved
by the party responsible for compliance. such
modifications could void the user's authority to
operate the equipment.
The device has been evaluated to meet general RF
exposure requirement.
To maintain compliance with FCC's RF exposure
guidelines, the distance must be at least 20cm
between the radiator and your body, and fully
supported by the operating and installation
