成品尺寸：宽105*高148mm
公差：+/-1mm
材质：128G铜版纸
折页
1.7L STAINLESS STEEL ELECTRIC KETTLE
MODEL: PE-EK023
User Guide
US FCC Compliance Statements
This device complies with Part 15 of the US FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
WARNING: Please note that changes or modifications of this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
SAFETY INSTRUCTIONS
,
SAVE THE INSTRUCTIONS
HOUSEHOLD USE ONLY
IMPORTANT SAFEGUARDS
r
t,
Thank you for choosing the PE-EK023 1.7L Stainless Steel Electric Kettle. Please
read this manual carefully and store it in a safe place for future reference. If you
have any questions or concerns, please contact our customer support team by
email at support@parisrhone.com.
How to Use
Getting ready: Place the kettle base on an even surface and connect the power
cable. For first-time use, fill the kettle to the maximum water level and fully boil
it, then pour the water away.
1. After the kettle is powered, all of the LED indicators will flash once and the
water level indicator will keep on, the device enters standby mode with a beep
sound. If no operation is detected within 5 minutes, the water level indictor will
also turn off.
2. Press the Set Button once to start setting the temperatures and you will hear
a beep sound. The default temperature setting is 160°F. Once the temperature
is set, press the Start / Stop Button again to start boiling water. The
Start/Stop Button indicator will light up and the temperature indicator will
flash. When the water reaches the target temperature, you will hear 3
“beep-beep” sounds.
3. Press the Set Button to select from 6 different temperature settings. Cycle
through the temperature settings with each press of the Set Button. The
corresponding temperature indicator will light up. Once the maximum or
minimum temperature setting is reached, keep pressing the Set Button will
change the setting.
4. Press the Keep Warm button to keep the water at the preset temperature for
30 minutes once it is reached. After 30 minutes, the kettle automatically
shuts off and enters standby mode. Press again within 30 minutes to disable
the function and the light will turn off.
5. Press the Set Button during boiling to switch the temperature setting. Press
the Keep Warm Button to activate or disable the heat preservation function.
Press the Start / Stop Button to stop boiling.
Note: Do not dry boil. If you do, the kettle will enter protection mode and disable
all buttons and indicators. It will only enter standby mode again after the kettle
is completely cooled off.
Caution
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
2. Do not disassemble the product.
3. Please do not remove the power cable with wet hands as it may cause an electric
shock.
4. Do not use the product to boil milk, coffee, tea, or to cook food.
5. Do not dry boil the kettle.
Lid Release Button
Water Level Indicator
Base
Power Cord
Start / Stop Button
Keep Warm Button
Set Button
6 Temperature Settings:
160°F, 175°F, 185°F, 190°F, 200°F, Boil
Manufacturer: Shenzhen Aspiron Technology Company Limited
Address: Room 1401, Tianlong Mobile Building, Headquarters Base,
Liuxiandong, Nanshan District, Shenzhen, Guangdong, China
CONFORMS TO
ULSTD.1082
①
②
③
④
⑤
⑥
⑦
⑧
Product Diagram
KEEP
WARM
SET
START/STOP
160
o
F
185
o
F
200
o
F
190
o
F
175
o
F
Delicate
Boil
Green
White
Black
Oolong
French Press
①
③
④
⑥
⑦
⑧
⑤
②
0.5L
0.75L
1.0L
1.25L
1.5L
1.7L
MAX
