1.7L STAINLESS STEEL ELECTRIC KETTLE
MODEL: PE-EK024
User Guide
Manufacturer: Shenzhen Aspiron Technology Company Limited
Address: Room 1401, Tianlong Mobile Building, Headquarters Base,
Liuxiandong, Nanshan District, Shenzhen, Guangdong, China
IMPORTANT SAFEGUARDS
Before using the appliance, carefully read this manual.
Keep this manual, the warranty, the receipt, and, if possible, the
original box and internal packaging for future reference.
Electrical Safety
• Always check that the voltage marked on the kettle matches your
household supply before connecting. If not, DO NOT use the kettle
and contact your dealer.
• DO NOT immerse the kettle, power base, cord, or plug in water or
any other liquid.
• DO NOT let the cord hang over the edge of a table or counter, or
touch hot surfaces.
• Always disconnect the kettle from the outlet when not in use, before
cleaning, and when moving the appliance. Allow it to cool before
attaching or removing parts.
• Always switch the power switch to the OFF position before
unplugging the kettle.
• If the power cord is damaged, it must be replaced by the
manufacturer, a service technician, or a qualified person.
Usage Safety
• DO NOT operate the kettle when it is empty. This may damage the
heating element.
• DO NOT overfill the kettle. Boiling water may overflow and cause
burns.
• Always ensure the lid is firmly closed before operation.
• Always ensure the lid is positioned so that steam is directed away
from the handle.
• Never remove the lid while the water is boiling. Steam may cause
burns.
• DO NOT use the kettle with any base other than the one supplied.
• Always place the kettle on a stable, flat, heat-resistant surface.
• DO NOT place the kettle on or near a gas burner, electric burner, or
in a heated oven.
• Always use the handle when moving the kettle. DO NOT touch hot
surfaces.
• Always direct steam away from cabinets, walls, or hands.
• Always pour boiling water slowly and carefully. DO NOT tilt the
kettle too quickly.
• Be careful when refilling the kettle if it is still hot.
KNOWING YOUR KETTLE
Children & Supervision
• This appliance is NOT intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities, or lack
of experience and knowledge, unless supervised or instructed on safe
use.
• Children MUST NOT play with the appliance.
• Always keep the kettle and its cord out of reach of children under 8
years old.
• The kettle may be operated by children aged 8 years and above only
if supervised or instructed in safe use.
• Cleaning and maintenance MUST NOT be carried out by children
unless they are over 8 years old and under supervision.
General Warnings
• Avoid spilling water on the connector.
• DO NOT use accessories not recommended by the manufacturer.
This may cause fire, electric shock, or injury.
• DO NOT use the kettle outdoors or for purposes other than boiling
water.
• DO NOT keep the kettle connected to power continuously if the
room temperature is below 0°C, as this may affect the automatic
thermostat.
• Always take extra care when moving the kettle if it contains hot
water.
• This appliance is intended for household use only, or for similar
applications such as:
- staff kitchens in shops, offices, or workplaces
- domestic housing
- use by hotel or motel guests
- bed & breakfast environments
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Spout
Main body
Base
Temperature down Temperature up
Keep warmON/OFF
Lid
Handle
Water window
Base cover
Specifications
Control Panel
Product Diagram
Model
Operating voltage
Power
Capacity
PE-EK024
120V~ 60Hz
1500W
1.7 (maximum) liters
Control panel
USING YOUR KETTLE
CLEANING AND MAINTENANCE
1. Remove the kettle and all accessories from the box. Take off any
stickers, protective film, or plastic parts.
2. Place the kettle on a flat, stable surface with at least 10 cm of free
space around it. Do not place it in a cabinet or use it outdoors.
3. Before using for the first time, fill the kettle to the MAX mark with
clean water, bring it to a boil, and then discard the water. Repeat once
if necessary.
4. Connect the power cord to a suitable socket. Ensure that the rated
voltage on the kettle (120V~60Hz) matches your local supply.
5. Short power cord instructions:
1) A short cord is provided to reduce the risk of entanglement or
tripping.
2) Longer detachable cords or extension cords may be used with care.
If a longer cord is used:
• The electrical rating must be at least as high as the kettle’s rating.
• The cord must be a grounded 3-wire type.
• Arrange it so it does not hang over the counter where it could be
pulled by children or cause tripping.
Before First Use
Always unplug the kettle before cleaning and wait for it to cool
down.
1. Touch the ON/OFF button. The button light will flash, and the kettle
will boil to 100 °C.
2. Touch the +/- buttons to set the temperature (40 °C/104 °F to 100
°C/212 °F). Touch the ON/OFF button to start heating.
3. Touch the ON/OFF button again or lift the kettle off the base to
stop boiling at any time.
Boil Water
1. Touch the Keep Warm button to heat water to 55 °C/131 °F and
keep warm for 2 hours.
Keep Warm
Standby Mode
After powering on, all indicators light up, and the display shows the
current water temperature, ready for use. If no operation occurs within
3 min, the screen and lights turn off, and the kettle enters sleep mode.
Sleep Mode
When all lights are off, touch any button to wake the kettle and return
to standby mode.
Automatic Power-off
Unless the keep-warm function is enabled, the display turns off
automatically about 3 min after the last operation. In keep-warm
mode, the kettle powers off after about 2 hours.
Boil-dry Protection
If the kettle operates without water, the boil-dry protection
automatically turns it off. Allow it to cool and reset before using again.
Special Features
Intelligent Memory: Lifting the kettle and placing it back will
not interrupt the keep warm mode.
2. Place the kettle on a flat, dry, heat-resistant surface. Plug into a
120V AC outlet. The kettle enters standby mode:
• Temperature display shows current water temperature.
• Four touch buttons light up.
1. Open the lid and fill the kettle with water between the MIN (0.5L)
and MAX (1.7L) marks. Close the lid securely.
HOW TO USE
2. Touch the Keep Warm button first, then set your desired
temperature by touching + or -. The water will heat to the set
temperature and keep warm for 2 hours.
3. The Keep Warm button flashes while in keep warm mode. Press it
again to exit the mode.
Cleaning the Kettle
• Wipe the kettle housing with
a soft, damp cloth. Never use
harsh or abrasive cleaners,
scouring pads, or steel wool,
which can damage the kettle.
• DO NOT immerse the kettle
or base in water or any other
liquids.
Descaling
• Descale the kettle regularly
using a descaling product
suitable for household
appliances.
• Rinse the kettle several
times with clean water after
descaling.
成品尺寸：宽105*高148mm
公差：+/-1mm
材质：128G铜版纸
折页
