• Product Features: 2.4G Remote Control
• Product color: as shown in the sample
Material: Silicone, ABS
• Product process: Liquid soft smooth silicone gel; Remote control surface
• Hand oil
TR686 remote control
TREYI Product Specification
be made from engineering certification Quality confirmation Business confirmation approval
performance parameter
Product weight --g（） product size --mm
Product noise ＜ 65 dB Battery type 602020
discharge time ＞ 2 H battery capacity 180mAH
charging interval 2H Charging method Magnetic attraction (center distance 6.0 mm)
Motor model //// motor speed
/////
charging voltage DC 5V PCB board model
charging current 250mA Pantone Color Number
Sample
working voltage 3.7V soft rubber hardness linear measure
turn-off current ＜ 10uA Relevant certifications MSDS、 UN38.3
classification of waterproof
////
surface temperature
number TR686
edition V1.0
date 2025.6.11
←Press to turn on vibration / Long press to turn off vibration; Press to switch frequencies;
The button light stays on when the device is activated, and flashes once with each press.
←Long press to turn on/off the power; Press to activate/deactivate the function;
After power-on, both functions are set to the maximum frequency by default,
and the button light stays on when the device is activated.
←Press to turn on telescoping / Long press to turn off telescoping;
Press to switch frequencies; The button light stays on when activated,
and flashes once with each press.
Button light: White
If no action is taken after 10 minutes, the device will shut down
automatically.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
