Instruction manual:
This product is a Bluetooth speakers, which is connected and play by wireless Bluetooth mode.
Please be familiar with the steps before using it.
1. Please connect the speakers connection line to the Bluetooth host by inserting 3.5mm audio
line into the round hole of the Bluetooth battery box. The needle should be completely
submerged into the round hole.
2. Turn on the Bluetooth box switch to ON, and the Bluetooth indicator lights (blue) up,
accompanied by a short boot tone. If not, please make sure that there is enough power.
3. When connecting Bluetooth speaker with mobile phone, open Bluetooth mode of mobile
phone, scan device, search “PY-BLNKSPK”, click on the connection, and after successful
connection, there will be beep prompt sound.
4. When the connection is successful, the music will be played by the Bluetooth speakers.
5. After use, please turn off the power switch to OFF.
6. Low power, produce multi-frequency beep sound. At this time, it should stop using and charge
after shutdown.
7. Please use the charging line equipped with this unit for charging. Connect the USB charging
port with output voltage = 5V. Do not use high voltage charging. When charging, the red indicator
lights up. After filling, the red indicator lights out. After filling, unplug the charging line and stop
charging.
8. Usually not used, please keep the Bluetooth host well, put it with the speaker, don't put it in
the hot sun, high temperature, humidity, acid and alkali environment for a long time.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to whic
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
.
h
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other antenna
or transmitter.
