Model “U”represents that the terminal is for ultrasonic welding process.
“X”base on ITT talk dog optional item
Technical Specification
ENGINEERING DEPARTMENT
Prepared by Daboy
28/8/’26
ITT Cannon SZ
Confidential
Model:ACN1-T1B-080-2BK-076A-1AP1
ACN1-T1B-048-2BK-XXXA-1AX1-XXX,
ACN1-T1B-050-2BK-XXXA-1AX1-XXX,
ACN1-T1B-080-2BK-XXXA-1AX1-XXX,
ACN1-T1B-050-2BK-XXXA-1AX1-U-XXX,
ACN1-T1B-080-2BK-XXXA-1AX1-U-XXX,
2
Confidential
ITT TALK DOG OPTIOANL ITEM
3
Confidential
The North American 48A/50A/80A AC charging connector provides a Level 2 charging
solution for North American vehicles
• The connector is available in 3 lengths and can be mechanically fitted to a Level 2 charging system using
standard mounting hardware.
•
The connector is manufactured with a built-in temperature sensor for over temperature protection.
NORTH AMERICAN 48A/80A AC CHARGING CONNECTOR
4
Confidential
• Model Number : ACN1-T1B-080-2BK-076A-1AP1
• Product Type : Charging Connector Assembly
• Compatibility : Single Phase AC
• Rated Voltage (Nominal)240 V； RF:DC3.3-5V
• Rated Current : 48A / 50A/ 80A；RF:1.5mA
• Power Conductor Connection : Crimpled Method
• Insulation Resistance ≥100 ΜΩ
• Rated Drop Resistance : 200 drops
• Insertion/Withdrawal Force : <90N
• Flammability Rating : UL94V-0
Drops performed form 1m height onto concrete surface at 22 °C±8 °C
• Dimensions (Overall) ： 48mm x 34mm x 196mm
• Cable Diameter ：14.5 mm(48A，50A) /19.0mm(80A)
• Cable Length : 2.6 m, 5.5 m, 7.3 m….
• Connector Enclosure Material ：Polycarbonate
• EVSE L/NTerminal Material ： T2 C11000,plating,plating Ag
• EVSE PE Terminal Material ： Brass H62,plating Ag
• EVSE Signal Terminal Material : Brass H62,plating Ag
PERFORMANCE SPECIFICATIONS
MECHANICAL SPECIFICATIONS
5
Confidential
• Temperature Sensor Type : NTC or PT 1000
• Temperature Sensor : NTC 10K 3435 or PT 1000
• UHF transmitter: silicon labs si4010-C2-ATR
• UHF transmitter Frequency: 315MHz
• Ambient Temperature : –40
°C to 50°C (–40°F to 122°F)
• Operating Temperature : -40°C to 105°C (-40°F to 221°F)
• Maximum Elevation : 3,000 m (9,843 ft)
• Operating Humidity Protection Degree : Up to 95% RH, condensing
• Protection degree : IP67
• UV Resistance : per UL746C
ELECTRICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
6
Confidential
Thanks!
FCC statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
