Document Camera
User's Guide
Meaning of Symbols in the Guide
• Symbols for Safety
e documentation and this product use graphical symbols to show how to use this product safely.
e indications and their meaning are as follows. Make sure you understand and respect these caution symbols to avoid injury to persons or property.
Warning
is symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
is symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
• Symbols for General Information
Attention
Indicates information that, if ignored, could cause the product to malfunction or cause damage.
a
Indicates additional information and points which may be useful to know regarding a topic.
s Indicates a page where detailed information regarding a topic can be found.
[Name] Indicates button names for the remote control or the control panel.
Example: [
] button, [Enter] button
Menu Name Indicates the on-screen menu item.
Example:
Select Brightness from the Image menu.
Image - Brightness
Safety Instructions
Read this User's Guide and follow all safety instructions for your document camera. Keep this guide on hand for future reference.
Environmental Precautions
Warning
Do not use or store the document camera or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle. ermal damage, re,
or malfunction may occur.
Do not use or store the document camera outdoors for an extended length of time, or where it may be exposed to rain, water, or excessive humidity. Doing so may
result in re or electric shock.
Do not use or store the document camera where it may be exposed to smoke, steam, corrosive gases, or excessive dust. Fire or electric shock may result.
Do not use or store in locations subject to dust or trash. Doing so may cause the quality of the image to decline, or cause a malfunction or re to occur.
Caution
Do not set up the document camera near high-voltage electrical wires or sources of magnetic elds. is may interfere with correct operation.
Operate in the proper environmental conditions. s "General Specifications" p.55
Do not place or store the document camera where it is accessible to small children. It may drop or tip over, causing personal injury.
Do not place the document camera where it may be exposed to vibration or shock.
Do not use or store in locations subject to high or low temperatures. Also, avoid locations subject to sudden changes in temperature. Sudden changes in temperature
may cause a malfunction to occur.
Remove the batteries from the remote control when storing it.
If the batteries are left in for a long time, liquid may leak from the batteries or other problems may occur.
Electrical Precautions
Warning
Never open any covers on the document camera except as specifically explained in this User's Guide. Never attempt to disassemble or modify the document camera. Refer all
repairs to qualified service technicians. Electrical voltages inside the product can cause fire, electrical shock, or severe injury to occur.
Unplug the AC adapter and power plug from the outlet and refer all repairs to qualified service personnel under the following conditions:
• If smoke, strange odors, or strange noises come from the device
• If liquid or foreign objects get inside the device
• If the device has been dropped or the housing has been damaged
If you continue using the product as it is, it could cause an electric shock, fire, or even damage to eyesight.
Do not try to repair this product yourself.
Place the product near an easily accessible outlet so that the plug can be unplugged immediately when an error occurs.
Do not use a power source with a voltage other than those specified in this User's Guide. Use of a different power source may result in fire or electric shock. If you are not sure of the
power available, contact Epson support or your local power company.
Do not attempt to use any adapter other than the AC adapter and power cord included with the device. Using an improper adapter may cause damage,
overheating, fire, or electric shock.
Be sure to use the AC adapter with the proper voltage indicated in this guide. Use of a different power source may result in fire or electric shock.
Do not pull on the AC adapter cable or place heavy objects on the cable. Doing so may result in fire or electric shock.
Do not subject the AC adapter to excessive force or impacts, such as stepping on it, dropping it, or striking it. Doing so may result in damage that may cause a fire
or electric shock to occur.
Do not spill tea, coffee, juice, or other beverages on the AC adapter or spray it with insecticide. Liquids entering the document camera may cause malfunction, fire,
or electric shock.
If water or other liquids are spilled on the device, turn off the power, unplug the AC adapter from the outlet, and contact Epson support. Continuing to use the
device in this condition may cause a fire or electric shock to occur.
Do not place the AC adapter in a confined space or cover it with a cloth. Doing so could cause the AC adapter to become hot which may cause burns or an
unexpected accident to occur.
Wrapping the power cable around the AC adapter may cause it to disconnect or cause abnormal heat generation. Do not use the device in this condition.
If the AC adapter, power cord, or document camera is damaged, turn the power off, unplug the AC adapter from the electrical outlet, and contact Epson support
for help. Using the damaged device may cause fire or electric shock.
Do not touch the device, the AC adapter, or the plug with wet hands. Otherwise, you may receive an electric shock.
Warning
Check the specifications of the power cord. Using an inappropriate power cord could result in fire or electric shock.
Do not use a power cord that is damaged. Doing so may result in fire or electric shock. Take the following precautions when handling the power cord:
• Do not modify the power cord.
• Do not place heavy objects on the power cord.
• Do not bend, twist or pull the power cord excessively.
• Keep the power cord away from hot electrical appliances.
• Do not tie the power cord to other cables.
If the power cord becomes damaged (the core wire is exposed, the wire is broken wire, and so on), contact Epson support.
Take the following precautions when handling the plug. Failure to comply with these precautions could result in fire or electric shock:
• Do not modify the power plug.
• Do not overload wall outlets, extension cables, or power strips.
• Do not insert the plug into a dusty outlet.
• Insert the plug firmly into the outlet.
• Do not hold the plug with wet hands.
• Do not pull the power cord when disconnecting the plug; always be sure to hold the plug when disconnecting it.
• Use only the specified power supply (AC adapter).
Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock.
Be sure to ground the power plug with a grounding wire or a 3-core power plug. Otherwise, it could result in fire or electric shock. Use the supplied power cord and ground
it on the outlet side.
For power plugs with a grounding wire, be sure to connect this wire before plugging in the power plug. Also, when disconnecting the ground wire, be sure to first disconnect the
power plug from the outlet.
For 3-core power plugs, be sure to plug in to an outlet that provides 3-core grounding.
Caution
Turn off the document camera and unplug it after use. Otherwise, the insulation may deteriorate, which may result in fire.
Make sure the power is turned off, the plug is disconnected from the outlet, and all cables are disconnected before moving the document camera. Otherwise, fire or
electric shock may result.
Installation Precautions
Caution
Do not place the document camera in an unstable location, such as on a shaky table or slanted surface. The document c amera m ay drop or tip over, causing
personal injury. If you use a table, cart, or stand, make sure it is stable and will not fall over.
When using the mounting points under the document camera to secure it to a table, cart, or stand, fasten the two bolts securely but do not overtighten them.
Do not use adhesives.
Do not place the product in the following locations:
• Badly ventilated or narrow places, such as inside a closet or in a bookcase.
• On soft surfaces such as a rug, bedding, blanket, and so on.
• Do not cover the product with a blanket, curtain, or tablecloth.
• Badly ventilated locations such as inside an AV rack or cabinet.
• Locations subject to high temperatures, such as near heating equipment.
Route cables so that they are not a tripping hazard. Otherwise, they could trip someone and cause a fall or injury.
Do not stand on the product or place heavy objects on it. You may fall over resulting in injury or the product may become damaged.
Cleaning Precautions
Warning
Do not place any containers of liquid on top of or near the document camera. Spilling liquid of any kind into the product may result in fire or electric shock.
Do not spill liquid or spray fine mist into the document camera. Liquids entering the document camera may cause malfunction, fire, or electric shock. If you spilled
liquid, turn the power off, unplug the AC adapter from the electrical outlet, and contact Epson support. Using the damaged device may cause fire or electric shock.
Never allow objects of any kind to enter any openings in the document camera. Do not leave objects, especially flammable objects, near the document camera. Doing
so may result in fire or electric shock.
Caution
Use a dry cloth (or, for stubborn stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid, aerosol cleaners, or solvents such as alcohol, thinner or benzine.
Water infiltration or deterioration and breakage of the product housing could result in electric shock.
Be sure that the AC adapter, power plug, and power connector are unplugged from their power outlets, and that all wires are disconnected before cleaning the
product. This avoids electric shock during cleaning.
Usage Precautions
Warning
Do not look into the camera head or LED lamp section after turning on the power. The bright light can damage your eyes. Be especially careful in households with small
children. Also, do not look into the lens through an optical instrument such as a magnifying glass or telescope.
Be sure that no one is looking into the camera head or LED lamp when using the remote control to turn on the product from a distance.
Do not allow small children to use this device. If there is a possibility that a child may use this device, they must be supervised by a parent or guardian.
Battery Precautions
Caution
Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in fire, injury, or corrosion of
the product. When replacing batteries, take the following precautions:
• Do not use batteries of different types or mix old and new batteries.
• Do not use any batteries other than those specified in this User's Guide.
• If the batteries leak, wipe away battery fluid with a cloth and so on, and replace them with new batteries. If fluid gets on your hands, wash them immediately.
• Replace the batteries as soon as they run out.
• Remove the batteries if you will not be using the product for a long period of time.
• Do not expose batteries to heat or flame and do not put them in water.
• Insert batteries so that the polarities (+ and -) are correct.
If battery fluid gets in your eyes, do not rub your eyes. Wash them well with clean water and contact a doctor immediately.
If battery fluid enters your mouth, rinse immediately with plenty of water and contact a doctor immediately.
If battery fluid comes in contact with your skin or clothes, wash with water to prevent possible skin damage.
Keep batteries out of the reach of children. Batteries are a choking hazard and are very dangerous if swallowed. If a battery is swallowed, seek medical attention
immediately.
Do not use any batteries other than those specified in this User's Guide.
Insert batteries so that the polarities (+ and -) are correct. Not doing so may cause leakage, overheating, or explosion.
Be sure to replace both batteries with new ones of the same type. Not doing so may cause leakage, overheating, or explosion.
Remove the batteries if you will not be using the remote control for a long period of time. When a battery runs down, take it out of the remote control
immediately. If a used-up battery is left inside for a long time, gas emitted from the battery may cause leakage, overheating, explosion, or damage to the remote
control.
Do not expose batteries to heat, flame, or water.
Dispose of used batteries according to local regulations.
Meaning of Symbols in the Guide ................... 2
Safety Instructions ..................................... 3
Introduction
Included Items ............................................ 12
Document Camera Parts .................................... 13
Top/Side/Rear................................................ 13
Control Panel ................................................ 14
Shortcut key ............................................... 15
Base...................................................... 16
Remote Control Buttons .................................... 17
Remote Control ............................................... 17
LED Indicators ............................................. 19
Connecting
Connecting the Document Camera to a Projector ............. 21
Connecting Using the HDMI Cable .................................. 21
Connecting to a Projector via Miracast............................... 22
When Using a Computer ......................................... 23
Connecting to a Projector using Software .................... 24
Using Easy Interactive Tools...................................... 24
Using Epson Connect Tool for Document Camera ........................ 25
Projecting
Positioning the Document Camera .......................... 27
Plugging In and Turning On . . . . ............................ 28
Projecting ................................................. 29
Switching the Projected Image .................................... 30
Freezing an Image ............................................. 30
Projecting Small Objects......................................... 30
Displaying Whiteboard Images .................................... 31
Projecting Through a Microscope ................................... 32
Turning Off................................................ 34
Saving Images and Playing a Slideshow or Video
Saving Images ............................................. 36
Saving Videos ............................................. 37
Playing a Slideshow (displaying thumbnail screen) . . . . . . . . . . . 38
Displaying Saved Images or Playing Videos .................. 39
Image Adjustments and Effects
Using the On-screen Menu .................................. 41
On-Screen Menu Table ..................................... 42
Image ..................................................... 42
Miracast .................................................... 43
System ..................................................... 43
Playback Mode ............................................... 45
Contents
9
Solving Problems
Problems and Solutions .................................... 47
Operation Problems............................................ 47
Image Quality Problems ......................................... 47
Problems related to USB Flash Drive................................. 48
Miracast Problems ............................................. 48
Remote Control Problems ........................................ 48
Epson Projector Contact List . . . . ............................ 49
EUROPE.................................................... 49
AFRICA .................................................... 52
MIDDLE EAST................................................ 52
NORTH, CENTRAL AMERICA & CARIBBEAN ISLANDS ...................... 52
SOUTH AMERICA .............................................. 52
ASIA AND OCEANIA (Country/Region) ............................... 53
Appendix
Specifications ............................................. 55
General
Specications
.......................................... 55
List of Supported Resolutions..................................... 57
Zoom
Magnication
and Projection Distance by Image Mode ............... 58
Optional Items ............................................ 59
Safety Standard Compliance Symbols and Descriptions ....... 60
Notice .................................................... 62
FCC Compliance Statement ....................................... 62
Copyrights and Trademarks . . . . ............................ 64
Trademarks .................................................. 64
Contents
10
Introduction
You can use this document camera to capture and project pages from books or other documents, and even three-dimensional objects. You can operate the document
camera from a computer using the included Easy Interactive Tools software, or use the Epson Connect Tool for Document Camera software to connect to a
projector via Miracast.
• Remote control with 2 AA batteries
• Power cord and adapter
• HDMI cable
• USB cable
• Quick Start sheet
• Microscope adapter
Included Items
12
Top/Side/Rear
Name Function
A
Camera head
The built in lens captures a subject and the
image is projected onto the connected device.
B
LED lamp Provides additional light when there is not enough
light on your document.
C
Camera arm Extends or retracts to adjust the height of the camera
head.
Name Function
D
Control panel s "Control Panel" p.14
E
USB Mini-B port
Inputs image signals to a computer connected
with a USB cable.
F
USB-A port Outputs images to image devices such as projectors.
G
Wi-Fi dongle A wireless LAN unit is connected.
H
Security slot
e
security slot is compatible with the Microsaver
security system manufactured by Kensington.
I
Handle, and security ca‐
ble installation point
Hold the handle when moving the document
camera.
You can also attach a security cable to prevent the
document camera from being stolen.
J
Power (DC 5V) port Connects the supplied AC power adapter.
K
HDMI output port Outputs images and audio to a video device that is
compatible with HDMI signals.
L
HDMI input port Inputs signals from a video device or computer that
is compatible with HDMI signals.
Attention
Do not rub the lens with harsh materials or subject it to shock, as it can
be easily damaged. Use a so cloth to gently wipe the lens.
Document Camera Parts
13
Control Panel
Name Function
A
[t] power button Turns the document camera on or
o.
B
Wi-Fi indicator Indicates Wi-Fi connection status.
s "LED Indicators" p.19
C
[ ] button
Darkens the projected image while projecting images
from the document camera.
Lets you return to the previous image during a
slideshow, or lets you rewind during playback of a
video.
D
[ ] button
Zooms out of the image.
E
[Record] button
[
]
Starts and stops video recording.
F
[Capture] button
[
]
Captures still images.
Lets you delete an image or video selected in a
le
list
screen.
Name Function
G
Microphone Captures sound when you record a video.
H
[Menu] button
[
]
Opens and closes the menu.
I
[DC/PC] button
[
]
Lets you switch projected images between live
images from the document camera and images from
a connected computer. Press this during a slideshow
or playback of a video to return to the camera mode.
J
[Freeze/Stop] button
[
]
Freezes live images. Press the button again to resume
projection.
While playing a video, stops the video.
K
[Lamp] button
[
]
Turns the LED on the camera on or o.
L
[ ] button
Lets you switch between the Wi-Fi mode and
USB mode.
M
[ ] button
Brightens the image projected from the document
camera.
Lets you advance to the next image during a
slideshow, or fast-forward during playback of a
video.
N
[AF/ENTER] button
[
]
Focuses on a subject automatically, or when
displaying the menus, selects a highlighted menu.
O
[ ] button
Zooms in on the image.
P
Remote receiver
Receives signals from the remote control.
Document Camera Parts
14
Shortcut key
Some functions can be selected by pressing two buttons simultaneously.
Name Explanation
A
Playback Starts or stops playback of a video.
B
Resolution
Lets you switch between the multiple resolution settings.
Each press of the buttons switches the resolution in the
order shown below.
3840×2160 @ 60
3840×2160 @ 30
1920×1080
1280×720
1024×768
Name Explanation
C
Mode Lets you switch between the multiple image modes.
Each press of the buttons switches the mode in the order
shown below.
Normal
Motion
Wide Angle
Microscope
Macro
Innity
D
Default Resets the document camera to factory default settings.
Document Camera Parts
15
Base
Name Function
A
Mounting points You can attach the document camera to a table, cart,
or stand with commercially available M4 bolts. You
can thread them to a maximum depth of 5mm
(0.35 inch).
Attention
Fasten the bolts securely but do not
overtighten them. Do not use adhesives.
B
Handle, and security ca‐
ble installation point
Hold this handle when moving the document
camera. You can also attach a security cable here to
prevent the document camera from being stolen.
Document Camera Parts
16
Remote Control
Name Function
A
[t] power button Turns the document camera on or o.
B
[WiFi/USB] button
[
]
Lets you switch between Wi-Fi mode and USB
mode.
C
[Capture] button
[
]
Captures still images.
D
[Freeze/Stop] button
[
]
Freezes live images. Press the button again to resume
projection.
While playing a video, stops the video.
E
[Rotate Image] button
[
]
Lets you turn an image upside-down.
F
[Menu] button
[
]
Opens and closes the menu.
G
[Enter] button
When the menu is displayed, pressing this button
conrms the current selection.
During a slideshow, lets you reload a still image.
During video playback, pauses and resumes
playback.
H [ ] [ ] [ ]
[
] buttons
When the menu screen is displayed, pressing these
buttons selects menu items and setting values.
During a slideshow, press [
] to return to the
previous image, or press [
] to advance to the
next image. During video playback, press [
] to
rewind, or press [
] to fast-forward.
I
[Auto Focus] button
[
]
Focuses on a subject automatically.
J
[Zoom] button
[
] [ ]
Zooms in on or out of the image when
projecting the document camera’s live images or
captured still images.
K
[Zoom 1x] button
[
]
Resets the zoom level to 1x.
Remote Control Buttons
17
Name Function
L
[Default] button
[
]
Resets the document camera to factory default
settings.
M
[Brightness] button
[
] [ ]
Adjusts the brightness or the projected image.
N
[Volume] button
[
] [ ]
Adjusts the volume.
O
[Mode] button
[
]
Lets you switch between multiple image modes.
Each press of the buttons switches the mode in the
order shown below.
Normal
Motion
Wide Angle
Microscope
Macro
Innity
P
[AE Lock] button
[
]
Stops automatic exposure adjustment and
xes
exposure level.
Q
[Del] button
[
]
Deletes an image or video in playback mode.
R
[Lamp] button
[
]
Turns the LED on the camera on or
o.
Name Function
S
[Resolution] button
[
]
Lets you switch between the multiple resolution
settings.
Each press of the buttons switches the mode in the
order shown below.
3840×2160 @ 60
3840×2160 @ 30
1920×1080
1280×720
1024×768
T
[DC/PC] button
[
]
Lets you switch between images projected from the
document camera and images projected from a
connected computer.
Press this during a slideshow or playback of a video
to return to the camera mode.
U
[Record] button
[
]
Starts and stops video recording.
V
[Playback] button
[
]
Starts or stops playback of a video.
W
Remote control light-
emitting area
Outputs remote control signals.
Remote Control Buttons
18
Name LED Status and Meaning
Power supply
[t]
Lights orange: e document camera is in standby mode
Flashes orange:
e
document camera is warming up
Lights blue: Start-up of the document camera has been completed
WiFi
[
]
Flashes blue rapidly: The document camera is searching for a Miracast-compatible device
Flashes blue slowly: The document camera is connected via Miracast
LED Indicators
19
Connecting
Follow the instructions in this section to set up the document camera.
e document camera can be connected directly to a projector, external
monitor, or other video device using the HDMI cable. It can also be
connected via Miracast.
a
You can also connect the document camera to a projector through
a computer.
s "Connecting to a Projector using
Soware"
p.24
Connecting Using the HDMI Cable
Connect the HDMI port on the document camera with a projector using
the included HDMI cable. Images (live or on a USB ash drive) from
the document camera are output from the projector.
a
When image devices that support the HDMI CEC standard are
connected to the document camera, operations for the document
camera and the image device can be linked together. Set HDMI
Link on the document camera. s System - HDMI Link p.43
For necessary settings on the image device, see the documentation
provided with the device.
Connecting the Document Camera to a Projector
21
Connecting to a Projector via Miracast
You can connect the document camera to a projector to project images
wirelessly via Miracast.
To connect, first display the on-screen menu on an HDMI monitor and
configure the Miracast settings.
a
• When connecting via Miracast for the rst time, it may take some
time to connect.
• When connecting via Miracast, recording and playback are not
possible.
a
Connect the HDMI Out port on the document camera with an
HDMI monitor using the HDMI cable.
b
Turn on the document camera.
s "Plugging In and Turning On" p.28
a
Make sure that the document camera and a projector are not
connected with a USB cable. If they are connected, Miracast
settings cannot be made.
c
Turn on the HDMI monitor.
d
Press the [ ] button on the document camera.
e on-screen menu appears on the HDMI monitor.
s "Using the On-screen Menu" p.41
e
Open the Miracast menu and select Connect to view a list of
devices that can be connected.
f
Select the projector you want to connect from the list and press
the [Enter] button.
e
connection to the selected projector is completed, and the
projector will project the image from the document camera.
a
To nd out the name of the Epson projector to be connected,
use the projector to display the source selection screen and
select Screen Mirroring.
Refer to your projector documentation for details.
Connecting the Document Camera to a Projector
22
When Using a Computer
By connecting the computer to the HDMI In port and the projector to
the HDMI Out port, images of PowerPoint
les
and other applications
on the computer can be projected from the projector.
a
Images on the computer connected to the document camera are
only output from the HDMI Out port.
e projected i mage c an be s witched b etween t he computer images and
the images from the document camera (live image or image on a USB
flash drive) using the [ ] button on the document camera or remote
control.
Connecting the Document Camera to a Projector
23
Using Easy Interactive Tools
By using the camera screen of Easy Interactive Tools, you can display
images from the document camera on a computer connected via a USB
cable. You can adjust the size, brightness, etc. of the images on the computer
and save it as an image file or a video file. If you want to project the images
from the document camera, connect the computer to a projector.
Download Easy Interactive Tools from the following website:
http://epson.com/support/dc30downloads (U.S.)
http://epson.ca/support/dc30downloads (Canada)
a
Connect the USB Mini-B port on the document camera to a
computer using a USB cable.
b
Connect the computer to a projector.
The cable used to create the connection differs depending on the
computer and projector you are using. See the documentation
provided with the computer and projector you are using.
For more details on Easy Interactive Tools, see the Easy Interactive
Tools Operation Guide.
a
• You cannot project images by directly connecting the document
camera to a projector with a USB cable.
• Connect the document camera to a USB 2.0 port of a computer.
If you connect it to a USB 3.0 port, it may not function properly.
• Do not connect multiple document cameras to one computer at
the same time.
• When projecting an image using a projector that supports the
interactive pen or touch operations, you can operate the Easy
Interactive Tools on the projected image.
Connecting to a Projector using Software
24
Using Epson Connect Tool for Document Camera
By using the soware Epson Connect Tool for Document Camera, you
can connect the document camera to a projector via Miracast using the
computer.
Download Epson Connect Tool for Document Camera from the
following website:
http://epson.com/support/dc30downloads (U.S.)
http://epson.ca/support/dc30downloads (Canada)
a
Connect the USB Mini-B port on the document camera to a
computer using a USB cable.
b
On the computer, start Epson Connect Tool for Document
Camera.
c
On the screen that appears, select the projector you want to
connect via Miracast.
Once the connection is made, the image captured by the
document camera is projected by the projector.
a
When connecting the document camera via Miracast, the USB
connection with the computer is disconnected.
Connecting to a Projector using Software
25
Projecting
a
Raise the camera arm with one hand while holding the base of
the camera with your other hand.
b
Position the camera head above the projection area.
Positioning the Document Camera
27
Connect the document camera to the projector with a cable before
turning on the document camera. s "Connecting" p.20
a
Connect the power cord as shown and plug the cord into a
wall outlet.
a
Use the included AC adapter.
b
Press the [t] power button on the document camera or remote
control.
e power indicator ashes orange. When startup is complete, the
power indicator stops ashing and lights blue. Startup takes
approximately 20 seconds.
c
Turn on your projector.
d
Select the appropriate source on the projector depending on
the port to which you connected.
Live images from the document camera are projected from the
projector.
Plugging In and Turning On
28
a
Place your document on the table under the camera head.
a
• The maximum document size that can be projected is
13.5 × 18.9 inches (345 × 480 mm) landscape.
• When projecting an 11 × 17 or A3-size document, open
the Image menu, and set Image Mode to Wide Angle.
b
Press the [ ] button to illuminate the document.
a
If necessary, you can adjust the brightness of the image using
the [
] or [ ] on the document camera or remote
control.
c
Press the [ ] button on the document camera or remote
control.
e
focus is adjusted automatically.
d
To zoom in on part of the image, press the [ ] button on the
document camera or remote control. Press the [
] button to
zoom out.
a
• You can zoom up to 10x optically and 23x digitally. (When the
optical zoom rate reaches the maximum value, it switches to the
digital zoom.)
• Image quality declines when using the digital zoom function.
Projecting
29
Switching the Projected Image
When a computer is connected to the document camera, you can switch
the image projected from the projector using the [
] button on the
document camera or the remote control.
Freezing an Image
To freeze the image, press the [ ] button on the document camera or
remote control.
Aer
freezing the image, you can remove your document while leaving
its image displayed on the screen. Place your next document under the
camera lens and press the [
] button again; your presentation continues
without interruption.
Projecting Small Objects
To project a small object, lower the camera arm. You can place the
camera head within approximately 5 cm (2 inches) of the object.
To zoom in on part of the image, press the [
] button on the
document camera or remote control. Press the [
] button to zoom out.
Projecting
30
Displaying Whiteboard Images
You can use the document camera to display a lecture or presentation at
the front of a room, or to capture images of a whiteboard or chalkboard.
a
To ip the image upside down, press the [ ] button and open
the Image menu, then set Image Rotation to 180 degrees.
a
Rotate the camera head and set it in the direction of the object.
b
Press the [ ] button on the document camera or remote
control.
e image is automatically focused.
a
You can make an audio/video recording of your projection.
e recorded images are saved in the USB ash drive.
s "Saving Videos" p.37
Projecting
31
Projecting Through a Microscope
Projected image
To display objects as seen through a microscope, use the included
microscope adapter.
Press the [
- ] button and open the Image menu, then set
• Images may not be displayed correctly depending on the optical
properties of your microscope.
a
Loosely attach the screws to the microscope adapter.
b
Attach the microscope adapter to the camera head of the
document camera, and rotate the adapter to
x
it in place.
Projecting
32
a
• Before attaching the document camera to the microscope, make the
following settings:
- Focus the microscope and adjust the zoom.
Image Mode to Microscope.
c
Attach the microscope adapter to the microscope eyepiece and
secure the adapter by tightening the screws.
Projecting
33
Turn o the document camera aer use.
a
Press the [t] power button on the document camera or remote
control.
e projected image disappears, and the power indicator shows
standby state (lights orange).
b
Disconnect the power cord and any other connected cables, and
then fold down the camera arm.
Turning Off
34
Saving Images and Playing a Slideshow or Video
You can save live images captured by the document camera to a USB ash drive. You can play a slideshow with the saved still images or play the saved
videos.
is section explains how to perform operations using the document camera or the remote control. You can save images using soware on your computer.
s "Using Easy Interactive Tools" p.24
You can save images captured by the document camera to a USB ash
drive as still images.
a
• Images are saved in JPEG format at the resolution set in the
Output Resolution setting of the document camera. e
maximum resolution that can be saved is 4K.
• If the USB ash drive is low on space, the message “Storage Full”
is displayed, and the image is not saved.
a
Connect a commercially available USB ash drive to the
document camera.
b
Project the image you want to save.
c
Press the [ ] button to capture the image.
e
icon appears in the center of the screen and the captured
image is saved to the USB
ash
drive.
d
Repeat steps 2 and 3 for any additional images you want to
save.
Saving Images
36
You can save images and audio from the document camera to a USB
ash drive as video.
a
• Videos are saved in mp4 format at the resolution set in the
Output Resolution setting of the document camera.
• e maximum size that can be recorded in one le is 2 GB.
• If the USB
ash
drive is low on space, the message “Storage Full”
is displayed, and the video is not saved.
• Set Sleep Mode to O to prevent the power turning o while
recording. s System - Sleep Mode p.43
a
Connect a commercially available USB ash drive to the
document camera.
b
Project the image you want to save.
c
Press the [ ] button to start recording.
a
• While recording, the elapsed time is displayed at the top
right of the screen. is is not displayed on the saved
image.
• Do not disconnect the USB ash drive while recording.
• e following buttons can be operated while recording.
[Zoom], [Zoom 1x], [Auto Focus], [Brightness], [Image
Rotation], [Lamp]
Note that operation sounds are also recorded.
• Even if you connect the document camera to another
device with a USB cable, it will not connect while
recording.
d
To stop recording, press the [ ] button again.
Saving Videos
37
You can play a slideshow with the images saved on a USB ash drive.
is function is unavailable in the following situations.
• When the document camera is connected to a computer with a USB
cable
• When the document camera is connected via Miracast
• When recording a video
Files that can be played as a slideshow
Type File Type Notes
Still images JPEG
Files with a resolution of less than 3840 × 2160
Videos mp4 Files less than 2 GB in size
a
Only images captured by the document camera can be displayed in
the slideshow.
s "Problems related to USB Flash Drive" p.48
a
Press the [ ] button on the remote control while the live
image is being projected.
umbnails of the images on the USB ash drive are displayed.
b
Press the [ ] button and open the Playback menu, then
select Slide Show - Start.
A slideshow will begin.
a
Press the [ ] button again to stop the slideshow and return
to the thumbnail screen.
c
Press the [ ] button to display the slideshow related menus;
Slide Show, Interval, and Delete All.
d
To end the slideshow, press the [ ] button on the remote
control.
Playing a Slideshow (displaying thumbnail screen)
38
a
Press the [ ] button on the remote control while the live
image is being projected.
umbnails of the images on the USB ash drive are displayed.
b
Select an image or video you want to show and start displaying
the image or playing the video.
• Still images
Select an image using the arrow buttons
([
] [ ] [ ] [ ]) on the remote control, and then press
the [Enter] button.
• Videos
Press the [Enter] button to display a full-screen preview of the
video you want to play, then press the [Enter] button again.
To pause or resume the video, press the [Enter] button.
Press the [
] button during video playback to exit the video.
Displaying Saved Images or Playing Videos
39
Image Adjustments and Effects
e document camera provides a full range of image adjustments and eects, including freeze image, black-and-white, and the ability to change the display
for color images.
Press the [ ] button on the control panel or remote control to view
the on-screen menu. See the following for details on each item in the on-
screen menu.
s "On-Screen Menu Table" p.42
e following menu is displayed:
Use the arrow buttons ([ ] [ ] [ ] [ ]) on the remote control
to navigate the menu and adjust the settings. Press the [Enter] button to
select a setting. When you are done adjusting the settings, press the
[
] button to close the menu and save your settings.
a
e
menu cannot be displayed when the document camera is
connected to a computer with a USB cable.
Using the On-screen Menu
41
Image
e Image menu allows you to adjust the quality of the live video image.
Setup Item Explanation
Brightness e brightness level can be manually adjusted in the range of 0 to 255.
To lighten the screen, select + and hold down the [Enter] button. To darken the screen, select − and hold down the [Enter]
button. e brightness can also be changed using the [
] and [ ] buttons on the control panel.
Contrast
e
contrast level can be manually adjusted in the range of 0 to 255.
To increase the contrast, select + and hold down the [Enter] button. To decrease the contrast, select − and hold down the
[Enter] button.
Saturation
e
saturation level can be manually adjusted in the range of 0 to 255.
To make the image more vivid, select + and hold down the [Enter] button. To make the image more subdued, select − and
hold down the [Enter] button.
Image Mode
You can choose from the following options.
Normal
*
: Standard shooting mode.
Motion: Mode for fast-moving images.
Wide Angle: Mode for wide-angle images. Use this option when shooting an 11×17 or A3-size document.
Microscope: Mode for images of a connected microscope.
Macro: Mode for capturing close subjects.
Infinity: Mode for capturing distant subjects.
Image mode cannot be changed when connected via Miracast.
Color/B&W/Negative Select the display method for color images.
Color
*
: Displays the image in color.
Black&White: Displays the image in black-and-white.
Negative: Displays a photographic negative in true color.
Image Rotation Lets you rotate the image.
Normal
*
: Displays the image as it actually is.
180 degrees: Displays the image upside-down.
Exposure Auto
*
: Automatically adjusts exposure.
Manual: Manual exposure setting is enabled.
On-Screen Menu Table
42
Setup Item Explanation
Manual Exposure When Manual is selected for Exposure, the exposure setting can be manually changed in the range of 0 to 99.
To increase the value, select + and hold down the [Enter] button. To decrease the value, select − and hold down the [Enter]
button.
White Balance Select the setting according to the lighting in the room where you are using the document camera.
Auto
*
: Automatically adjusts the image color according to the display environment.
Manual: Lets you change the colors of the image manually. You can choose from the following options.
Cloudy: Suitable for use in cloudy weather.
Daylight: Suitable for use in fair weather.
Fluorescent: Suitable for use in a room with uorescent lighting.
Incandescent: Suitable for use in a room with incandescent lamps.
Manual White Balance
e
white balance can be manually adjusted in the range of 2800K to 10000K.
To increase the value, select + and hold down the [Enter] button. To decrease the value, select − and hold down the [Enter]
button.
* Default setting at time of purchase
Miracast
e Miracast menu allows you to make Miracast connection settings.
Setup Item Explanation
Disconnect Select this option to disconnect Miracast connection.
Connect A list of devices that can be connected is displayed. Select a device you want to connect from the list.
System
e System menu allows you to change various document camera settings.
Setup Item Explanation
Language Changes the on-screen menu language.
On-Screen Menu Table
43
Setup Item Explanation
Output Resolution
Sets the output resolution when connecting an HDMI cable to the HDMI port. You can select the maximum resolution of your
output device from the following options. The highest one is the maximum resolution that the document camera can support.
3840×2160 @ 60
3840×2160 @ 30
1920×1080
1280×720
1024×768
This menu is not available when connected via Miracast.
USB Streaming Format You can enable H.264 so that H.264 can be selected as the streaming format when connecting via USB.
H.264 On: Enables H.264.
H.264 O: Disables H.264.
Flickerless Eliminates icker when giving presentations in regions with dierent electrical systems.
50Hz
60Hz
HDMI Link When an image device that supports the HDMI CEC standard is connected to the document camera, operations for the
document camera and the image device can be linked together.
When this is set to On
*
, the connected device turns on when the document camera is turned on. A change to this setting takes
eect aer the document camera is turned o.
Sleep Mode Operation settings when the document camera is inactive.
On:
e
power automatically turns
o
if the document camera is inactive for a certain amount of time.
O: e power remains on even if the document camera is inactive for a certain amount of time.
Sleep Mode Timer Sets the amount of time, in the range of 1 to 6 hours, before the document camera automatically turns o.
Mic. Volume e volume of the built-in microphone can be manually adjusted.
To incre as e the volume, s ele c t + and hold down the [Enter] button. To decrease the volume, select − and hold down the [Enter]
button.
Information Displays the product name,
rmware
version, and MAC address of the document camera.
Reset Resets the menu settings to factory defaults.
* Default setting at time of purchase
On-Screen Menu Table
44
Playback Mode
is menu allows you to make settings for playing back and projecting images or videos saved by the document camera.
a
is
menu is available when a commercially available USB
ash
drive is connected to the document camera.
This menu is not available when the document camera is in the following states:
• It is connected via Miracast
• It is connected using a USB cable
Setup Item Explanation
Slide Show Starts or pauses a slideshow.
Press the [
] button on the remote control to end the slideshow.
Interval Sets how long each image or video should appear in the slideshow, in the range of 1 to 100 seconds, before proceeding to the next one.
Press + to make the time longer, and press − to make the time shorter.
Delete All Delete all images and videos saved in the USB ash drive.
On-Screen Menu Table
45
Solving Problems
Operation Problems
No image appears on the screen
• After you press the [t] power button, wait a few moments for the
image to appear. It takes approximately 20 seconds for the document
camera to output an image.
• Make sure all necessary cables are securely connected and the power
is on for the projector and the document camera.
s "Connecting the Document Camera to a Projector" p.21
s "Connecting to a Projector using Software" p.24
• To project live images from the document camera, press the [ ]
button on the document camera or the remote control.
• Select the correct source on your projector. The source refers to the
port on the projector to which you have connected the cable.
• Make sure your projector is turned on and not in sleep mode.
Make sure the image has not been "muted" or turned off. Check
that the document camera is not in sleep mode.
• Reconnect the power cord. If no images are output even after
pressing the [t] power button again, stop using the document
camera, contact Epson support or the nearest service center provided
in this guide. s "Epson Projector Contact List" p.49
Image Quality Problems
e image is fuzzy or out of focus
• If the surroundings are dark and the contrast in the projected image
is low, the document camera's auto focus function may not work
correctly. Adjust Brightness and/or Contrast in the Image menu.
• Make sure the camera head is at least 5 cm (2 inches) away from
the object you are viewing.
s "Zoom Magnication and Projection Distance by Image Mode"
p.58
• If you are using a projector to display the image, check its focus.
• If the zoom magnication is too high, the focus point may be out of
the angle of view. Try reducing the zoom magnication.
e image brightness or colors are incorrect
• Press the [
] button to illuminate the subject.
• Press the [
] or [ ] button to increase or decrease image
brightness.
• Set the White Balance setting to Auto to adjust the color
automatically. If the colors are still not correct, select the best setting
for the type of lighting in your environment (Cloudy, Daylight,
Fluorescent, or Incandescent).
s "Image" p.42
• If you connected a microscope to the document camera and set the
image mode to Microscope, be sure to change the Microscope setting
to another mode before using the document camera without
connecting a microscope.
s
"Image" p.42
Cannot focus on a three dimensional subject
If the subject is a three-dimensional object, the following will make it
easier to bring it into focus.
• Place a uniformly colored 11×17 or A3-size or larger object as a
background for the three-dimensional subject.
• Before placing the three-dimensional subject, focus on the position
where the subject will be placed.
Other image problems
• If the image is stretched or has black bars, change Output Resolution
in the System menu.
s "System" p.43
Problems and Solutions
47
a
To return all image settings to their initial values, select the Reset
menu.
s "Image" p.42
Problems related to USB Flash Drive
Some images do not appear
Check the le format when copying images to the USB ash drive from
a computer.
• e le format of the images must be JPEG. Do not edit the images,
as this may change their format and prevent them from being
displayed.
• Videos and still images not captured by the document camera cannot
be played back. Files whose images are not displayed on the
thumbnail screen were not taken with the document camera.
Miracast Problems
Takes time to connect
• It may take some time to connect. Restart the device you are
connecting to
aer
a while.
• Check the settings.
s "Connecting to a Projector via Miracast" p.22
Remote Control Problems
Remote control does not work
You may be operating the remote control outside its
eective
range.
Check the eective range of the remote control.
s "Specications" p.55
Problems and Solutions
48
See the following contact list if any problems occur when using the
document camera outside Japan.
See the Web Home Page provided with each contact for the latest contact
information. If the country you are in is not provided, see the main
home page, www.epson.com.
EUROPE
ALBANIA
ITD Sh.p.k.
https://www.itd-al.com
AUSTRIA
Epson Deutschland GmbH
http://www.epson.at
BELGIUM
Epson Europe B.V.
Branch oce Belgium
https://www.epson.be
BOSNIA AND HERZEGOVINA
NET d.o.o. Computer Engineering
https://netcomp.rs
BULGARIA
Epson Service Center, Bulgaria
http://www.kolbis.com
CROATIA
MR servis d.o.o.
http://www.mrservis.hr
CYPRUS
A.T. Multitech Corporation Ltd.
http://www.multitech.com.cy
CZECH REPUBLIC
Epson Europe B.V.
Branch Oce Czech Republic
https://www.epson.cz
DENMARK
Epson Denmark
https://www.epson.dk
ESTONIA
Epson Service Center, Estonia
http://www.epson.ee
FINLAND
Epson Finland
http://www.epson.
FRANCE and DOM-TOM TERRITORIES
Epson France S.A.
https://www.epson.fr
GERMANY
Epson Deutschland GmbH
https://www.epson.de
Epson Projector Contact List
49
GREECE
Info Quest Technologies S.A.
https://www.infoquest.gr
HUNGARY
Epson Europe B.V.
Branch Oce Hungary
https://www.epson.hu
IRELAND
Epson (UK) Ltd.
https://www.epson.ie
ISRAEL
Epson Israel
https://www.epson.co.il
ITALY
Epson Italia s.p.a.
https://www.epson.it
KAZAKHSTAN
Epson Kazakhstan Rep. Oce
http://www.epson.kz
LATVIA
Epson Service Center, Latvia
http://www.epson.lv
LITHUANIA
Epson Service Center Lithuania
http://www.epson.lt
LUXEMBURG
Epson Europe B.V. Branch oce Belgium
https://www.epson.be
NORTH MACEDONIA
Digit Computer Engineering
http://www.digit.com.mk
NETHERLANDS
Epson Europe B.V. Benelux sales oce
https://www.epson.nl
NORWAY
Epson Norway
https://www.epson.no
POLAND
Epson EUROPE B.V. Branch Oce Poland
https://www.epson.pl
PORTUGAL
Epson Iberica S.A.U. Branch Oce Portugal
https://www.epson.pt
ROMANIA
Epson Europe B.V. Branch Oce Romania
https://www.epson.ro
RUSSIA
Epson CIS
https://epson.ru
Epson Projector Contact List
50
UKRAINE
Epson Kiev Rep Oce
http://www.epson.ua
SERBIA
Nepo System d.o.o.
https://neposystem.rs
AIGO Business System d.o.o. Beograd
https://aigo.rs
SLOVAKIA
Epson EUROPE B.V. Branch Oce Czech Republic
https://www.epson.sk
SLOVENIA
Birotehna d.o.o
http://www.birotehna.si
SPAIN
Epson Iberica, S.A.U.
https://www.epson.es
SWEDEN
Epson Sweden
https://www.epson.se
SWITZERLAND
Epson Deutschland GmbH Branch oce Switzerland
https://www.epson.ch
TURKEY
Tecpro Bilgi Teknolojileri Tic. ve San. Ltd. Sti.
http://www.tecpro.com.tr
UK
Epson (UK) Ltd.
https://www.epson.co.uk
Indication of the manufacturer and the importer in accordance with
requirements of United Kingdom directive
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
http://www.epson.com/
Importer: Epson (UK) Ltd.
Address: Westside, London Road, Hemel Hempstead, Hertfordshire, HP3 9TD,
United Kingdom
http://www.epson.co.uk
Indication of the manufacturer and the importer in accordance with
requirements of EU directive
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
http://www.epson.com/
Importer: EPSON EUROPE B.V.
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam
Zuidoost e Netherlands
Telephone: 31-20-314-5000
http://www.epson.com/europe.html
Epson Projector Contact List
51
AFRICA
https://www.epson.co.za
or
https://www.epson.fr
SOUTH AFRICA
Epson South Africa
https://www.epson.co.za
MIDDLE EAST
Epson (Middle East)
https://www.epson.ae
NORTH, CENTRAL AMERICA & CARIBBEAN
ISLANDS
CANADA
Epson Canada, Ltd.
http://epson.ca/support
COSTA RICA
Epson Costa Rica, S.A.
https://epson.co.cr
MEXICO
Epson Mexico, S.A. de C.V.
https://www.epson.com.mx
ECUADOR
Epson Ecuador
https://epson.com.ec
U. S. A.
Epson America, Inc.
http://epson.com/support
SOUTH AMERICA
ARGENTINA
Epson Argentina S.R.L.
https://www.epson.com.ar
BRAZIL
Epson do Brasil
https://epson.com.br
CHILE
Epson Chile S.A.
https://epson.cl
COLOMBIA
Epson Colombia Ltd.
https://epson.com.co
PERU
Epson Peru S.A.
Epson Projector Contact List
52
https://epson.com.pe
VENEZUELA
Epson Venezuela S.A.
https://epson.com.ve
ASIA AND OCEANIA (Country/Region)
AUSTRALIA
Epson Australia Pty. Ltd.
https://www.epson.com.au
CHINA
Epson (CHINA) CO., Ltd.
https://www.epson.com.cn
HONG KONG
Epson Hong Kong Ltd.
https://www.epson.com.hk
INDIA
Epson India Pvt., Ltd.
https://www.epson.co.in
INDONESIA
PT. Epson Indonesia
https://www.epson.co.id
JAPAN
Seiko Epson Co.
https://www.epson.jp
KOREA
Epson Korea Co., Ltd.
http://www.epson.co.kr
MALAYSIA
Epson Malaysia Sdn. Bhd.
https://www.epson.com.my
NEW ZEALAND
Epson New Zealand
https://www.epson.co.nz
PHILIPPINES
Epson Philippines Co.
https://www.epson.com.ph
SINGAPORE
Epson Singapore Pte. Ltd.
https://www.epson.com.sg
TAIWAN
Epson Taiwan
Technology & Trading Ltd.
https://www.epson.com.tw
THAILAND
Epson (Thailand) Co., Ltd.
https://www.epson.co.th
Epson Projector Contact List
53
Appendix
General Specifications
Product name
ELPDC30
Dimensions
Open (W ^ D ^ H): 23.1 ^ 21.8 ^ 6.3 inches (586 × 554 × 159 mm)
Folded (W ^ D ^ H): 14.3 × 3.3 × 6.3 inches (362 ^ 85 ^ 159 mm)
Type of sensor
1/3.2 inch CMOS sensor
Lens
F=2.8
Eective pixels
4K (3840 ^ 2160 pixels)
Imaging area
Up to 13.5 × 18.9 inches (345 ^ 480 mm) @ 18.5 inches (470 mm ) (in the Wide Angle mode)
Focus adjustment
Automatic
Auto focus is possible even aer zoom adjustment
Zoom adjustment
10x optical zoom (at innity)
23x digital zoom
Frame rate
Up to 60 fps
Internal microphone
1 (monaural input)
Remote control eective range
16.4 feet (5 m) from the front, right, and le of the document camera
19.6 feet (6 m) at a 45 degree angle from the left and right sides of the document camera
Power supply
AC adapter
100 to 240 VAC ±10%, 50/60 Hz, 0.5 A
Main unit
(FSP015-DPAN3)
5 VDC, 3 A, 15.0 W
Power consumption
Operating
With LED lamp on: 9.6 W
With LED lamp
o:
8.0 W
Standby
0.5 W
Operating temperature
41 to 95 degrees F (5 to 35 degrees C), without condensation
Storage temperature
14 to 140 degrees F (-10 to 60 degrees C), without condensation
Operating humidity
20 to 80% RH, without condensation
Storage humidity
10 to 90% RH, without condensation
Weight
Approx. 6.1 lb (2.8 kg)
Specifications
55
Input port HDMI port
*1
1
---
Output port HDMI port
*1
1
---
Connector port
miniUSB
*2
1
is can also be used as an output port
USB-A
*2
2
1: Wi-Fi dongle
1: USB Flash Drive
*1: HDMI CEC is supported. However, the operation of all compatible devices is not guaranteed.
*2: USB 2.0 is supported. However, the operation of all USB compatible devices is not guaranteed.
is product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Indications regarding the manufacturer, model name, and rating of the product can be found on the rating label on the bottom of the product.
Specifications
56
List of Supported Resolutions
HDMI output
4K (3840 × 2160 @ 30/60 Hz
*1
)
HDTV (1920 × 1080 @ 60 Hz, 1280 × 720 @ 60 Hz)
XGA (1024 × 764 @ 60 Hz)
miniUSB output
320 × 180 pixels
320 × 240 pixels
640 × 360 pixels
VGA (640 × 480)
XGA (1024 × 768)
720p (1280 × 720)
WXGA (1280 × 800)
QVGA (1280 × 960)
SXGA (1280 × 1024)
Full HD (1920 × 1080)
UXGA (1600 × 1200)
2048*1536 pixels (2048 × 1536)
2560*1920 pixels (2560 × 1920)
4K (3840 × 2160)
Miracast output
Full HD (1920 × 1080)
*1: Only 8-bit YUV format is available with the 3840 × 2160 @ 60 resolution.
Specifications
57
Zoom Magnification and Projection Distance by Image Mode
Image Mode Shooting distance range
Maximum optical zoom
magnication
*1
Maximum digital zoom
magnication
*1
Aspect Ratio/Frame Rate
Normal
3.9 to 31.5 inches (10 to 80 cm)
3.2x
23.9x
16:9@30 fps
Motion
16:9@60 fps
Wide Angle
4:3@30 fps
Microscope
--- 1x
16:9@30 fps
Macro
2 to 3.9 inches (5 to 10 cm)
2.8x
Infinity
31.5 to ∞ inches (80 to ∞ cm)
9.7x
*1: ese zoom magnications are theoretical values.
Specifications
58
e following options and consumables are available. Please purchase according to your application.
ese optional items are current as of April 2023.
ey are subject to change without notice.
Soft carrying case
ELPKS72 (V12H001K72)
Use this case to carry the document camera.
Optional Items
59
e following table lists the meaning of the safety symbols labeled on the
equipment.
No. Symbol mark
Approved
standards
Explanation
A
IEC60417
No.5007
"ON" (power)
To indicate connection to the mains.
B
IEC60417
No.5008
"OFF" (power)
To indicate disconnection from the
mains.
C
IEC60417
No.5009
Stand-by
To identify the switch or switch position
by means of which part of the equipment
is switched on in order to bring it into
the stand-by condition.
D
ISO7000
No.0434B
IEC3864-B3.1
Caution
To identify general caution when using
the product.
E
IEC60417
No.5041
Caution, hot surface
To indicate that the marked item can be
hot and should not be touched without
taking care.
F
IEC60417
No.6042
ISO3864-B3.6
Caution, risk of electric shock
To identify equipment that has risk of
electric shock.
G
IEC60417
No.5957
For indoor use only
To identify electrical equipment designed
primarily for indoor use.
H
IEC60417
No.5926
Polarity of d.c. power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a d.c. power supply
may be connected.
No. Symbol mark
Approved
standards
Explanation
I
IEC60417
No.5001B
Battery, general
On battery powered equipment. To
identify a device for instance a cover for
the battery compartment, or the
connector terminals.
J
IEC60417
No.5002
Positioning of cell
To identify the battery holder itself and
to identify the positioning of the cell(s)
inside the battery holder.
K
IEC60417
No.5019
Protective earth
To identify any terminal which is
intended for connection to an external
conductor for protection against electric
shock in case of a fault, or the terminal of
a protective earth electrode.
L
IEC60417
No.5017
Earth
Indicates a grounding port when No.11 is
not explicitly called for.
M
IEC60417
No.5032
Alternating current
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
N
IEC60417
No.5031
Direct current
To indicate on the rating plate that the
equipment is suitable for direct current
only; to identify relevant terminals.
O
IEC60417
No.5172
Class II equipment
To identify equipment meeting the safety
requirements specied for Class II
equipment according to IEC 61140.
P
ISO 3864 General prohibition
To identify actions or operations that are
prohibited.
Safety Standard Compliance Symbols and Descriptions
60
No. Symbol mark
Approved
standards
Explanation
Q
ISO 3864 Contact prohibition
To indicate injury that could occur due
to touching a specic part of the
equipment.
R
--- Never look into the optical lens while the
projector is on.
S
---
Do not place anything on top of the
projector.
T
ISO3864
IEC60825-1
Caution, laser radiation
To indicate the equipment has a laser
radiation part.
U
ISO 3864 Disassembly prohibition
To indicate a risk of injury, such as
electric shock, if the equipment is
disassembled.
V
IEC60417
No.5266
Stand-by or preparatory state for a part
of equipment
To indicate the stand-by or preparatory
state for a part of equipment.
W
ISO3864
IEC60417
No.5057
Caution, moving parts
To indicate the instructional safeguard to
keep away from moving parts.
X
IEC60417
No.6056
Caution, moving fan blades
To indicate the instructional safeguard to
keep away from moving fan blades.
Y
IEC60417
No.6043
Caution, sharp edges
To indicate that the marked item
contains sharp edges and should not be
touched without taking care.
Z
--- Never look into the optical lens while the
projector is on.
No. Symbol mark
Approved
standards
Explanation
a
ISO7010
No.W027
ISO 3864
Warning; Optical radiation
To warn of optical radiation. Taking care
to avoid injury to eyes and skin when in
the vicinity of optical radiation.
b
IEC60417
No.5109
Not to be used in residential areas
To identify electrical equipment which is
not suitable for a residential area (e.g.
equipment which produces radio
interference when in operation).
c
--- Indicates that you should not look into
the lens while the LED is on.
Safety Standard Compliance Symbols and Descriptions
61
FCC Compliance Statement
Supplier's DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We: Eps on Amer ica, Inc.
Located at: 3131 Katella Avenue, Los Alamitos, CA
Tel: 562 -981-3840
Declare under sole responsibility that the product identied herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B
digital device. Each product marketed, is identical to the representative
unit tested and found to be compliant with the standards. Records
maintained continue to
reect
the equipment being produced can be
expected to be within the variation accepted, due to quantity production
and testing on a statistical basis as required by 47CFR ß2.906. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interface
received, including interference that may cause undesired operation.
Trade Name: EPSON
Type of Product: Document Camera
Model: ELPDC30
Options:
Product name Model
Remote controller 1913835xx (x = 0-9)
Notice
62
Supplier's DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B external switching power supplies
We:
Located at:
Te l:
AVer Information, Inc.
668 Mission Ct., Fremont, CA 94539
(408) 263-3828
Declare under sole responsibility that the product identied herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B
digital device. Each product marketed, is identical to the representative
unit tested and found to be compliant with the standards. Records
maintained continue to reect the equipment being produced can be
expected to be within the variation accepted, due to quantity production
and testing on a statistical basis as required by 47CFR ß2.906. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interface
received, including interference that may cause undesired operation.
Trade Name:
Type of Product:
Model:
FSP
Switching Power Adapter
FSP015-DPAN3
Notice
63
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko
Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Neither Seiko Epson Corporation nor its
aliates
shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred by the
purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized
modications,
repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising
from the use of any options or any consumable products other than those designated
as Original Epson Products or Epson Approved Products by Seiko Epson
Corporation.
e contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may
dier.
Trademarks
EPSON is a registered trademark and the EPSON logo is a registered
logomark of Seiko Epson Corporation.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing Administrator,
Inc.
Wi-Fi
®
and Miracast
®
are registered trademarks of the Wi-Fi Alliance
®
.
Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
This information is subject to change without notice.
© 2023 Epson America, Inc.
5/23
CPD-63460
Copyrights and Trademarks
64
