WC05W Wireless Charging Dock
Product User Manual
Input: USB-C 5V/9V/12V PD
Output: Qi Wireless Charging
Max 5W
Coil: 6.8uH 35mm
Operating Steps
1. Connect Power: Insert the USB-C cable into a PD-compatible charger (5V1A/5V2A charger
recommended), and connect to power.
2. Place Device: Place the Qi-compatible device centered on the charging dock panel, ensuring
the coil area is aligned.
3. Start Charging: The device automatically enters charging mode and displays a charging icon to
start charging.
4. Remove When Fully Charged: Charging stops automatically when fully charged. Simply
remove the device.
Important Notices
● Use a PD-compatible charger (5V1A/5V2A charger recommended). Avoid using low-quality
chargers.
● Phone cases thicker than 3mm or containing metal/magnetic materials may affect charging
efficiency. Removal is recommended.
● During charging, do not place metal foreign objects (coins, keys, etc.) between the phone
and the coil panel.
● Operating temperature: 0~40 degC. Built-in overheat protection will pause charging at high
temperatures.
Wireless Charging Dock · User Manual · V1.0
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference
by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
The FCC certification of this device refers to RF exposure testing performed in typical
operating conditions, where a person is no closer than 20 centimeters from
the
device surface at all times. Only in the stated conditions, the device is shownto fully
comply with the FCC RF Exposure requirements of KDB 447498.
