Mova VIAX 250 Robotic Lawnmower without Boundary Cable, Dual Vision

Product's Documents

Below are documents related to this product, you can read online or download:
VIAX 250 photo

User Manual

This is the main product document for model VIAX 250.

The file format is pdf, 39 pages, you can download this manual here .

background
MOVA ViAX 250/300
User Manual
The illustrations in this manual are for reference only.
Please refer to the actual product for accuracy.
background
background
EN
.........................................................................P04~P39
DE
.........................................................................P40~P75
FR
.......................................................................P76~P111
IT
.....................................................................P112~P147
ES
.....................................................................P148~P183
NL
.....................................................................P184~P219
background
4
EN
1 Safety Instructions ...................................................................................... P05
2 Product Introduction ....................................................................................P09
3 Installation ................................................................................................. P11
4 Preparation for First Use ............................................................................. P14
5 Map Your Garden ....................................................................................... P18
6 Operation .................................................................................................. P25
7 MOVAhome App .......................................................................................... P28
8 Maintenance............................................................................................... P31
9 Battery .................................................................................................... P34
10 Winter Storage ......................................................................................... P34
11 Transport ................................................................................................. P34
12 Troubleshooting ....................................................................................... P35
13 Specications .......................................................................................... P38
Original Instructions
Table of Contents
background
EN
5
1.1 General Safety Instructions
1 Safety Instructions
• Carefully read and understand the user manual before using the product.
• Only use the equipment recommended by MOVA with the product. Any other usage is incorrect.
• Do not allow children to be in the vicinity or play with the machine when it is operating.
• Do not use the product in areas where people are unaware of its presence.
• When manually operating the product with the MOVAhome app, do not run. Always walk, watch your steps on
slopes, and maintain balance at all times.
• Avoid using the product when there are people, especially children or animals, in the work area.
• If operating the product in public areas, place warning signs around the work area with the following text:
"Warning! Automatic lawn mower! Keep away from the machine! Supervise children!"
• Wear sturdy footwear and long trousers when operating the product.
• To prevent damage to the product and accidents involving vehicles and individuals, do not set work areas or
transport paths across public pathways.
• Do not touch moving hazardous parts, such as the blade disc, before it has come to a complete stop.
• Seek medical aid in case of injury or accidents.
• Set the product to OFF before clearing blockages, performing maintenance, or examining the product. If the
product vibrates abnormally, inspect it for damage before restarting. Do not use the product if any parts are
defective.
• Do not install the main cable in areas where the product will cut. Follow the instructions provided for cable
installation.
• Only use the charging station included in the package to charge the product. Incorrect use may result in
electric shock, overheating, or corrosive liquid leakage from the battery. In case of electrolyte leakage, ush with
water/neutralizing agent and seek medical aid if the corrosive liquid comes into contact with your eyes.
• When connecting the main cable to the power outlet, use a residual-current device (RCD) with a maximum
tripping current of 30 mA.
• Only use original batteries recommended by MOVA. The safety of the product cannot be guaranteed with non-
original batteries. Do not use non-rechargeable batteries.
• Keep extension cords away from moving hazardous parts to avoid damage to the cords which can lead to
contact with live parts.
• The illustrations used in this document are for reference only. Please refer to the actual products.
• Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions to use the machine, local regulations may restrict the
age of the operator.
• Do not connect or touch a damaged cable until it is disconnected from the power outlet. If the cable becomes
damaged during operation, disconnect the plug from the power outlet. A worn or damaged cable increases
the risk of electrical shock and should be replaced by service personnel.
• Do not push the product forcefully or quickly, as this may damage the product.
• To maintain compliance with the RF exposure requirement, a separation distance of 35 cm between the device
and the human should be maintained.
• For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
• Avoid installing the charging station in areas where people may trip over it.
• Do not install the charging station in areas where there is a risk of standing water.
• Do not install the charging station, including any accessories, within 60 cm of any combustible material.
Malfunctioning or overheating of the charging station and power supply can pose a re hazard.
1.2 Safety Instructions for Installation
background
6
EN
• Keep your hands and feet away from the rotating blades. Do not place your hands or feet near or below the
product when it is turned on.
• Do not lift or move the product when it is turned on.
• Use the park mode or set the product to OFF when there are people, especially children or animals, in the
work area.
• Ensure that there are no objects such as stones, branches, tools, or toys on the lawn. Otherwise, the blades
may be damaged when they come into contact with an object.
• Do not put objects on top of the product or charging station.
• Do not use the product if the STOP button is not functioning.
• Avoid collisions between the product and people or animals. If a person or animal comes in the path of the
product, stop it immediately.
• Always set the product to OFF when it is not in operation.
• Do not use the product simultaneously with a pop-up sprinkler. Utilize the Schedule function to ensure that the
product and pop-up sprinkler do not operate at the same time.
• Avoid placing a connection channel where pop-up sprinklers are installed.
• Do not operate the product in the presence of standing water in the work area, such as during heavy rain or
water pooling.
• Set the product to OFF when performing maintenance.
• After washing, ensure that the product is placed on the ground in its normal orientation, not upside down.
• Do not reverse the product to clean the chassis. If you do reverse it for cleaning purposes, make sure to restore
it to its proper orientation afterward. This precaution is necessary to prevent water from entering the motor and
potentially aecting normal operation.
Lithium-ion batteries can explode or cause a re if disassembled, short-circuited, exposed to water, re, or high
temperatures. Handle them with care, do not dismantle or open the battery, and avoid any form of electrical/
mechanical abuse. Store them away from direct sunlight.
1. Only use the battery charger and power supply provided by the Manufacturer. The use of an inappropriate
charger and power supply can cause electric shocks and / or overheating.
2. DO NOT ATTEMPT TO REPAIR OR MODIFY BATTERIES! Repair attempts may result in severe personal injury, due
to explosion or electrical shock. If a leak develops, released electrolytes are corrosive and toxic.
3. This appliance contains batteries that are only replaceable by skilled persons.
To avoid injuries, wear protective gloves when replacing the blades.
1.3 Safety Instructions for Operation
1.4 Safety Instructions for Maintenance
1.5 Battery Safety
1.6 Residual Risks
• Disconnect the plug from the charging station or remove the disabling device before cleaning or performing
maintenance on the charging station.
• Do not use a high-pressure washer or solvents to clean the product.
background
EN
7
1.7 Symbols and Decals
WARNING –
Read user instructions before operating the machine.
WARNING –
Keep a safe distance from the machine when operating.
WARNING -
Remove the disabling device before working on or lifting the
machine.
WARNING –
Do not ride on the machine.
WARNING –
It is not permitted to dispose of this product as normal household
waste. Ensure that the product is recycled in accordance with local
legal requirements.
background
8
EN
This product conforms to the applicable EC Directives.
Class III equipment
Read operator's manual
Direct current
Class II equipment
Hereby, Kutting Technology (Suzhou) Co., Ltd. declares that the radio equipment models MOVA MVVV1100/MVVV1200
are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: https://www.mova.tech/pages/declaration-of-conformity.
The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier
and better looking lawn than ever before. Depending on the size of your lawn, your mower may be programmed
to operate at any time or frequency. It is impossible for digging, sweeping or snow cleaning.
INTENDED USE
The product is in compliance with UK PSTI regulations, the full text of declaration of conformity is available at
the following internet address: https://www.mova.tech/pages/statement-of-compliance-for-uk-psti.
For detailed e-manual, please go to https://www.mova.tech/pages/user-manuals-and-faqs.
background
EN
9
1
The robot
2 Charging tower
(with a 10 m extension cable)
3
Baseplate
4 Power supply 5 Stakes × 8, Hex key 6 Spare blades and screws × 9
7 User manual
8
Lint-free cloth
9 Quick start guide
1
2
3
4
5
6
8 9
7
2.1 What's in the Box
2 Product Introduction
MOVA ViAX 250/300
User Manual
The illustrations in this manual are for reference only.
Please refer to the actual product for accuracy.
background
10
EN
Charging contacts
Stereo vision camera
Universal wheel
Handle
Battery compartment
Blade disc
Mowing height adjustment knob
Stop button
2.3 UltraEyes ™ 1.0 AI Dual-Vision System
Security key
Drive wheel
2.2 Product Overview
UltraEyes ™ 1.0 is the core of the ViAX Series—a pioneering innovation that redenes smart lawn care with
an AI-powered dual-vision system. This cutting-edge technology empowers the ViAX Series to navigate
your landscape with unmatched clarity and precision.
Equipped with dual Ultra-HDR AI cameras and AI algorithms, it accurately dierentiates between grass and
non-grass areas while identifying various objects in the yard. Through advanced visual processing and
intelligent decision-making, it ensures millimetre-level perception and positioning, truly understanding your
yard in all directions.
Indicator light on the camera
UltraEyes ™ 1.0 AI
Dual-Vision System
background
EN
11
3 Installation
3.1 Select a Suitable Location
• Place the charging station on a level surface near the edge of the lawn and a power outlet. Place it in an
area with a strong Wi-Fi signal.
Note: Use your mobile device to help check the Wi-Fi signal strength of the location. A strong Wi-Fi signal
ensures a stable connection between the robot and the app.
Important
– Make sure the ground is soft enough to allow stake installation.
– Place the charging station on level terrain. Any slope may cause the robot to roll backward and lose
contact.
• Keep at least 1 m of free space with no obstacles to the left, right and in front of the charging station. Make
sure that the grass around the location is shorter than 6 cm. If the grass is taller, please mow it with a push
mower rst. Tall grass may make it dicult for the robot to return to the charging station.
6cm
2.4 Sensor
Name Description
Stereo Vision
Camera
Provides positioning and detects obstacles, lawn boundaries, and human presence.
Angle of view: 110° (horizontal), 75° (vertical), 120° (diagonal)
Resolution: 2 MP
background
12
EN
3.2 Install the Charging Station
1 Insert the charging tower into the baseplate until you hear a click.
2 Secure the baseplate to the ground with the supplied stakes and hex key.
3 Connect the power supply to the extension cable and then connect to a power outlet. Please keep the
power supply at least 30 cm above the ground.
Note: The LED indicator on the charging station will be constant blue when there is power.
Blue Light
background
EN
13
LED Indicator on the Charging Station
LED Indicator Light Colour Meaning
Blinking/solid red
1. There is an issue with the charging station (such as a problem with the
charging current or voltage).
2. The robot docks in the charging station but the charging is
abnormal (for example charging contacts have a short circuit).
Solid blue
The charging station has power. The robot is not in the charging
station.
Blinking green The robot is charging in the charging station.
Solid green
The robot is docked at the charging station and is either:
1. Fully charged, or
2. Not charging because the current time is outside the designated
charging period.
4 Put the robot in the charging station to charge. Make sure the charging contacts on the robot and the
charging station are connected correctly.
Notes
• The indicator light on the charging station will blink green when the robot is charging successfully in the
charging station.
• If you're looking to add a garage for extra protection, please use the matching MOVA Garage available at
local retailers or through online stores. Using a non-MOVA garage may cause issues during recharging.
Green Light
background
14
EN
4 Preparation for First Use
Controls
Button Function
Power
To turn the robot on, install the security key and turn it to the ON position. Press and hold the
button for 2 seconds to turn the robot on.
To turn o the robot, ensure the robot is outside the charging station, press and hold the
button for 2 seconds, and rotate the security key to the OFF position.
Start
To start all-area mowing or resume paused tasks, press the button, then press the OK
button in 5 seconds.
Home
To send the robot back to the charging station to charge, press the button, then press
the OK button in 5 seconds.
OK
To deactivate the safety lock and enable app control, press the OK button twice.
To enable Bluetooth pairing mode, press and hold the OK button for 3 seconds.
Start + OK
To factory reset the robot, press and hold and the OK button together for 3 seconds.
Stop
Press the Stop button to stop the robot and activate the safety lock. App control will be
disabled. Press the OK button twice to deactivate the safety lock.
Start + Home
To turn o Child Lock, press both the and buttons at the same time. The robot will
announce: "Child Lock is turned o".
Power on/o
Robot Status Indicator
App Connection Indicator
Child Lock Indicator
Start Home OK
4.1 Get Familiar with the Control Panel
background
EN
15
Before turning the robot on for the rst time, there are some basic settings to do before the robot is ready to
start working.
• Rotate the security key to the ON position before turning on the robot.
• Rotate the security key to the OFF position; the robot will shut down automatically.
• You can take out the security key when it's in the OFF position. The robot cannot be turned on without the key.
Note: If you lose the security key, please reach out to the after-sales team for a replacement.
OFF
ON
OFF
ON
Security Key
Indicator Lights on the Control Panel
Indicator Colour Meaning
Robot Status
Blinking green The robot is charging in the charging station.
Solid green The battery is fully charged.
Solid red
1. An error has occurred.
2. The emergency stop button is pressed.
Blinking blue
1. The robot is performing a task or is paused.
2. The robot is initialising after power-on.
Solid blue The robot is on standby.
App Connection
Solid blue The robot is connected to the app.
Blinking blue The robot is connecting to the app.
Child Lock
Solid blue
The control panel is locked via the app. (You
can enable the "Child Lock" function in the
app.)
4.2 Initial Settings
background
16
EN
3
Connect the Robot to the Internet
Please scan the QR code to download the MOVAhome app on your mobile device. After the installation,
please create an account and log in.
1 Open the top cover, then rotate the security key to the ON position.
OFF
ON
2
Press and hold
on the control panel for 2 seconds to turn on the robot.
Notes
• After power-on, the robot will begin initialisation, indicated by a blinking blue status light
on the control panel. When the startup sound plays and the status light turns solid blue, the
initialisation process is complete.
• The robot will automatically turn on when it docks in the charging station.
Important: To turn on the robot, ensure the security key is installed and set to the ON position. If not, the robot
cannot be powered on.
2S
You can also download MOVAhome app from App Store or Google Play.
background
EN
17
Before network setup:
• Make sure that both the robot and your mobile device are within range of the same Wi-Fi network.
• Make sure that your mobile device is within 10 m of the robot.
• Enable Bluetooth function on your mobile device.
1. Open the MOVAhome app.
2. You can connect via one of the following methods:
a. Scan the QR Code: Go to
Device and tap Scan QR code to connect. Scan the QR code located
inside the robot's top cover to connect.
b. Add Manually: Go to
Device and tap Add. Then select your robot model to connect.
3. Please follow the in-app instructions to complete the Wi-Fi network connection.
Important
• Please use a single-band network of 2.4 GHz frequency or dual-band network of 2.4/5 GHz frequency.
• Make sure your Wi-Fi network doesn't have a rewall and isn't encrypted. Otherwise, the network setup may
fail.
4. Press and hold the OK button on the control panel for 3 seconds. The robot will enter Bluetooth pairing
mode.
Note: Ensure the robot has completed initialisation before pressing the OK button. Initialisation is complete
when the startup sound plays and the status light
turns solid blue. Pairing cannot proceed until
initialisation is complete.
5. Please follow the in-app instructions to complete the pairing.
Notes
• The App Connection indicator
on the control panel will show a solid blue light when the robot is
successfully connected to the app.
• You can also purchase the Link Module to remotely control the robot without Wi-Fi connection.
background
18
EN
Before mapping, please ensure the following:
• The battery level of the robot is more than 50%.
• The weather is clear and dry, with sucient light.
5 Map Your Garden
How to unbind the robot?
How to log out of your MOVAhome account or delete it?
How to reset your robot?
How to share your robot?
The robot is automatically bound to the MOVAhome account once pairing is successful. Each device can only
be bound to one account. It cannot be bound to another account at the same time.
To pair the robot with a new account, you need to unbind it rst. To unbind it:
1. Open the MOVAhome app. Go to
Device.
2. Locate your robot's name. If you have multiple robots bound to your MOVAhome account, swipe left or
right to access the page of the robot you want to edit.
3. Tap
next to the robot's name.
4. Select Delete.
Important: Once the robot is unbound, all user data from the robot will be permanently erased from the server.
1. Go to
Me > Account.
2. Select Log Out or Delete Account.
1. Tap
next to the robot's name.
2. Select Device Sharing.
Note: You can manage user access for specic functions in Settings > Device Sharing.
Press and hold
and OK simultaneously for 3 seconds to factory reset the robot.
Important: All stored data on the robot will be permanently erased.
• The robot's front camera is clean and unobstructed.
• The robot correctly docks in the charging station.
Important
– Do not manually move the robot when creating the boundary, as this may cause the mapping to fail.
– When the mapping begins, do not remotely dock the robot in the charging station until the mapping process is
complete. Otherwise, the front camera may be blocked, which can cause the mapping to fail.
background
EN
19
• The robot can navigate slopes with an incline up to 40% (22° ). However, for better mowing results, it is
recommended to keep the slopes of work areas below 25% (14° ).
• For areas narrower than 60 cm, please set them as paths to allow the robot to pass through (see section 5.4:
Set Path
).
≤25% (14°)
≥ 60cm
• If the lawn’s perimeter is more than 4 cm higher than the surrounding ground or has a steep slope, keep
the robot at least 10 cm away from the edge during mapping. If the perimeter is level with the surrounding
ground, the robot can cross it for optimal edge mowing.
>4cm
>10cm
≤5 m
• Walk within 5 m behind the robot during the mapping process.
background
20
EN
5.1 Create the Virtual Boundary
1 Tap Start Mapping via the app, and the robot will check its status and calibrate. It will automatically
leave the charging station to do the calibration. Please be careful.
• Make sure the turning angles are greater than 90° . Angles smaller than 90° can make it dicult for the
robot to achieve a clean cut.
• To map the lawn boundaries correctly, always have the robot follow the outer edge of the lawn. Do not
create zones in the middle of an open lawn area, as this can lead to positioning errors.
background
EN
21
2 Guide the robot to the perimeter of your lawn using remote control. If the perimeter is elevated or has
a steep slope, make sure to leave 80 cm of clearance to allow space for calibration rotation. Then tap Set
Starting Point to establish the starting point for the boundary. The robot will rotate in place to calibrate its
position.
80cm
3 Guide the robot remotely to move along the perimeter of your lawn to map out the work area.
4 When the robot returns to within 1 m of the starting point, you can tap Close Boundary and the boundary
will automatically be completed. If the perimeter is elevated or has a steep slope, make sure to leave 80 cm
of clearance to allow space for calibration rotation.
Note: If the boundary fails to close or you encounter an error, remotely guide the robot a short distance forward
along the edge, then retry closing the boundary.
Auto Boundary Detection
Powered by an advanced AI algorithm, the robot uses its front camera to distinguish grass from non-grass
areas under proper conditions, automatically mapping the lawn perimeter without manual guidance.
After guiding the robot remotely to the lawn edge and setting the starting point, you can use Auto Boundary
Detection mode. You can choose whether the robot should cross the perimeter for cleaner edge cutting
results or stay close to it to avoid getting stuck.
We recommend following the robot during this process. If the robot fails to accurately detect the boundaries,
you can exit Auto Boundary Detection mode and switch to remote control at any time.
Important: Auto Boundary Detection works best on clearly dened lawn edges. Unclear boundaries may
not be recognised successfully.
background
22
EN
5.3 Create More Zones and Expand Existing Zones
• To Create More Zones
If your lawn is separated by roads or you have several isolated lawns, you can tap Set zone in the app
to continue creating work areas. You can also add, delete or modify the zones in
> Map Editing
when the map is finished.
Note: If your garden has stone paths, designate them as separate zones. Then draw linking paths so
the robot can navigate between zones.
Important: To map the lawn boundaries correctly, always have the robot follow the outer edge of the
lawn. Do not create zones in the middle of an open lawn area, as this can lead to positioning errors.
• To Expand Existing Zones
To expand an existing zone, tap Set zone in the app to create the area you want to include. If the two areas
overlap, they will be automatically merged. Alternatively, you can go to
> Map Editing > Set zone after
mapping is complete to expand an existing zone.
5.2 Set No-Go Zone
Though the robot can automatically avoid obstacles, it is still necessary to set areas with a risk of falling, such
as swimming pools and sandpits, as no-go zones. For objects you want to protect (such as a owerbed, a
trampoline, a vegetable patch or an exposed tree root), please set them as no-go zones. You can tap Set no-
go zone in the app to continue creating no-go zones. Alternatively, you can go to
> Map Editing to create
or delete the no-go zones after the map is nished.
Note: Areas frequently visited by animals can be designated as "Animal-Active Area" to prevent the robot from
entering and ensure the safety of the animals.
background
EN
23
5.4 Set Path
• To Connect Two Isolated Work Zones
For isolated areas, please create paths to connect them, otherwise they will be inaccessible to the robot. Tap
Set path to create a path.
Important: Ensure the path starts and ends on grass-covered surfaces within the work area. Do not set
either endpoint on non-grass surfaces.
For isolated zones, please create a path to connect them. Isolated zones without a path will be inaccessible
to the robot.
Note: By default, the robot only moves along the path without mowing the grass.
Important: If your lawn is divided by passages higher than 4 cm, place an object with a slope equal in
height to the passage (such as a ramp).
≥4cm
• To Connect the Work Area and the Charging Station
If your charging station is not in the work area, a path should be created to connect it to the work area. Tap
Set path to create a path that allows the robot to return to the charging station.
Important
– Ensure one end of the path is on a grass-covered surface within the work area, and the other is directly in front
of the charging station. It's advisable to align the path with the charging station.
– When creating paths to connect the work area and the charging station, do not remotely dock the robot in the
charging station. Otherwise, the front camera may be blocked, which can cause the mapping to fail.
background
24
EN
5.5 Finish Map
Tap Finish Map when work areas, paths and no-go zones are completed.
5.6 Add a Second Map
Dual Map Feature
The Dual Map feature is designed for situations where the robot cannot autonomously travel between
separate lawns or when multiple maps are necessary.
You may need to create a second map if:
• Your front and back lawns can't be connected.
• There's a signicant elevation dierence between lawn areas.
• You have multiple properties but only one robot.
• Your lawn area is too large for a single map.
Note: If your lawns are connected and within the robot's capacity, use a Multi-Zone setup instead.
Map1
Map2
background
EN
25
6.1 Start Mowing for the First Time
Tips before mowing:
• Use a push mower to mow the grass to a height of no more than 10 cm.
• Clear the obstacles including debris, leaf piles, toys, wires and stones from the lawn. Make sure no children
or pets are on the lawn when the robot is mowing.
• Level any depressions in the lawn.
• Set your mowing preferences in the app in advance (such as mowing eciency).
6 Operation
Before mapping the second lawn, please keep the following in mind:
• Always start mapping from the charging station for both maps.
• Second Charging Station (Optional):
– If you have purchased a second charging station, install it on the second lawn.
– If not, move the robot and its charging station manually to start mapping the second lawn.
Map the Second Lawn
After completing the rst map, tap Add Map to continue creating the second one. Alternatively, you can
navigate to
> Map Editing and tap Add Map after mapping is complete. Once you have nished the
second map, you can switch between maps through > Map Editing.
background
26
EN
1. Open the top cover to access the control panel.
2. Turn the knob on the robot to adjust the mowing height (20 mm–60 mm).
3. Press
, then press the OK button in 5 seconds. The robot will leave the charging station and start all-
area mowing. You can also tap Start in the app to start mowing.
4. Close the top cover.
Note: Before starting the mowing process, ensure that the weather is clear and dry, and that there is adequate
lighting.
OR
6.2 Mowing with Dual Maps
• With One Charging Station:
• With Two Charging Stations:
How to Handle Low Battery or Charging Issues?
1. Always place the charging station exactly where it was during mapping. Manually move the robot to the
map you want to mow.
2. Select the correct map in the app before beginning mowing tasks to ensure proper operation.
Note: After switching the map, the schedules and mowing settings of the current map will be applied.
Relocation of the charging station is not necessary.
1. Manually move the robot to the map you want to mow.
2. Select the correct map in the app before beginning mowing tasks to ensure proper operation.
If you don't manually relocate the charging station along with the robot to the second map, the robot might
deplete its battery and prompt a charging failure since it can't locate the charging station. To resolve this
issue, please follow these steps:
1. Manually move the robot to the map with the charging station for recharging.
2. After charging, return the robot to the original map. It will resume mowing automatically.
Important: Do not change the map in the app during this. This ensures the robot remembers its last position
and can continue where it left o.
3. Repeat these steps as needed until the entire lawn is mowed.
background
EN
27
6.3 Pause
To pause the current mowing task, you can press the Stop button on the robot or tap Pause in the app.
Note: The robot cannot be started directly through the app after the Stop button is pressed. To resume app
control, press the OK button twice on the control panel to deactivate the safety lock rst.
6.4 Resume
To resume a paused task, press , then press the OK button in 5 seconds. You can also tap Continue in the
app to resume the mowing task.
OR
6.5 Return to the Charging Station
OR
OR
To stop the mowing task and send the robot back to the charging station, press the button, then press
the OK button in 5 seconds on the control panel. You can also tap Recharge in the app to send the robot
back to the charging station.
background
28
EN
Where You Can Explore More
MOVAhome app is more than a remote control. There are many things you can do through the app:
completing various settings remotely, experiencing dierent mowing modes, editing the map freely and
adjusting mowing schedules.
7 MOVAhome App
7.1 Mowing Modes
The robot oers various mowing modes. You can switch between modes through the app including All-Area
Mowing, Zone Mowing, Edge Mowing, Spot Mowing and Manual Mode.
7.2 Mowing Shapes
Customise your lawn by adding shapes through > Map Editing > Shapes in the app. Dened shapes
will be excluded from mowing in all mowing modes. You can modify their position, size, or remove them in
Shapes.
7.4 Child Lock
If you worry that children may operate the robot, navigate to Settings and enable the Child Lock function in
the app. Alternatively, you can tap
on the mowing page. With this function enabled, the control panel will
be locked. To deactivate it, press
and simultaneously on the control panel.
Since each map has its own schedule, carefully plan and set up the scheduled tasks for each map to prevent
overlaps or conicts. This ensures that the robot operates eciently and is available as needed for each map.
Schedules with Dual Maps
7.3 Schedule
After the rst map is completed, the robot automatically creates two weekly mowing schedules, which are
"Spr/Sum Schedule" and "Aut/Win Schedule". You can tap in the app to do detailed schedule settings.
With the schedule function, you can completely leave the daily mowing work to the robot. You only need to
maintain the robot regularly.
Note: If you worry that the robot may disturb you or your neighbours when it works autonomously during
certain hours, you can go to Settings > Do Not Disturb and set Do Not Disturb time in the app.
background
EN
29
7.6 Frost Protection
If the temperature drops below 6° C, mowing can permanently damage the lawn. The battery will not
charge as a safety measure. To prevent this, you can enable the Frost Protection feature in the Settings
through the app. This will automatically pause mowing and send the robot back to the charging station
when the temperature falls below 6° C. The robot will resume mowing once the temperature rises above
11° C.
7.7.1 Lift Alarm
7.7 Security Features
With this function enabled, an alarm will go o immediately when the robot is lifted, and the robot will be
locked. To resume app control, press the OK button twice on the control panel to deactivate the safety lock
rst.
The robot supports multiple anti-theft features to ensure secure operation and protect against unauthorized
use. Additionally, the stereo vision camera can detect human presence, making the robot an eective
garden guardian.
7.5 Rain Protection
If you worry that adverse weather conditions may aect the mowing work, you can enable Rain Protection
function in Settings in the app. When this function is enabled, the robot automatically pauses mowing and
returns to the charging station if rain is forecast. You can set the rain delay time in the app.
Note: Mowing wet grass can damage your lawn. We recommend setting a rain delay time to keep the robot
in the charging station for a period after the rain stops, allowing the grass to dry completely before mowing
again.
7.7.2 O-Map Alarm
With this function enabled, the robot will be locked and an alarm will go o immediately if it is away from
the map. (This function requires installation of Link Module.)
background
30
EN
7.7.3 Real-Time Location
7.7.4 Human Presence Detection Alert
7.7.5 Garden Guardian
7.7.6 Patrol
7.8 Custom Charging Period
With Link Module, you can view the current location of the robot in Google Maps.
When enabled, the robot will notify you upon detecting human presence.
Tap
to view a live video feed from the robot's front camera, allowing you to monitor your garden
anytime, anywhere.
While the robot is on standby, you can send it to patrol specic boundaries or spots in your garden via the
app. To access this feature, go to
> Patrol.
To customise the robot's charging period to specic hours, you can enable the Custom Charging Period
function through Settings > Charging in the app. When enabled, the robot keeps a safe battery level when
idle and fully charges only during the designated charging period.
Note: MOVA development team will continuously conduct OTA (Over-the-Air) updates and maintenance
on the rmware and app. Please check for update notications or enable the Auto-update function to keep
the rmware and app up-to-date and enjoy more features.
Indicator Light on the Front Camera
LED Indicator Light Colour Meaning
Blinking green
1. Live video from the front camera is being streamed to the app.
2. The robot is in patrol mode.
background
EN
31
8 Maintenance
For better performance and lifespan of the robot, please clean it regularly and replace worn parts according
to the frequency below:
8.1 Cleaning
Warning: Before cleaning, please turn o the robot and rotate the security key to the OFF position.
Unplug the charging station.
Caution: When turning the robot over, be careful not to scratch the camera lens.
Part Replacement Frequency
Blades Every 6–8 weeks or sooner
Notes
• You can check the remaining time for blades by navigating to Settings > Consumables & Maintenance in
the app. After replacing any consumables as prompted, go to the details page for the consumable and tap
I've Replaced It to reset the timer.
• If you have designated areas in your garden for routine robot cleaning and servicing, you can set
Maintenance Points on the map by navigating to Settings > Head to Maintenance Point > Edit Point. Once
the maintenance points are set, you can simply tap Go and direct the robot to the designated locations for
easy servicing.
• The Housing, Chassis and Blade Disc:
1. Turn the robot o and rotate the security key to the OFF position.
OFF
ON
Regularly clean your robot to prevent grass clippings and dirt from accumulating and clogging the blade
disc and drive wheels, which can aect its mowing, docking, and movement performance. We recommend
using a cleaning kit, which can be purchased at local retailers or through online stores.
2. Put the robot on a soft surface and turn it upside down.
background
32
EN
3. Clean the housing, blade disc and chassis with a hose.
Warning: Do not touch the blades when cleaning the chassis. Please wear protective gloves when cleaning.
Caution: Please do not use a high-pressure washer for cleaning. Do not use detergents for cleaning.
Important: For optimal positioning and navigation, clean the front camera once every two weeks.
• Drive Wheels:
Use a brush to remove mud from the wheels to ensure good grip.
• Charging Contacts and Front Camera:
Use a clean cloth to wipe the charging contacts on the robot and charging station, and also clean the front
camera. Keep the charging contacts and the front camera dry after cleaning.
background
EN
33
8.2 Replacing the Components
• Replacing the Blades
To keep the blades sharp, please replace the blades regularly. It is recommended to replace the blades
every 6–8 weeks or sooner. Please only use the MOVA genuine blades.
Warning:Please turn o the robot and rotate the security key to the OFF position. Wear protective
gloves before replacing the blades.
Note: Please replace all three blades at the same time to ensure a balanced cutting system.
Caution: When turning the robot over, be careful not to scratch the camera lens.
1. Turn o the robot and rotate the security key
to the OFF position.
2. Put the robot on a soft surface and turn it
upside down.
OFF
ON
5. Align the new blades with the holes on the
blade disc, then secure them with the screws.
6. Make sure the blades can rotate freely.
3. Loosen the screws using a Phillips screwdriver.
4. Remove the three blades and screws.
background
34
EN
9 Battery
Low-Power Charging Mode:
When the low-power charging mode is activated, functions unrelated to charging will be disabled (the
network will be turned o).
• To enable low-power charging mode, press and hold the
button and the button simultaneously, and
press the OK button 5 times quickly at the same time. You will hear a voice prompt: Low-power charging mode
is on.
• To disable low-power charging mode, restart the robot.
For long-term storage, charge the robot every 6 months to protect the battery. Battery damage caused by
over-discharge is not covered by the limited warranty. Do not charge the battery at an ambient temperature
above 45° C or below 6° C. The long-term storage temperature for the battery should be between -10 and
35° C. To minimise the damage, the recommended storage temperature for the battery is between 0 and
25° C.
Note: The lifespan of the robot's battery depends on frequency of usage and hours of operation. If the
battery is damaged or cannot be charged, do not dispose of the obsolete or faulty battery arbitrarily. Please
obey local recycling regulations.
10 Winter Storage
11 Transport
• The Robot
1. Charge the battery fully. Turn the robot o and rotate the security key to the OFF position.
2. Clean the robot thoroughly before putting it into storage in winter.
3. Store the robot inside in a dry place, at a temperature above 0° C.
• Charging Station
Unplug the charging station and store it in a dry and cool place, away from direct sunlight.
Note: After winter storage, please reinstall the charging station and place the robot in it to charge. If you
reinstall the charging station in a dierent location, the robot will automatically update the station's location
as soon as it charges and leaves the station. If you encounter positioning errors because of major changes
in your garden, it's recommended to remap the area.
For long distance transport, ensure that the robot is turned o. It is recommended to use the original
packaging.
Warning
• Please turn the robot o and rotate the security key to the OFF position before transporting it.
• Lift the robot by the rear handle, keeping the blade disc away from your body.
background
EN
35
12 Troubleshooting
Issue Cause Solution
The robot is not connected
to the app.
1. The robot is not within Wi-
Fi signal coverage or Bluetooth
range.
2. The robot is turned o or is
restarting.
1. Check if the robot has completed the process of
turning on.
2. Check if the router is working properly.
3. Move closer to the robot to establish a Bluetooth
connection.
Robot lifted. The wheel is not on the ground.
1. Put the robot back on at ground.
2. Press the OK button twice to unlock the robot.
3. The robot can't cross objects higher than 4 cm. Please
keep the ground even where it is working.
Robot tilted. The robot tilts more than 37° .
1. Put the robot back on at ground.
2. Press the OK button twice to unlock the robot.
3. The robot cannot climb slopes greater than 40% (22° ).
Robot trapped.
The robot is trapped and fails to
get out.
1. Remove the surrounding obstacles and then retry.
2. Manually move the robot to a at and open place inside
the map and try starting the task again. If you continue to
encounter this problem, please retry after the robot is in the
charging station.
3. Check if there are holes in the ground. Fill in the holes
before mowing to prevent the robot from being trapped.
4. Check if the surrounding grass is taller than 10 cm. You
can adjust the obstacle avoidance height or use a push
mower to mow the lawn in advance to prevent the robot
from being trapped.
5. If the robot is often trapped in this location, you can set it
as a no-go zone.
Left/right drive wheel error.
The wheel cannot rotate or the
wheel motor has a problem.
1. Clean the drive wheels and then retry.
2. If you continue to encounter this error, try restarting
the robot.
3. If the problem persists, please contact the after-sales
service.
Blade disc can't rotate.
The blade disc cannot rotate
normally or the cutting motor
has a problem.
1. Clean the blade disc and then retry.
2. Check if the surrounding grass is taller than 10 cm.
You can use a push mower to mow the lawn in advance
to prevent the blade disc from being blocked by tall
grass.
3. Check if there is water under the blade disc. If there is
any, move the robot to a dry place and then retry.
4. If you continue to encounter this error, try restarting
the robot.
5. If the problem persists, please contact the after-sales
service.
Charging error.
The robot docks in the charging
station, but the charging current
or voltage has a problem.
1. Check if the charging station is correctly connected to
power.
2. Check if the charging contacts on the robot and
charging station are clean.
3. After checking is nished, try docking the robot in the
charging station again.
4. If the problem persists, please contact the after-sales
service.
background
36
EN
Issue Cause Solution
Battery temperature too
high.
Battery temperature is ≥ 60℃ .
1. Use the robot where ambient temperature is below
40℃ . You can wait until the battery temperature
decreases automatically.
2. You can turn o the robot and restart it after a while.
3. If the problem persists, please contact the after-sales
service.
Battery temperature is high. Battery temperature is ≥ 45℃ .
1. Charging may fail when battery temperature is above 45℃.
2. Use the robot where ambient temperature is below 40℃ .
Battery temperature is low. Battery temperature is ≤ 6℃ .
1. Charging may fail when battery temperature is below 6℃.
2. Use the robot where ambient temperature is above 6℃ .
Robot is lost. Positioning is lost.
1. Check if the front camera of the robot is dirty. Dirt will
aect the positioning.
2. Manually move the robot to an open place inside the
map and try starting the task again.
3. If the positioning is not recovered, remote control the
robot back to the charging station via the app, and then
start the mowing task.
Sensor error. Sensor error.
1. Restart the robot and retry.
2. If the problem persists, please contact the after-sales
service.
The robot is in the no-go
zone.
The robot is in the no-go zone.
1. Manually move the robot out of the no-go zone and
then retry.
2. Remotely control the robot through the app to move
it out of the no-go zone, and then retry.
The robot is outside the
map.
The robot is outside the map.
1. Manually move the robot inside the map, and then
retry.
2. Remote control the robot back inside the map via the
app, and then retry.
Emergency stop is
activated.
The Stop button on the robot is
pressed.
Press the OK button twice to unlock the robot.
Low battery. The robot will
shut down soon.
Battery level is ≤ 10%. Dock the robot in the charging station to charge.
The robot is away from the
map. Risk of being stolen.
The robot is away from the map.
1. Manually move the robot back to the work area.
2. You can disable the O-Map Alarm in Settings in the
app.
Failed to return to the
charging station.
The robot cannot nd the
charging station when returning
to the charging station.
1. Check if there are obstacles blocking the robot.
Remove the obstacles and retry.
2. Ensure there is adequate lighting and that the
weather is clear (i.e., no rain or fog). Adverse weather
may aect the robot’s ability to return.
3. Conrm that the map currently in use in the app
matches the robot's operating location. If it does not,
switch to the appropriate map in the "Map Editing"
section.
4. Ensure that a charging station is installed within the
map currently in use.
5. Remote control the robot back to the charging station
via the app.
Failed to dock in the
charging station.
The robot nds the charging
station but fails to dock.
1. Ensure there is adequate lighting and that the
weather is clear (i.e., no rain or fog). Adverse weather
may aect the robot’s ability to dock.
2. Check if the reective lm on the charging station is
dirty or blocked.
3. Check if there are obstacles in front of the charging
station.
background
EN
37
Issue Cause Solution
Failed to dock in the
charging station.
The robot nds the charging
station but fails to dock.
4. Check if the charging station is moved.
5. Check if the baseplate is covered with thick mud.
6. Check if the charging station is on a slope.
7. Check if the charging station has power.
8. Help the robot dock in the charging station using the
remote control or manually.
Positioning failed.
Positioning fails when the robot
tries to start a mowing task.
1. Ensure there is adequate lighting and that the
weather is clear (i.e., no rain or fog). Adverse weather
may aect the robot’s positioning.
2. Manually move the robot to a at and open place
inside the map and try starting the task again.
3. If you continue to encounter this error, please retry
after the robot is docked in the charging station.
4. If the positioning failure continues, move the
charging station to an open location and perform a
remapping.
Insucient space for
turning in front of the
station.
Insucient space for turning in
front of the station.
1. If the station is placed at the edge of the map or
within it, ensure there is at least 1 m of free space
between the front area of the station's baseplate and
the boundary of the map; otherwise, the robot may not
be able to make turns.
2. Relocate the station, or change the map in Map
Editing.
Path obstructed. Path obstructed.
1. Check if a no-go zone is set in the path.
2. Check if there are obstacles blocking the robot.
3. If the robot still cannot pass, delete the path in Map
Editing and set a new one.
There is an issue with the
front camera.
There is an issue with the front
camera.
1. Wipe the front camera with a clean cloth.
2. Try restarting the robot.
3. If the problem persists, please contact the after-sales
service.
Front camera blocked. Front camera blocked.
1. Ensure the front camera is unobstructed before
retrying.
2. If the camera is dirty, clean it with a soft cloth before
retrying.
Weak positioning signal. Weak positioning signal.
1. Ensure that the weather is clear. Heavy rain or low
light may interfere with the robot’s positioning. The
robot will resume operation once the positioning signal
is restored.
2. If the issue persists, use remote control mode and
guide the robot back to the charging station manually
before starting tasks.
Boundary detection error
occurs during Auto-
Mapping.
Boundary detection error occurs
during Auto-Mapping.
1. Ensure that the lighting conditions are suitable,
neither too bright nor too dim.
2. Conrm that the weather is clear, avoiding fog or
rain.
3. Ensure that the front camera is clean and
unobstructed.
4. Ensure that the ground surface is even, as bumps
may aect detection.
5. If boundary detection continues to fail, switch to
remote control mode for mapping.
background
38
EN
13 Specications
Basic information
Product name MOVA ViAX Series
SKU ViAX 250 ViAX 300
Model MVVV1100 MVVV1200
Dimensions 595 × 380 × 272 mm
Robot weight (battery
included)
9.4 kg
Mowing
Recommended working
capacity
250 m² 300 m²
Mowing eciency
1
Standard: 300 m²/day
Ecient: 500 m²/day
Mowing height 20–60 mm
Mowing width 20 cm
Charging time
2
45 min
Mowing time per charge
3
50 min
Noise emissions
Sound power level LWA 57 dB(A)
Sound power uncertainties
KWA
3 dB(A)
Sound pressure level LpA 49 dB(A)
Sound pressure uncertainties
KpA
3 dB(A)
Working condition
Operating temperature
0–50° C
Recommended: 10–35° C
Long-term storage
temperature
-10–35° C
Recommended: 0–25° C
IP-classication
Robot: IPX6
Charging station: IPX4
Power supply: IP67
Maximum slope for mowing
area
40% (22° )
Connectivity
Bluetooth frequency range 2400.0–2483.5 MHz
Max. RF Power
802.11b:16±2dBm(@11Mbps)
802.11g:14±2dBm(@54Mbps)
802.11n:13±2dBm(@HT20,HT40)
Bluetooth: 7.49dBm
background
EN
39
1. Based on testing by MOVA Laboratory.
2. Charging time applies when the robot automatically returns to the charging station at low battery.
3. Based on testing by MOVA Laboratory.
4. Requires the installation of Link module.
5. Requires the installation of Link module.
6. The ViAX 250 and ViAX 300 are compatible with both the MBPM10 (2.5 Ah) and MBPM20 (5 Ah) batteries.
Note: The specications are subject to change as we continually improve our product. For the latest information,
please visit our website at https://www.mova.tech.
Connectivity
Wi-Fi
Wi-Fi 2.4 GHz
(2400–2483.5M)
Link service (optional)
4
LTE-FDD: B1/3/7/8/20/28A
LTE-TDD: B38/40/41
GNSS (optional)
5
GPS/GLONASS/BDS/Galileo/QZSS
Cutting motor Speed 2500/min
Battery (robot)
Battery model
6
MBPM10
Battery type Lithium-ion battery
Rated capacity 2.5 Ah
Rated voltage 18 V DC
Power supply
Charger model MPAM10/MPAM20/MPAM20(c)
Input voltage 100~240 V AC
Output voltage 20 V DC
Output current 1.5 A/3 A
Charging station
Charging station model MCV20
Input voltage 20 V DC
Output voltage 20 V DC
Input current 1.5 A/3 A
Output current 1.5 A/3 A
Accessories
Spare blades and
screws
9
Blade model MBKM10 (MOVA)
Drive wheels Wheel type O-road

Specifications

Mova VIAX 250 Questions and Answers

Questions and Answers

Related Products