ATTACH YOUR RECEIPT HERE
4007498
Purchase Date
Questions, problems, missing parts?
Before returning contact us on:
800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
ITEM #5709395
5709397
MODEL #TGII52BNK5LR
TGII52MBK5LR
BEACH CREEK II
LED CEILING FAN
Español p. 21
1
2
Safety Information ...................................................................................................................................
.
. 2
Package Contents .................................................................................................................................... 5
Hardware Contents
.................................................................................................................................................
6
Preparation ............................................................................................................................................... 6
Initial Installation ....................................................................................................................................... 6
Downrod-Style Fan Mounting ................................................................................................................... 8
Closemount-Style Fan Mounting .........................................................................................................
.
.. 11
Wiring ..................................................................................................................................................... 12
Final Installation ..................................................................................................................................... 14
Operating Instructions ............................................................................................................................ 17
Care and Maintenance ......................................................................................................................
.
.... 19
Troubleshooting ...................................................................................................................................... 20
Limited Lifetime Warranty ....................................................................................................................... 21
Replacement Parts List .......................................................................................................................... 21
TABLE OF CONTENTS
CAUTION: Changes or modifications not approved by the party responsible for compliance could void
the user's authority to operate the equipment.
*NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, (2) this device must accept any interference received,
including interference that may cause undesired operation.
Distributed by: Litex Industries Inc., P.O. Box 535639, Grand Prairie, TX, 75050; 800-527-1292
NOTE: Dimmable to 10%.
SAFETY INFORMATION
3
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, install or operate
the product. Review the accompanying assembly diagrams.
• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for
repairs, it must be shipped in its original packaging to ensure proper protection against damage that
might exceed the initial cause for return.
• Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code
and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you
are unfamiliar with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the
floor and at least 30 in. from the end of the blades to any obstruction.
• After you install the fan, make sure all connections are secure to prevent the fan from falling.
• The net weight of this fan including the light kit is: 15.87 lbs.
SAFETY INFORMATION
To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box
marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. OR LESS" and use mounting
screws provided with the outlet box. Most outlet boxes commonly used for the support of
lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified
electrician if in doubt.
When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a plastic
outlet box. Secure the outlet box directly to the building structure. The outlet box and its support must
be able to support the moving weight of the fan (at least 35 lbs.).
To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are
designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire
is larger than 12-gauge or there is more than one house wire to connect to the corresponding fan lead
wires, consult an electrician for the proper size wire connectors to use.
WARNING
DANGER
When using an existing outlet box, make sure the outlet box is securely attached to the building
structure and can support the full weight of the fan. Failure to do this can result in serious injury or
death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after
installation is complete.
To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the fan,
including the blades.
Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid
electrical shock.
4
SAFETY INFORMATION
CAUTION
Be sure outlet box is properly grounded and that a ground wire (GREEN or BARE) is present.
Once installation is complete, carefully check all screws, bolts and nuts on fan motor assembly to
ensure that they are secured.
Do NOT tamper with or attempt to repair LED component. The light source is designed for this specific
application and should not be serviced by untrained personnel. If any servicing is required, call our
customer service department.
To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp
edges.
To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control
device or control fan speed with a full range dimmer switch.
To reduce the risk of fire, electrical shock or personal injury, do not bend the blades when installing or
balancing them or when cleaning the fan. Do not insert objects between the rotating fan blades.
To reduce the risk of personal injury, use only parts provided with this fan. The use of parts OTHER
than those provided with this fan will void the warranty.
WARNING
K
PACKAGE CONTENTS
5
A
D
B
F
C
M
L
J
I
E
P
O
H
G
A Downrod 1
B Canopy 1
C Mounting Bracket 1
D Motor Housing 1
E Yoke Cover 1
F LED Light Kit (preassembled) 1
G Canopy Mounting Screw/ 4
Lock Washer (preassembled)
H Motor Plate Screw 6
(preassembled)
I Lock Washer (preassembled) 6
DESCRIPTIONPART
QUANTITY
IMPORTANT REMINDER: You must use the
parts provided with this fan for proper installation
and safety.
DESCRIPTIONPART
QUANTITY
J Blade 5
K Shade 1
L Pin (preassembled) 1
M Clip (preassembled) 1
N Remote Control Receiver 1
O Remote Pack 1
P Additional Wiring 1
N
6
HARDWARE CONTENTS (shown actual size)
Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on
foam to avoid damage to finish. Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses,
Stepladder and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and Wire
Cutters
PREPARATION
Fiber Blade
Washer
Qty. 15
+ 1 extra
Blade
Screw
Qty. 15
+ 1 extra
AA
BB
Turn off circuit breakers or fuse and wall switch to
the fan supply line leads.
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
INITIAL INSTALLATION
ON
OFF
ON
OFF
1
CC
Lever Wire
Connector
Qty. 3
CC
3.
Determine mounting method to use.
A. Downrod mount (standard or angled ceiling).
B. Closemount (standard ceiling only).
IMPORTANT: If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle-style mounting is best suited for
angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance. Closemount mounting is more suitable
for ceilings lower than 8 ft. high.
Check to make sure blades (J) will be at least
30 in. from any obstruction and at least 7 ft.
above the floor.
4.
2.
2
If applicable, remove existing fan and fan parts,
including the mounting bracket, from outlet box
and disconnect all electrical wiring.
WARNING: To reduce the risk of personal
injury, use ONLY parts provided with your new
fan. The use of parts OTHER than those
provided with this fan will void the warranty.
Set aside screws, spring washers and flat
washers provided with the outlet box for fan
installation.
INITIAL INSTALLATION
7
A
B
3
19° max.
7 ft.
min.
30 in.
min.
J
4
D
I
H
INITIAL INSTALLATION
8
5.
Remove 6 motor plate screws (H) and 6 lock
washers (I) from top of motor housing (D).
Remove the yoke plate and motor plate from
motor housing (D).
Slide one blade (J) through one of the
rectangular openings on center band of motor
housing (D). Align holes in blade (J) with holes
in blade arm located inside of motor housing (D).
Attach blade (J) with 3 blade screws (AA) and
fiber washers (BB). Repeat for remaining blades
(J). NOTE: Make sure to completely secure
each blade (J) before proceeding to the next.
6.
7.
Reattach motor plate and yoke plate to
motor housing (D) with lock washers (I) and
motor screws (H) previously removed in
Step 5.
Hardware Used
Blade Screw x 15
AA
Fiber Blade Washer x 15
BB
5
motor
plate
yoke plate
7
6
J
AA
BB
blade
arm
motor plate
D
yoke plate
I
H
9
INITIAL INSTALLATION
8
Open End
Wall
Screw
Position
C
C
Secure mounting bracket (C) to outlet box
(not included) using the screws, spring
washers and flat washers provided with the
outlet box. [These may have been
previously removed in Step 2, page 7.]
WARNING: It is very important you
use the proper hardware when installing
the mounting bracket as this will support
the fan.
DANGER: To reduce the risk of
serious injury or death, the outlet box
screws MUST be installed somewhere
within the long slots of the mounting
bracket and then TIGHTENED DOWN
COMPLETELY.
IMPORTANT: If using the angle mount,
make sure open end of mounting bracket
(C) is installed facing the higher point of the
ceiling, and ensure the ceiling angle is not
steeper than 19°.
For DOWNROD-STYLE FAN MOUNTING,
proceed to step 1 on the following page.
For CLOSEMOUNT-STYLE FAN
MOUNTING, skip to page 12.
8.
ANGLE
MOUNT
STANDARD
MOUNT
DANGER: To reduce the risk of fire,
electrical shock, serious personal injury or
damage to the fan, make sure outlet box
screws DO NOT get installed on or near the
wall that separates the keyhole and the long,
narrow slot on each side of the mounting
bracket (see above).
Mounting bracket
(view from underside)
C
C
A
10
2.
3.
3
A
M
L
Set Screw
and Nut
2
B
DOWNROD-STYLE FAN MOUNTING
Insert downrod (A) through canopy (B), and
yoke cover (E). Thread wires from motor
housing (D) up through downrod (A).
E
Slip downrod (A) into yoke, align holes and
re-install pin (L) and clip (M). Tighten set screws
and then tighten nut. Slide yoke cover (E) down
until it rests on top of motor housing (D).
D
Remove pin (L) and clip (M) from downrod (A).
Partially loosen preassembled set screws and
nut in yoke at top of motor housing (D).
1a.
1b.
E
D
1b
Yoke
Set Screw
& Nut
Sideview
1a
M
L
A
CLOSEMOUNT-STYLE FAN MOUNTING
Remove preassembled canopy cover from
bottom of canopy (B). NOTE: Turn canopy
cover to the left (counterclockwise) to remove
from canopy (B).
NOTE: The downrod (A), yoke cover (E) and
canopy cover are not used in this type of
installation.
1.
Canopy
Cover
1
B
11
5.
Install hanging ball of downrod (A) into opening of
mounting bracket (C). Align one of the slots in
hanging ball with the tab in mounting bracket (C).
DANGER: Failure to align slot in hanging ball
with the tab in mounting bracket (C) may result in
serious injury or death.
Continue to WIRING on page 13.
DOWNROD-STYLE FAN MOUNTING
C
Tab
5
A
Slot
P
D
Depending on the length of downrod you use,
you may need to use the additional lead wiring
(P).
Connect male plug from motor housing (D) to the
end of additional lead wiring (P) with female
plug. Make sure plugs connect tightly.
NOTE: If you do not use additional lead wiring
(P), Step 4 is not necessary and you may
proceed to Step 5 instead.
4.
4
CLOSEMOUNT-STYLE FAN MOUNTING
12
Temporarily hang fan on the tab on the
mounting bracket (C) using one of the
non-slotted holes in the canopy (B).
4.
3.
Remove every other motor screw (H) and
lock washer (I) from top of motor housing
(D).
2.
Pull wires up through hole in the middle of the
canopy (B). Align larger holes in canopy (B)
with 3 screws in top of motor housing (D).
Attach canopy (B) to motor housing (D) using
the three motor screws (H) and lock washers
(I) previously removed.
Tab
C
4
B
Non-Slotted
2
D
H
I
3
B
D
H
I
WIRING
13
2.
Insert each GROUND (GREEN) wire from fan
(on downrod (A), if applicable, and mounting
bracket (C)) and the BARE/GREEN wire from
ceiling into openings in lever wire connector
(CC) with three levers.
Insert BLACK wire from remote control receiver
(N) and BLACK wire from ceiling into openings
in lever wire connector (CC).
Insert WHITE wire from remote control receiver
(N) and WHITE wire from ceiling into openings
in lever wire connector (CC).
Connect plug from remote control receiver (N)
to plug from motor housing (D).
NOTE: BLACK wire is hot power for fan.
WHITE wire is common for fan and light kit.
GREEN or BARE wire is ground.
2
WARNING: To reduce the risk of fire, electrical shock or personal injury, lever wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and one lead wire from the
fan. If your house wire is larger than 12-gauge or there is more than one house wire to connect to the
corresponding fan lead wires, consult an electrician for the proper size lever wire connectors to use.
CAUTION: Be sure outlet box is properly grounded and that a ground (GREEN or BARE) wire is
present.
WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.
WARNING: Using a full range dimmer switch (not included) to control fan speed will cause a loud
humming noise from fan. To reduce the risk of fire or electrical shock, do NOT use a full range dimmer
switch to control fan speed.
1.
IMPORTANT: Each wire connection is made by
firmly raising the levers on each lever wire
connector (CC), as shown. Then, ONE wire is
inserted into each opening.
WARNING: In order for wire connections
to be secure, all levers on the lever wire
connectors (CC) must be completely returned
to their original position as shown on Step 2.
1
CC
N
WHITE SUPPLY WIRE
BLACK SUPPLY WIRE
BLACK
AC IN L
WHITE AC IN N
WHITE
GROUND (GREEN OR BARE)
GROUND
(GREEN OR BARE)
BLACK
FROM
RECEIVER
FROM
FAN
FROM
RECEIVER
FROM
CEILING
B
CC
A
14
3.
Wrap electrical tape (not included) around each
individual wire connector (CC) down to the wire.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections. Place GREEN and WHITE
connections on opposite side of the outlet box
from the BLACK and BLUE (if applicable)
connections.).
WARNING: GENTLY pull on wires in each
lever wire connector (CC) to confirm the lock is
engaged and that wires are secure.
4
Gently slide remote control receiver (N) flat-side
up into mounting bracket (C). Turn spliced/taped
wires upward and gently push wires and lever
wire connectors (CC) into outlet box. Let antenna
from remote control receiver (N) hang to the side.
NOTE: The remote control included with this fan
meets the following requirements:
a. Not for use with solid state fans.
b. Electrical rating: 120V / 60 Hz;
motor amps:1.25 MAX.
Should you choose to use a different remote
control with this fan, it must also meet these same
requirements.
4.
Antenna
A
N
C
WIRING
Lever Wire Connector x 3
Hardware Used
CC
CC
3
CC
CC
FINAL INSTALLATION
15
1.
Temporarily lift canopy (B) to mounting
bracket (C) to determine which two canopy
mounting screws/lock washers (G) in
mounting bracket (C) align with slotted holes
in canopy (B) and partially loosen these two
canopy mounting screws/lock washers (G).
Remove the other two canopy mounting
screws/lock washers (G).
Now, lift canopy (B) to mounting bracket (C)
again, aligning slotted holes in canopy (B)
with loosened canopy mounting screws/lock
washers (G) in mounting bracket (C). Twist
canopy (B) clockwise to lock. Re-insert the
two canopy mounting screws/lock washers
(G) that were just removed and tighten all
canopy mounting screws/lock washers (G)
securely.
1
Downrod
Option
Closemount
Option
B
G
D
G
D
B
2.
Align slots on shade (K) with protrusions on
the inside border of preassembled LED light kit
(F). Turn shade (K) clockwise until it no longer
turns.
NOTE: Pull down gently on the shade (K) to
make sure it is completely secured.
2
Slot
Protrusion
K
F
23A
16
FCC Compliance Notice for Remote Control and LED Light Kit
CAUTION: Changes or modifications not approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
Distributed by: Litex Industries Inc., P.O. Box 535639, Grand Prairie, TX, 75053; 800-527-1292
CAUTION: The remote control transmitter can be programmed to multiple receivers or fans. If this
is not desired, turn wall switch off to any other programmable receiver or fan.
OPERATING INSTRUCTIONS
Locate battery and remote control transmitter in
remote pack (O). Remove protective covering from
each one and discard protective covering. Remove
battery cover from back of remote control transmitter.
Install 12-volt battery (included).
WARNING:Battery is to be inserted with correct
polarity.
Replace battery cover on the back side of the remote
control transmitter.
WARNING: Choking/Ingestion Hazard - Small
parts. Keep battery away from children.
NOTE: Battery is NOT rechargeable. Remove battery
with low or no charge and dispose of properly.
1.
CAUTION: “DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR
LEAK.” - When disposing of household alkaline batteries, it is best to check with your local and state
recycling or household hazardous waste coordinators concerning the specifics of the program in your
area. You may also locate a recycling center by calling 1-800-8-BATTERY or 1-877-2-RECYCLE or visit
www.epa.gov/epawaste/index.htm or www.earth911.org for more information.
(back
side)
1
Battery
Cover
O
Remote
Control
Transmitter
Battery
17
2.
Restore electrical power.
IMPORTANT: To prevent damage to remote control
transmitter, remove the battery if not used for long
periods. Store the remote control transmitter away
from excess heat or humidity.
NOTE: If fan and/or remote control fail(s) to operate
or you have purchased a new remote control
transmitter, make sure to turn the power off first.
Restore electrical power. Within 30 seconds of
restoring electrical power, press and hold the
ON/OFF button (
) on the remote control transmitter
for 5 seconds until light blinks twice. Use the remote
control transmitter to test the light and fan functions to
confirm the learning process is complete.
2
Remote Control Transmitter
OPERATING INSTRUCTIONS
Operation buttons on the panel of the remote control
transmitter:
3 button for fan HIGH speed
2 button for fan MEDIUM speed
1 button for fan LOW speed
0 button to turn fan OFF
button to turn light ON or OFF
Tap button quickly to turn lights off or on. Hold
button down to increase or decrease lights. If you
press button in excess of 0.7 seconds, it
becomes a dimmer. The lights vary cyclically in
8 seconds. The light button has an auto resume
function, which keeps the light at the same
brightness as the last time it was turned off.
3.
3
Remote Control Transmitter
4.
Use the fan reverse switch on the top part of motor
housing (D) to optimize the fan for seasonal
performance. A ceiling fan will allow you to raise
your thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
CAUTION: Turn fan off at wall switch and let
blades (J) come to a complete stop before manually
activating the reverse switch.
4
reverse switch
D
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
18
4a
4b
4c
4c. IMPORTANT: Reverse switch must be
set either completely LEFT or completely
RIGHT for fan to function. If the reverse
switch is set in the middle position, fan will
not operate.
4a. In warmer weather, setting the reverse
switch in the LEFT position will result in
downward airflow creating a wind chill effect.
4b. In cooler weather, setting the reverse
switch in the RIGHT position will result in
upward airflow that can help move stagnant,
hot air off the ceiling area.
At least twice each year, lower canopy (B) to check downrod (A) assembly, and then tighten all screws
on fan. Clean motor housing (D) with only a soft brush or lint-free cloth to avoid scratching the finish.
Clean blades (J) with a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood
blades for added protection.
IMPORTANT: Shut off main power supply before beginning any maintenance. Do not use water or a
damp cloth to clean the ceiling fan.
• Total wattage for the light kit for this fan is 18 watts; do not attempt to replace the LEDs.
19
WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Fan does not move. 1. Reverse switch not engaged.
2. Power is off or fuse is blown.
3. Faulty wire connection.
4. Learning code process between
fan and remote control transmitter
may not have been successful
and learning code was not
activated.
1. Push switch firmly either left or right.
2. Turn power on or check fuse.
3. Turn power off. Loosen canopy and
check all connections.
4. Turn off power and repeat
instructions in Step 2 on page 17.
Noisy operation.
1. Blades are loose.
2. Cracked blade.
3. Full range dimmer switch.
4. Fan is new.
1. Tighten all blade screws.
2. Replace blade.
3. Replace with an approved speed
control device.
4. Allow fan a “break in” period of a few
days, especially when running the
fan at Medium and High speeds.
Excessive wobbling.
1. Blades are loose.
2. Unbalanced blades.
3. Fan not securely mounted.
4. Fan too close to vaulted ceiling.
5. Set screw(s) on motor housing
yoke is (are) not tightened properly.
6. Set screw on hanging ball is not
tightened properly.
1. Tighten all blade screws.
2. Switch one blade with a blade from
the opposite side.
3. Turn power off. Carefully loosen
canopy and verify that mounting
bracket is secure.
4. Use a longer downrod or move fan to
another location.
5. Tighten yoke set screw(s) securely.
6. Carefully loosen and lower canopy
and verify that set screw on hanging
ball is tightened securely.
NOTE: A small amount of "wobble" is normal and should not be considered a defect.
Fan operates but
light fails
1. Wires in canopy not wired properly.
2. Wall switch to fan is off.
1. Check wires in canopy and, if
necessary, re-wire according to
instructions on page 13.
2. Make sure that wall switch to fan is
on.
Remote control fails
to operate.
1. Remote control transmitter not
synced with fan.
2. Battery not installed correctly.
3. Battery no longer working.
1. Refer to instructions in Step 2 on
page 17.
2. Check that battery has been installed
with correct polarity.
3. Replace battery according to
instructions on page 16.
20
Printed in China
GGLI2403
LIMITED LIFETIME WARRANTY
Set forth below, the manufacturer warrants the fan motor for this ceiling fan to be free from defects in
workmanship and material for the life of the product. Also, subject to the limitations below, the
manufacturer warrants all ceiling fan parts (“ceiling fan parts” excludes the motor and parts made in
whole or in part with glass) to be free from defects in workmanship and material for a period of one year
after the date of purchase by the original purchaser at retail.
All claims must be made by the original purchaser, whether such purchaser purchased the product
through a store or contractor. Ceiling fan part defects must be reported within the first year from the date
of purchase. Parts made in whole or in part with glass and the finishes of metal and other surfaces are
not warranted.
Purchasers are responsible for all costs of removing and reinstalling the product. Any damage to any
part caused by ordinary wear and tear, accident, misuse, or improper installation, is not covered by this
warranty. The manufacturer assumes no responsibility whatsoever for fan installation. Any service
performed by a non-licensed electrician will render the warranty invalid.
The manufacturer’s sole responsibility shall be to repair or replace the motor, parts, or product within the
terms stated above. The manufacturer shall not be liable for any loss or damage of any kind, including
any incidental or consequential damages resulting directly or indirectly, from any breach of warranty,
express or implied, or any other failure of this product. Some states do not allow the exclusion or
limitation of incidental or consequential damages so this limitation may not apply to you.
If the original purchaser ceases to own the fan, this warranty is voided.
Should the purchaser encounter a problem with your fan related to defects in workmanship or materials
within the warranty period associated with the defective part, the manufacturer agrees to replace the
defective part without charge, or at its option, to replace the ceiling fan with a comparable or superior
model.
The manufacturer’s warranties are limited to the written warranties set out in this ceiling fan limited
lifetime warranty. All other express and implied warranties, including, without limitation, the implied
warranty of fitness for a particular purpose and the implied warranty of merchantability are disclaimed.
Some states do not allow the disclaimer of implied warranties, so this disclaimer may not apply to you.
J
A Downrod
B Canopy
C Mounting Bracket
J Blade
K Shade
5709395-A
5709395-B
5709395-C
5709395-J
5709395-K
5709397-A
5709397-B
5709397-C
5709397-J
5709397-K
A
B
C
K
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 800-527-1292, 8:30 a.m. - 5 p.m., CST,
Monday - Friday.
#
5709395
#
5709397
PART DESCRIPTION PART# PART#
