1
INSTALLATION MANUAL
FOR 24inch Single Zone Beverage Wine Cooler
MODEL NO.
EBS24BES
Thanks for buying our beverage center, Hope our advanced product will give your
wine a different joyful taste. Before use, please read and follow all safety rules and
operating instructions
2
WARNING
•
This beverage center contains a flammable refrigerant (R600a). Keep away from
open flames, sparks, cigarettes, or other ignition sources. Do not damage the
refrigerant tubing.
• Do not store or use gasoline or other flammable vapors and liquids near this or
any other appliance.
• Do not use electrical devices inside the beverage center unless they are
recommended by the manufacturer.
• Do not use an extension cord, adapter, or power strip. Connect the appliance to a
properly grounded outlet.
• Children should not play with or inside the beverage center. Keep packaging
materials out of the reach of children.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent, or qualified personnel.
• Do not touch the compressor or rear metal components; some surfaces may be
hot.
• Ensure that the power plug remains accessible after installation.
– WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
– WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
– WARNING: Do not damage the refrigerant circuit.
– WARNING: Do not use electrical appliances inside the food storage compartments
of the appliance, unless they are of the type recommended by the manufacturer.
Do not store explosive substances such as aerosol cans with a flammable propellant
in this appliance.
– WARNING: This refrigerating appliance is not suitable for freezing food.
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type
environments;
– bed and breakfast type environments;
3
– catering and similar non-retail applications.
–WARNING: To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.
PLEASE DON’T TRY TO PLUG INTO OR EXTENSION THE CABLE IN ANY
CASE.
4
• Read all instructions before using the beverage center.
DANGER — ELECTRICAL SHOCK HAZARD
• Disconnect the beverage center from the power supply before servicing,
cleaning, or replacing any components.
• Never remove the grounding prong from the plug.
WARNING — RISK OF FIRE / FLAMMABLE REFRIGERANT (R600a)
• This appliance uses a flammable refrigerant. Avoid ignition sources. If a leak
is suspected, disconnect power, ventilate the room, and contact qualified
service personnel.
• Do not damage the sealed system.
WARNING — INSTALLATION AND USE
• This appliance must be properly installed and grounded.
• Do not use an extension cord or multi-plug adapter.
• Do not store explosive materials (such as aerosol cans) inside or near the
beverage center.
• This appliance is intended for indoor household use only.
CAUTION — HANDLING AND OPERATION
• Do not overload shelves and do not block internal air vents.
• Open the door slowly to prevent tipping or shelf movement.
NOTICE — CLEANING AND MAINTENANCE
• Disconnect power before cleaning. Do not use steam cleaners or flammable
cleaning fluids.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock,
or injury when using your appliance,
follow these basic precautions:
5
INSTALLATION INSTRUCTIONS
Before Using Your beverage center
• Remove the exterior and interior packing.
• Before connecting the beverage center to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
• When disposing your appliance, please choose an authorized disposal site.
Installation of Your beverage center
• This appliance is designed to be for freestanding installation or built-in (fully
recessed) (Refer to sticker location the back of this appliance).
• This appliance is intended to be used exclusively for the storage of wine and
beverages.
• Place your beverage center on a floor that is strong enough to support it when it is
fully loaded. To level your beverage center, adjust the front leveling leg at the
bottom of the beverage center.
• This beverage center uses a flammable refrigerant (R600a). Do not damage
refrigerant tubing during transportation or installation. Keep the area free of ignition
sources.
• Avoid locating the unit in moist areas.
• Connect the appliance to a properly grounded 120V~, 60Hz outlet. Do not use an
extension cord, adapter, or power strip. Do not remove or bypass the grounding
prong.
Attention
• Store wine in sealed bottles;
• Do not overload the cabinet;
• Do not open the door unless necessary;
• Do not cover shelves with aluminum foil or any other shelf material which may
prevent air circulation;
• Should the beverage center be stored without use for long periods it is suggested,
after a careful cleaning, to leave the door ajar to allow air to circulate inside the
cabinet in order to avoid possible formations of condensation, mold or odors.
Ambient Room Temperature Limits
This appliance is designed to operate in ambient temperatures specified by its temperature
class marked on the rating plate.
Class
Symbol
Ambient Temperatures range (℉)
Extended Temperate
SN
﹢
50 to
﹢
99
Temperate
N
﹢
61 to
﹢
99
Subtropical
ST
﹢
61 to
﹢
100
Tropical
T
﹢
61 to
﹢
109
6
OPERATING YOUR BEVERAGE CENTER
AND SETTING THE TEMPERATURE CONTROL
OPERATING THE APPLIANCE
EBS24BES
1. Child Lock
When connected to the power, the default setting is unlocked. Press and hold
the button for 3 seconds to lock it. Press again and hold this button for 3
seconds to unlock.
2. Changing the Running Modes
Press to cycle through and select the desired operating mode (STD, ECO or
DEMO).
When the appliance is switched on, the default mode is STD (Standard mode, no
indicator light). The selected mode is shown on the display.
ECO Mode: This is an energy-saving mode where the interior light does not
illuminate, and the display shows "Eco." After closing the door, the display and
buttons will remain active for 5 seconds before turning off.
Demo Mode: This mode is for showroom display only and not for normal
operation. The LED lighting works, but the appliance does not cool. The alarm
symbol activates when the temperature has varied too high or low (HI or LO will
also show in display to confirm this).
Sab Mode: To enter Sabbath mode, press and hold for 3 seconds. The internal
light will be turned off and opening the door will not cause the alarm to sound. ‘Sb’
is displayed and the control panel is locked except for the mode and power button.
Press and hold for 3 seconds to exit Sabbath and return to the standard mode.
3. Changing the LED light color
The LED light and button backlight default setting is Cold color when the appliance
connects to power.
Press the button. The LED light and button backlight alternate three colors: cold.
blue and warm.
4. Changing the LED light mode
Touch this key to cycle through and select the desired light mode. The default
mode is activated on power-on. The modes available are listed below. When
selected, the relevant symbol will illuminate:
Default — Door opening and closing controls the internal lights.
24Hr — After closing the door, the light will remain on for 24 hours.
30Min — After closing the door, the light will remain on for 30 minutes.
1Min — After closing the door, the light will remain on for 1 minute
7
5. Adjusting the LED light brightness.
In 24hr/30min/1min light mode, the brightness of opening the door is 100%, and the
default brightness after closing the door is 50%.
Each time the button is pressed, the brightness will alternate between 50%.
75% and 100%.
6. Power button
Press and hold this button for 3 seconds to turn off the appliance. With a slight
press again to turn it on.
7. temperature setting (up button)
Press this button to increase the temperature by one degree increments. When the
setting reaches the temperature upper limit value 50℉. The set temperature will not
change again.
8. temperature setting (down button)
Press this button to lower the temperature by one degree increments. When the
setting reach the temperature lower limit value 34℉. The set temperature will not
change again.
9. To switch between Celsius or Fahrenheit.
Press and hold and for 3 seconds to switch between ℃ and ℉. The
indicator light will illuminate on the desired temperature setting.
Temperature control range:34-50℉.
The temperature preset at the factory is 43℉.
The product have power off memory function.
Temperature Alarm
If inner temperature is higher than 73℉, The “HI” is shown in display panel, and
the buzzer alarm after one hour continuously. It informs that the inner
temperature is too high, please check the reason.
If inner temperature is too low, the “LO” is shown in display panel, and the alarm
sounded at the same time.
When the set temperature is ≥39℉, the low-temperature alarm triggers at 32℉.
When the set temperature is between 36℉ and 39℉ (36℉ ≤ T <39℉), the low-
temperature alarm triggers at -36℉.
No low-temperature alarm is activated when the set temperature is below 36℉.
Temperature Recollection Function
In the event of a power interruption, beverage center can remember the
previous temperature settings, and when the power is recovery, the cooler
temperature will go back to the same setting temperature as power off.
Door Ajar Alarm Function
If the door is not closed completely the alarm will sound after 1 minute.
Please close the door completely to avoid the loss of cold energy.
8
NOTE
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the
beverage center will not start.
When you use the beverage center for the first time or restart the beverage center after
having been shut off for a long time, there could be a few degrees variance between the
temperature you select, and the one indicated on the LED readout. This is normal and it
is due to the length of the activation time. Once the beverage center is running for a few
hours everything will be back to normal.
WINE CHART
The maximum number of bottles that can be loaded into the cabinet are for information
only. This information is not contractual as it provides a means for rapidly estimating
the size of the device.
Loading proposal#1
Total:116 bottles（Beverage Cans 109 +Bordeaux / Burgundy / Champagne 7 bottles)
Loading proposal#2
Total:96 bottles（Beverage Cans 89 +Bordeaux / Burgundy / Champagne 7 bottles)
Bottle loading proposal#1
Shelf: Wood Shelf(1)+Glass Shelf（2）
Bottle loading proposal#2
The shelf design is the same as
proposal#1
9
Loading proposal#3
Total:101 bottles（Beverage Cans 87 Cans +Bordeaux 14+ Burgundy / Champagne 7 bottles)
Loading proposal#4
Total:80 bottles（Beverage Cans 67 +Bordeaux / Champagne 7 bottles+Burgundy 13 bottles )
Bottle loading proposal#1
Shelf: Wood Shelf(1)+Glass Shelf（2）
Bottle loading proposal#2
The shelf design is the same as
proposal#1
10
ADJUSTABLE SHELVES
• To prevent damaging the door gasket, make sure to have the door fully opened when
pulling shelves out of the rail compartment.
• When removing any of these shelves out of the rail compartment, move the shelf
towards the gap on both sides and alignment with shelf support.
• Then tilt the shelf upwards and pull it out from the cabinet once the shelf support is
disengaged from the gap.
Note: Do not cover shelves with aluminum foil or any other material that will
prevent air circulation within the appliance as this can adversely affect the
internal temperature.
• To prevent damaging the door gasket, make sure to have the door fully opened when
pulling shelves out of the rail compartment.
• For easy access to the storage content, you can pull the shelves approximately 1/3 out
of the rail compartment.
• Do not cover the gaps on the racks with aluminum foil or any other material that will
prevent adequate air circulation within the cabinet.
According to the actual configuration of your product, please check the relative
Remove or Replace Racks.
11
1. Fully extend the shelf you wish to remove.
2. Lift the front of the shelf up.
3. Holding the shelf track, push the shelf in, then up to release from the rear dampers.
REVERSIBILITY OF THE DOOR
Warning: To avoid accidents during the process of changing the door, we recommend that
you get assistance.
The glass door is heavy and may cause injury if dropped.
1. DOOR HINGER BUFFER 2. DOOR HINGE BUFFER SCREW
3. HINGE 4. HINGE SCREW
5. HINGE 6. HINGE SCREW
7. HINGE COVER 8. HINGE COVER
1. Remove the door hinge buffer screw first, and then remove the door hinge buffer
(Standby)（Fig1）
2. Then remove the door hinge cover and right upper and lower hinge（Fig1.2)
3. Rotate the door 180 degrees, install the hinge screw, take the lower hinge cover from
the kit and install it (Fig 3);
4. The install the door hinge buffer (Fig 4)
5. Remove the door light switch spacer from the lower door frame and the decorative
cover from the upper door frame, then swap the positions of these two components 180°
for reinstallation (Fig 5）
12
Standard-Depth Beverage Center
Standard-depth beverage center typically measure 25 to 29 inches in depth,
as opposed to counter-depth beverage center that sit flush with cabinetry.
Installation clearances
√ Ensure adequate ventilation around the beverage
center. Do not block ventilation openings. Install in a
well-ventilated area away from ignition sources.
Proper airflow is required to prevent overheating
and to reduce the risk of fire in appliances using
flammable refrigerant (R600a).
√ The cabinet opening must be at least 24 inches
(61 cm) wide by 35 inches (88.9 cm) high by 25
inches (63.5 cm) deep.
√ If the electrical outlet is located inside adjacent
cabinetry, cut a 1.5 inch (3.8 cm) diameter hole to
admit the power cord. If the cabinet wall is metal,
the hole edge must be covered with a bushing or
grommet.
For optimal usage and ability to open refrigerator
doors completely, do not install next to a wall.
Please note:The above dimensions andcutout
information is for planning purposes only.
Walk the delivery route
√ Identify the narrowest opening that the appliance will travel through, from outside the home to the
location where it will be installed.
√Appliance depth or width must be smaller than the width of the narrowest opening.
Recommended DRINKING temperature
The following (approximate) temperatures are recommended for wine drinking:
o For storing ALL TYPES OF WINES 54 – 57
℉
o Champagne NV, Sparkling 43
℉
o Champagne Vintage 50
℉
o Dry White Semillon, Sauvignon Blanc 46
℉
o Dry White Gewürztraminer, Riesling
50℉
o Dry White Chardonnay 50℉
o Vintage Chardonnay 57
℉
o Sweet White Sauternes Monbazillac, Late Harvest ice wine 50
℉
o Sweet whites vintage Sauternes 57
℉
o Beaujolais 55
℉
o Red Pinot Noir
61℉
o Vintage Pinot Noir red 64
℉
o Red Grenache, Syrah 61
℉
o Red Cabernet, Merlot, French, Australian, New Zealand,
Chilean, Argentinean, Italian, Spanish, Californian
64℉
13
REQUIRED TOOLS
• Safety goggles
• Gloves
• Tape measure
• Carpenter square
• Level
• Flashlight
• Electric drill with hole bit
INSTALLING THE ANTI-TIP BRACKET FOR FREE STANDING
WARNING:
This appliance may tip when shelves are extended, causing damage or injury. If
this appliance is used in a free standing application, the anti- tip bracket must be
installed following these instructions!
Anti-tip bracket parts list:
A: Anti-tip bracket (1pc)
B: Hexagon bolt (1pc) size (6mm x 20mm) (1/4"x4/5")
C: Lock washer (1pc) size (6)
D: Flat washer (1pc) size (6)
E: Screw (2pcs) size (ST4x35)
F: Expansion screw (1 pc) size (6mmX60mm) (1/4"x2.4" )
Secure the bracket with the screws provided.
Anti-tip bracket installation
The bracket can be installed at the
left bottom OR right bottom of the back
of the unit. You can choose which side is
convenient for you.
Anti-tip bracket mounting hole instruction:
Location a: Fixed mounting hole for unit
Location b: Fixed mounting holes for Drywall
Location c: Fixed mounting holes for Wood floor
Location d: Fixed mounting holes for Concrete floor
Location e: Mounting hole on the back unit
IMPORTANT:
Determine the final location of the appliance before attempting to install the bracket.
You will need to choose one of the three installation methods below.
14
DRYWALL installation:
1. After you have chosen the installation
location, place the bracket on the floor
with Loc b against the wall, use Screw (E)
(2pcs) to secure the bracket to the wall.
Ensure at least one screw is secured into
a stud.
2. Move the unit to align Loc e to bracket Loc a,
secure with the bolt (B),lock washer (C)
and flat washer (D).
NOTE: The screws MUST enter into a wood stud. If the wall contains metal studs
or similar materials, then the floor installation must be used
WOOD FLOOR installation:
1. After you have chosen the installation
location, place the bracket on the wood
floor, use: Screw (E) (2pcs) align Loc C
and secure the bracket into wood floor.
2. Move the unit to align Loc e to bracket
Loc a, secure with the bolt(B),lock washer
(C) and flat washer (D).
CONCRETE FLOOR installation:
1. After you have chosen the installation
location, choose any hole of Loc d to
secure the bracket into the concrete floor.
2. Using a concrete bit, drill 8mm (3/8")
pilot hole 45~55mm (1.7"~2") deep3.
Remove the nut, spring washer and
washer of the expansion screw.
4. Carefully tap the expansion screw into
the concrete, using a hammer or mallet.
5. Align Loc d and secure the nut, spring
washer, washer tightly back on the
expansion screw and fix on the concrete floor.
6. Move the unit to align Loc e to bracket Loc a,
secure with the bolt(B),lock washer (C)
and flat washer (D).
ATTENTI ON:
Check the bracket: After installing the bracket, try using light force to tip the unit. If
the unit does not tip then the bracket mounted securely. If the unit does tip, the
bracket MUST be reinstalled following these instructions.
15
CARE AND MAINTENANCE
Cleaning Your Beverage Center
• Turn off the power, unplug the appliance, and remove all items including shelves
and rack.
• Wash the inside surfaces with warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of the controls,
or any electrical parts.
• Wash the outside cooler with warm water and mild liquid detergent. Rinse well
and wipe dry with a clean, soft cloth.
Power Failure
• Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is
opened. If the power is going to be off for a longer period of time, you need to take
the proper steps to protect your contents.
Vacation Time
• Short vacations: Leave the beverage center operating during vacations of less than
three weeks.
• Long vacations: If the appliance will not be used for several months, remove all
items and turn off the appliance. Clean and dry the interior thoroughly. To prevent
odor and mold growth, leave the door open slightly, blocking it open if necessary.
Moving Your Beverage Center
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation.
Also protect outside of appliance with a blanket, or similar item.
Energy Saving Tips
• The beverage center should be located in the coolest area of the room, away from
heat producing appliances, and out of the direct sunlight.
16
PROBLEMS WITH YOUR BEVERAGE CENTER?
You can solve many common beverage center problems easily, saving you the cost of a
possible service call. Try the suggestions below to see if you can solve the problem before
calling the service.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
Beverage center does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Beverage center is not cold enough.
Check the temperature control setting.
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently.
The room temperature is hotter than normal.
A large amount of contents has been added
to the beverage center.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb has burned out.
The light button is “OFF”.
Vibrations.
Check to assure that the beverage center is
level.
The beverage center seems to make too
much noise.
The rattling noise may come from the flow of
the refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in
your beverage center.
Contraction and expansion of the inside
walls may cause popping and crackling
noises.
The beverage center is not level.
17
The door will not close properly.
The beverage center is not level.
The door was reversed and not properly
installed.
The gasket is dirty.
The shelves are out of position.
Before disposal of the appliance.
Before disposal, disconnect the beverage center from the power supply. This
appliance contains a flammable refrigerant (R600a). The refrigerant must be
recovered by authorized personnel in accordance with local regulations. Remove the
door to prevent child entrapment.
18
Element Appliance Limited Warranty
(the “Products” or “Product” when referencing a singular product herein)
This Product (including any accessories included in the original packaging) as
supplied and distributed in new condition, is warranted by Element Appliance
Company, LLC ("Element") to the original customer who purchases the Product
from an authorized Element retailer (the “Original Customer” or “you”) against
defects in material and workmanship under proper use, maintenance, and care
according to the owner’s manual, warnings, and instructions accompanying the
Product (“Warranty”) as follows:
* PLEASE NOTE – Proof of purchase evidencing the date of purchase by the Original
Purchaser from an authorized Element retailer (“Valid Proof of Purchase”) is required for
all Warranty service. The express Warranty set forth herein is subject to all terms and
conditions set forth below.
1.WARRANTY SERVICE:
A.ONE-YEAR WARRANTY: Except as provided in subpart 1.B below, for
a period of one (1) year from the date of purchase by the Original Customer (the
“Warranty Period”), if the parts or components covered by this Warranty are
determined by Element or Element’s authorized service provider to be defective in
material or workmanship, Element will, at its sole and absolute discretion and
option: (i) repair the defective part or component at no charge to the Original
Customer, (ii) replace the defective Product with a new Product of similar or better
quality, at no charge to the Original Customer, or (iii) refund the documented
purchase price paid by the Original Customer (excluding tax) to the Original
Customer upon return of the defective Product as directed by Element. After the
Warranty Period expires, the Original Customer must pay for all parts, components,
shipping and handling, labor, and replacement costs associated with the Product or
any part or component thereof, regardless of any defects in the Product or any part
or component thereof.
B.LIMITED EXTENDED WARRANTY THROUGH PRODUCT REGISTRATION:
If and only if the Original Customer registers the Product at www.elementelectronics.com
within ninety (90) days of the date of purchase by the Original Customer, then the
Warranty Period discussed in subpart 1.A. above shall be extended an additional one (1)
year to a new Warranty Period equaling two (2) years from the date of purchase by the
Original Customer. If the Product is not registered as provided for in this subpart 1.B, then
the standard one-year Warranty Period set forth in subpart 1.A shall apply.
C.TIMING AND PROCEDURE: Before Warranty service can commence,
the Original Customer must contact either (i) the retailer from whom the Original
Customer purchased the Product, or (ii) Element directly, in either case for problem
determination and service procedures. Valid Proof of Purchase evidencing that the
Product is within the Warranty Period MUST be presented by Original Customer in
order to obtain the requested Warranty service. Please have your model and
serial number available, along with your date of purchase of the Product. To remain
eligible for Warranty service, Original Customer may not return the Product or any
part or component thereof to the retailer or Element without Element’s prior written
consent.
2.EXCLUSIONS AND LIMITATIONS TO WARRANTY SERVICE
The Warranty covers manufacturing defects in materials and workmanship of the
Product encountered in the normal, non-commercial use of the Product, and does
not cover (a) damages or malfunctions resulting from improper or unreasonable
19
use or maintenance, abuse, negligence, failure to follow instructions contained in
any written materials that accompany the Product, deterioration by reason of
excess moisture, corrosive atmosphere, lightning, power surges, connections to
improper voltage supply, unauthorized alteration, or other external causes such as
extremes in temperature or humidity, modifications, scratches or discoloration; (b)
any damage caused by using non-authorized parts or service facilities for repair of
Products (however, for avoidance of doubt, using non-authorized parts or service
facilities will not, in and of itself, void the Warranty); (c) transportation, shipping,
delivery, pickup, insurance, installation, or set-up costs; (d) ordinary wear and tear,
cosmetic damage, or damage due to acts of nature, including but not limited to, water,
floods, wind, storm, tornado, earthquake, or fire, or due to damage caused by extraordinary
impact events, such as dropping, crushing, demolition or other extraordinary damage
; (e)
commercial use of the Product, or use of the Product for anything other than single-
family household or residential use; or (f) modification of the Product or any part of
the Product.
This Warranty is made to the Original Customer only and does not cover Products
sold AS IS or WITH ALL FAULTS. The Warranty is invalid if the factory-applied
serial number has been altered or removed from the Product. This Warranty is valid
only in the United States, and only applies to Product if it was purchased and
serviced in the United States. The addition of equipment or features to the Product that
are not manufactured or recommended by Element could affect the intended function of the
Product, and therefore may void the Warranty. Furthermore, the exposure of the Product
to chemicals, heat, cold, humidity, or other elements can affect the Product components,
and therefore, the Warranty does not cover discoloration, fading, cosmetic changes, rust,
or any damages or failure related to any such items. The Warranty is contingent upon the
proper use, maintenance, and care of the Product. The Warranty may be void if the
Product has been used in a manner contradictory to, or in violation of, the terms of the
user’s manual, warnings, or instructions accompanying the Product.
THIS WARRANTY IS MADE IN LIEU OF AND SUPERSEDES ALL OTHER
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR GENERAL USE, WHETHER EXPRESS, IMPLIED,
COLLATERAL, STATUTORY, OR PROVIDED BY COMMON LAW, THE UNIFORM
COMMERCIAL CODE, OR OTHERWISE. ELEMENT FURTHER DISCLAIMS ALL
WARRANTIES AFTER THE END OF THE WARRANTY TERM DEFINED ABOVE. NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY OTHER PERSON,
FIRM, OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON
ELEMENT. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE
PRICE, AT ELEMENT’S SOLE DISCRETION, ARE THE EXCLUSIVE REMEDIES OF
THE CUSTOMER.
ELEMENT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT.
THESE INCLUDE, BUT ARE NOT LIMITED TO, ANY DAMAGES IN THE FORM OF
LOST PROFITS, LOSS OF USE, LEGAL FEES, ECONOMIC LOSS, PERSONAL
INJURIES, OR ANY OTHER DAMAGES CAUSED BY CIRCUMSTANCES BEYOND THE
CONTROL OF ELEMENT. NOTWITHSTANDING THE FOREGOING, ELEMENT’S
AGGREGATE LIABILITY TO ANY CUSTOMER SHALL NOT EXCEED THE ORIGINAL
PURCHASE PRICE OF THE PRODUCT. THIS WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL CUSTOMER WHO PURCHASED THE
PRODUCT, AND IS NOT TRANSFERRABLE. NO PERSON IS AUTHORIZED TO
ALTER, EXTEND, OR WAIVE THIS WARRANTY OR ANY OF ITS TERMS OR
CONDITIONS.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or allow limitations on warranties, so the above limitations or exclusions
may not apply to you. This Warranty gives you specific rights, and you may have
20
other rights, which vary from state to state. The exclusions and limitations to the
Warranty apply to the maximum extent permitted by law and unless restricted or prohibited
by law. Where any term of this Warranty is prohibited by applicable law, it shall be null and
void, but the remainder of this Warranty shall remain in effect.
PLEASE DIRECT ALL CORRESPONDENCE TO:
Element Appliance Company, LLC
(888) 842-3577
https://elementelectronics.com
Element, the Element Logo, and Bring it home are trademarks of Element Brand
Holding, LLC. All other trademarks are the property of their respective owner,
who has not sponsored, endorsed, or approved this product. ©2025 Element
Appliance Company, LLC. All rights reserved.
Distributed by Element Appliance Company, LLC
Augusta, GA 30909
For service, support and warranty information:
Call 888.842.3577, email us at custo[email protected] or visit
www.elementelectronics.com
