Technical Support and E-Warranty Certificate
www.vevor.com/support
GO-KART REVERSE GEAR BOX
MODEL: YMGE-RG-A
We continue to be committed to provide you tools with
competitive price. "Save Half", "Half Price" or any other
similar expressions used by us only represents an
estimate of savings you might benefit from buying certain
tools with us compared to the major top brands and does
not necessarily mean to cover all categories of tools
offered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually
saving half in comparison with the top major brands.
1
MODEL:
YMGE-RG-A
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual
instructions carefully before operating. VEVOR reserves a
clear interpretation of our user manual. The appearance of
the product shall be subject to the product you received.
Please forgive us that we won't inform you again if there are
any technology or software updates on our product.
GO-KART REVERSE
GEAR BOX
2
Warning-To reduce the risk of injury,
user must read instructions manual
carefully.
Part List
Code
Name
Picture
QTY.
1
Reverse
Gear box
1
2
Gear Lever
1
3
Gear Shift
Cables
2
4
12T Sprocket
1
5
Screws
M8*90
3
6
Nuts M8
3
7
Washer
φ15*35*5.5
2
3
High adaptability: This go kart transmission kit is
suitable for # 35 chain 12T or # 40/41/420 chain
10T racing go kart, dune buggies, UTVs and
8
Screws
M6*12
3
9
Screws
M6*16
2
10
Nuts M6
2
11
Nuts M6*1.5
1
12
Plastic
Washer
φ18*35*7.3
1
13
Flat Key
1
14
Steel Sleeve
1
15
Plastic Pipe
1
16
Mounting
Plate
1
17
Connector
1
18
Clamping
Sleeve
1
19
Y-frame
1
4
other off-road vehicles. Perfect fit 2-8
horsepower.
[Simple installation] This go kart reverse gearbox
is simple to install and suitable for people who
like DIY racing. Just follow the operation to
complete the installation and use.
Model
YMGE-RG-A
Recommend engine
2-8 HP
Shaft size
16mm(not 5/8 inch,
can’t fit original
Comet 30 Series
secondary clutch)
Keyway Size
3/16 inch
Reverse ratio
1:2.6
Forward ratio
1:1.3
Introduction to use
5
Address：Baoshanqu Shuangchenglu 803long 11hao
1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA
STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250,
9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support
