I
D
E
AL
Instruction Manual
Model:RZB��/RZB�
Mini-Tank Electric Water Heater
Purpose and characteristics
Random attachments and materials
Technical Parameter
Installation
Kind reminder
Repair and maintenance
Common faults and solutions
Warranty
1
1
2
2
5
7
7
8
Foshan Shunde QINGZHOU Electric Appliances Co.,Ltd
ADD: ROOM 2901,BUILDING 18, VANKE JINYU RIVERSIDE PLAZA,NO.13 DESHENG
MIDDLE ROAD, DALIANG STREETSHUNDE DISTRICTFOSHAN CITY,GUANGDONG
PROVINCE
Random attachments and materials
-
1
www.iamzchef.com Email: [email protected] Whatsapp:+1（838 ）910 8317 Facebook: amzchefappliancewww.iamzchef.com Email: [email protected] Whatsapp:+1（838 ）910 8317 Facebook: amzchefappliance
�.�
�.�
86℉~167℉
270*285*285mm
10.6*11.2*11.2inch
280*350*350mm
11.0*13.8*13.8inch
6 6
2
www.iamzchef.com Email: [email protected] Whatsapp:+1（838 ）910 8317 Facebook: amzchefappliance
30℃~75℃
86℉~167℉
30℃~75℃
1. Water ingress. Firstly, open any outlet faucet at the outlet of the electric water heater, and
adjust themixing valve to high temperature for water output. Position, then open the inlet valve,
at this pointThe innerliner begins to fil with water. When the faucet releases water normally, it
indicates that the inner tank isfilled with water, and the faucet can be turned off at this time. The
inlet valve is located. lt should be in anopen state during normal use.
2.Power on.the power indicator light is on and the color is green.
3. Rotate the temperature adjustment knob to the desired position. At this time, the heating
indicator light ison and the color is red. This indicates that the heating tube in the inner tank is
starting to work. Rotateclockwise to increase the temperature and counterclockwise to decrease it.
4. When the heating water temperature reaches the set temperature, the electric water heater
wilautomatically stop working. At this time, the heating indicator light will go out, and when the
watertemperature drops to a certain temperature,The electric water heater will automatically turn
on the powerand reheat.
5. When heating an electric water heater, when the tap water pressure is greater than 0.7MPa,
the one-waypressure release device will have water droplets or a small amount of water flowing
out. which is a normaphenomenon.At this point, use a regular rubber hose to guide the water to
the appropriate location.
6. By adjusting the mixing valve, you can get hot water that is suitable for your temperature and
enjoy it tothe fullest.
7. When not in use for a long time, please turn off the power and inlet valve of the electric water
heater.
★ Do not test the water with a showerhead on the human body to avoid scalding the skin.
Operation method:
When the system is powered on, the green light will light up and
self check if there is a falult. A beep will sound and the indicator
light will be displayed for 2 seconds. After 2 seconds, the key
indicator light will flash and enter standby mode. When the
system is ppwered on, turn the knob to the "OFF" position, turn on
the water heater switch, and the red light will light up when
heating.
When turning to the "LOW" position, adjust to the low tem
perature state at that ppsition; When turning to the "IDEAL"
position, adjust it to a medium temperature state.When turning to
the "MAX" position, adjust it to a high temperature state.
Panel Description：
3
www.iamzchef.com Email: [email protected] Whatsapp:+1（838 ）910 8317 Facebook: amzchefappliance
Kind reminder
6
6
6
6
5
www.iamzchef.com Email: [email protected] Whatsapp:+1（838 ）910 8317 Facebook: amzchefappliance
/158℉
Unplugged if not
used for a long time
6
www.iamzchef.com Email: [email protected] Whatsapp:+1（838 ）910 8317 Facebook: amzchefappliance
Common faults and solutions
Repair and maintenance
7
www.iamzchef.com Email: [email protected] Whatsapp:+1（838 ）910 8317 Facebook: amzchefappliance
