1
EM-60PM-WH
PERSONAL BLENDER
1
IMPORTANT SAFEGUARDS
1. Read all instructions before use and save for future reference.
2. Before using for the first time, remove and safely discard all packing
materials and promotional labels.
3. The blender is for household use only. Do not use outdoors.
4. Before connecting, check that the voltage power corresponds to the one
shown on the appliance nameplate.
5. Do not let cord hang over edge of table or counter or on hot surface.
6. Do not operate any appliance with a damage cord or plug or after the
appliance malfunction or has been damaged in any manner. Return the
appliance to the nearest authorized service facility for examination, repair or
adjustment.
7. If the supply cord is damagedˈit must be replaced by the manufacture or its
service agent or a similarly quality person in order to avoid a hazard.
8. Close supervision is necessary when any appliance is used by or near
children.
9. Avoid contacting moving parts.
10. Blades are sharp, so handle carefully.
11. Never use hot liquids or run the appliance empty.
12. Only use the accessories provided.
13. The appliance can not be used for blending hard and dry
substance, otherwise the blade could be blunted. But it can be used for
blending ice cube.
14. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
15. To protect against a fire, electric shock or personal injuries, never immerse
the blender, motor unit or power cord in water. Do not allow any moisture to
come into contact with these parts.
16. Be sure blending cover is accurately put in place before operating appliance.
17. Keep hands and utensils out of container while blending to
reduce the risk of severe injury to persons or damage to the blender. A
scraper may be used but must be used only when the blender is not running.
18. To reduce the risk of injury, never place cutter-assembly blades on base
without jar or bowl properly attached.
１
1
２
Additional Bottle 1 Unit
145mm X 145mm X 400mm
(L X W X H)
2. Thecorrect assembly way will be described in detail in below sections.
Before assembling the bottle, be sure the power cord is unplugged from the power
outlet.
For attaching bottle, firstly place the bottle lid into the bottle, ensure the bottle lid is
placed tightly
and
properly with the bottle. And then place the bottle into the motor unit
Note: Make sure all the assembly is placed properly.
BEFORE THE FIRST USE
1. Check that all parts are complete and not damaged. Clean the attachment
according to the section
.”ECNANETNIAM DNA GNINAELC“
eht taht erusne dna erac taerg htiw eldnah ,prahs si edalb ehT :GNINRA
W
appliance is unplugged from outlet before assembling and removing parts.
properly.
Operation of Your Blender
Note：Maximum ingredients volumn is 600ml.
This appliance is provided with an additional portable plastic bottle for your convenient
to enjoy different drinks.
1. Place the motor unit on the flat surface. Make sure the power outlet is unplugged.
2. Place the portable bottle on a flat surface with the open ending facing up. Fill the bottle with
your favorite ingredients. Be sure not to fill ingredients exceed the 600ml mark.
Note: For optimal
performance, place desired ingredients in the bottle according to the
following order: liquids, fresh ingredients, frozen fruit, yogurt and ice cream.
3.Please peel or core the fruit or vegetables and then cut it into small dices; Generally the
size of fruit or vegetable dices is 15×15×15 mm.
Note: Never use boiling liquids or run the appliance empty.
4. Assemble the blade assembly onto the opening end of the bottle by turni
ng it in clockwise.
5. Upend
the assembly of bottle and blad
e assembly, and insert them into the motor unit,
make sure arrow on the motor unit align with the blade assembly, then turn the assembly
in clockwise to lock them.
6. Connect the plug to wall outlet and the appliance will start operating.
1
Note: The appliance can be operated without interruption for a maximum of 1 minute,
after which it should be allowed to cool down for around 3 minutes.
7. When the operation is finished, turn the bottle assembly in anti-clockwise to stop the
operation.
8. Upend the bottle assembly, hand the bottle with one hand, and turn the cup base in
anticlockwise with the other hand to remove it.
9. Then assemble the bottle lid on the bottle. Take the bottle with you throughout the day to
stay hydrated. When you need to drink, you just need to open the spout lid to serve
easily.
Note: After you have consumed your blended beverage, wash out the cup and reuse it
throughout the day for water or other cold liquids.
CLEANING AND MAINTENANCE
-After use, reassemble the bottle and pour a little warm water into it and turn the speed
selector to Pulse position for a few seconds to rem
ove the residual food.
-After stop, remove the bottle from the motor unit and rinse the bottle under running
water.
-Wiping the outer surface of motor unit with a damp cloth, do not use abrasive cleansers. Never
immerse in water or other solution for cleaning.
-Dry all parts and then replace them.
Warning: Do not use abrasive cleansers. Never immers
e in water for cleaning.
Note: The blade is very sharp, handle carefully when clean.
５
1
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working
electrical equipments to an appropriate
waste disposal center.
６
1
