Washer
User manual
WF90F53A**
Untitled-1 1Untitled-1 1 2025-03-24 11:00:042025-03-24 11:00:04
English2
Contents
Safety information 4
What you need to know about the safety instructions 4
Important safety symbols 4
Important safety precautions 5
CALIFORNIA PROPOSITION 65 WARNING 5
Critical installation warnings 6
Installation cautions 7
Critical usage warnings 7
Usage cautions 9
Critical cleaning warnings 12
Regulatory notice 13
FCC Notice 13
IC Notice 14
Open Source Announcement 15
Installation 16
Unpacking your washer 16
What’s included 17
Installation requirements 19
Step-by-step installation 23
Before you start 28
Initial setup 28
Run Calibration (recommended) 28
Laundry guidelines 29
Detergent drawer guidelines 31
Operations 35
LCD panel 35
Operating a cycle 38
Cycle overview 40
Cycle chart 43
Settings 47
Special features 54
SmartThings 55
Untitled-1 2Untitled-1 2 2025-03-24 11:00:042025-03-24 11:00:04
English 3
Maintenance 57
Product Care 57
Drum Clean+ 58
Emergency drain 59
Cleaning 60
Recovery from freezing 64
Care for an extended period of non-use 64
Cleaning the exterior 65
Cleaning the interior 65
Troubleshooting 66
Checkpoints 66
Information codes 71
Specifications 73
Fabric care chart 73
Protecting the environment 74
Declaration of conformity 74
Specification sheet 75
Untitled-1 3Untitled-1 3 2025-03-24 11:00:042025-03-24 11:00:04
SAVE THESE INSTRUCTIONS
English4
Safety information
Congratulations on your new Samsung washer. This manual contains important information on the
installation, use and care of your appliance. Please take some time to read this manual to take full
advantage of your washer’s many benefits and features.
What you need to know about the safety instructions
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the
extensive features and functions of your new appliance. Please store the manual in a safe location close
to the appliance for future reference. Use this appliance only for its intended purpose as described in this
instruction manual.
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution and care when installing,
maintaining and operating your washer.
Because the following operating instructions cover various models, the characteristics of your washer may
differ slightly from those described in this manual and not all warning signs may be applicable. If you have
any questions or concerns, contact your nearest service center or find help and information online at www.
samsung.com.
Important safety symbols
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury, death and/or property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or property damage.
NOTE
Indicates that a risk of personal injury or material damage exists.
These warning signs are here to prevent injury to yourself and others.
Please follow them explicitly.
After reading this manual, store it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate
this appliance, familiarize yourself with its operation and exercise care when using it.
Untitled-1 4Untitled-1 4 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
English 5
Important safety precautions
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using
your appliance, follow basic precautions, including the following:
1. Read all instructions before using the appliance.
2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with
gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that
could ignite or explode.
3. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the
appliance is used near children.
4. Before the appliance is removed from service or discarded, remove the door to the washing or drying
compartment.
5. Do not reach into the appliance if the drum is moving.
6. Do not install or store this appliance where it will be exposed to the weather.
7. Do not tamper with controls.
8. Do not repair or replace any part of the appliance or attempt any servicing unless specifically
recommended in the user-maintenance instructions or in published user repair instructions that you
understand and have the skills to carry out.
9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash
water. These substances give off vapors that could ignite or explode.
10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such
a period, before using a washer or combination washer-dryer, turn on all hot water faucets and let the
water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this time.
CALIFORNIA PROPOSITION 65 WARNING
WARNING
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Untitled-1 5Untitled-1 5 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
Safety information
English6
Critical installation warnings
WARNING
The installation of this appliance must be performed by a qualified technician or service company.
• Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury.
The appliance is heavy, therefore take care when lifting it.
Plug the power cord into a wall socket that meets local electrical specifications. Use the socket for this
appliance only, and do not use an extension cord.
• Sharing a wall socket with other appliances, using a power strip, or extending the power cord may result
in electric shock or fire.
• Ensure that the voltage, frequency, and current supplied to the washer matches those listed in the
product specifications. Failure to do so may result in electric shock or fire. Plug the power plug into the
wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and contact points
using a dry cloth on a regular basis.
• Unplug the power plug and clean it with a dry cloth.
• Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket so that the cord is running towards the floor.
• If you plug the power plug into the socket in the opposite direction, the electric wires within the cable
may be damaged and this may result in electric shock or fire.
Keep all packaging materials out of the reach of children as these may be dangerous.
• If a child places a plastic bag over his or her head, he or she can suffocate.
If the appliance, power plug, or power cord is damaged, contact your nearest service center.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
• This may result in electric shock, fire, an explosion, or problems with the product.
• Never plug the power cord into a socket that is not grounded correctly. Make sure that the socket is in
accord with local and national regulations.
Do not install this appliance near a heater or any flammable material.
Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight or
water (rain drops).
Do not install this appliance in a location exposed to low temperatures.
• Frost may cause the tubes to burst.
Do not install this appliance in a location where gas may leak.
• This may result in electric shock or fire.
Untitled-1 6Untitled-1 6 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
English 7
Do not use an electric transformer to power the washer.
• This may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord, or loose wall socket.
• This may result in electric shock or fire.
Do not pull or bend the power cord excessively.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power
cord between objects, or push the power cord into the space behind the appliance.
• This may result in electric shock or fire.
Do not pull the power cord when unplugging the power plug.
• Unplug the power plug by pulling the plug.
• Failure to do so may result in electric shock or fire.
This appliance should be positioned so that the power plug, the water supply taps, and the drain pipes are
accessible.
Installation cautions
CAUTION
This appliance should be positioned in such a way that the power plug is easily accessible.
• Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a solid, level floor that can support its weight.
• Failure to do so may result in abnormal vibrations, movement, noise, or problems with the product.
Critical usage warnings
WARNING
If the appliance is flooded, turn off the water & power supplies immediately and contact your nearest
service center.
• Do not touch the power plug with wet hands.
• Failure to do so may result in electric shock.
If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug immediately
and contact your nearest service center.
• Failure to do so may result in electric shock or fire.
Untitled-1 7Untitled-1 7 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
Safety information
English8
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the
power plug. Do not touch the appliance or power cord.
• Do not use a ventilating fan.
• A spark may result in an explosion or fire.
Do not let children play in or on the washer. In addition, when disposing of the appliance, remove the
washer door lever.
• Children can suffocate to death if trapped inside the product.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using
it.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol, or other
inflammable or explosive substances in the washer.
• This may result in electric shock, fire, or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/drying/spinning).
• Water flowing out of the washer may result in burns or cause the floor to be slippery. This may result in
injury.
• Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washer while an operation is in progress.
• This may result in injury.
Do not touch the power plug with wet hands.
• This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in progress.
• Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.
Do not let children climb in or onto the appliance.
• This may result in electric shock, burns, or injury.
Do not insert your hand or a metal object under the washer while it is operating.
• This may result in injury.
Do not unplug the appliance by pulling the power cord. Always grip the plug firmly and pull it straight out
of the outlet.
• Damage to the power cord may cause a short-circuit, fire, and/or electric shock.
Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.
• When the appliance needs to be repaired or reinstalled, contact your nearest service center.
• Failure to do so may result in electric shock, fire, problems with the product, or injury.
If the water supply hose comes loose from the faucet and floods the appliance, unplug the power plug.
• Failure to do so may result in electric shock or fire.
Untitled-1 8Untitled-1 8 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
English 9
Unplug the power plug when the appliance is not being used for long periods of time or during a thunder or
lightning storm.
• Failure to do so may result in electric shock or fire.
If any foreign substance enters the appliance, unplug the power plug and contact your nearest Samsung
Customer Service.
• This may result in electric shock or fire.
Do not let children (or pets) play in or on your washer. The washer door does not open easily from the inside
and children may be seriously injured if trapped inside.
Usage cautions
CAUTION
If the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the
power plug and clean the washer using a damp, soft cloth.
• Failure to do so may result in discoloration, deformation, damage, or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
• If the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the faucet slowly.
Open the faucet slowly after a long period of non-use.
• The air pressure in the water supply hose or the water pipe may damage a product part or result in a
water leak.
If a draining error occurs during an operation, check if there is a draining problem.
• If the washer is used when it is flooded because of a draining problem, it may result in electric shock or
fire.
Insert the laundry into the washer completely so that the laundry does not get caught in the door.
• If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in a
water leak.
Turn the water supply off when the washer is not being used.
• Ensure that the water supply hose connectors are properly tightened.
Ensure that the rubber seal and front door glass are not contaminated by a foreign substance (e.g. waste,
thread, hair, etc.).
• If a foreign substance is caught in the door or the door is not completely closed, it may cause a water
leak.
Untitled-1 9Untitled-1 9 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
Safety information
English10
Open the faucet and check if the water supply hose connectors are firmly tightened and that there are no
water leaks before using the product.
• If the connectors on the water supply hoses are loose, it may result in a water leak.
The product you have purchased is designed for domestic use only.
Using the product for business purposes qualifies as a product misuse. If the product is used for business
purposes, it will not be covered by the standard warranty provided by Samsung and no responsibility can
be attributed to Samsung for malfunctions or damages resulting from such misuse.
Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes,
chemicals, metal objects, etc.) on the appliance.
• This may result in electric shock, fire, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
• As well as being harmful to humans, this may result in electric shock, fire, or problems with the product.
Do not place objects that generate electromagnetic fields near the washer.
• This may result in injury due to a malfunction.
Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water.
• This may result in burns or injury.
Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a special cycle
for washing these items.
(*): Woolen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and
bicycle, motor cycle and car covers, etc.
• Do not wash thick or hard mats even if the washer mark is on the care label. This may result in injury or
damage to the washer, walls, floor, or clothing due to abnormal vibrations.
• Do not wash throw rugs or doormats with rubber backing. The rubber backing may come off and stick to
inside the drum, and this may result in malfunction such as a drainage error.
Do not operate the washer when the detergent drawer is removed.
• This may result in electric shock or injury due to a water leak.
Do not touch the insides of the drum during or just after drying as it is hot.
• This may result in burns.
The door glass becomes hot during washing and drying. Therefore, do not touch the door glass.
Also, do not allow children to play around the washer or touch the door glass.
• This may result in burns.
Do not insert your hand into the detergent drawer.
• This may result in injury as your hand may be caught by the detergent input device.
Untitled-1 10Untitled-1 10 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
English 11
• Do not use the liquid detergent container (on applicable models only) for powdered detergent. Remove
the container and put powdered detergent directly into the Main wash compartment.
Do not place any objects (such as shoes, food waste, animals) other than laundry into the washer.
• This may result in damage to the washer, or injury and death in the case of pets, due to the abnormal
vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
• This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams, or lotions usually found in skincare shops or massage
clinics.
• This may cause the rubber seal to become deformed and result in a water leak.
Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long periods of time.
• Doing either may cause the drum to rust.
• If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to the surface and
use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry
cleaning detergent.
• This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil.
Do not use water from water cooling/heating devices.
• This may result in problems with the washer.
Do not use natural hand-washing soap for the washer.
• If it hardens and accumulates inside the washer, it may result in problems with the product,
discoloration, rust, or bad odors.
Place socks and brassieres in a washing net and wash them with the other laundry.
Do not wash large laundry items such as bedding in the washing net.
• Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
• If it accumulates inside the washer, it may result in a water leak.
Make sure that the pockets of all the clothing items to be washed are empty.
• Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive damage to
the appliance.
Do not wash clothing with large buckles, buttons, or other heavy metal objects in the washer.
Sort the laundry by color on the basis of its colorfastness and select the recommended cycle, water
temperature, and additional functions.
• Failure to do this may result in discoloration or fabric damage.
Untitled-1 11Untitled-1 11 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
Safety information
English12
Take care that children’s fingers are not caught in the door when you close it.
• Failure to do so may result in injury.
Critical cleaning warnings
WARNING
Do not clean the appliance by spraying water directly onto it.
Do not use a strong acidic cleaning agent.
Do not use benzene, thinner, or alcohol to clean the appliance.
• This may result in discoloration, deformation, damage, electric shock, or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
• Failure to do so may result in electric shock or fire.
Untitled-1 12Untitled-1 12 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
English 13
Regulatory notice
FCC Notice
CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received including interference that cause undesired
operation.
For products sold in the US and Canadian markets, only channels 1–11 are available. You cannot select any
other channels.
FCC STATEMENT:
This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorienting or relocating the receiving antenna
• Increasing the separation between the equipment and receiver
• Connecting the equipment to an outlet that is on a different circuit than the radio or TV.
• Consulting the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator
and your body. This device and its antenna(s) must not be colocated or operated in conjunction with any
other antenna or transmitter.
Untitled-1 13Untitled-1 13 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
Regulatory notice
English14
IC Notice
The term "IC" before the radio certification number only signifies that Industry Canada technical
specifications were met. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of
the device.
This Class B digital apparatus complies with Canadian ICES-003 .
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
For products sold in the US and Canadian markets, only channels 1–11 are available. You cannot select any
other channels.
IC RADIATION EXPOSURE STATEMENT:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated so there is at least 8 inches (20 cm)
between the radiator and your body. This device and its antenna(s) must not be colocated or operated in
conjunction with any other antenna or transmitter.
Untitled-1 14Untitled-1 14 2025-03-24 11:00:052025-03-24 11:00:05
SAVE THESE INSTRUCTIONS
English 15
Open Source Announcement
The software included in this product contains open source software. You may obtain the complete
corresponding source code for a period of three years after the last shipment of this product by contacting
our support team via http://opensource.samsung.com (Please use the "Inquiry" menu.)
It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-
ROM; a minimal charge will be required.
The following URL http://opensource.samsung.com/opensource/SMART_AT_051/seq/0 leads to the
open source license information as related to this product. This offer is valid to anyone in receipt of this
information.
NOTE
Hereby, Samsung Electronics, declares that the radio equipment type appliance is in compliance with
Directive 2014/53/EU . The full text of the EU declaration of conformity is available at the following internet
address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support >
Search Product Support and enter the model name.
Wi-Fi max transmitter power : 20 dBm at 2.412 GHz – 2.472 GHz
Untitled-1 15Untitled-1 15 2025-03-24 11:00:062025-03-24 11:00:06
English16
Installation
Follow these instructions carefully to ensure proper installation of the washer and to prevent accidents
when doing laundry.
WARNING
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control
board, heat sink, motor, inlet valve and pump.
Unpacking your washer
Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown
on the next page. If your washer was damaged during shipping, or you do not have all of the items, call
1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or strain, wear protective gloves whenever
lifting or carrying the unit.
WARNING — Packing materials can be dangerous to children; Keep all packing material (plastic bags,
polystyrene, etc.) well out of children’s reach.
CAUTION
You must have at least 2 people unpack the washer. To
remove the bottom cushion of the packing materials, do
not tip the washer over on its front side. When removing
the bottom cushion, be sure the shipping bolts are
attached to the product. Otherwise, the leveling feet
may detach, causing vibration and noise. When you lay
the washer down to remove the carton base, protect the
side of the washer and lay it down carefully. Never lay
your washer on its back or front.
CAUTION
Do not grab or pull the drain hose to drag and move the
product.
Untitled-1 16Untitled-1 16 2025-03-24 11:00:062025-03-24 11:00:06
English 17
What’s included
Make sure all the parts are included in the product package. If you have a problem with the washer or the
parts, contact a local Samsung customer center or the retailer.
NOTE
The appearance of the actual product may differ from the image shown.
07
08
10
03
04
06
05
11
12
09
02
01
01 Release lever 02 Detergent drawer (Auto
dispenser)
03 Drum
04 Door 05 Worktop 06 Multi-control panel
07 Power plug 08 Drain hose 09 Filter cover
10 Levelling feet 11 Drain filter 12 Emergency drain tube
Untitled-1 17Untitled-1 17 2025-03-24 11:00:062025-03-24 11:00:06
Installation
English18
Parts supplied
Wrench Bolt caps Hose guide Cable tie Anti-slip pads
Parts not supplied
Water hoses (sold separately)
Tools needed for installation
Phillips screwdriver Level Adjustable pliers Measuring tape
NOTE
• Bolt caps: The number (3 to 6) of bolt caps provided depends on the model.
• The appearance of the washer and provided accessories may differ with the model.
• To purchase an accessory or lost part, contact a local Samsung service center or the retailer.
CAUTION
• Do not reuse old water hoses, which may leak or burst, causing flooding and/or property damage.
• Make sure rubber washers are inserted in each coupling of both water hoses.
Untitled-1 18Untitled-1 18 2025-03-24 11:00:072025-03-24 11:00:07
English 19
Installation requirements
Electrical supply and grounding
• AC 120 V / 60 Hz / 15 AMP fuse or circuit breaker is required.
• Use an individual branch circuit. Connect only the washer to the circuit.
To ensure proper grounding, the washer comes with a power cord featuring a three-prong grounding plug
for use in a properly installed and grounded outlet.
Check with a qualified electrician or service person if you are not sure about the grounding.
Do not modify the provided plug. If it does not fit the outlet, call a qualified electrician to install a proper
outlet.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes with the washer.
• Do NOT connect the ground wire to plastic plumbing, gas lines, or hot water pipes.
• Improperly connected grounding conductors may cause electric shock.
• To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be
done in accordance with local codes, or in the absence of local codes, in accordance with the National
Electrical Code, ANSI/NFPA No. 70-Latest Revision (for the U.S.) or the Canadian Electrical Code CSA
C22.1 – Latest Revisions and local codes and ordinances. It is your responsibility to provide adequate
electrical service for your washer.
Water supply
Proper water pressure for this washer is between 20-116 psi (137-800 kPa). Water pressure less than 20 psi
(137 kPa) may cause the water valve not to close completely. Or, it may take longer to fill the drum, causing
the washer to turn off. Water taps must be within 4 ft. (122 cm) from the rear of the washer so that the inlet
hoses reach the washer.
To reduce the risk of leaks:
• Make sure water taps are easily accessible.
• Turn off the taps when the washer is not in use.
• Check for any leaks at the water inlet hose fittings on a regular basis.
CAUTION
Before using the washer for the first time, check all connections at the water valve and taps for any leaks.
Untitled-1 19Untitled-1 19 2025-03-24 11:00:082025-03-24 11:00:08
Installation
English20
Drain
Samsung recommends a standpipe 18 in. (460 mm) high. The drain hose must be connected through the
hose clip to the standpipe, and the standpipe must fully cover the drain hose.
Flooring
For best performance, the washer must be installed on a solid floor. Wood floors may need to be reinforced
to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not provide good
resistance to vibrations and may cause the washer to move slightly during the spin cycle.
CAUTION
Do NOT install the washer on a platform or a poorly supported structure.
Water temperature
Do not install the washer in areas where water may freeze as the washer always retains some water in
its water valves, pumps, and/or hoses. Frozen water can cause damage to belts, the pump, and other
components of the washer.
Dimensions
A. Overall height 38.8 in. (984 mm)
B. Width 27 in. (686 mm)
C. Depth with door open 56.3 in. (1430 mm)
D. Depth 34.5 in. (875 mm)
Untitled-1 20Untitled-1 20 2025-03-24 11:00:082025-03-24 11:00:08
English 21
Clearance requirement
This clearance requirement is applicable for washers only.
NOTE
• For dryer’s clearance requirement, see the dryer’s user manual.
• If the washer and dryer have different clearance requirements, use the one with the larger value.
Alcove or closet installations
Minimum clearance for stable operation:
Sides Top Rear Front
1 in. (25 mm) 1 in. (25 mm) 2 in. (50 mm) 1 in. (25 mm)
If both the washer and a dryer are installed in the same location, the front of the alcove or closet must have
two unobstructed air openings for a combined minimum total area of 72 in.
2
(465 cm
2
).
Undercounter installation
B
C
A
A 39.6 in. (1006 mm)
B 1 in. (25 mm)
C 1 in. (25 mm)
Pedestal installation
A 2 in. (50 mm)
B 6 in. (152 mm)
C 52.8 in. (1341 mm)
Untitled-1 21Untitled-1 21 2025-03-24 11:00:082025-03-24 11:00:08
Installation
English22
This clearance requirement is applicable for washer and dryer pair installation.
Side by side installation
A 1 in. (25 mm)
B
2 in. (50 mm)
* This clearance requirement only
applies to the washer. For dryer's
clearance requirement, see the
dryer's user manual.
C
WF53BB89**A* : 2 in. (50 mm)
WF46BG65**A* : 5.1 in. (129mm)
D 6 in. (152 mm)
E
WF53BB89**A* : 77.6 in. (1971 mm)
WF46BG65**A* : 78.5 in. (1994 mm)
NOTE
If you install a new dryer next to the washer you have
been using, the dryer may stick out at front more than
the washer.
Stacked installation
WARNING
• Samsung’s washers and dryers can be stacked to
maximize usable space.
• The dryer feet need to be removed to stack the
washer and dryer. You can purchase an optional
stacking kit from your Samsung retailer.
- WF46BG65**A* models: SKK-8MC
- WF53BB89**A* models: SKK-9MC*
Untitled-1 22Untitled-1 22 2025-03-24 11:00:092025-03-24 11:00:09
English 23
Step-by-step installation
STEP 1 Select a location
Location requirements:
• A solid, level surface without carpeting or flooring that may obstruct ventilation
• No direct sunlight
• Adequate room for ventilation and wiring
• Ambient temperature always higher than the freezing point (32 °F / 0 °C)
• Away from heat sources
STEP 2 Remove the shipping bolts
1. After unpack the product and remove all shipping
bolts.
NOTE
Use the enclosed end of the supplied wrench to remove
the shipping bolts.
2. Fill the holes with the supplied plastic bolt caps.
Keep the shipping bolts for future use.
WARNING
• The shipping bolts secure the tub during product transportation and reduce the chance of suspension
damage. Remove the shipping bolts before using the product and only reinsert them if you need to
move the product.
• Packaging materials can be dangerous to children. Dispose all packaging material (plastic bags,
polystyrene, etc.) out of children’s reach.
Untitled-1 23Untitled-1 23 2025-03-24 11:00:092025-03-24 11:00:09
Installation
English24
STEP 3 Adjust the leveling feet
1. Gently slide the washer into position. Excessive force
may damage the leveling feet.
2. Using a wrench, turn the leveling feet clockwise
or counterclockwise to adjust the height until the
washer is level.
3. Using a flathead screwdriver, tighten the locking
nuts (A).
NOTE
Use the open-end of the supplied wrench to adjust the
leveling feet.
STEP 4 Connect the water hose
B
A
CAUTION
• Make sure to use new water hoses and that rubber
gaskets (B) are inside the couplings (A) at both ends
of the hoses. Water hoses without the gaskets may
leak.
• Allow 5 in. (127 mm) of space between the back of
the washer and the wall to prevent water hoses from
being kinked. Kinked hoses may cause water leaks.
• If there is a water leak, stop using the washer and
contact a local Samsung service center. A water leak
may cause electric shock.
• Do not stretch the water hoses by force. If a hose is
too short, replace the hose with a longer hose.
Untitled-1 24Untitled-1 24 2025-03-24 11:00:092025-03-24 11:00:09
English 25
1. Attach the water hoses to the hot and cold water
taps, and then hand tighten the water hose fittings
until they are tight. Then, use pliers to tighten the
fittings by an additional two-thirds of a turn. To avoid
damaging the fittings, do not overtighten them.
2. Pull the water hoses to check if they are firmly
connected.
3. Put the other ends of the hoses into a bucket, and
then open the water taps for 10 - 15 seconds to
remove impurities. When done, close the taps.
4. Attach the water hoses to the hot and cold water
inlets on the back of the washer, and then hand
tighten the water hose fittings until they are
tight. Then, use pliers to tighten the fittings by an
additional two-thirds of a turn.
NOTE
If you do not want to use the hot water supply hose,
attach the water intake cap to the hot water supply
intake. When you do a wash, press Temp. to select Cold.
Untitled-1 25Untitled-1 25 2025-03-24 11:00:102025-03-24 11:00:10
Installation
English26
5. Open the water taps, and check for leaks.
STEP 5 Connect the drain hose
To a Laundry Tub or Drain Pipe
1. Check the height (A) of your drain system and make
sure the minimum and maximum heights shown
below are met.
Minimum 18 in. (46 cm)
Maximum 96 in. (245 cm)
NOTE
• Make sure to measure the height from the floor
where the washer is placed.
• Draining efficiency may be reduced if the drain
system is at the maximum height.
• To prevent the washer from siphoning water, do not
use a drain system below the minimum height.
9
2. Attach the drain hose to the plastic hose guide (B).
Untitled-1 26Untitled-1 26 2025-03-24 11:00:102025-03-24 11:00:10
English 27
*
A
(*): Min. 6 in. (152 mm), Max. 8 in. (203 mm)
3. Route the drain hose to the drain system.
CAUTION
• If using a standpipe, make sure the standpipe and
drain hose connection is not airtight.
• If using a standpipe, make sure the drain hose is
inserted at least 6 in. (152 mm) but no more than 8 in.
(203 mm) into the standpipe.
4. Secure the drain hose with cable ties.
AA
Over the edge of a wash basin
The drain hose must be placed no lower than 24 in. (60
cm) and no higher than 35 in. (90 cm) from the floor. To
keep the spout of the drain hose bent, use the supplied
plastic hose guide (A). Secure the guide to the wall using
a hook to ensure stable drainage.
STEP 6 Remove the film inside the door
B
Remove the small circle of film (B) above the door latch
before use.
STEP 7 Power on
Plug the power cord into an AC 120 V / 60 Hz / 15 AMP approved electrical outlet protected by a fuse or
circuit breaker. Then, press Power to turn on the washer.
Untitled-1 27Untitled-1 27 2025-03-24 11:00:112025-03-24 11:00:11
English28
Before you start
Initial setup
• When you turn on the washer for the first time, the screen shows the initial setup process. Follow the
on-screen instructions to complete it.
• Once you select a language, the language selection screen will not reappear. However, you must
complete a wash cycle once to stop the tutorial screen from reappearing.
- You can change the language settings by swiping down from the top of the home screen to access
the Quick Panel , then tapping > General > Language .
• The initial setup includes language selection and a brief tutorial.
• Tap OK to skip to the next screen.
NOTE
You can adjust the desired settings by selecting > General from the Quick Panel or reset the product to
try running the initial setup process by selecting > General > Reset > Reset all settings .
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washer. Make sure the drum is empty before running
calibration.
1. Tap to turn the power on.
2. Swipe down to enter the Quick Panel .
3. Tap > Washer > Calibration .
4. Tap Start Calibration to start the calibration.
Untitled-1 28Untitled-1 28 2025-03-24 11:00:112025-03-24 11:00:11
English 29
Laundry guidelines
STEP 1 Sort
Sort the laundry according to these criteria:
• Care Label: Sort the laundry into cottons, mixed fibers, synthetics, silks, wools, and rayon.
• Color: Separate whites from colors.
• Size: Mixing different sized items together in the drum improves the washing performance.
• Sensitivity: Wash delicate items separately. For pure, new woolen items, curtains, and silk items, check
the labels on the items.
NOTE
Make sure to check the care label on all clothing, and sort clothing accordingly before starting the wash.
STEP 2 Empty pockets
Empty all the pockets of your laundry items
• Metal objects such as coins, pins, and buckles on clothing may damage other laundry items as well as
the drum.
Turn clothing with buttons and embroideries inside out
• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers should be closed
and fixed with a string.
• Clothing with long strings may become entangled with other clothes. Make sure to tie the strings
before starting the wash.
STEP 3 Use a laundry net
• Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres may break
through and tear other laundry items.
• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become caught around
the door. Place them inside a fine laundry net.
• Do not wash the laundry net by itself without other laundry. This may cause abnormal vibrations that
could move the washer and result in injury.
Untitled-1 29Untitled-1 29 2025-03-24 11:00:112025-03-24 11:00:11
Before you start
English30
STEP 4 Determine the load capacity
Do not overload the washer. Overloading may cause the washer to wash improperly.
NOTE
When washing bedding or bedding covers, the wash time may be lengthened or the spin efficiency may be
reduced.
For bedding or bedding covers, the recommended maximum spin level is Level 2 or Level 3, and the load
capacity is 7 lb (3.0 kg) or less.
CAUTION
If the laundry is unbalanced and the " Unbalanced load detected " information code is displayed,
redistribute the load. Unbalanced laundry may reduce spinning performance.
STEP 5 Add the correct detergent type
The type of detergent you use - general purpose, specifically for woolens, etc. - depends on the type of
fabric (cotton, synthetic, delicate items, wool), color, wash temperature, and degree of soiling. Regardless
of the specific type of detergent you use, always use "low suds" HE laundry detergent which is designed for
automatic washers.
NOTE
• Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the degree
of soiling, and the hardness of the water in your local area. If you are not sure about the water hardness,
contact your local water authority.
• Do not use detergent that tends to harden or solidify. This detergent may remain after the rinse cycle,
blocking the drain outlet.
CAUTION
When washing wool using the Wool cycle, use only a neutral liquid detergent. Powdered detergent used
with the Wool cycle can remain on the laundry and discolor it.
Use HE detergent only
For the best cleaning results, use a high efficiency detergent such as Tide
HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds
suppressors that reduce or eliminate suds. When fewer suds are produced, the
load tumbles more efficiently and cleaning is maximized. (* Brand names are
trademarks of their respective manufacturers.)
WARNING
For best results, use HE detergents only. Do not use non-HE detergent, organic
detergent, natural detergent or HE detergents with natural ingredients (such as
vinegar, baking soda).
Untitled-1 30Untitled-1 30 2025-03-24 11:00:112025-03-24 11:00:11
English 31
Detergent drawer guidelines
NOTE
• Automatic dispensers make laundry easier by dispensing the preset amount of washing agents without
you having to pour it in every time, and it could be more economical because the exact amount will be
dispensed each time of use, allowing less waste of washing agents.
• Grab the detergent drawer handle firmly with your hand and pull to open it. It may be hard to open the
detergent drawer with just your fingertips.
D
C
AB
Auto
Dispenser
Manual
Bleach
Manual
Detergent
Fl
e
x
Au
to
Dispe
nser
M
ak
e s
ur
e you
cl
ean
a d
i
sp
en
ser
r
egu
l
ar
l
y
.
On
l
y
u
se
l
iq
u
id
in
the
a
uto di
s
pen
ser.
NOTE
Aut
o
Dis
pens
er
Manu
a
l
B
l
e
ach
M
anual
Det
ergen
t
A. Dispenser 1
- You can use the general detergent in this
compartment.
- Use liquid detergent only. Do not put powdered
detergent or softener.
B. Dispenser 2
- You can set this dispenser to dispense detergent
( General or Specialty ) or softener.
- Use only neutral detergent in this dispenser if you
have set the Detergent type to Specialty .
- Do not put powdered detergent.
C. Manual detergent compartment
- To use the Manual detergent dispenser, set the
Amount option for Dispenser 1 and Dispenser 2
to Off .
- Insert the liquid detergent guide into the
dispenser to use the liquid detergent. Do not put
powdered detergent or softener.
- Remove the liquid detergent guide from the
dispenser to use powdered detergent. Do not put
liquid detergent or softener.
D. Manual bleach compartment
- Add liquid chlorine bleach. Do not exceed the max
line.
Untitled-1 31Untitled-1 31 2025-03-24 11:00:112025-03-24 11:00:11
Before you start
English32
CAUTION
• Do not operate the washer without the dispensers in the detergent drawer.
- A water leak may cause electric shock or injury.
• Do not use the following types of detergent in the drawer.
- Tablet, capsule, ball, or net types.
• Do not use gel-type or viscous detergent/softener in the detergent drawer as they may not flow well.
- Read the detergent/softener manufacturer's instructions before using them in the washer.
• Do not carry around the dispenser removed from the detergent drawer. Put the dispenser back in place.
- Otherwise, the dispenser may shake and cause the content to spill out.
• Empty the dispensers in the detergent drawer before moving the washer to prevent any content from
spilling out on the floor.
NOTE
• If the message " Needs refill " appears on the display, refill the corresponding dispenser.
• The detergent/softener is not automatically dispensed in the Outdoor , Wool , Delicates , and Activewear
cycles if the Detergent type for Dispenser 1 and Dispenser 2 are set to General . You must put the
detergent/softener manually in the manual detergent compartment when using those cycles.
- However, If the Detergent type for Dispenser 2 is set to Specialty , the detergent will be dispensed
automatically.
• Do not exceed the max line when filling detergent and softener.
• It may be hard to open the detergent drawer with just your fingertips. Grab the detergent drawer handle
firmly with your hand and pull to open it.
• Push the detergent drawer all the way to the end to close it. You will hear a click sound when the drawer
is properly closed.
• If you feel the softener scent is weak, set the softener input amount to a higher level.
Untitled-1 32Untitled-1 32 2025-03-24 11:00:112025-03-24 11:00:11
English 33
To apply washing agents to the auto dispenser
NOTE
• Once you refill the auto detergent/softener dispensers, the washer will start to detect the detergent/
softener amount when you tap .
- The detection time may vary depending on the type of the detergent/softener.
Flex Auto
D
i
spense
r
M
a
ke
sure
y
ou
cl
ean
a
d
is
p
ens
er
reg
ularly.
Onl
y
use
li
q
uid i
n
the au
t
o
d
i
sp
ens
er
.
NOTE
Au
to
Dispe
nser
Manual
Blea
c
h
Manual
Detergent
A
1. Pull the detergent drawer to open.
2. Turn the Dispenser 1 cap (A) counterclockwise to
open.
Flex
Aut
o
Dispen
ser
M
a
ke
su
re
y
ou
c
l
ean
a
d
isp
e
n
se
r
r
e
g
u
la
rly
.
O
n
ly use
li
qui
d
i
n
th
e
a
ut
o
d
i
spe
n
se
r
.
N
O
T
E
Auto
Dispenser
Manu
al
Bleac
h
M
a
nual
Det
ergen
t
B
3. Apply an appropriate amount of detergent to the
Dispenser 1.
- After you finish, put the cap back and turn it
clockwise to close.
Flex Auto
Dispenser
Ma
k
e
sure
you
c
lea
n
a
d
ispe
nser
r
egu
l
a
r
ly.
On
l
y
us
e l
iq
ui
d
i
n
the au
t
o d
is
pen
ser.
N
OTE
Auto
Dispenser
Manual
Bleach
Manual
Det
er
gent
C
4. Turn the Dispenser 2 cap (C) anticlockwise to open.
Untitled-1 33Untitled-1 33 2025-03-24 11:00:122025-03-24 11:00:12
Before you start
English34
Flex Auto
D
ispenser
Ma
k
e
sure
you
c
lea
n
a
d
ispe
nser
regula
r
ly.
On
l
y
use
l
iq
ui
d
i
n
t
he au
to
dis
pen
s
er.
NOTE
Auto
Dispenser
Manual
Bleach
Manual
Det
ergent
D
5. Apply an appropriate amount of softener to the
Dispenser 2.
- After you finish, put the cap back and turn it
clockwise to close.
6. Push the detergent drawer to close.
- Push the detergent drawer all the way to the end.
You will hear a click sound when the drawer is
properly closed.
CAUTION
• Do not apply detergent/softener to the drawer without the dispensers.
- If you do, clean the drawer and then reinsert both dispensers.
• Only use liquid detergent or softener in the auto dispenser. Do not use powdered detergent.
• Make sure both dispensers are inserted completely.
- If they are not, the washer may not start operating or fail to dispense washing agents.
• Clean the dispenser before refilling it with the same or a different type of detergent or softener.
• Do not leave detergent or softener in the auto dispenser for more than 6 weeks.
• Do not mix detergent with fabric softener in either dispenser.
• To prevent detergent or softener from hardening, leave the cap closed after filling the dispenser.
• Do not use any bleach that may cause corrosion and/or generate the gas.
• Do not turn any dispenser upside down.
- The content may spill.
• Do not press the outlet at the rear of either dispenser while moving it.
- The content may leak.
• Use caution when putting detergent or fabric softener in the applicable dispenser.
- The content may spill.
• When removing the dispensers to check the remaining content (upon an alert message or before the
message appears), the drawer may have content remaining or leaking from the bottom of the drawer.
• Make sure all the dispensers and compartments in the detergent drawer are empty before moving the
washer.
• The input or refill level of the detergent/softener depends on the type or the remaining amount of
detergent/softener.
• Applying detergent directly to the laundry cause discoloration. Apply detergent in the dispenser.
• Do not use hardened detergent/softener.
NOTE
• Moisture on the manual detergent compartment causes the powered detergent to stick. Therefore,
wipe the moisture with dry cloth before adding the powdered detergent.
• Use detergent and bleach for washing machine only.
• Do not use gel-type or viscous detergent/softener in the detergent drawer as they may not flow well.
- Read the detergent/softener manufacturer's instructions before using them in the washer.
Untitled-1 34Untitled-1 34 2025-03-24 11:00:122025-03-24 11:00:12
English 35
Operations
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the before operating this washer.
LCD panel
NOTE
You can control the dryer from the washer’s LCD panel if it is connected to the washer. Please see the dryer
manual for detailed instructions on using the dryer.
02
0403
01
05
01 Power
Tap to turn the washer on or off.
02 Display
The display shows current cycle information and estimated time remaining, or
an information message when a problem occurs.
03 App dock handler
Drag the App dock handler upward to open the App dock.
• The App dock handler only appears on the Home screen.
04 App tray button
Tap to view all available apps.
• App drawer: Tap App tray to open App drawer. You can open the App drawer
to quickly open the SmartThings , Timer , Bixby , Weather , Ring , Internet , or
Settings app.
05 App dock
App dock displays the icons to allow easier access to the frequently used apps.
• Maximum five icons are displayed in the App dock and they are editable.
06 Quick Panel
Swipe down from the top of the screen to open the Quick Panel .
• The Quick Panel provides quick access to various settings.
• For more information on Quick Panel icons, see Display icon descriptions,
see page 36.
Untitled-1 35Untitled-1 35 2025-03-24 11:00:122025-03-24 11:00:12
Operations
English36
Display icon descriptions
Home Tap to go to the Home screen.
Door Lock
• This icon indicates the door is locked and cannot be opened.
• The door locks automatically during a cycle and this icon turns on.
• You can open the door when this icon disappears.
Smart Control • This icon indicates that the Smart Control is on.
Wi-Fi Tap to turn on or off the Wi-Fi .
Bluetooth
Tap to turn on or off the Bluetooth .
• Once you turn on the Bluetooth , you can connect to Bluetooth-enabled
devices near the washer.
Microphone Tap to turn on or off the microphone.
Drum light
Tap to turn on or off the drum light.
• You can turn on the light for better visibility of the items inside the drum.
Settings Tap to change the General and Washer settings.
Washer
This icon appears during a washing process. Tap cycle card to change the
default wash cycle settings. You can see the full option list by tapping
button.
• Temp. : Tap to change the water temperature for the selected cycle.
• Spin : Tap to change the spin speed for the selected cycle.
- Rinse Hold & No Spin : The final rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain or spin
process.
- Drain & No Spin : The drum does not spin after the final drain process.
• Soil : Tap to change the soil level for the current cycle.
• Detergent : You can select the amount of the detergent to be dispensed
during each wash cycle.
• Softener : You can select the amount of the softener to be dispensed
during each wash cycle.
• Extra Rinse : Adds an additional rinse at the end of the cycle to remove
laundry additives more thoroughly.
- Tap to turn on or off this function.
• Bubble Soak : This function helps remove a wide variety of stubborn
stains. With Bubble Soak selected, laundry is thoroughly soaked in water
bubbles for effective washing.
- Tap to turn on or off this function.
Untitled-1 36Untitled-1 36 2025-03-24 11:00:132025-03-24 11:00:13
English 37
Open Door
Tap this button to open the door.
• The button deactivates when the door is open and reactivates when the
door is closed.
Start You can start the operation.
Pause
You can pause the operation.
• During the operation, tap the button to pause.
Untitled-1 37Untitled-1 37 2025-03-24 11:00:132025-03-24 11:00:13
Operations
English38
Operating a cycle
01
02
04
03
1. Tap to turn the power on.
2. Select the desired cycle.
- For more information on Cycle overview, see page 40.
3. Change the default cycle options.
- For the washing process, tap Temp. , Spin , Soil , Detergent , Softener , Extra Rinse , or Bubble Soak to
change the default cycle settings.
- You can set the Delay End function.
- Not all cycles have additional functions available.
4. Tap to start the operation.
- Once you set the cycle you want, the screen displays brief cycle descriptions and cycle duration. You
can also check the cycle progress, remaining cycle time, and information codes.
NOTE
To change the cycle, tap More cycles , and then select the desired cycle.
Untitled-1 38Untitled-1 38 2025-03-24 11:00:142025-03-24 11:00:14
English 39
Changing the cycle settings
Tap the desired button to change the default wash cycle settings.
Temp. Tap to change the water temperature for the selected cycle.
Spin
Tap to change the spin speed for the selected cycle.
• Rinse Hold & No Spin : The final rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain or spin
process.
• Drain & No Spin : The drum does not spin after the final drain process.
Soil Tap to change the soil level for the current cycle.
Detergent
You can select the amount of the detergent to be dispensed during each wash
cycle.
Softener
You can select the amount of the softener to be dispensed during each wash
cycle.
Extra Rinse
Adds an additional rinse at the end of the cycle to remove laundry additives
more thoroughly.
• Tap to turn on or off this function.
Bubble Soak
This function helps remove a wide variety of stubborn stains. With Bubble Soak
selected, laundry is thoroughly soaked in water bubbles for effective washing.
• Tap to turn on or off this function.
Untitled-1 39Untitled-1 39 2025-03-24 11:00:142025-03-24 11:00:14
Operations
English40
Cycle overview
Cycle descriptions
You can add or delete cycles to personalize the cycle list in the My cycles option. See page for more
information.
NOTE
Energy savings will vary depending on loads and cycles. Energy consumption could increase if the LCD
screen is set to stay on all year long.
Cycle Description
Normal
• For cottons, bed linens, table linens, underwear, towels, or shirts.
The washing time and the rinse count are automatically adjusted
according to the load.
• Default energy cycle for drying: Normal
- To access the Normal cycle on the LCD models, turn on the power,
and select Cycle > Normal .
Heavy Duty • For sturdy, colorfast fabrics and heavily soiled items.
Bedding
• For bulky items such as comforters, blankets, and sheets.
• For best results, wash only 1 type of bedding.
• For bulky items, use liquid detergent and do not roll the items in the
drum because they might get stuck in the drum.
Perm Press
• For wash-and-wear, synthetic fabrics, and lightly to normally soiled
items.
Delicates
• For sheer fabrics, bras, lingerie (silk), and other handwash-only
fabrics.
• Using specialty detergent in the Dispenser 2 is recommended.
Activewear
• For exercise wear such as sports jerseys, training pants, shirts/tops
and other performance clothing. This cycle provides effective soil
removal with controlled drum rotation for special fabric care.
• Using specialty detergent in the Dispenser 2 is recommended.
Wool
• Specific for machine-washable wool for loads less than 4 lb (2.0 kg).
• The Wool cycle features fine pulsating and soaking to protect the
wool fibres from shrinkage/distortion.
• Using specialty detergent in the Dispenser 2 is recommended.
Towels • For bath towels, washcloths, and mats.
Eco Cold
• For normally and lightly soiled items. This cycle uses only cold water
to save energy. Cold water also helps prevent fabric damage.
Untitled-1 40Untitled-1 40 2025-03-24 11:00:142025-03-24 11:00:14
English 41
Cycle Description
Rinse+Spin
• Features an additional rinse process after fabric softener is applied
to the laundry.
Drum Clean+
• Cleans the drum by removing dirt and build-up from the drum.
• Perform once every 40 washes.
• Make sure the drum is empty.
Small Load
• For lightly soiled items that you want to finish washing quickly.
• For best performance, recommended load is 4 lb (2.0 kg) or lower.
Colors
• This cycle washes items in low-temperature water to prevent
discoloration.
Spin Only • To perform the spin process only.
AI OptiWash+
• The washer detects the type, weight, and soil level of your laundry,
and then selects the wash cycle settings accordingly. For example,
the washer will add more detergent*, washing time, and rinse count
if your laundry is heavily soiled, and it will select appropriate settings
to handle delicate items.
- * : We recommend enabling the Auto Dispense function if you use
the AI OptiWash+ cycle. Enable the Auto Dispense function if you
want the washer to adjust the detergent amount automatically
according to the soil level of your laundry.
- Based on internal testing using the AI OptiWash+ cycle on an IEC
8 lb load. A turbidity sensor operates for all weight while fabric
sensing operates for 8 lb and under. Actual results may vary
depending on individual use.
Outdoor
• For outdoor clothes, skiwear, and sportswear that are made of
functional materials such as spandex, stretch, and micro-fibre.
Denim
• Featuring a higher water level in the main wash and an extra rinse
cycle to ensure that no powder detergent remains.
Super Speed
• The shortened time may differ depending on the load/options.
• For best performance, recommended load is 10 lb (4.5 kg) or lower.
Steam Sanitize
• For colorfast fabrics and heavily soiled laundry, this cycle heats the
supplied water over 60 °C (140 °F) to clean deeply.
• If you stop running the cycle while the washer is heating the water,
the door remains locked for your safety.
Steam Allergen
• To remove dust, pollen, and other non-living allergen substances
from fabric.
Steam Normal • For washing everyday garments with steam.
Steam Whites • For white items. You can wash with or without bleach.
Untitled-1 41Untitled-1 41 2025-03-24 11:00:142025-03-24 11:00:14
Operations
English42
Cycle Description
Power Rinse • To wash with powerful rinsing performance.
Less Microfiber
• Use this cycle to reduce the amount of microfibers generated during
washing synthetic clothes.
Tide POD Cold
• The Tide POD Cold cycle provides deep cleaning as the detergent
dissolves effectively even in cold water.
• Appropriate for the household laundry loads when used with Tide
Power PODs.
Untitled-1 42Untitled-1 42 2025-03-24 11:00:142025-03-24 11:00:14
English 43
Cycle chart
Use this chart to set the best cycle and options for your laundry.
Wash Cycle chart
: factory setting, : can be selected
Cycle
Functions
Temp.
Extra Hot Hot Warm Cold Tap Cold
Normal
Heavy Duty
Bedding
Perm Press
Delicates
Activewear
Wool
Towels
Eco Cold
Rinse+Spin
Drum Clean+
Small Load
Colors
Spin Only
AI OptiWash+
Outdoor
Denim
Super Speed
Steam Sanitize
Steam Allergen
Steam Normal
Steam Whites
Power Rinse
Less Microfiber
Tide POD Cold
Untitled-1 43Untitled-1 43 2025-03-24 11:00:142025-03-24 11:00:14
Operations
English44
Cycle
Functions
Spin
Wash Only
Extra High High Medium Low Extra Low
Drain & No
Spin
Rinse Hold
& No Spin
Normal
Heavy Duty
Bedding
Perm Press
Delicates
Activewear
Wool
Towels
Eco Cold
Rinse+Spin
Drum Clean+
Small Load
Colors
Spin Only
AI OptiWash+
Outdoor
Denim
Super Speed
Steam Sanitize
Steam Allergen
Steam Normal
Steam Whites
Power Rinse
Less Microfiber
Tide POD Cold
Untitled-1 44Untitled-1 44 2025-03-24 11:00:142025-03-24 11:00:14
English 45
Cycle
Functions
Soil level
Extra Heavy Heavy Normal Light Extra Light
Normal
Heavy Duty
Bedding
Perm Press
Delicates
Activewear
Wool
Towels
Eco Cold
Rinse+Spin
Drum Clean+
Small Load
Colors
Spin Only
AI OptiWash+
Outdoor
Denim
Super Speed
Steam Sanitize
Steam Allergen
Steam Normal
Steam Whites
Power Rinse
Less Microfiber
Tide POD Cold
Untitled-1 45Untitled-1 45 2025-03-24 11:00:142025-03-24 11:00:14
Operations
English46
Cycle
Functions
Bubble Soak Extra Rinse Super Speed
Normal
Heavy Duty
Bedding
Perm Press
Delicates
Activewear
Wool
Towels
Eco Cold
Rinse+Spin
Drum Clean+
Small Load
Colors
Spin Only
AI OptiWash+
Outdoor
Denim
Super Speed
Steam Sanitize
Steam Allergen
Steam Normal
Steam Whites
Power Rinse
Less Microfiber
Tide POD Cold
Untitled-1 46Untitled-1 46 2025-03-24 11:00:152025-03-24 11:00:15
English 47
Settings
Using Settings
1. Swipe down from the top of the screen to open the Quick Panel and tap .
2. Tap General or Washer .
3. Scroll through the screen to select the desired menu.
4. Change the settings or start the function.
NOTE
• To return to the Home screen, tap < on the top left corner, or on the top right corner of the screen.
• If the selected function is not supported, the " Currently not supported " message is displayed, and the
OK button is not activated.
• When you select an additional function, a brief help message appears for the first ten times of use.
Settings menu description
General
Options Descriptions
Samsung Account You can log in to your Samsung account or create a new Samsung account.
Connections
You can turn the Wi-Fi on or off. You can also start the Smart Control
function.
• Wi-Fi : Tap to turn on or off the Wi-Fi.
- The washer's Wi-Fi is off as a factory default setting. However,
the washer's Wi-Fi turns on automatically when you turn on the
washer for the first time. Then, the final Wi-Fi setting is maintained
regardless of the washer power status.
- Once you turn on the washer's Wi-Fi and connect to a network, the
washer remains connected to the network even when you turn off
the power.
- The Wi-Fi indicates that the washer is connected to the router
through the Wi-Fi connection.
• Easy Connection : You can easily install the SmartThings app using the
displayed QR code on the screen.
- You can connect to the SmartThings app and control your washer
remotely.
Untitled-1 47Untitled-1 47 2025-03-24 11:00:152025-03-24 11:00:15
Operations
English48
Options Descriptions
Lock
You can lock the control of the washer to prevent children or infants from
accidentally starting or setting the washer.
• When Lock is enabled, the touch screen and the door become locked for
safety.
• You can enable/disable Lock in any selected cycle.
• Press and hold the Unlock button for 3 seconds to unlock.
NOTE
• If you want to put additional items into the washer while Lock is
enabled, you must disable the Lock function first.
• You cannot open the door after a wash cycle when the Lock is on.
Disable the function first, and then open the door and take out the
laundry.
- Turn on the power, tap > General > Lock and set the function to
Off . Then, you will be able to open the door.
Sounds
You can set the Sound mode , Sound theme , Volume , and Voice style .
• Sound mode : You can set the desired Sound mode from Voice , Tone , and
Mute .
- If you set the Sound mode to Mute , the alert sound will not be
turned off for safety purposes.
• Sound theme : You can select the desired Sound theme . Tap a theme
once to preview the sound.
• Volume : You can adjust the volume for system and media sounds.
- Sound mode will automatically change to Voice if you adjust the
volume while the Sound mode is set to Mute .
• Voice style : You can select the desired Voice style . Tap a style once to
preview the sound.
Home device notifications
You can turn on or off the notifications for your home devices registered on
the SmartThings app.
Display You can set the Brightness and Font size .
Bixby
You can set the Voice wake-up and Sound feedback options.
NOTE
• The microphone for voice recognition is built into the washer's worktop.
- The best way to use the voice recognition function is to stand
within 3 feet (1 meter) of the washer, reduce any background noise,
and speak loudly and clearly at a steady pace toward the built-in
microphone.
• The voice recognition function may not work if you stand more than 3
feet (1 meter) away or if you speak too softly.
Untitled-1 48Untitled-1 48 2025-03-24 11:00:152025-03-24 11:00:15
English 49
Options Descriptions
Microphone You can enable or disable the use of the microphone.
App lock You can set a passcode to lock an app.
Storage You can check the washer’s internal storage space.
Security status of your
devices
You can check the security status of all devices logged into your Samsung
account.
Language You can change the system language.
Date and time
You can set the time and date automatically or manually and set the
desired time format.
Liquid units You can select the liquid units.
Accessibility
You can set the Screen reader and Visibility enhancements settings.
• Screen reader : Enable this feature to receive voice guidance from your
washer.
- Turn on the power, tap - Accessibility - Screen reader , and tap On
to enable the feature.
- When the Screen reader feature is enabled, tapping an item once
will read it aloud, and tapping it twice will execute the action. You
can also navigate the screen by swiping in any direction with two
fingers.
- Some options in the menu may be unavailable while the Screen
reader feature is enabled.
NOTE
To disable the feature, follow these instructions. (single tap: select /
double-tap: execute):
1. Select at the top right of the screen and double-tap to enter the
menu.
2. In the menu, swipe the screen with two fingers to find and select
Accessibility , and then double-tap to enter the menu.
3. Select Screen reader , and double-tap to enter the menu.
4. Select Off and double-tap to change the setting.
• Visibility enhancements : You can change the High contrast and Text
size settings to enhance the visibility.
Software update
You can download and install the latest version of the software.
Download begins automatically when the washer is connected to Wi-FI.
Support
You can check the user guide or start the remote support service.
• Get remote support for all your needs related to your appliance.
Untitled-1 49Untitled-1 49 2025-03-24 11:00:152025-03-24 11:00:15
Operations
English50
Options Descriptions
Reset
You can reset network settings or reset all settings.
• Reset network settings : Turn on the power, tap - General - Reset -
Reset network settings - Reset in that order.
- This will reset the Wi-Fi and SmartThings connection settings.
• Reset all settings : Turn on the power, tap - General - Reset - Reset
all settings - Reset in that order.
- This will reset all the settings, including network settings and
personal data.
- Your washer resets to the factory setting.
• Restart : Restart the device.
About device
You can check the information of the washer such as Status and Legal
information .
Untitled-1 50Untitled-1 50 2025-03-24 11:00:152025-03-24 11:00:15
English 51
Washer
Options Descriptions
Drum light
This turns on the light inside the drum so you can check the status of the
items inside.
Auto dispensers
You can select the dispenser mode and set the detergent type,
concentration, and amount setting. The washer automatically dispenses an
adequate amount of detergent for the selected cycle.
• Dispenser mode : You can select the Dispenser mode . The default
setting is General and Softener .
- You can select General and Softener , General and Specialty , or
General and General .
• Detergent type
- Dispenser 1 : You can only select General .
- Dispenser 2 : You can set this dispenser to dispense detergent
( General , Specialty ) or softener.
• Concentration : You can change the concentration level.
- 1x > 2x > 3x
- The default setting is 1x.
• Amount : You can select the amount of the detergent to be dispensed
during each wash cycle.
- Low > Medium > High
- The default setting is Medium .
NOTE
• You can enable and disable automatic detergent dispensing and set
the detergent amount to be dispensed for each cycle. You must put
detergent manually if you disable the automatic detergent dispensing.
• For the cycles that require the use of special detergent, only the
available options are displayed.
Pump clean
You can use this function to clean detergent or softener residue buildup in
the pump.
Use this function after you empty and clean the dispenser.
• You can select from Auto dispensers , Flex auto dispenser , or Auto
dispensers / Flex auto dispenser .
- Pour water up to the MAX line in the dispenser, and then tap Start
cleaning .
NOTE
During the pump cleaning process, the drum rotates to drain water. When
the pump cleaning process is complete, the water inside the dispenser(s)
will drain automatically.
Untitled-1 51Untitled-1 51 2025-03-24 11:00:152025-03-24 11:00:15
Operations
English52
Options Descriptions
My cycles
Add or remove cycles to create a personal cycle list.
• You can only edit a cycle to create a personal cycle when the washer is
not operating.
NOTE
• The Normal and Product Care cycle cannot be removed from the list of
cycles.
• You can also edit My cycles in the SmartThings app.
AI pattern
This function saves frequently used cycles and settings. When you turn
the function on, the washer remembers the cycles you use most and their
settings and displays them in frequency order.
• The default setting is On . Set it to Off if you do not want to use this
function.
• When you turn off the function, all the saved data resets.
Auto open door
You can set the washer door to open automatically after the cycle is
finished.
• The default setting is Open immediately . However, if you perform only
the washing process, the Open 5 mins later setting applies.
• You can select from Open 5 mins later , or Open immediately .
NOTE
• Available options for the Auto open door function are active only when
the function is on. The options are inactive when the function is off.
• The Auto open door function does not work when Lock is enabled.
• The door will not open at the end of the cycle if you have enabled the
Stay Connect function in the SmartThings app.
Calibration
You can run calibration again for accurate weight detection.
• Calibration does not start if the door is not closed properly.
• The drum rotates clockwise and counterclockwise for about 3 minutes.
Self Diagnosis
You can use this function to check for abnormal signs on your washer.
• If the washer detects an error, an information code and solution is
displayed on the LCD panel.
Dryer connection
This menu is only available when a dryer is connected to the washer. You
can check and manage the connection status.
Untitled-1 52Untitled-1 52 2025-03-24 11:00:152025-03-24 11:00:15
English 53
Delay End
You can set the washer to finish your wash automatically at a later time, choosing a delay of between
5 hours to 24 hours.
1. Select a cycle and change the cycle settings as necessary.
2. Tap Delay End at the bottom of the Cycle screen.
3. Set the desired end time, and then tap OK .
- Status shows in the display and the washer tumbles the drum to sense the weight of the load (if
load sensing is preset for the selected cycle). When load sensing is complete, the display shows the
remaining time until the end of the wash cycle.
- The time at which the operation ends may vary depending on the amount and condition of the
laundry items.
- To cancel Delay End , tap Stop to restart the washer.
Untitled-1 53Untitled-1 53 2025-03-24 11:00:152025-03-24 11:00:15
Operations
English54
Special features
Smart Control
You can connect to the SmartThings app and control your washer remotely.
Connecting your washer
1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2. Tap to turn on the washer.
3. Swipe down from the top of the screen to open the Quick Panel and tap .
a. The washer enters AP mode and connects to your smartphone or tablet.
b. Tap to authenticate your washer.
c. Once the authentication process is complete, your washer is successfully connected to the app.
- You can use various features available in the SmartThings app.
NOTE
• If your washer fails to connect with the SmartThings app, try again.
• Check your router if you experience any Internet connection problem after connecting your washer with
the SmartThings app.
• If the Wi-Fi is off, tap and hold > Connections , and then turn the Wi-Fi on.
• Turning the washer's Wi-Fi on allows you connect to the washer through the SmartThings app on your
smartphone or tablet, regardless of the power status of the washer. However, the washer appears
offline on the SmartThings app if the washer's Wi-Fi is off.
• Close the door before starting the Smart Control function.
• If you use your washer for a while without connecting it to the SmartThings app, a pop-up message
about Smart Control will show for 3 seconds on 20th, 40th, and 60th use.
• If the washer's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you turn of
the power.
Stay Connect
Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a
cycle. Your washer stays connected to the app so you can send additional instructions, whether you are at
home or away.
1. If you turn on the Stay Connect function on the SmartThings app, the washer will stay in standby power
saving mode after completing a cycle.
- The Stay Connect function will remain active for up to 24 hours if the door remains closed.
2. When the Stay Connect function is active, the Smart Control , Door Lock , and Wi-Fi icons are illuminated
on the LCD display.
3. You can conveniently control your washer, adding rinse, spin cycles using the SmartThings app.
NOTE
• The washer switches to standby power saving mode when operation is paused even if the machine is
not connected to the SmartThings app.
• In some circumstances, only the Lock icon may be illuminated.
Untitled-1 54Untitled-1 54 2025-03-24 11:00:152025-03-24 11:00:15
English 55
SmartThings
Wi-Fi connection
On your smartphone or tablet, go to Settings and turn on the wireless connection and select an AP (Access
Point).
• This appliance supports the Wi-Fi 2.4 GHz and 5 GHz protocols.
Download
On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps), find the SmartThings app by
searching for " SmartThings ". Download and install the app on your device.
NOTE
The app is subject to change without notice for improved performance.
Log in
You must first log into SmartThings with your Samsung account. To create a new Samsung account, follow
the instructions on the app. You don’t need a separate app to create your account.
NOTE
If you have a Samsung account, use the account to log in. A registered Samsung smartphone or tablet user
automatically logs in.
Untitled-1 55Untitled-1 55 2025-03-24 11:00:152025-03-24 11:00:15
Operations
English56
To register your appliance to SmartThings
1. Make sure your smartphone or tablet is connected to a wireless network. If not, go to Settings and turn
on the wireless connection and select an AP (Access Point).
2. Open SmartThings on your smartphone or tablet.
3. If a message of " A new device is found. ", select Add .
4. If no message appears, select + and select your appliance in a list of devices available. If your appliance
is not listed, select Device Type > Specific Device Model , and then add your appliance manually.
5. Register your appliance to the SmartThings app as follows.
a. Add your appliance to SmartThings . Make sure your appliance is connected to SmartThings .
b. When registration is complete, your appliance appears on your smartphone or tablet.
If you're moving out, we recommend you completely wipe the appliance and do a network reset on it before
you leave it behind.
If you're moving in, the easiest way to take control and remove the previous user's access is to add it to
SmartThings yourself. But if you don't plan on using SmartThings , a network reset should be performed to
protect your privacy. In rental properties, there’s a regular change of ownership. To ensure resident privacy,
Wi-Fi and/or other connectivity settings should be reset at each change of resident. Please refer to factory
reset instructions in this manual.
Untitled-1 56Untitled-1 56 2025-03-24 11:00:162025-03-24 11:00:16
English 57
Maintenance
Keep the washer clean to prevent deteriorated performance and to preserve its life cycle.
WARNING
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during
servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control
board, heat sink, motor, inlet valve and pump.
Product Care
The Product Care screen offers maintenance tips to keep your washer clean and prolong the product life
cycle.
You can check the remaining number of cycles until the next Drum Clean+ duration, and start the Drum
Clean+ cycle.
NOTE
If the Product Care cycle needs to be performed, a guide message will appear on the Home screen. Follow
the on-screen instructions to run the Drum Clean+ cycle.
1. On the Home screen tap Product Care to move to the Product Care screen.
2. Tap Clean now or Start cleaning under the desired option to start the care cycle.
- All the options for the Product Care cycle are set automatically.
- If the drum requires cleaning, all the necessary options for the Product Care cycle are set
automatically.
3. Tap to move to the Home screen.
Untitled-1 57Untitled-1 57 2025-03-24 11:00:162025-03-24 11:00:16
Maintenance
English58
Drum Clean+
Certain usage and environmental conditions may result in some residue build-up or odor in the drum. To
prevent this build-up or odor and keep the drum fresh and clean, perform the Drum Clean+ cycle at least
once a month or every 40 cycles. Perform the recommended procedure below when using the Drum Clean+
cycle.
1. Tap .
2. On the cycle screen, select Product Care > Drum Clean+ .
3. Tap Clean now .
CAUTION
If there is chlorine bleach left in the drum for an extended period of time, rust can occur.
NOTE
• The water temperature for Drum Clean+ is defaulted to Extra Hot. This temperature cannot be changed.
• In the case where residue is present in the drum, add liquid chlorine bleach to the MAX level line in
the Manual bleach compartment before starting the Drum Clean+ cycle. Do not add the liquid chlorine
bleach to the other compartments (This is only the case for Drum Clean+ cycle).
• Do not exceed the max line. Do not use or mix any other detergent or chemicals during the Drum Clean+
cycle. If necessary, run a Rinse+Spin cycle after the Drum Clean+ cycle has completed to help remove
any remaining residue.
Drum Clean+ reminder
• After every 40 cycles, the washer displays the " Time to run Drum Clean+. Press Clean now to start the
Product care cycle. " message for an hour to alert you to run the Drum Clean+ cycle.
• It is recommended to run the cycle regularly for hygienic purposes.
• You will see the Drum Clean+ alert message when the washer completes a cycle. If you open the door,
the message disappears, and the display shows the Drum Clean+ cycle setting screen automatically. At
this time, the LCD panel displays the recommended drying cycle.
• The reminder will appear on the LCD panel for 5 additional consecutive cycles before turning off. The
next reminder will not appear until another 40 cycles have been completed.
Untitled-1 58Untitled-1 58 2025-03-24 11:00:162025-03-24 11:00:16
English 59
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
1. Power off and unplug the washer from the electrical
outlet.
2. Gently press the top area of the filter cover to open.
3. Put an empty, spacious container around the
cover, and stretch the emergency drain tube to the
container while holding the tube cap (A).
4. Open the tube cap and let water in the emergency
drain tube (B) flow into the container.
5. When done, close the tube cap, and reinsert the tube.
Then, close the filter cover.
NOTE
Use a spacious container because the water in the drum
may be more than expected.
Untitled-1 59Untitled-1 59 2025-03-24 11:00:162025-03-24 11:00:16
Maintenance
English60
Cleaning
Surface of the washer
Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washer.
Mesh filter
Clean the mesh filter of the water hose once or twice a year.
1. Turn off the washer, and unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose from the back
of the washer. Cover the end of each hose with a cloth
or towel to prevent water from gushing out.
4. Use pliers to pull out the mesh filter from the inlet
valve.
5. Submerge the mesh filter deeply in water so that the
threaded connector is also submerged.
6. Dry the mesh filter completely in the shade.
7. Reinsert the mesh filter into the inlet valve, and
reconnect the water hose to the inlet valve.
8. Open the water tap.
NOTE
• If the mesh filter is clogged, an information code of " 4C" appears on the screen.
• Clean the mesh filter of the water hose more frequently if water is provided by an aged water system or
well.
Untitled-1 60Untitled-1 60 2025-03-24 11:00:162025-03-24 11:00:16
English 61
Drain filter
It is advisable to clean the drain filter every 2 months to prevent its clogging.
1. Turn off the washer, and unplug the power cord.
2. Drain the remaining water inside the drum. See the
Emergency drain section.
3. Gently press the top area of the filter cover to open.
4. Turn the drain filter knob to the left, and drain off the
remaining water.
5. Clean the drain filter using soft brushes. While the
drain filter is removed, make sure the impeller inside
the drain pump is free of debris.
6. Reinsert the drain filter, and turn the filter knob to
the right.
NOTE
Some drain filters feature a safety knob that is designed
to prevent accidents by children. To open the safety knob
of the drain filter, push in and turn it anticlockwise. The
spring mechanism of the safety knob helps open the
filter.
NOTE
If the drain filter is clogged, an information code of " 5C" appears on the screen.
CAUTION
• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an operational
failure or a leak.
Untitled-1 61Untitled-1 61 2025-03-24 11:00:172025-03-24 11:00:17
Maintenance
English62
Detergent drawer
Flex Auto
Dispenser
Make su
re
you
clean a d
ispens
er
regularly.
Only u
se
liquid
in
the auto
disp
enser
.
NOTE
Auto
Dispenser
Manual
Bleach
Manual
Detergent
1. While holding down the release lever on the inner of
the drawer, pull the detergent drawer to remove.
Fle
x Au
t
o
D
ispenser
M
ak
e
s
u
r
e
you
c
le
a
n
a
d
i
s
p
e
n
s
e
r
r
e
g
ul
a
r
l
y
.
O
n
ly
u
s
e
li
q
uid
i
n
t
h
e
a
uto d
is
p
e
ns
e
r.
NO
TE
Auto
Dispe
ns
er
M
anu
a
l
Blea
ch
M
anu
a
l
Dete
r
g
e
nt
2. Remove the covers of both dispensers using the pull
tabs located on the back of the lid, then clean inside
the dispensers under warm running water with a soft
brush.
3. Clean the drawer components in warm running water
using a soft brush.
- Wipe all components with a dry towel or cloth
after cleaning.
NOTE
If the cleaning agent in the dispenser is hardened,
open the dispenser, and pour lukewarm water into the
dispenser to dissolve the hardened agents. Then, clean
inside the dispenser and its rear valve thoroughly.
4. Clean the drawer recess using a bottle brush to
remove detergent residues and limescale on the
drawer recess.
Untitled-1 62Untitled-1 62 2025-03-24 11:00:172025-03-24 11:00:17
English 63
Flex Auto
Dispenser
Ma
k
e s
u
re
y
ou
c
le
a
n a disp
e
ns
e
r
r
e
g
u
lar
ly
.
On
ly
us
e
liquid in
t
h
e
au
t
o
d
isp
e
n
se
r.
N
OT
E
Aut
o
Dispenser
Manua
l
Bleach
Manua
l
D
etergent
5. Insert the detergent drawer back into the washer.
NOTE
• Make sure the drawer recess is completely dry before
inserting the detergent drawer.
• Cover the covers of both dispensers and re-insert
them into the drawer.
CAUTION
Do not spray water into the detergent drawer recess. This may result in electric shock or fire.
Door diaphragm
A
1. Open the door, and then empty the drum.
2. Combine 3/4 cups of liquid chlorine bleach and 1
gallon of warm tap water.
3. Wearing rubber gloves, use a soft, clean cloth
dipped in the water and bleach solution to clean the
diaphragm.
4. Let stand 5 minutes, and then wipe up and dry well.
CAUTION
Use bleach carefully and be sure to follow the bleach manufacturer’s use and care instructions.
Untitled-1 63Untitled-1 63 2025-03-24 11:00:182025-03-24 11:00:18
Maintenance
English64
Recovery from freezing
The washer may freeze when the temperature in its location drops below 32 °F (0 °C).
1. Turn off the washer, and then unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and then soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.
NOTE
If the washer still doesn’t operate normally, repeat the steps above.
Care for an extended period of non-use
Avoid leaving the washer unused for an extended time. However, if you intend to leave the washer unused
for a long period of time, follow the directions below:
1. Tap .
2. On the cycle screen, select Rinse+Spin .
3. Empty the drum, and then tap and hold .
4. When the cycle is complete, close the water taps and disconnect the water hoses.
5. Turn off the washer, and then unplug the power cord.
6. Open the door to let air circulate through the drum.
Untitled-1 64Untitled-1 64 2025-03-24 11:00:182025-03-24 11:00:18
English 65
Cleaning the exterior
1. Turn off the water taps after finishing the day’s washing.
This will shut off the water supply to your washer and prevent the unlikely possibility of damage from
escaping water. Leave the door open to allow the inside of your washer to dry out.
2. Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur. Clean the following as
recommended below:
- Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not
spray cleaners directly on the panel.
- Cabinet – Clean with soap and water.
CAUTION
Make sure to turn off the washer and unplug the power cord before cleaning.
Cleaning the interior
Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial
residue that may remain in your washer as a result of washing clothes.
CAUTION
Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent
stains on your washer or laundry.
NOTE
Hard water deposits may be removed, if needed. Use a cleaner labeled "Washer safe".
Untitled-1 65Untitled-1 65 2025-03-24 11:00:182025-03-24 11:00:18
English66
Troubleshooting
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
Checkpoints
If you encounter a problem with the washer, first check the table below and try these suggestions.
Problem Action
Does not start.
• Make sure the washer is plugged in.
• Make sure the door is properly closed.
• Make sure the water taps are open.
• Tap to start the washer.
• Make sure Lock is not activated.
• Before the washer starts to fill, it will make a series of clicking noises to
check the door lock and will do quick drain.
• Check the fuse or reset the circuit breaker.
• Check if power is supplied properly.
• Low voltage detected.
- Check if the power cord is plugged in.
• Make sure laundry is not caught in the door.
• Clean the filter.
Water supply is
insufficient, or no water is
supplied.
• Fully open the water tap.
• Make sure the door is properly closed.
• Make sure the water supply hose is not frozen.
• Make sure the water supply hose is not kinked or clogged.
• Make sure there is sufficient water pressure.
• Make sure that the cold water tap and the hot water tap are properly
connected.
• Clean the mesh filter as it may be clogged.
After a cycle, detergent
remains in the detergent
drawer.
• Make sure the washer is running with sufficient water pressure.
• Make sure the detergent is added to the center of the detergent drawer.
• Make sure the rinse cap is inserted properly.
• If using granular detergent, make sure the detergent selector is in the
upper position.
• Remove the rinse cap and clean the detergent drawer.
Untitled-1 66Untitled-1 66 2025-03-24 11:00:182025-03-24 11:00:18
English 67
Problem Action
Excessive vibrations or
makes noise.
• Make sure the washer is installed on a level, solid floor that is not
slippery. If the floor is not level, use the leveling feet to adjust the
height of the washer.
• Make sure the shipping bolts are removed.
• Make sure the washer is not in contact with any other object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or clothes with metallic decorations can cause noise while
being washed. This is normal.
• Metal objects such as coins can cause noise. After washing, remove
these objects from the drum or filter case.
• The spinning process is not performing properly because there is not
enough laundry or the load is unbalanced.
- Add more laundry or redistribute the items, then tap Start to restart
the washer. Or, turn off the product and turn it back on after 2-3
minutes, then try again.
• Remove any items stuck inside the lint filter.
Does not drain and/or
spin.
• Make sure the drain hose is not kinked between the unit and drain
system. If you encounter a drain problem, call for service.
• Make sure the drain filter is not clogged.
• Close the door and tap .
For your safety, the washer will not tumble or spin unless the door is
closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that is not
clogged.
• If the washer is not supplied with sufficient power, the washer will
temporarily not drain or spin. As soon as the washer regains sufficient
power, it will operate normally.
• Make sure the drain hose is positioned correctly, depending on the
connection type.
• Clean the drain filter as it may be clogged.
Untitled-1 67Untitled-1 67 2025-03-24 11:00:182025-03-24 11:00:18
Troubleshooting
English68
Problem Action
The door does not open.
• Tap to stop the washer.
• It may take a few moments for the door lock mechanism to disengage.
• The door will not open until 3 minutes after the washer has stopped or
the power has been off.
• Make sure all the water in the drum is drained.
• The door may not open if water remains in the drum. Drain the drum
and open the door manually.
• Make sure the door lock light is off. The door lock light turns off after
the washer has drained.
• Power off and restart the unit.
Excessive suds.
• Make sure you use the recommended types of detergent as appropriate.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Reduce the detergent amount for soft water, small loads, or lightly
soiled loads.
• Non-HE detergent is not recommended.
Cannot add additional
detergent.
• Make sure the remaining amount of detergent and fabric softener is not
over the limit.
Stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door, and tap to start the washer. For your safety, the
washer will not tumble or spin unless the door is closed.
• Before the washer starts to fill, it will make a series of clicking noises to
check the door lock and will do quick drain.
• There may be a pause or soak period in the cycle. Wait briefly, and the
washer may start.
• Make sure the mesh filter of the water supply hose at the water taps is
not clogged. Periodically clean the mesh filter.
• If the washer is not supplied with sufficient power, the washer will
temporarily not drain or spin. As soon as the washer regains sufficient
power, it will operate normally.
Untitled-1 68Untitled-1 68 2025-03-24 11:00:182025-03-24 11:00:18
English 69
Problem Action
Fills with the wrong water
temperature.
• Fully open both taps.
• Make sure the temperature selection is correct.
• Make sure the hoses are connected to the correct taps. Flush water
lines.
• Make sure the water heater is set to supply a minimum of 49 °C hot
water at the tap. Also, check the water heater capacity and recovery
rate.
• Disconnect the hoses and clean the mesh filter. The mesh filter may be
clogged.
• While the washer fills, the water temperature may change as the
automatic temperature control feature checks incoming water
temperature. This is normal.
• While the washer fills, you may notice just hot and/or just cold water
going through the dispenser when cold or warm temperatures are
selected. This is a normal function of the automatic temperature control
feature as the washer determines the water temperature.
Load is wet at the end of
a cycle.
• Use the High or Extra High spin speed.
• Use high efficiency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
• Make sure the drain hose is not kinked or clogged.
Leaks water.
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and secured to
the drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Check the drain hose.
- Make sure the end of the drain hose is not placed on the floor.
- Make sure the drain hose is not clogged.
Items still wrinkled after
Wrinkle Prevent ( Wrinkle
Away , Wrinkle Release )
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
Untitled-1 69Untitled-1 69 2025-03-24 11:00:182025-03-24 11:00:18
Troubleshooting
English70
Problem Action
The clothes have lint on
them.
• Always make sure the lint filter is clean before putting items into the
washer. When drying items that generate a large amount of lint, you
may need to clean the lint filter in the middle of a cycle.
• Some fabrics (such as white towels) causes more lint and should be
dried separately from fabrics that lint attaches easily (such as black
linen pants).
• Check the inside of the pockets to make sure they are empty before
drying.
Has odors.
• Excessive suds collect in recesses and can cause foul odors.
• Run cleansing cycles to sanitise periodically.
• Clean the door seal (diaphragm).
• Dry the interior of the washer after a cycle has finished.
A message appears on
the display to alert that
dispenser is open.
• Check if the detergent drawer is closed properly.
- Open the detergent drawer and close it again. Make sure it’s closed
properly.
The " Needs refill "
message does not
disappear after refilling
the detergent/softener.
• After refilling the Dispenser 1 and Dispenser 2 , close the detergent
drawer, and then tap . Then, the washer will start to detect the
detergent/softener, and the message will disappear.
• Depending on the type of detergent/softener, the message may not
disappear immediately.
Detergent/softener is not
dispensed.
• Check if the Amount option for Dispenser 1 or Dispenser 2 is set to Off .
The automatic dispensers do not dispense the detergent if the option is
set to Off .
• Tap Settings , select Dispenser 1 or Dispenser 2 , and then change the
Amount option.
• The automatic dispensers are disabled in the Delicates , Activewear , or
Wool cycles. To dispense detergent in those cycles, tap Settings , select
Dispenser 1 or Dispenser 2 , and then change the Amount option.
Excessive or insufficient
amount of detergent/
softener is dispensed.
• Check the Amount option for Dispenser 1 or Dispenser 2 . Tap Settings ,
select Dispenser 1 or Dispenser 2 , and then change the Amount option.
Screen retention occurs
while using the LCD
screen.
• When the temperature around the washer is low, screen retention
may occur while using the LCD. It will function normally when the
temperature rises.
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
Untitled-1 70Untitled-1 70 2025-03-24 11:00:182025-03-24 11:00:18
English 71
Information codes
If there is any problem, check the information message on the LCD screen and follow the on-screen
instructions.
Problem Code Action
Check drainage 5C
• The washer isn't draining properly.
• Clean the drain filter, then tap Start to restart the washer.
Or, turn it off and on again after 2-3 minutes, then try
again.
NOTE
If you perform the Condenser Cleaning function without
connecting the water supply hose, you may see the 5C code
on the LCD display. In this case, please check the drainage
and water supply status.
Check water supply 4C
• Water isn't being supplied properly.
• Check the faucets, then tap Start to restart the washer. Or,
turn it on and off again after 2-3 minutes, then try again.
Please connect the
hot/cold water hose
connection correctly
4C2
• The water is too hot. Some fabrics need to be protected.
• Check if the water supply hoses are properly connected,
then tap Start to restart the washer. Or, turn it off and on
again after 2-3 minutes and try again.
Incorrect button state BC2
• A button on the washer is still pressed in.
• Turn off the washer, then turn it on again after 2-3 minutes
and try again.
Open the door and evenly
distribute the load
UB
• The spinning process is not performing properly because
there is not enough laundry or the load is unbalanced.
- Add more laundry or redistribute the items, then tap
Start to restart the washer. Or, turn off the product and
turn it back on after 2-3 minutes, then try again.
Waterproof items
detected
UB1
• Your laundry contains waterproof items.
• Remove those items, then tap Start to restart the washer.
Or, turn it off and on again after 2-3 minutes, then try
again.
Door is open DC • The door is open. Close it and try again.
Close the washer door and
try again
DC6
• Auto open door isn't working properly.
• If you turn off the power, the door will open. To use Auto
open door , turn off Lock and Smart control in SmartThings.
Untitled-1 71Untitled-1 71 2025-03-24 11:00:182025-03-24 11:00:18
Troubleshooting
English72
Problem Code Action
The door switch lock/
unlock is not working
properly.
DC1
• Turn off the washer, then turn it on again after 2-3 minutes
and try again.
• The door switch isn't working properly.
• Check for foreign substances around the door, then push
the door closed and try again.
Check filter is inserted
correctly
NC
• Check if the filter is inserted correctly, then tap Start to
restart the washer. Or, turn it off and on again after 2-3
minutes, then try again.
If any information code keeps appearing on the screen, contact a local Samsung service center.
Untitled-1 72Untitled-1 72 2025-03-24 11:00:182025-03-24 11:00:18
English 73
Specifications
Fabric care chart
The following symbols provide garment care
direction. The clothing care labels include
symbols for drying, bleaching, drying and ironing,
or dry cleaning when necessary. The use of
symbols ensures consistency among garment
manufacturers of domestic and imported items.
Follow care label directions to optimize garment
life and reduce laundering problems.
Wash cycle
Normal
Permanent press/Wrinkle resistant/
Wrinkle control
Gentle/Delicates
Hand wash
Water temperature
Ex Hot
Hot
Warm
Cold
Bleach
Any bleach (when needed)
Only non-chlorine (color-safe) bleach
(when needed)
Tumble dry
Normal
Permanent press/Wrinkle resistant/
Wrinkle control
Gentle/Delicates
Special instructions
Line dry/Hang to dry
Drip dry
Dry flat
Heat setting
High
Medium
Low
Any heat
No heat / Air
Iron dry or steam temperatures
High
Medium
Low
Untitled-1 73Untitled-1 73 2025-03-24 11:00:212025-03-24 11:00:21
Specifccaiion
English74
Warning symbols for laundering
Do not wash
Do not wring
Do not bleach
Do not tumble dry
No steam (added to iron)
Do not iron
Dry-clean
Dry-clean
Do not dry-clean
Line dry/Hang to dry
Drip dry
Dry flat
Protecting the environment
• This appliance is manufactured from recyclable materials. If you decide to dispose of it, please observe
local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected
to a power source. Remove the lid so that animals and small children cannot get trapped inside the
appliance.
• Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.
• Use stain removal products and bleaches before the wash cycle only when necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon the program
used).
Declaration of conformity
This appliance complies with UL2157.
Untitled-1 74Untitled-1 74 2025-03-24 11:00:222025-03-24 11:00:22
English 75
Specification sheet
Type
Front loading washer
WF90F53A**
Capacity (Cu.ft) 5.3
Water pressure (psi (kPa)) 20-116 (137-800)
NET weight (lb (kg)) 102.0
Spin revolution 1200 RPM
Heating rating 900 W
Power
consumption
Washing
120 V
200 W
Washing and
heating
1150 W
Spin 550 W
Drain 80 W
NOTE
You can fill the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub.
Untitled-1 75Untitled-1 75 2025-03-24 11:00:222025-03-24 11:00:22
English76
LIMITED WARRANTY (U.S.A.)
SAMSUNG WASHER
LIMITED WARRANTY TO ORIGINAL CONSUMER PURCHASER WITH PROOF OF PURCHASE AND/
OR PROOF OF DELIVERY
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials or workmanship for the following limited warranty
periods, starting on the date of delivery to the original consumer purchaser:
Parts and labor : One (1) year
Stainless tub part (Part Only) : Three (3) years
Washing DIT (Digital Inverter Motor) motor part (Part Only):
• Twenty (20) years
This limited warranty is valid only on products purchased and used in the United States that have been
installed, operated, and maintained according to the instructions attached to or furnished with the product.
To receive warranty service, the purchaser must contact SAMSUNG at the address or phone number
provided below for problem determination and service procedures. Warranty service can only be performed
by a SAMSUNG authorized service center. The original dated bill of sale and/or proof of delivery must be
presented upon request to SAMSUNG or SAMSUNG’s authorized service center to receive warranty service.
SAMSUNG will provide in-home service within the contiguous United States during the warranty period
at no charge, subject to availability of SAMSUNG authorized servicers within the customer’s geographic
area. If in-home service is not available, SAMSUNG may elect, at its option, to provide transportation of
the product to and from an authorized service center. If the product is located in an area where service by a
SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring
the product to a SAMSUNG authorized service center for service.
To receive in-home service, product must be unobstructed and accessible to the service agent.
During the applicable warranty period, a product will be repaired, replaced, or the purchase price refunded,
at the sole option of SAMSUNG. SAMSUNG may use new or reconditioned parts in repairing a product, or
replace the product with a new or reconditioned product. Replacement parts and products are warranted
for the remaining portion of the original product’s warranty or ninety (90) days, whichever is longer. All
replaced parts and products are the property of SAMSUNG and you must return them to SAMSUNG.
Untitled-1 76Untitled-1 76 2025-03-24 11:00:222025-03-24 11:00:22
English 77
This limited warranty covers manufacturing defects in materials or workmanship encountered in normal
household, noncommercial use of this product and shall not cover the following: damage that occurs
in shipment, delivery, installation, and uses for which this product was not intended; damage caused by
unauthorized modification or alteration of the product; product where the original factory serial numbers
have been removed, defaced, changed in any way, or cannot be readily determined; cosmetic damage
including scratches, dents, chips, and other damage to the product’s finishes; damage caused by abuse,
misuse, pest infestations, accident, fire, floods, or other acts of nature or God; damage caused by use of
equipment, utilities, services, parts, supplies, accessories, applications, installations, repairs, external
wiring or connectors not supplied or authorized by SAMSUNG; damage caused by incorrect electrical
line current, voltage, fluctuations and surges; damage caused by failure to operate and maintain the
product according to instructions; in-home instruction on how to use your product; and service to correct
installation not in accordance with electrical or plumbing codes or correction of household electrical or
plumbing (i.e., house wiring, fuses, or water inlet hoses). The cost of repair or replacement under these
excluded circumstances shall be the customer’s responsibility.
Visits by an authorized servicer to explain product functions, maintenance or installation are not covered
by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these
issues.
EXCLUSION OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights,
which vary from state to state.
Untitled-1 77Untitled-1 77 2025-03-24 11:00:222025-03-24 11:00:22
LIMITED WARRANTY (U.S.A.)
English78
LIMITATION OF REMEDIES
YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF
THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY. SAMSUNG
SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO TIME AWAY FROM WORK, HOTELS AND/OR RESTAURANT MEALS, REMODELING EXPENSES,
LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives
you specific rights, and you may also have other rights, which vary from state to state.
SAMSUNG does not warrant uninterrupted or error-free operation of the product. No warranty or
guarantee given by any other person, firm, or corporation with respect to this product shall be binding on
SAMSUNG.
To obtain warranty service, please contact SAMSUNG at:
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660
1-800-SAMSUNG (726-7864)
www.samsung.com/us/support
Untitled-1 78Untitled-1 78 2025-03-24 11:00:222025-03-24 11:00:22
English 79
Warranty (CANADA)
SAMSUNG WASHER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
Parts and labor : One (1) year
Washing DIT (Digital Inverter Motor) motor part (Part Only):
• Twenty (20) years
This limited warranty begins on the original date of purchase, and is valid only on products purchased
and used in the Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem
determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized
service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the
warranty period at no charge, subject to availability within the Canada. In-home service is not available in
all areas.
To receive in-home service, product must be unobstructed and accessible to the service agent. If service
is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized
service center.
SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated
herein, with new or reconditioned parts or products if found to be defective during the limited warranty
period specified above. All replaced parts and products become the property of SAMSUNG and must
be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or
ninety (90) days, whichever is longer.This limited warranty covers manufacturing defects in materials
and workmanship encountered in normal, noncommercial use of this product and shall not apply to
the following: damage that occurs in shipment; delivery and installation; applications and uses for
which this product was not intended; altered product or serial numbers; cosmetic damage or exterior
finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs,
external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result
in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and
failure to follow operating instructions, maintenance and environmental instructions that are covered
and prescribed in the instruction book; product removal and reinstallation; problems caused by pest
infestations. This limited warranty does not cover problems resulting from incorrect electric current,
voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing
installation errors. SAMSUNG does not warranty uninterrupted or error-free operation of the product.
EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS OR
IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE.
Untitled-1 79Untitled-1 79 2025-03-24 11:00:222025-03-24 11:00:22
Warranty (CANADA)
English80
NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS
PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE
OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO
PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF
THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND
STATES YOUR EXCLUSIVE REMEDY.
Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or
limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to
you.
This warranty gives you specific rights, and you may also have other rights, which vary from province to
province.
To obtain warranty service, please contact SAMSUNG at:
Samsung Electronics Canada Inc.
2050 Derry Road West,
Mississauga, Ontario L5N 0B9 Canada
1-800-SAMSUNG (726-7864)
www.samsung.com/ca/support (English)
www.samsung.com/ca_fr/support (French)
FAX : 1-866-436-4617
Visits by a Service Engineer to explain functions, maintenance, or installation are not covered by
warranty.
Please contact your Samsung call agent for help with any of these issues.
Untitled-1 80Untitled-1 80 2025-03-24 11:00:222025-03-24 11:00:22
Memo
Untitled-1 81Untitled-1 81 2025-03-24 11:00:222025-03-24 11:00:22
Memo
Untitled-1 82Untitled-1 82 2025-03-24 11:00:222025-03-24 11:00:22
Memo
Untitled-1 83Untitled-1 83 2025-03-24 11:00:222025-03-24 11:00:22
Scan this with your smartphone
QUESTIONS OR COMMENTS?
COUNTRY CALL OR VISIT US ONLINE AT
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support
CANADA 1-800-Samsung (726-7864)
www.samsung.com/ca/support (English)
www.samsung.com/ca_fr/support (French)
DC68-000000-00
Untitled-1 84Untitled-1 84 2025-03-24 11:00:232025-03-24 11:00:23
