Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
NOTE:
This manual should not be used to guide your purchasing decision. Your product, and the contents inside its carton, may vary
from what is listed in this manual. This manual may also be subject to updates or changes. Updated manuals are available
through our website at www.lifespanfitness.com.au
V-Fold Treadmill
with Smart Stride
USER MANUAL
Find the
Digital Manual
Online
2
TABLE OF
CONTENTS
I. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
II. Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
III. Product and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
IV. Function Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
V. Set-Up Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
VI. KS Fit App Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VII. Learn to Use the Treadmill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
VIII. Safety Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
IX. Maintenance and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
X. Replacement and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
XI. FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
XII. Exercise Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
XIII. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
| TABLE OF CONTENTS
3IMPORTANT SAFETY INSTRUCTIONS |
I. IMPORTANT SAFETY
INSTRUCTIONS
DANGER
To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet
immediately after using and before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use,
and before putting on or taking off parts.
2. Close supervision is necessary when this appliance is used by, or near children, invalids, or disabled
persons.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not
recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the appliance to a service center for
examination and repair.
5. Do not carry this appliance by the supply cord or use the cord as a handle.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
10. To disconnect, turn all controls to the off position, then remove the plug from the outlet.
11. To prevent the motor from overheating, we recommend up to 2 hours of use and 1 hour of rest before
restarting your workout.
The appliance is intended for residential use.
4 | IMPORTANT SAFETY INSTRUCTIONS
WARNING
1. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
2. Correct Disposal of this product. This marking indicated that this products shall not be disposed
with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your device, please use the return collection systems or
contact the retailer where the product was purchased. They can take this product for environmental
safe recycling.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
WARNING: Keep young children away from this machine at all times. Contact with the moving
surface may result in severe friction burns.
5WELCOME
II. WELCOME
Thank you for choosing Lifespan Fitness V-Fold Treadmill with Smart Stride, and hereinafter referred
to as "Treadmill". The exquisite, simple, and innovative design afford quality and enjoyable workouts
at home. This Treadmill is designed for residential use only. Please do not use it for any commercial,
leasing, or public group purpose.
Reference Index Parameter
Applicable Age 14-60 years old
Speed Range Walking Mode: 0.5km - 6km/h (0.5 - 3.7mi/h)
Running Mode: 0.5 - 12km/h (0.5 - 7.5mi/h)
Running Area 440 x 1200mm (17" x 47")
Max Load 110kg (240lbs)
Frequency 50/60 Hz
Voltage 220 - 240 V~
Power Input 918 W
Net Weight 36kg (81lbs)
Unfold Size 1452 x 720 x 1032mm (57" x 28" x 40.5")
Folded Size 1000 x 720 x 162mm (39" x 28" x 6")
Working Mode Running Mode/Walking Mode
6 PRODUCT AND ACCESSORIES
III. PRODUCT AND ACCESSORIES
Please check if the items inside the packaging are complete and intact. In case of any item missing or
broken, please contact the seller.
Treadmill
ACCESSORIES
Power Cord Remote
Control
Remote Control
Lanyard
Hex L
Shaped Wrench
Safe Lock Silicon Oil User Manual
7
IV. FUNCTION DIAGRAM
FUNCTION DIAGRAM |
When handles are horizontal, the treadmill will be on Walking Mode. The maximum speed in this mode
is 6km/h. In this mode, manual (M) and automatic (A) modes can be used. It has a speed limit of 3km/h
when the treadmill is used for the first time. Unlocking the speed limit of 6km/h can be done in three
ways: Finishing beginner guidance on the KS Fit App, walking on the treadmill for 1km, setting the speed
limit on the "KS Fit" APP.
Ensure the handlebars are tightened on the side when placed horizontally.
Mode Button
1. WALKING MODE
Display
Panel
Power Switch
Wheel
Folding
Hinge
Walking
Belt
Power
Outlet
8 | FUNCTION DIAGRAM
When handrail is vertical, the treadmill will be on Running Mode. The maximum speed in this mode
is 12km/h. In this mode, manual (M) mode can be used. For safety reasons, running mode does not
support automatic (A) mode.
Ensure the handlebars are tightened on the side when placed vertically
2. RUNNING MODE
Safety Lock
Socket
Foot Rail
Walking
Belt
Adjustment
Hold
Mobile
Phone Slot
Handrail
Quick
Dismounting
Device
Handrail
Handrail
Locking
Device
9
3. DISPLAY PANEL FUNCTION
Time
FUNCTION DIAGRAM |
Distance Speed Steps Calories
*Step and Calorie data can be displayed
on the panel after being set in the APP.
Touch Key-press
Standby
Mode
Manual
Mode
Automatic
Mode
Indicator Light
Fault Caution Light
Connection Caution Light
4. Remote Control
Increases Speed
Decreases Speed
Mode
Front
Lanyard
Hole
Function
Back
Battery Cover
10 | SET-UP GUIDE
V. SET-UP GUIDE
1. When moving treadmill, make sure that all
the locking devices on the handrail are
locked and fixed. Put the treadmill on a
flat and firm surface. Avoid soft or thick
carpets.
2. Loosen the handrail locking device, lift the
handrail to a vertical position, tighten the
locking devices on both sides of the handrail.
3. Unfold the treadmill, adjust the walking
belt to the center position, slowly unfold it
and press it down to make it completely
flat, or rotate the bottom foot cushion for
leveling.
4. Loosen the handrail quick mounting device,
adjust it to the handrail scale mark, and then
lock the handrail quick mounting device.
11SET-UP GUIDE |
5. Install the emergency stop switch. Connect
the power supply and turn on the power
switch.
6. Download "KS Fit" APP from the Apple Store or
Google Play Store and complete installation.
7a. When Treadmill is turned on, you should see a
small red light flashing, this means your
treadmill is ready for connection.
7b. Open the Ks Fit app and select the "Add
Manually" option, which will open the screen
with all different options of treadmills.
7c. Select the R2 treadmill option, it should be at
the bottom left corner, then the treadmill
should show up on the lower portion of the
screen.
12
VI. KS FIT APP INSTRUCTIONS
NOTE: App views may differ for Android or iOS users and may change in layout from App updates.
| KS FIT APP INSTRUCTIONS
Screen View
Screen View Motion
Main screen to choose your
device to connect to.
Mine
Shows your previous workout data and user settings.
Adding Device
Add Manually Choose the model (R2) that matches your treadmill.
You should see a device model to choose from.
NOTE: the last four digits are always going to be different.
13KS FIT APP INSTRUCTIONS |
Novice Guide
Use the Novice Guide to instruct you on
how to use the app and the machine.
Manual Mode
Click Go for Manual Mode. Click to stop or start
workout.
Click Speed adjustment to
change speed. You can select
the digit, swipe to the speed
press the – or + buttons.
14
Quick Speed Buttons
| KS FIT APP INSTRUCTIONS
Automatic Mode
You can edit the quick speed
buttons by clicking on the
setting sign.
Press the to start Automatic mode.
The belt will sense your walking pace and
increase or decrease.
15KS FIT APP INSTRUCTIONS |
Device Settings
Belt Calibration
Click on the Settings symbol on the top
right corner for more settings.
You can change the default speeds for
running and walking, start up speed and
sensitivity setting for Automatic Mode.
There is also a Child Lock to prevent
unauthorised use.
If belt is shifted it will need to be recentred. Click on Belt Calibration and follow steps to adjust it to centre.
16 | LEARN TO USE THE TREADMILL
VII. LEARN TO USE THE TREADMILL
1. MODE DESCRIPTION
Standby Mode
The standby mode
indicator lights up, the
motor and sensor are
stopped.
Manual Mode
The manual mode
indicator lights up, the
speed can be controlled
with the remote control
or the APP.
Automatic Mode
The automatic mode
indicator lights up,
the speed is controlled
automatically via an
intelligent algorithm.
2. STANDBY MODE CONTROL DESCRIPTION
Standby Mode
Under standby mode, users can press the
mode button on the remote control briefly to
wake up the treadmill and switch to the default
manual mode.
Users can also touch the icon on the display
panel to wake up the treadmill.
When the treadmill is not in use, press the
mode button on the remote control or touch
the standby icon on the display panel to switch
to the standby mode.
Remote Control Diagram
Short press: Mode switch
Long press: Switch to standy mode
(non-operational state)
17LEARN TO USE THE TREADMILL |
3. MANUAL MODE CONTROL DESCRIPTION (PRIMARY MODE)
Manual Mode
In this mode, users can use the remote control
to control the treadmill. Beginners are advised
to use the manual mode first, and then use the
automatic mode once skills have increased.
Mode Button
Short press: Switches mode
Long press: Switch to standy mode
(not in use)
Speed Increase Button
Short press: Speed increase by
0.5km/h (0.5mi/h)
Function Button
Short press: Starts or stops the
treadmill
Speed Decrease Button
Short press: Speed decrease by
0.5km/h (0.5mi/h)
5. AUTOMATIC CONTROL MODE DESCRIPTION
Automatic
This mode is difficult to control and can be
used completely without the remote control. It
is advised to use this mode only after having
gain experience.
Use the remote control to start and stop the
treadmill, and the switch mode button is
effective under this mode.
NOTE: The automatic control mode is only
available under walking mode.
The treadmill will
speed up by standing
on this area under
automatic.
The treadmill will
slow down by
standing on this area
under automatic.
18 | LEARN TO USE THE TREADMILL
If the remote control does not respond or you have replaced the remote control, you need to pair it again.
Pairing method: Restart the treadmill and press and hold the Mode button on the remote control AT THE
SAME TIME for 5 seconds.
6. REMOTE CONTROL PAIRING INSTRUCTIONS
Not connected to APP: Will flicker
Connected to APP: Off
7. CONNECTION CAUTION LIGHT
E01: Software overcurrent
E02: Hardware overcurrent
E03: IPM Module Overheating
E04: Low-voltage Protection
E05: High-voltage Protection
E06: Motor phase loss protection
E07: Motor block rotation protection
8. FAULT CAUTION LIGHT
E08: Sensor fault
E09: Motor unable to start
E12: Motor overcurrent protection
E13: Overloading protection
E14: Hall signal loss
E15: Communication fault
19SAFETY INSTRUCTION |
VIII. SAFETY INSTRUCTION
The distance between the treadmill should
be superior to 2000mm. You can hold the
handrail tightly to support your body and
jump away from the treadmill.
The distance in each side of the treadmill should
be superior to 500mm.
Please wear sports shoes and clothes
and exercise moderately when using the
treadmill. If you feel uncomfortable during
running, please stop immediately and
consult a doctor. Otherwise, you may risk
injuries.
Test the safe lock before using the treadmill.
Please clip the end of the safe lock on your clothes
when running on the treadmill. If there is an
unexpected situation, pull off the safe lock to stop
the treadmill immediately.
Actuator release force: 7N
Clip release force: 18N
20| SAFETY INSTRUCTION
DO NOT operate the treadmill in damp or wet
locations. DO NOT use on uneven floor.
If floor is uneven, turn the round floor cushion
under the deck to level the ground. Ensure the
cushions touch the ground.
Please unplug the power cord when not in use.
DO NOT step on the head of the treadmill. DO NOT bring pets when using the treadmill.
21SAFETY INSTRUCTION |
DO NOT use the treadmill backwards or
sideways.
Elderly people, children, and pregnant women
should use caution when using the treadmill.
Watch your hands. Take care of your belongings.
22| SAFETY INSTRUCTION
DO NOT fold before power off. Keep treadmill upright and put it in a space with
supporting points on both sides. Please keep away
from children.
DO NOT get on and off when the treadmill
operating.
PLEASE NOTE:
The treadmill will automatically stop operating when there is no one walking on it.
23MAINTENANCE AND ADJUSTMENTS |
IX. MAINTENANCE AND
ADJUSTMENTS
• Disconnect all sources of power before cleaning the treadmill.
• Add a small quantity of mild cleaner to a 100% cotton cloth. Do not spray the cleaner directly on the
walking belt or use acidic and corrosive cleaner.
• Do not wipe under the walking belt.
• After a period of exercise, dust and stains may appear on the rear floor. This is normal and can be
simply wiped.
1. Clean the treadmill
• Simultaneously press and hold both Mode Button and Speed Increase Button on the remote control
for over 3 seconds until device start.
• Front panel will show "CALI" and keep running with speed 3km/h (2mi/h).
• Walking belt goes to the left: Turn the left adjusting hole screw clockwise by 1/4 turn.
• Walking belt goes to the right: Turn the right adjusting hole screw clockwise by 1/4 turn.
• Walking belt is slipping: Turn the left and right adjusting screws clockwise for 1/2 turn at the
2. Walking Belt Slipping and Correction
24
same time.
• After each adjustment, the treadmill needs to run for 1-2 minutes to verify the adjustments.
Please adjust again if necessary.
• Press the function key to stop treadmill.
CAUTION: DO NOT OVERTIGHTEN THE BELT. PLEASE MAINTAIN ORIGINAL FACTORY BELT TENSION.
EXCESSIVE BELT TENSION WILL CAUSE DAMAGE TO MOTOR.
• Power off the treadmill and unplug the power cord.
• Lift the edge of the walking belt and smear the inner surface with silicone oil.
• Start the treadmill to run at a speed of 3km/h (2mi/h) for 10-20 seconds.
• 5-10ml of silicone oil is required for each lubrication. Excessive silicone oil may cause slipping and
affect normal use.
• Lubricate the walking belt every three months.
3. Walking Belt Lubrication
| SAFETY INSTRUCTION
25REPLACEMENT AND DISPOSAL |
X. REPLACEMENT AND DISPOSAL
The battery contained in this appliance must be removed for disposal.
When replacing the battery, use only original battery, available from our online parts
shop.
The battery compartment is located on the back of the appliance. Open the
compartment by removing the screw in the cover using a suitable screwdriver, and
the press the lower end of the locking catch on the connectors. In that way, both
sides of the connection can be separated by pulling them apart.
When inserting a new battery, push together the two connectors and ensure that the
catch looks over the stop.
Never dispose of old battery in domestic garbage, but only through the proper public
collection points. This also applies to the battery of defective appliances.
Devices marked with this symbol must be disposed of separately from your
household waste, as they contain valuable materials that can be recycled. Proper
disposal protects the environment and human health. Your local authority or
retailer can provide information on the matter.
26
XI. FAQ
Q1: Why is it showing SAFE?
A: The emergency stop switch is not connected.
Q2: Why the running mode will not start?
A: Check that the power supply of the treadmill is connected, the switch is turned on, and the
emergency stop siwtch is plugged in. Also, check that the locking devices on both sides of the
handrail have been tightened and the treadmill is showing RUN. Otherwise, the running mode will
not work due to the safety setting.
Q3: Why can't I use the Automatic mode?
A: Automatic mode can be used for Walking mode only. Please try to put the handrail down and then
enable automatic mode.
Q4: Why is the maximum speed is only 3km/h?
A: The maximum speed is 3km/h when you are using the walking mode for the first time. The maximum
speed will increase to 6km/h (3,7mi/h) after you accessed the novice guide on the App. You may also
unlock the speed limit by walking or running on the treadmill for 1km.
Q5: Why the remote is not working?
A: Check that the remote control has a battery and try to pair it again. Restart the treadmill and press
and hold the Mode button in the remote control AT THE SAME TIME for 5 seconds. A beep will
indicate a successful pairing. NOTE: During the pairing, the remote control should be close to the
LED display on the treadmill. (See 04. Learn to Use the Treadmill).
Q6: How to adjust belt to center before use?
A: Simultaneously press and hold both Mode Button and Speed Increase Button on the remote control
for over 3 seconds until device start.
Front panel will show "CALI" and keep running with speed 3km/h (2mi/h).
Walking belt goes to the left: Turn the left adjusting hole screw clockwise by 1/4 turn.
Walking belt goes to the right: turn the right adjusting hole screw clockwise by 1/4 turn.
Walking belt is slipping: Turn the left and right adjusting screws clockwise for 1/2 turn at the
same time.
After each adjustment, the treadmill needs to run for 1-2 minutes to verify the adjustments.
Please adjust again if necessary.
Press the function key to stop treadmill.
CAUTION: DO NOT OVERTIGHTEN THE BELT. PLEASE MAINTAIN ORIGINAL FACTORY BELT TENSION.
EXCESSIVE BELT TENSION WILL CAUSE DAMAGE TO MOTOR.
| FAQ
27
Speed increase
Speed decrease
Mode
Lanyard Hole
Function
FAQ |
28
XII. EXERCISE GUIDE
PLEASE NOTE:
Before beginning any exercise program, consult your physician. This is important especially if you are
over the age of 45 or individuals with pre-existing health problems.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in
determining heart rate trends in general.
Exercising is great way to control your weight, improving your fitness and reduce the effect of aging and
stress. The key to success is to make exercise a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering oxygen via your blood to
your muscles is an important factor to your fitness. Your muscles use this oxygen to provide enough
energy for daily activity. This is called aerobic activity. When you are fit, your heart will not have to work
so hard. It will pump a lot fewer times per minute, reducing the wear and tear of your heart.
So as you can see, the fitter you are, the healthier and greater you will feel.
WARM UP
Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up
increases your body temperature, heart rate and circulation in preparation for exercise. Ease into your
exercise.
| EXERCISE GUIDE
29
COOL DOWN
Finish each workout with a light jog or walk for at least 1 minute. Then complete 5 to 10 minutes of
stretching to cool down. This will increase the flexibility of your muscles and will help prevent post-
exercise problems.
WORKOUT GUIDELINES
This is how your pulse should behave during general fitness exercise. Remember to warm up and
cool down for a few minutes.
TARGET ZONE
MAXIMUM
85%
70%
COOL DOWN
AGE
HEART RATE
200
180
160
140
120
100
80
20 25 30 35 40 45 50 55 60 65 70 75
The most important factor here is the amount of effort you put in. The harder and longer you work, the
more calories you will burn.
TRAINING ZONE EXERCISE
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your
intensity for maximum performance. Breathe regularly and deeply as you exercise.
EXERCISE GUIDE |
30
XIII. WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come
with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss
or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure. Full details of your consumer rights may be found at
www.consumerlaw.gov.au.
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
WARRANTY AND SUPPORT
Any claim against this warranty must be made through your original place of purchase.
Proof of purchase is required before a warranty claim may be processed.
If you have purchased this product from the Official Lifespan Fitness website, please visit
https://lifespanfitness.com.au/warranty-form
For support outside of warranty, if you wish to purchase replacement parts or request a repair or
service, please visit https://lifespanfitness.com.au/warranty-form and fill in our Repair/Service
Request Form or Parts Purchase Form.
Scan this QR code with your device to go to lifespanfitness.com.au/warranty-form
| WARRANTY
WWW.LIFESPANFITNESS.COM.AU
