DISHWASHER DOOR INSTALLATION
1. Remove the laser film from dishwasher door.
2. Line the dishwasher handle up with the 2 pre-drilled
holes.
3. Use the screws that come with the dishwasher handle
to attach to the panel.
4. The head of each screw should recess into the wood
upon tightening.
5. Line up the pre-drilled holes on the door with the 6
open screw slots on the dishwasher.
6. Attach with the 6 screws provided with the dishwasher.
7. Screw in and tighten all 6 screws on the door panel.
8. Once all 6 screws are in place, go back and hand
tighten to make sure that the door is flush against the
dishwasher.
Install your dishwasher door in 7 simple steps.
