English
Before using the TV, please read this guide thoroughly and
retain it for future reference.
43Q6QAU
50Q6QAU
55Q6QAU
65Q6QAU
75Q6QAU
85Q6QAU
1415235 ES-A24460D-1
Contents
Figures and illustrations in this manual are provided for reference only and may
differ from actual product appearance.
Parts of the software function changes with the system upgrade.
If you encountered difculty when setting up your TV, we suggest you refer to the
troubleshooting tips in the User Manual or the E-Manual.
Installation ......................................................................................................................1
TV Front and Rear .......................................................................................................... 5
Connection .....................................................................................................................7
Remote Control ..............................................................................................................9
Specifications ............................................................................................................... 11
Other Information..........................................................................................................12
Accessories List
The following accessories are included with TV:
The accessories may be different from the list above due to different models, countries/regions,
please refer to the actual accessory bag.
This TV is equipped with this quick setup guide and embedded E-Manual (
Settings >
Support > E-Manual)
.
E-Manual support functions
Search
Try Now
QR Code
Find the help you are looking for.
Go directly to the function page and try it.
Scan to open the E-Manual on your mobile device.
Find what you want
Quick Setup Guide × 1
Remote Control × 1 AAA Battery × 2
Power Cord × 1 Base Stand × 2 Screw × 6 (85")
Nut × 2 (for installing the wall mount bracket)(50"/55"/65")
Screw × 4 (43"/50"/55"/65"/75")
A
Declaration
Any content and service accessed through this device, while only intended for individual non-
commercial use, shall be the property of the applicable third party and subject to protection by
regulations and laws on copyright, patent, trademark and other intellectual property rights. No
part of such content and service may be modified, duplicated, published, uploaded, distributed,
translated, marketed, or used to make and distribute products derived from it without the prior
permission of the content owner or service provider.
You acknowledge and agree explicitly that you will solely bear the risk associated with the use of
this device, and further you will solely bear any risk related to satisfactory quality, performance
and accuracy for any content and service accessed through this device. To the maximum extent
permitted by applicable law, this device and any third party’s content and service is provided as it
is without any guarantee, express or implied.
Manufacturer hereby declare explicitly that Manufacturer shall not be held liable for any guarantee
and conditions, express or implied, related to this device and any content and service, including
but not limited to warranty on marketability, satisfactory quality, fitness for a particular purpose,
accuracy, quiet use and non-violation of any third party’s rights; to the maximum extent permitted
by applicable law, Manufacturer gives no guarantee on the accuracy, validity, timeliness,
legitimacy and completeness of any content or service provided through this device, or the
fitness of such device, content or service for your particular requirement, or the protection from
interruption and error during operation of such device, content or service; to the maximum extent
permitted by applicable law, in any case, including fault or neglect, Manufacturer shall not be
held liable for legal actions or indemnity obligation arising from any consequence as a result of or
related to any information loaded in this device or use of such device, content or service by you or
any third party.
Any content and service provided as it is together with this device shall be the property of the
applicable third party, therefore Manufacturer gives no declaration or warranty on modification,
suspension, cancellation, termination or abortion thereof, and shall not be held liable for legal
actions or indemnity obligation arising thereof.
Manufacturer reserves the rights to restrict the use or access of certain content or service. As
the content and service are transmitted through third party’s network and transmission facilities,
Manufacturer undertakes no customer service thereof or the obligation for such customer service.
This symbol alerts user about the
presence of a dangerous voltage not
isolated inside the product which can
be sufficiently powerful to constitute a
risk of electrocution.
This symbol alerts user about the
presence of important operating
instructions and maintenance in the
document enclosed in the package.
ATTENTION
Do not open the back cover.
In no case the user is allowed to operate
inside the TV set. Only a qualified
technician is entitled to operate.
RISK OF ELECTRIC
SHOCK
B
Warning Safeguards
Please read the following safeguards for
your TV and retain for future reference.
Always follow all warnings and
instructions marked on the television.
1. A note about safety and operating
instructions
Read and follow all safety and operating
instructions, and retain them safely for
future reference.
2. Heed Warnings
Adhere to all warnings on the appliance
and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before
cleaning. Do not use liquid, abrasive,
or aerosol cleaners. Cleaners can
permanently damage the cabinet and
screen. Use a lightly dampened cloth for
cleaning.
4. Wall Mount Bracket
Wall mount bracket is only available for
some models. If wall mount bracket is not
supplied with this product, you can buy it
at the local market.
Please refer to the Installing the Wall
Mount Bracket page for dimensions.
5. Water and Moisture
Avoid dripping or splashing of liquids onto
the product. Objects filled with liquids,
such as vases, should not be placed
above the product.
6. Setting
Do not place this TV on an unstable cart,
stand or table. Placing the TV on an
unstable base can cause the TV to fall,
resulting in serious personal injuries as
well as damage to the TV. Use only a cart,
stand, bracket or table recommended by
Stability Hazard
A television set may fall, causing serious
personal injury or death. Many injuries,
particularly to children, can be avoided
by taking simple precautions such as:
ALWAYS use cabinets or stands or
mounting methods recommended by
the manufacturer of the television set.
ALWAYS use furniture that can safely
support the television set.
ALWAYS ensure the television set
is not overhanging the edge of the
supporting furniture.
ALWAYS educate children about the
dangers of climbing on furniture to
reach the television set or its controls.
ALWAYS route cords and cables
connected to your television so they
cannot be tripped over, pulled or
grabbed.
NEVER place a television set in an
unstable location.
NEVER place the television set on
tall furniture (for example, cupboards
or bookcases) without anchoring both
the furniture and television set to a
suitable support.
NEVER place the television set on
cloth or other materials that may be
located between the television set
and supporting furniture.
NEVER place items that might tempt
children to climb, such as toys and
remote controls, on the top of the
television or furniture on which the
television is placed.
If your existing television set is being
retained or relocated, the same
considerations as above should be
applied.
C
the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are
provided for ventilation, to ensure reliable
operation of the TV and to protect it from
overheating. Do not cover the ventilation
openings in the cabinet and never place
the set in a confined space such as built-
in cabinet unless proper ventilation is
provided. Leave a minimum 10cm gap all
around the unit, the rear of the TV should
be 6cm away from the wall.
8. Power Source
This TV should be operated only from
the type of power source indicated on
the marking label. If you are not sure of
the type of power supplied to your home,
consult your appliance dealer or local
power company.
9. Power-Cord Protection
Power- supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords
at plug, wall outlets, and the point where
they exit from the TV. MAIN plug on the
power cord is used as the disconnect
device, the disconnect device and socket-
outlet shall be easily accessible.
10. Lightning
For added protection for this TV during
a lightning storm, or when it is left
unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system.
This will prevent damage to the TV due to
lightning or power-line surge.
11. Power Lines
An outside antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power
circuits, or where it can fall into such
power lines or circuits. Where installing
an outside antenna system, extreme care
should be taken to keep from touching
such power lines or circuits as contact
with them might be fatal.
12. Overloading
Do not overload wall outlets and
extension cords as this can result in a risk
of fire or electric shock.
13. Object and Liquid Entry
Never push objects of any kind into this
TV through openings as they may touch
dangerous voltage points or short-out
parts that could result in fire or electric
shock. Never spill liquid of any kind on or
into the TV.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is
connected to the TV, be sure the antenna
or cable system is grounded so as to
provide some protection against voltage
surges and built-up static charges.
15. Servicing
Do not attempt to service this TV yourself
as opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified
service personnel.
16. Damage Requiring Service
Unplug the TV from the wall outlet
and refer servicing to qualified service
personnel under the following conditions:
(a) When the power - supply cord or plug
is damaged.
(b) If liquid has been spilled, or objects
have fallen into the TV.
(c) If the TV has been exposed to rain or
water.
(d) If the TV does not operate normally by
following the operating instructions.
D
Adjust only those controls that are
covered by the operating instructions
as an improper adjustment of other
controls may result in damage and
will often require extensive work by a
qualified technician to restore the TV
to its normal operation.
(e) If the TV has been dropped or the
cabinet has been damaged.
(f) When the TV exhibits a distinct
change in performance - this indicates
a need for service.
17. Replacement Parts
When replacement parts are required,
be sure the service technician has
used replacement parts specified by
the manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repair
to the TV, ask the service technician to
perform safety checks to determine that
the TV is in safe operating condition.
19. Heat
The product should be situated away
from heat sources such as radiators,
heat registers, stoves, or other products
(including amplifiers) that produce heat.
20. Fire
The product should be situated away
from naked flame sources such as lighted
candle.
21. Off-gassing
The TV smells of plastic is normal and
will dissipate over time.
To fully disconnect the TV, remove
power plug from wall socket. Be
sure to have the wall socket and
power plug readily accessible.
Do not mix and use new batteries
with old batteries, or batteries with
different types. Do not expose
batteries to heat such as direct
sunlight or fire. Make sure the
batteries' positive and negative
ends are facing the correct
direction.
The device should not be exposed
to dripping and spraying and it
cannot be placed under objects
filled with liquids.
Class II product: This symbol
indicates that it does not require
a safety connection of protective
earthing (ground).
AC voltage: This symbol indicates
that the rated voltage marked
with the symbol is AC voltage.
1
Follow the illustrations and textual instructions below to complete the installation steps:
Installation
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Installing the stand
1. Carefully place your TV face-up on a flat surface to prevent damage to the TV.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws(43"/50"/55"/65"/75") / 6
screws(85") in the accessory bag tightly.
75"
Base Stand
Base Stand
Screws: M5×12
Screws: M5×12
For 43"/50"/55"/65"/75"
43"/50"/55"/65"
Base Stand
Base Stand
Screws:
M4×16(43")
M5×12(50"/55"/65")
Screws:
M4×16(43")
M5×12(50"/55"/65")
2
Installing the wall mount bracket
Before you follow the third-party manufacturer instructions to attach the wall mount, be
sure to do the following things:
1.
Place the TV on a clean, safe and cushioned surface.
2.
Remove the TV stands if you have already attached them.
3. Take the nuts out of the accessory bag and tighten the nuts into the holes of the
back cover (See Fig. 1).(only for 50"/55"/65")
4.
Place spacers (not included) between the TV and the bracket (See Fig. 2).
Screw
(not included)
Bracket
(not included)
Spacer
(not included)
Fig.2
Fig. 1
Nuts: (M6×12) ×2
For 85"
Note:
If your table is long enough to place the TV on, then insert the base stands into the
screw holes ‘A’ that are shown in the illustration. If your table is NOT long enough, then
insert the base stand into the screw holes ‘B’ that are shown in the illustration. Note that
these two installation methods cannot be mixed.
Screws:
M5×16
A
A
Screws:
M5×16
B
B
Base Stand
Screws:
M5×16
Screws:
M5×16
Base Stand
3
NOTE
The diameter and length of the screws differ depending on the wall mount bracket model.
Wall mount bracket is optional, your device may not have wall mount bracket, please
refer to the actual accessories.
We do not recommend hanging the TV on a slanted wall, and
when wall mounting make sure your television remains parallel to
the wall and does not lean forward.
TV
screen
Vertical
surface
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or personal injury.
Be sure to use the wall mount brackets with four fixed points.
Place spacers between the TV and bracket.
Standard dimensions are shown below.
Wall mount
hole pattern
(mm)
200 × 300 (43")
200 × 400 (50"/55")
300 × 400 (65")
400 × 300 (75")
600 × 400 (85")
Wall mount
screw size
M6 (43"/50"/55"/65"/75")
M8 (85")
Number of wall
mount screw
4
Wall Mount
Bracket
Wall Mount Screw
Wall Mount Spacer
Rear cover
of the TV
9.5 - 11.5 mm (75"/85")
8.0 - 10.0 mm (43"/50"/55"/65")
4
Installing the P-Clip
Please place the TV on a horizontally stable surface, and then use P-Clip to connect the TV
and the wall or pillar. (Marked in the illustration below.)
1.
Fix part of P-Clip to the screw hole on the back of TV set with a M6×12 screw.
2. Select a suitable hole of P-Clip on part and fix it to the wall or pillar with a ST4×25
screw.
Select a suitable
screw hole based on
the actual situation.
Screw:
M6×12
P-Clip
65" 75"
screw hole
For 43"/50"/55"/65"/75"
screw hole
50"/55"
screw hole
43"
screw hole
NOTE
Insecure installation may cause the tilt or falling of the product, and further lead to per-
sonal injuries or product damages. If the method above can not fix the product, please
consult the manufacturers.
P-clip and corresponding screws may not included with TV set, please purchase them by
yourself if necessary.
For 85"
1. Fix the larger side of P-Clip to the screw hole on the back of TV set with a M8×30 screw.
2. Fix the other side of P-Clip to the wall or pillar.
screw hole
P-Clip
Screw
Select a suitable screw hole
based on the actual situation.
5
TV Front and Rear
Power indicator/
Power button (Standby/Source)
Built-in microphone control button
MIC
Voice Indicator
Item Description
Power indicator
The light is white in standby mode.
Power button
(Standby/Source)
Press the button to turn the TV on. Press it again to bring
up the control menu and move the focus between different
inputs. Long press the button to make a selection.
Built-in microphone con-
trol button
Switch the built-in microphone control button to on
to use the
built-in microphone.
After the Alexa or VIDAA Voice setup has been completed
and Hands-Free mode is turned on, you can use Hands-Free
Wake-up, just say "Alexa" or "Hey VIDAA" to call up the voice
assistant.
NOTE
Check the jacks for position and type before making any connections. Loose
connections can result in image or colour problems. Make sure that all connections are
tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual
of your A/V device for compatibility and connections procedure.
Before connecting external equipment, remove the mains plug from the wall socket.
Otherwise, it may cause electric shock.
Powering on the TV requires several seconds to load programmes. Do not rapidly turn
the TV off as it may cause the TV work abnormally.
The Picture is Only for Reference.
Before using Hands-Free Wake-up, connect your TV to the network. The Hands-Free
Wake-up and some of its features are available on limited country/region/language.
6
AC INPUT
65"/75"/85"
43"/50"/55"
AC INPUT
43"/50"/55" 65"/75"/85"
USB×2
DC 5V 0.5A(MAX)×2
HDMI 1
4K@60Hz
HEADPHONE
HDMI 2
4K@60Hz
HDMI 3(eARC)
4K@60Hz
DIGITAL
AUDIO OUTLAN
ANT
7
ANT Connect an outdoor VHF/UHF antenna or cable.
HDMI Connect an HDMI cable from an external equipment.
HDMI
(eARC)
Connect an HDMI cable from an external digital audio system.
Please note that it works only when the TV is connected to the
audio receiver that supports the eARC function.
AV IN
Connect a composite video cable and left-right audio cables
from an external AV device.
USB
Connect a USB device for browsing photos, listening to music
and watching movies.
DIGITAL
AUDIO OUT
Connect an optical cable from an external digital audio system.
LAN Connect an Ethernet cable to access a network or the Internet.
HEADPHONE
Connect headphone for audio out of the TV.
NOTE
When connecting a hard disk or a USB hub, always connect
the mains adapter of the connected device to the power
supply. If a USB 1.1 or USB2.0 device requires more than
500mA or 5V, the USB device may not be supported. Max
supported current for USB 3.0 device is 1A
(only for some
models). Exceeding the max supported current may result in
damage or data loss.
Certain digital cameras may not be compatible with the TV.
ATTENTION
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Terminals
Connection
NOTE
•
The location and names of the terminals on the TV may vary according to TV model,
and not all terminals available on all models.
8
Wired setup
Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.
·
We recommend you to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don’t have to enter them manually. Most home networks already have DHCP.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Wireless setup
Connect your TV to your wireless network, you need a wireless router or modem.
See the illustration below.
·
The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac
communication protocols.
Wireless router with DHCP
LAN Cable
Wireless LAN Adapter
built-in TV set
NOTE
You must use the built-in Wireless LAN Adapter to use a wireless network because
the set doesn’t support external USB network adapter.
If the wireless router supports DHCP, your TV can connect more easily to the
wireless network.
If you apply a security system which is not listed below, it will not work with the TV.
Security system : WPA, WEP, WPA2.
In order to guarantee smooth network, the distance between router and TV should be
less than 10 meters.
Network
9
Remote Control
Buttons of remote control
NOTE
The included remote control will vary depending on model, country/region. Check
information according to the actual remote control in the accessory bag.
Power on/Standby Select input sources
Quick access buttons to
apps
Special function buttons
Quick setup
Playpad keys
Navigation buttons
(Up/Down/Left/Right)
OK / Display the on-screen
keyboard
Under the Menu or App,
return to the previous
place
Exit the menu or exit
the application
Display the Home screen
Volume (up/down)
Channel (up/down)
Activate the microphone
Display subtitles in the
Live TV
Mute and restore sound
Display the current program
information
Select a channel or input
numbers
Display the Electronic
Program Guide (DTV mode)
(Long press to be used as
CH.LIST:
Display the Channel
List on the screen
)
10
Installing Batteries in the Remote Control
Pairing the Remote Control (only for Bluetooth remote control)
Pair the remote to the TV after you power it on. Keep the remote control within 3
metres from the TV. Press any button (except power and mic button) to pair.
NOTE
In special cases, press and hold [
] button to pair.
If an unknown error occurred with the remote, then it could have been caused by
interference. Try to remove what's causing the interference and pair it again.
If an unknown error occurred in the remote control while the battery power is normal,
you can take out the batteries, press any key for 1~2 seconds, and insert them
back. Then the remote control will work normally.
The remote cannot be paired to the TV while the TV is in standby mode.
1.
Slide the back cover to open the battery compartment of the remote control.
2.
Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the
batteries with the (+) and ( - ) ends indicated in the battery compartment.
3.
Close the battery compartment with the cover.
NOTE
Product image is only for reference, actual product may vary in appearance.
Dispose of your batteries in a designated disposal area.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into the
battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
Leaving a battery in an extremely high temperature surrounding environment that
can result in an explosion or the leakage of flammable liquid or gas.
Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
Risk of fire or explosion if the battery is replaced by an incorrect type.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result in an explosion or
the leakage of flammable liquid or gas.
Remote Control Operation Range
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.
It should be packed and handed over to authorised re-cycler.
1. The remote control can work at a distance of up to 8
meters in
front of the TV set.
2. The remote control angle: taking the remote sensor as
an apex, 6 meters away, its controlled horizontal angle is
within ±30°, while the vertical angle is within ±15°.
3. The operating distance may vary depending on the
brightness of the room.
6m
8m
6m
6m
8m
6m
30° 30°
15°
15°
11
Features, appearance and specifications are subject to change without notice.
Specifications
Item
43" 50" 55"
Dimension
(mm)
Without Stand
(W × H × D)
963 × 564 × 74 1119 × 654 × 80 1233 × 716 × 80
With Stand
(W × H × D)
963 × 614 × 238 1119 × 685 × 298 1233 × 751 × 298
Weight
(kg)
Without Stand
6.8 9.4 10.9
With Stand
6.9 9.5 11.0
Active Screen Size
(Diagonal) (cm)
108 126 139
Screen resolution
3840 × 2160 3840 × 2160 3840 × 2160
Audio power
8W + 8W 10W + 10W 10W + 10W
Item
65" 75" 85"
Dimension
(mm)
Without Stand
(W × H × D)
1453
×
840
×
76 1676
×
966
×
87
1892 × 1092 × 101
With Stand
(W × H × D)
1453
×
876
×
298 1676
×
1004
×
360 1892 × 1134 × 430
Weight
(kg)
Without Stand
15.0 22.2 36.0
With Stand
15.2 22.5
36.5
Active Screen Size
(Diagonal) (cm)
164 189 215
Screen resolution
3840 × 2160 3840 × 2160 3840 × 2160
Audio power
10W + 10W 15W + 15W 15W + 15W
Power consumption
Please refer to the rating label.
Power supply
Please refer to the rating label.
Standby Power
0.5W
Receiving
systems
Analog
PAL-D/K, B/G, I SECAM-D/K, B/G
Digital
DVB-T/T2, DVB-C
Environmental conditions
Temperature: 5°C - 40°C
Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa
HDMI Input
60Hz (640×480, 800×600, 1024×768)
60Hz (480i, 480p, 720p, 1080i, 1080p)
50Hz (576i, 576p, 720p, 1080i, 1080p)
24Hz 25Hz 30Hz 50Hz 60Hz (3840×2160)
NOTE
:
Certain models may not be available for sale in Australia.
12
Other Information
Packaging and electrical goods should be recycled appropriately, and not treated
as household waste. Please dispose of this equipment at your applicable collection
point for the recycling of electrical & electronic equipment waste. By ensuring the
correct disposal of this product, you will help prevent potentially hazardous to the
environment and to human health, which could otherwise be caused by unsuitable
waste handling of this product. The recycling of materials will help conserve natural
resources. Please do not therefore dispose of your old electrical and electronic
equipment with your household waste. For more detailed information about
recycling of this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Disposal of Used Electrical & Electronic Equipment
License
The terms HDMI, HDMI High-Denition Multimedia Interface, HDMI
Trade dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are
registered trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Condential
unpublished works. Copyright © 2012–2024 Dolby Laboratories. All
rights reserved.
FOR DTS PATENTS, SEE HTTP://XPERI.COM/DTS-PATENTS/.
MANUFACTURED UNDER LICENSE FROM DTS, INC. AND ITS AF-
FILIATES. DTS, DTS:X, AND THE DTS:X LOGO ARE REGISTERED
TRADEMARKS OR TRADEMARKS OF DTS, INC. AND ITS AFFILI-
ATES IN THE UNITED STATES AND/OR OTHER COUNTRIES. ©
DTS, INC. AND ITS AFFILIATES. ALL RIGHTS RESERVED.
What is Freeview Plus?
Freeview Plus is a new television service delivered via broadband providing a state of
the art Electronic Program Guide (EPG) and seamless access to catch-up TV across
the free-to-air networks with the simple press of a button.
How does it work?
First ensure the TV is connected to internet and an antenna system. Then when you’re
watching TV, you’ll briey see a prompt at the top left of the screen. Press the ‘Green’
button on your remote to launch Freeview Plus. More information about Freeview Plus
can be found on http://www.freeview.com.au/
