IMPORTANT INSTRUCTIONS
AND OPERATING MANUAL
ESPRESSO MACHINE
Item No.:CM8050
Model NO.: CM5020B-UL
THANK YOU FOR CHOOSING OUR ESPRESSO MACHINE
PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATING!
If you have questions about the product such as missing parts,damaged products,
product assembling and operation etc., please contactus via Amazon Message or
customer service phone:213-4467172 or 661-4358826.
⚠ IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following
basic precautions should always be followed including
the following:
1. Read all instructions.
2. Before using, check that the voltage of wall outlet
corresponds to rated voltage marked on the rating plate.
3. To protect against fire, electric shock and injury to
person, do not immerse cord, plug, in water or other liquid.
4. The appliance must not be immersed.
5. Remove plug from wall outlet before cleaning and when
not in use. Allow appliance cool down completely before
taking off, attaching components or before cleaning.
6. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped or
damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or
electrical or mechanical adjustment.
7. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
8. The use of accessory attachments not recommended
by the appliance manufacturer may result in fire, electric
shock or injury to persons.
9. Place appliance on flat surface or table, do not hang
power cord over the edge of table or counter.
10. Ensure the power cord do not touch hot surface of
appliance.
11. Do not place the coffee machine on hot surface or
beside fire in order to avoid to be damaged.
12. To disconnect, remove plug from wall outlet, always
hold the plug, but never pull the cord.
13. Do not use appliance for other than intended use and
place it in a dry environment.
14. Be careful not to get burned by the steam.
15. The temperature for operating or storing the coffee
machine shall be higher than 0℃.
16. Do not operate the coffee machine at an environment
with high temperature, strong magnetic field and moist air.
17. Do not touch the hot surface of appliance (such as
steam wand, and the steel mesh just boiling). Use handle
or knobs.
18. Do not let the coffee maker operate without water.
19. Connect plug to wall outlet before using and turn any
switch off before plug is removed from wall outlet.
20. This appliance can be used by children aged from 8
years and above if they have been given supervision or
instruction concerning use of the appliance in a safe way
and if they understand the hazards involved. Cleaning and
user maintenance shall not be made by children unless
they are older than 8 and supervised. Keep the appliance
and its cord out of reach of children aged less than 8 years.
21. Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
22. Children shall not play with the appliance.
23. This appliance is intended to be used in household and
similar applications such as:
– staff kitchen areas in shops, offices and other working
environments;
– farm houses;
– by clients in hotels, motels and other residential type
environments;
– bed and breakfast type environments.
24. Save these instructions.
⚠ Warning: pressure
In order to prevent hot steam and hot water from scalding
the body or causing other personal injuries, and to prevent
damage to this product, when the machine brews coffee
or foams, do not remove the water tank or funnel. Before
you remove the funnel to brew another cup of coffee, make
sure that the coffee machine is in standby mode. If you
want to add more water into the water tank, please turn off
the machine by pressing the Power button . When four
indicators are off, the product is turned off. When
extracting coffee, make sure that the funnel is turned to the
specified position to avoid it getting loosen due to pressure
reason during use, which may easily cause human injury.
High temperature
When the machine is working, do not extend your hands
and other body parts into the bottom of the funnel or
steam tube to prevent burns; at any time, it is not allowed
to touch the steam tube with your hands or other body
parts. You can only turn the steam tube by touching
silicone sleeve that wraps the steam tube.
KNOW YOUR COFFEE MACHINE
1.Double-cup filter
2.Cleaning pin
3.Cleaning brush
4.Tool box
5.Button
6.Single-cup filter
7.Pressurized funnel
8.Drip plate
9.Floater
10.Drip tray
11.Bean box cover
12.Bean box
13.Pressure gauge
14.Funnel bracket
15.Water tank cover
16.Water tank
17.Knob
18.Milk cup
19.Steam tube
20.Coffee tamper
No.
PARTS
Qty
A
Bean box components
1
B
Water tray componen
1
C
Water tank components
1
D
Coffee Machine
1
E
High pressure funnel components
1
F
Two cups of single-layer filte
1
G
Tool Box
（
Cleaning needle*1
，
cleaning brush*1
）
1
H
Milk cup
1
I
Tamper
1
Control panel
Power button
Grind button
Double-cup button
Single-cup button
Pressure gauge
Bean box
Switch
Descaling indicator
Steam indicator
BEFORE THE FIRST USE
Before the first use or the machine has not been used for a long time, you should follow
below steps to rinse and warm up the internal pipes of the machine.
1. Check and ensure that all accessories are complete and not damaged.
2. Fill the water tank with clean water, and water level should not exceed the "MAX"
position.
3. Align the pressurized funnel with funnel bracket (no coffee powder is placed at this
moment), and rotate the funnel counterclockwise to lock it tightly (put in a single-cup or
double-cup filter as needed).
4. Put a cup onto drip plate, plug in the appliance and press Power button, the machine
enters into the preheating mode. And the machine will enter into the standby mode after
finish preheating.
5. Turn the knob to hot water position , after a while, hot water will flow out from steam
tube. Align the steam tube to drip tray or use a cup to collect the hot water.
6. Press “ ” or “ ” to clean the pipes in machine, hot water will come out from funnel.
Use the drip tray or use a cup to collect the hot water.
NOTE: Do not extend any parts of your body closed to funnel and steam tube to avoid
scalding during brewing hot water.
7. After water stops flowing, pour away the water in drip tray or in the cup.
8. Thoroughly clean the detachable parts of the whole machine with warm water.
NOTE: There may be noise when pumping water for the first time, it is normal.
Choose the right coffee powder
Coffee powder
The coffee should be freshly ground and subjected to deep roasting. You may need to
use French or espresso roasted coffee powder for espresso coffee. Pre-ground coffee
powder can only keep the aroma for 7 to 8 days unless it is stored in a sealed container,
and place it in a cool place. Do not store coffee in the refrigerator or freezer. In general, it
is not recommended to use pre-ground coffee powder. The coffee beans freshly ground
are more easily to retain the aroma of the coffee and obtain higher coffee quality.
Grind
If you are making coffee, this step is a key step in the espresso making process and
requires more practice.
• The correct powder should look like salt.
• If the powder is too finely ground, it may cause the coffee to flow intermittently or fail to
brew coffee.
• If the powder is too coarse, the water will flow through the coffee too quickly, which will
affect aroma and taste of the extracted coffee
• You can adjust the thickness of the ground coffee powder by adjusting the coffee bean
box, which will vary depending on the type and quality of the coffee beans you use, so
you need to make appropriate adjustments to achieve the best results.
• Fresh roasted coffee beans (within 1 month), the grinding position is set between 5-10,
the double-cup grinder produces about 19g of powder and the single-cup of 13g, this will
bring relatively good coffee extraction effect.
• In order to prevent the coffee beans from getting wet, affecting the grinding and the
final coffee taste and effect, please do not put too much coffee beans in the bean box.
Notes: In order to obtain a uniform and consistent coffee powder, be sure to adjust
the grinding degree according to the type and quality of coffee beans to obtain a
cup of high-quality coffee.
OPERATION INSTRUCTION
I. Brewing coffee, function of hot water and steam
1. Fill the water tank with drinking water, the water level should not exceed the "MAX"
position.
2. Plug in the power and press the Power button (make sure the knob is at “ ” position),
then the machine enters into the preheating mode. The specific operation is as follows:
The functional buttons are of their corresponding indicators. There are 3 indicators
around the knob, and there are two functional indicators on the left and right separately.
Indicators in different states show various working modes of the machine. Coffee
brewing, hot water and steam function cannot work at the same time, only one function
can work in one time.
Warm up: Press the “
”
once, the whole machine enters into warm-up mode, the power
indicator “
”
lights up, and “
” lights up
at the same time.
Standby state: When the whole machine is warmed up, it enters into standby mode. At
that time, the indicators of Power button, Grind button, Single-cup button and
Double-cup button light solidly, and the coffee machine can be used normally.
Brew a single-cup of coffee: In the standby mode, install the single-cup filter into the
funnel, load about 13 grams of coffee powder, use the coffee tamper and press the
coffee powder with a force of about 12.5Kg, then align the funnel to the funnel bracket,
turn the funnel counterclockwise to lock it. Put a coffee cup on the drip plate, press ,
the machine starts to brew a single-cup of coffee. When the set coffee dose is reached
(about 30ML), the machine will stop working automatically and enter into the standby
mode.
Brew a double-cup of coffee: In the standby mode, install the double-cup filter into the
funnel, load about 18 grams of coffee powder, use the coffee tamper and press the
coffee powder with a force of about 12.5Kg, then align the funnel to the funnel bracket,
turn the funnel counterclockwise to lock it. Put a coffee cup on the drip plate, press ,
the machine starts to brew a single-cup of coffee. When the set coffee dose is reached
(about 60ML), the machine will stop working automatically and enter into the standby
mode.
Customized setting:
1. Coffee dose of Single-cup and double-cup, you can adjust the specific coffee dose
according to your needs, operation is as follows:
Hold and press the Single-cup button “ ” or Double-cup button “ ”, and its
corresponding indicator flashes, and release the Single-cup button or Double-cup
button when coffee starts to flow out. When coffee dose reaches the desired amount,
press the Single-cup button “ ” or Double-cup button “ ”, the coffee stops dispensing,
the buzzer sounds, and the machine will record the coffee dose. When you brew coffee
next time, the machine will brew the coffee amount as per your setting ( adjustable
coffee amount ranges between 20ml-400ml.).
2. Hold and press “ ”, “ ” and “ ”will restore coffee dose of single and double-cup to
factory settings.
When extracting coffee, make sure that the funnel is turned counterclockwise into the
correct position as shown in the Figure below.
Boil hot water: In the standby mode, turn the knob to hot water indicator , the
machine enters into hot water mode, at that time, the hot water indicator and steam
indicator light solidly. Except the indicators of “ ” and “ ”, other indicators are off. Turn
the knob to knob indicator “ ”position , the machine stops brewing hot water and enters
into standby mode.
NOTE: The maximum water output of hot water function is greater than 170ml, it’s
important to use a container which is big enough to collect the hot water or there must
be someone to guard it when in use. After hot water function is finished, please turn the
knob to the twelve o'clock position in time, if not, the indicator will flash as an alarm, other
functions will not be available.
Steam preheating and steam function: In standby mode, turn the knob to “ ”
position . At that time, the steam indicator will flash.The single-cup indicator “ ” and
double-cup indicator “ ” will extinguish, which means the steam function is warming up.
Wait until steam indicator lights up steadily, the steam function is finished preheating,
and the machine enters into the steam mode.
NOTES:
1. The steam function will generate high-temperature steam, please pay attention to
avoid scalding when using it.
2. To ensure good foaming effect of milk, wait the steam runs for 3-5 seconds, and then
turn the knob to the “ ” position, extend the steam tube into the milk, and turn the knob
to “ ” position to froth the milk.
3. The maximum milk frothing time is 5 minutes.
4. After milk frothing, please turn the knob to the “ ” position in time. If it is not turned
back, the steam indicator “ ” will flash as an alarm. Other functions will be
unavailable.
Sleep state: The machine will automatically enter into the sleep mode after 20 minutes
of no operation during the standby mode.You can activate the machine again by
pressing Power button “ ”, the machine will re-enter into warm-up state.
Suggestion: We suggest that you can preheat the appliance, including the funnel, filters
and cup before brewing coffee, so that the coffee will not be affected by the coldness of
appliance. The specific operation is as below: Put the filter into the funnel and then install
the funnel onto the funnel bracket, put a cup well in position and press “ ” or “ ” to make
the appliance work. After the appliance stops working, the coffee-brewing can be activated.
Ⅱ. Grind Coffee Beans
This product has a function of grinding coffee bean, before using this function, please
make sure that all devices are installed in accordance with the requirements. The details
are as follows:
There are markings to show the coffee coarseness on bean box, see Fig. 3. To make the
coffee coarseness you prefer, make sure the coffee coarseness setting you want on
bean box is aligned with the mark position on the top cover (as shown in Fig. 4).
图四
1. Maker sure the bean box is installed in place. When the Grind button indicator lights up
solidly , the grinder is ready for use.
2. Add appropriate amount of coffee beans in the bean box. To prevent coffee beans
from getting wet, affecting the grinding and the final coffee taste and effect, please do
1
2
Fig. 1: Install the cutter head (2)
and tighten it clockwise, then
install the bean box (1) and screw
it as shown in Fig. 2.
Fig. 2: Align the positions in red
circles in the Figure, and press it
down, rotate it clockwise and
install it into the machine.
Fig. 3: From 0 to 30, coffee power is from
fine to coarse. Bigger number for coarser
coffee powder.
Fig. 4
not put too many coffee beans in the bean box.
3. As shown in Fig. 5, put the funnel with single-cup filter or double-cup filter into the
powder receiving bracket, as shown in Fig. 5.
4. Press “ ” to start grinding. And the grinder will automatically stop after reaching the
set grinding amount. You can also press “ ” to stop halfway.
NOTE: The default grinding time is time required for double-cup dose. And the grinder
will produce about 19g (about 13 seconds) of powder at the grinding settings of 5-10,
which has a relatively good coffee extraction effect.
If you use a single-cup filter, you need to manually control the amount of beans or reset
the grinding amount to ensure that the amount of powder is about 13g (about 10
seconds)
NOTE: Baking degree and freshness of coffee beans will affect the coffee taste, you may
need to fine-tune the grinding setting.
5. Take out the funnel, tap the funnel on the desktop, and add the coffee powder in the
filter.
6. Use the coffee tamper and apply it with a force of about 12.5kg to compact the coffee
Fig. 5
powder.
7. Turn the funnel counterclockwise into the funnel bracket, and select the corresponding
SINGLE or DOUBLE button according to the filter size.
NOTES:
1. When the bean box is not installed, the indicator of Grind button will illuminate in red
solidly.
2. When the grinding function cannot be used normally, the indicator of Grind button will
flash with three beeps can be heard.
3. When the grinder works continuously for 3 minutes and the intermediate rest time is
less than 6 minutes, the machine will limit the use of grinding function. After the rest time
reaches 6 minutes, the machine will automatically release the limitation and the grinder
can resume to work again.
4. When the grinder is limited to use, press the GRIND button “ ”, the buzzer will sound
three times, and the indicator of Grind button will flash.
Grinding time adjustment: You can set the grinding time as per your need. Keep
Tamp the coffee powder
downwards
When the edge of tamper align to
edge of funnel, powder amount is
appropriate
pressing the GRIND button “ ”, the indicator of Grind button will flash quickly and the
grinder will start working. When it runs to the time you want, release the the GRIND button
“ ”, the buzzer will sound, the machine will record the time. Next time you grind, the
grinder will run for the set time. The machine could only record the grinding time over 6
seconds. If the grinding time is less than 6 seconds, the machine cannot record it.
NOTE: Hold and press “ ” and “ ” buttons at the same time, you can restore the grinder
to factory setting.
III. Restore to factory settings
In the case of wrong settings, the user can press and hold the four buttons of POWER,
GRIND, SINGLE and DOUBLE at the same time.The machine will beep and all the indicators
will flash together 3 times. Then the machine will return to the factory settings.
Ⅳ. Tool box and cleaning accessories
The machine is equipped with a tool box which is used for storing cleaning pin and
cleaning brush. Single-cup filter and double-cup filter can be stored in the tool box as
well. The tool box is placed at the left lower part of appliance, where you can pull it out
when you remove drip tray from the machine (Fig. 6).
Fig.6
Cleaning pin
The cleaning pin is used for cleaning steam spout and filters. The thicker pin is for
cleaning steam tube (Fig. 7), and thinner one is for filters (Fig.8).
Cleaning brush
The cleaning brush is used for cleaning the grinding system. Following “Ⅲ. Clean the
grinder”, after taking out bean box and grinding wheel, you can use the cleaning brush
to clean the grinder chamber and the powder channel.
Clean the steam tube
with thicker pin
Clean the filters with
thinner pin
Fig.7
Fig.8
Clean the anti-static device and coffee
power outlet
(if coffee powder coming out slower
than usual or coffee powder floats, clean
the anti-static device and the coffee
powder outlet with attached cleaning
brush as Fig.9)
Clean the grinder chamber and the
powder channel with attached cleaning
brush as Fig.10.
V. Clean the grinder
The grinder may be influenced by coffee beans and some other factors during operation
to make the powder outlet channel be blocked. Please clean the powder outlet channel
in time when the following conditions occur:
1. Clean the powder outlet and grinder at least once every two weeks.
2. When there’s reduction in powder amount, please clean the powder passage and
grinding wheel.
Fig.8
Fig.9
The rear end of cleaning brush could be
used to detach filter from funnel as
Fig.11
Fig.10
3. When the coffee grinder is used to grind fine coffee powder, please clean the powder
channel in time.
4. The machine is equipped with an anti-static system which could prevent coffee
powder from spreading outside in grinding. When coffee powder floats out from funnel,
please use the cleaning brush to clean the the powder entrance area in time.
VI. Clean the grinder
NOTE: When cleaning the grinder, please make sure there are no beans in bean box, and
when the GRIND button “ ” is pressed, the grinder can work properly and no coffee
powder flows out from powder outlet.
1. Rotate the bean box counterclockwise to remove the bean box.
2. Turn the internal grinding wheel counterclockwise and take it out. Use the attached
cleaning brush to clean the grinding wheel and remove the coffee powder in the gears.
Please note that the grinding wheel cannot be directly rinsed with water.
3. Use the attached cleaning brush to clean the grinding chamber and the powder
channel.
4. Do not install the grinding wheel at this time, re-install the empty bean box, press the
GRIND button “ ”, let the grinder run to sweep out the powder residue in the grinding
chamber. (If powder inside is not removed completely, please repeat step 3 and 4)
5. Remove the bean box counterclockwise and install the grinding wheel well in position.
Cleaning is completed.
VII. Descaling
This product has a descaling reminder function and a descaling program, which needs
your operation as following steps. Descaling process takes about 10 minutes.
NOTE: When starting the descaling program, please make sure:
1. Ensure that there is at least 1 liter of water in the water tank.
2. Empty the drip tray and install it in place.
3. Turn on the machine and make it stay in standby mode.
4. Place double-cup filter into the funnel.
5. Turn the funnel into the funnel bracket.
6. You can exit the cleaning function at any time by pressing the Power button “ ”.
7. When the cleaning starts, the indicator of Power button “ ” and the descaling
indicator flash. And they will keep flashing during the whole cleaning process..
8. If the descaling does not start within 1 minute, the appliance will exit from the
descaling cycle and return to standby mode.
Descaling instructions
It is recommended to descale every 4-6 months.
Descaling can be selected:
A. Coffee machine descaling tablets
B. Liquid descaler
C. White vinegar and warm water
Descaling cycle
The descaling cycle takes about 10 minutes.
NOTE: After the descaling reminder starts or before the user starts the descaling
program, please complete the following descaling preparations before running the
descaling program!
Descaling preparation
Add the solution to the water tank (choose one of three methods)
A. Fill the water tank with 1 liter of water. Add the descaling tablets and wait for the
descaling tablets to dissolve.
B. Add half a cup of liquid descaling agent into the water tank, then add 1 liter warm
water to allow the solution to mix thoroughly.
C. Add 1.5 scoops of white vinegar into the water tank, then add 1 liter warm water to
allow the solution to mix thoroughly.
Insert the water tank into place.
Place a container
Place a 1 liter of container under the brewing head and another 1 liter of container under
the steam tube.
After completing the above steps, you can start the cleaning process as following:
1. When the system detects that the flow amount of the whole machine reaches 15 liter,
the descaling function will start and the machine will automatically enter the descaling
program.
2. In standby mode, keep pressing the buttons of “ ” and “ ”, the machine will start the
descaling process. When the indicator of Power button turns on and the descaling
indicator flashes quickly, follow the steps as below.
Step 1: Start the descaling cycle
Turn the knob to “ ” position.
The descaling indicator turns to flash slowly, the pump starts to work, the hot water
dispenses from the brewing head and steam tube, and the pump will make different
noises after 2 minutes. When the hot water stops coming out from brewing head and
steam tube, turn the knob to “ ” position.
The indicator of “ ” button lights solidly while the steam indicator flashes.
Please perform the step 2.
Step 2: Prepare to clean up
Important: A maximum of 5 minutes is allowed to take to complete the following steps
before exiting from the descaling cycle.
The steam tube and brewing head need to be cleaned with fresh water for removing the
descaling solution.
Clean the water tank
Fill the water tank with water
Empty the containers
Step 3: Start cleanup
Turn the knob to the “ ” position,
At that time, the indicator of “ ” and the descaling indicator flash.
The pump starts to work, the hot water will dispense from the brewing head and steam
tube, and the pump will make different noises after 2 minutes.
When hot water stops coming out from brewing head and steam tube, the descaling is
complete.
Descaling cycle completed
The indicator stops illuminating and knob indicator “ ” starts flashing, which means the
machine completes this step.
Turn the knob to the “ ” position, the indicators of all buttons will illuminate.
When the descaling cycle is finished, the buzzer will sound and the indicator of “ ” will
stop flashing.
Turn the knob back to the vertical position
The machine returns to standby mode.
VIII. Water shortage reminder
When the water tank is short of water, the machine will remind the user to refill the water
tank with water. At this time, the indicators of Power button, Grind button, Single-cup
button and Double-cup button flash flash, accompanied with a buzzer sound.
NOTES:
1. The reminder will appear when coffee powder is too fine and the machine cannot brew
coffee.
2. The buzzer sounds only 5 times and will not sound for a long time.
3. If there is no operation one minute after reminding, the machine will enter into
standby mode.
CLEANING AND MAINTENANCE
⚠ WARNING: Please unplug before cleaning to allow the coffee machine to cool
down sufficiently to prevent scalding. Do not immerse the coffee machine or the power
cord plug in water or other liquids to avoid danger.
1. After each use, put all detachable parts into water for cleaning, add cleaning liquid if
necessary, and then rinse with clean water.
2. Often use a moisture-proof sponge to scrub the external surface of the coffee
machine to remove dirt.
NOTE: Do not use alcohol or detergent, and do not immerse the machine in water for
cleaning.
3. Turn clockwise to remove the metal funnel to remove the coffee grounds, then you
can use a detergent to clean the funnel and metal filter accessories, but you must rinse
them with clean water after.
4. After cleaning all the detachable parts, wipe all parts to dry.
NOTE: The detachable water tank cannot be washed in the dishwasher.
TROUBLESHOOTING
Malfunction
Reason
Solution
No display
Check that the plug is in
place and Power button is
pressed.
Insert the power plug, make
sure you press the Power
button.
The indicator on the front
panel of the machine is red
The bean box is not
installed.
Install bean box
There are water marks on
the bottom of the machine
The water tank or the water
tray is not installed in place.
Make sure that the water
tank and the drip tray are
The drip tray is full
installed in place, and the
drip tray is empty.
If the issue is not solved,
please don’t disassemble
the machine on your own,
but send it to local
authorized maintenance
center for reparation.
You will hear a ticking
sound after starting the
machine and a hissing
sound after the coffee is
dispensed.
This is a normal
phenomenon and the
sound is produced by the
normal operation of the
pressure control valve.
No coffee comes out from
funnel, or coffee does not
come out from funnel
smoothly, or the funnel
cannot be installed in
funnel bracket properly.
Excessive amount of coffee
powder, too fine coffee
powder or excessive
pressure
The amount of powder
should not exceed the
standard amount. Adjust
the grinding setting of the
grinder appropriately until it
is suitable. It should not be
pressed repeatedly with
excessive force when
pressing the powder.
Coffee without crema.
The coffee beans are damp
or the coffee powder is too
coarse.
Choose fresh coffee beans
and powder with moderate
grinding thickness to make
coffee.
No steam
The steam function is not
preheated;
The steam nozzle is
blocked.
The machine can only
produce steam after the
machine is preheated in
steam mode; the machine
needs to be descaled and
use a cleaning needle to
clean the steam nozzle.
Can't make coffee or hot
water immediately after the
steam comes out and the
machine will automatically
pump water.
After steaming is
completed, the pressure
needs to be released to
reduce the temperature. At
this time, other operations
cannot be performed.The
water pumping is used for
cooling down the heating
element quickly.
It takes 20-30s to release
the pressure and cool
down. After the pressure is
released and the cooling
down is finished, the
indicators on the control
panel will work properly,
then you can brew coffee
and hot water normally.
If you do not find the cause of the problem, please do not disassemble the
machine and you should contact your local maintenance agency.
ENVIRONMENTAL PROTECTION
You can help protect the environment!
Strictly abide by the regulations: Please
put the discarded electrical equipment
into the corresponding waste station for
disposal.
Thank you for purchasing this product! If you have any questions about the
product, such as missing parts, damaged products, product
assembling, and operation, please contact us via Amazon Message or
customer service number: 213-4467172 or 661-4358826
IMPORTANT
Please call our customer service department for any consulting:
213-4467172
661-4358826
(8:30am - 5:30pm P.S.T.)
DATED PROOF OF PURCHASE IS REQUIRED FOR WARRANTY SERVICE.
AVIS
Veuillez appeler le service à la clientèle pour toutes questions au:
213-4467172
661-4358826
(8:30am - 5:30pm P.S.T.)
PREUVE D’ACHAT ORIGINALE REQUISE POUR SERVICE DE GARANTIE.
IMPORTANTE
Sólo hay que llamar nuestro departamento de servicio
al cliente en caso de tener preguntas o inquietudes:
213-4467172
661-4358826
(8:30am - 5:30pm P.S.T.)
SE REQUIERE PRUEBA DE COMPRA CON FECHA PARA SERVICIO BAJO
GARANTÍA.
Address: ROWAN ELECTRIC APPLIANCE LLC
28407 Ascent Way, Santa Clarita, CA 91350
Phone: 213-4467172 or 661-4358826
