Samsung Ht-h6500wm/za Home Theater System User Manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

5.1CH Blu-ray™

Home Entertainment System

user manual

HT-H6500WM

This Nanum Gothic Eco font is provided by NAVER.

2 - English

Safety Information

The slots and openings in the cabinet and in

the back or bottom are provided for necessary

ventilation. To ensure reliable operation of this

apparatus, and to protect it from overheating,

these slots and openings must never be blocked or

covered.

Do not place this apparatus in a confined space,

such as a bookcase, or built-in cabinet, unless

proper ventilation is provided.

Do not place this apparatus near or over a

radiator or heat register, or where it is exposed

to direct sunlight.

Do not place vessels (vases etc.) containing

water on this apparatus. A water spill can cause

a fire or electric shock.

Do not expose this apparatus to rain or place it

near water (near a bathtub, washbowl, kitchen

sink, or laundry tub, in a wet basement, or near a

swimming pool, etc.). If this apparatus accidentally

gets wet, unplug it and contact an authorized

dealer immediately.

This apparatus uses batteries. In your community,

there might be environmental regulations that

require you to dispose of these batteries properly.

Please contact your local authorities for disposal or

recycling information.

Do not overload wall outlets, extension cords or

adaptors beyond their capacity, since this can result

in fire or electric shock.

Route power-supply cords so that they are not

likely to be walked on or pinched by items placed

on or against them. Pay particular attention to

cords at the plug end, at wall outlets, and the point

where they exit from the apparatus.

To protect this apparatus from a lightning storm,

or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will

prevent damage to the set due to lightning and

power line surges.

Before connecting the AC power cord to the DC

adaptor outlet, make sure the voltage designation

of the DC adaptor corresponds to the local

electrical supply.

Never insert anything metallic into the open parts

of this apparatus. Doing so may create a danger of

electric shock.

To avoid electric shock, never touch the inside of

this apparatus. Only a qualified technician should

open this apparatus.

Make sure to plug the power cord in until it is

firmly seated. When unplugging the power cord

from a wall outlet, always pull on the power cord's

plug. Never unplug by pulling on the power cord.

Do not touch the power cord with wet hands.

If this apparatus does not operate normally - in

particular, if there are any unusual sounds or smells

coming from it - unplug it immediately and contact

an authorized dealer or service center.

Maintenance of Cabinet.

Before connecting other components to this

product, be sure to turn them off.

If you move your product suddenly from a cold

place to a warm place, condensation may occur

on the operating parts and lens and cause

abnormal disc playback. If this occurs, unplug the

product, wait for two hours, and then connect

the plug to the power outlet. Then, insert the

disc, and try to play back again.

Be sure to pull the power plug out of the outlet

if the product is to remain unused or if you are

leaving the house for an extended period of time

(especially when children, elderly, or disabled

people will be left alone in the house).

Accumulated dust can cause an electric shock,

an electric leakage, or a fire by causing the

power cord to generate sparks and heat or the

insulation to deteriorate.

Contact an authorized service center for

information if you intend to install your product

in a location with heavy dust, high or low

temperatures, high humidity, chemical substances,

or where it will operate 24 hours a day such as in

an airport, a train station, etc. Failing to do so may

lead to serious damage of your product.

Use only a properly grounded plug and wall outlet.

An improper ground may cause electric shock or

equipment damage. (Class l Equipment only.)

To turn this apparatus off completely, you must

disconnect it from the wall outlet. Consequently,

the wall outlet and power plug must be readily

accessible at all times.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK). THERE ARE NO

USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

This symbol indicates that high voltage

is present inside. It is dangerous to

make any kind of contact with any

internal part of this product.

This symbol indicates that important

literature concerning operation and

maintenance has been included with

this product.

3 - English

Safety~Information

Do not allow children to hang on the product.

Store the accessories (battery, etc.) in a location

safely out of the reach of children.

Do not install the product in an unstable location

such as a shaky self, a slanted floor, or a location

exposed to vibration.

Do not drop or strike the product. If the product is

damaged, disconnect the power cord and contact

a service center.

To clean this apparatus, unplug the power cord

from the wall outlet and wipe the product using

a soft, dry cloth. Do not use any chemicals such

as wax, benzene, alcohol, thinners, insecticide,

air fresheners, lubricants, or detergent. These

chemicals can damage the appearance of the

product or erase the printing on the product.

Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids,

such as vases on the apparatus.

Do not dispose of batteries in a fire.

Do not plug multiple electric devices into the same

wall socket. Overloading a socket can cause it to

overheat, resulting in a fire.

There is danger of an explosion if you replace

the batteries used in the remote with the wrong

type of battery. Replace only with the same or

equivalent type.

WARNING~:

TO PREVENT THE SPREAD OF FIRE,

KEEP CANDLES AND OTHER ITEMS

WITH OPEN FLAMES AWAY FROM

THIS PRODUCT AT ALL TIMES.

This product contains chemicals known to the State

of California to cause cancer and reproductive

toxicity.

To reduce the risk of fire or electric shock, do not

expose this appliance to rain or moisture.

FCC~NOTES~(for~U.S.A)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio or television reception, which

can be determined by turning the equipment off and

on.

If interference is present, the user is encouraged to

try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect this equipment to an outlet on a circuit

that the receiver is not connected to.

Consult the dealer or an experienced radio/TV

technician for help.

This class B digital product meets all requirements

of the Canadian Interference - Causing Equipment

Regulations.

CLASS~1~LASER~pROdUCT

This product is classified as a CLASS 1 LASER product.

Use of controls, adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

Complies with 21CFR 1040.10 except for deviations

pursuant to Laser Notice No. 50, dated June 24,

2007.

dANGER~:

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID DIRECT EXPOSURE TO BEAM.

(FDA 21 CFR)

CAUTION~:

CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE TO

THE BEAM (IEC 60825-1)

THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN THE COVER. DO

NOT REPAIR THE PRODUCT YOURSELF. REFER

SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions listed

below. Keep these operating instructions handy for

future reference.

1.~Read these instructions.

2.~Keep these instructions.

3.~Heed all warnings.

4.~Follow all instructions.

5.~Do not use this apparatus near water.

6.~Clean only with a dry cloth.

7.~Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

4 - English

Safety Information

8.~Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including AV receivers) that produce

heat.

9.~Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10.~ Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where it exits the

apparatus.

11.~ Only use attachments/accessories specified by

the manufacturer.

12.~ Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid injury from tip-over.

13.~ Unplug this apparatus during lightning storms

or when unused for long periods of time.

14.~ Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as when the

power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

3D Precautions

IMPORTANT HEALTH AND SAFETY INFORMATION

FOR 3D PICTURES.

Read and understand the following safety

information before using the 3D function.

Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea, and

headaches. If you experience any such symptom,

stop viewing 3D TV, remove the 3D Active Glasses,

and rest.

Watching 3D images for an extended period of

time may cause eye strain. If you feel eye strain,

stop viewing 3D TV, remove your 3D Active

Glasses, and rest.

A responsible adult should frequently check on

children who are using the 3D function. If there are

any reports of tired eyes, headaches, dizziness, or

nausea, have the child stop viewing 3D TV and rest.

Do not use the 3D Active Glasses for other

purposes (such as general eyeglasses, sunglasses,

protective goggles, etc.)

Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving around

may cause you to bump into objects, trip, and/or

fall, and cause serious injury.

If you want to enjoy 3D content, connect a 3D

device (3D compliant AV receiver or TV) to the

product’s HDMI OUT port using a high-speed HDMI

cable. Put on 3D glasses before playing the 3D

content.

The product outputs 3D signals only through an

HDMI cable connected to the HDMI OUT port.

The video resolution in 3D play mode is fixed to

the resolution of the original 3D video. You can not

change the resolution.

Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not

operate properly in 3D play mode.

You must use a high-speed HDMI cable for proper

output of the 3D signal.

Stay at least three times the width of the screen

from the TV when watching 3D images. For

example, if you have a 46 inch screen, stay 138

inches (11.5 feet) from the screen.

Place the 3D video screen at eye level for the best

3D picture.

When the product is connected to some 3D

devices, the 3D effect may not function properly.

This product does not convert 2D content into 3D.

“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks

of the Blu-ray Disc Association.

5 - English

Contents

GETTING~STARTEd

6 Accessories

6 Speaker Components

7 Front Panel

7 Rear Panel

8 Remote Control

CONNECTIONS

9 Connecting the Speakers

11 Attaching the Toroidal Ferrite Core to the

Power Cord of the Wireless Receiver Module

(SWA-6000)

12 Connecting to a TV and External Devices

13 Connecting to a Network Router

SETTINGS

14 The Initial Settings Procedure

14 The Home Screen at a Glance

15 Accessing the Settings Screen

15 Settings Menu Functions

20 Network Setup

23 Wi-Fi Direct

24 Upgrading Software

pLAyING~CONTENT

26 Playing Commercial Discs

26 Playing Multimedia Files

28 Controlling Video Playback

31 Controlling Music Playback

36 Using Bluetooth

38 Playing Photo Contents

39 Listening to the Radio

40 Using the Special Effects Remote Control

Buttons

NETWORk~SERvICES

41 Logging In to Your Samsung Account

41 Adding a Credit Card

41 Before Using MOVIES & TV SHOWS or

SAMSUNG APPS

42 Using MOVIES & TV SHOWS

43 Using SAMSUNG APPS

44 Screen Mirroring

45 Using the Web Browser

48 Linking your Internet Service Accounts to the

Product

48 BD-LIVE™

AppENdIx

49 Additional Information

50 Disk and Format Compatibility

56 Troubleshooting

60 Specifications

61 Licenses

~Figures~and~illustrations~in~this~User~Manual~

are~provided~for~reference~only~and~may~

differ~from~actual~product~appearance.

6 - English

Getting Started

Check the box for the accessories and speaker components listed or shown below.

Accessories

~Remote~Control (AH59-02630A)

Lithium~Battery (4301-001042)

~User~Manual (AH68-02684A)

(For Power cord)

power~Cable

(3903-000598)

FM~Antenna

(AH42-00021A)

Toroidal~Ferrite~Core

(3301-000144)

Soft~Cloth~

(BN63-02368B)

WARNING,~dO~NOT~INGEST~BATTERy,~CHEMICAL~BURN~HAZARd,~~

[The~remote~control~supplied~with]~This~product~contains~a~coin/button~cell~battery.~~

If~the~coin/button~cell~battery~is~swallowed,~it~can~cause~severe~internal~burns~in~just~2~hours~and~

can~lead~to~death.~keep~new~and~used~batteries~away~from~children.~If~the~battery~compartment~does~

not~close~securely,~stop~using~the~product~and~keep~it~away~from~children.~If~you~think~batteries~might~

have~been~swallowed~or~placed~inside~any~part~of~the~body,~seek~immediate~medical~attention.

Speaker Components

Center

Front~x~2Surround~x~2Speaker~Cable~x~6Subwoofer

Wireless~Receiver~

Module~(SWA-

6000)~

7 - English

Getting~Started

Front Panel

dISpLAy~ICONS

FUNCTIONSTOppLAy/pAUSE

OpEN/CLOSE

vOLUME~

CONTROL

pOWER

5V 0.5A

USBREMOTE~CONTROL~SENSOR

dISpLAy

dISC~TRAy

✎

When the product is on, do not let children touch the product's surface. It will be hot.

✎

To upgrade the product's software through the USB jack, you must use a USB flash drive.

✎

When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the

button on the product or the remote. To play the movie, you must select Play Movie or Start in the

disc menu, and then press the

button.

✎

If you are using the Internet or are playing content from a USB device on your TV through the home

theater, you cannot select the Bd/dvd mode with the

SOURCE button. To select the Bd/dvd mode,

exit the Internet or stop the content you are playing on the TV, and then select the Bd/dvd mode.

Rear Panel

HDMI OUT

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

HDMI IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3Ω

COOLING~FAN

*~FM~ANTENNAAUx~IN

HdMI~OUT

SpEAkER~OUTpUT~

CONNECTORS

pOWER~CORd

LAN~TERMINAL

HdMI~INExTERNAL~dIGITAL~

AUdIO~IN~(OpTICAL)

*~~Connecting~the~FM~Antenna

1.~Connect the supplied FM antenna to the FM ANT Jack.

2.~Slowly move the antenna wire around until you find a location where reception is good, then fasten

it to a wall or other rigid surface.

✎

Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate

ventilation.

Do not obstruct the cooling fan or ventilation holes.

✎

This product does not receive AM broadcasts.

8 - English

Getting Started

Remote Control

Tour~of~the~Remote~Control

Installing~batteries~in~the~Remote~Control

Use a coin to turn the remote

control cover anti-clockwise to

remove it as shown in the figure

above.

Insert a 3V lithium battery. Keep

the positive (+) pole upward

when inserting the battery. Put

the battery cover on and align

the '●' marks side by side as

shown in the figure above.

Use a coin to turn the cover

clockwise as far as it will go to

fix it in place.

Turn the product on and off.

Adjust the volume.

Press to move to the Home screen.

Press to skip backwards(

[

) or

forwards(

]

)

Press and hold to search

backwards(

(

) or forwards(

)

Select on-screen menu items and

change menu values.

Search for active FM stations

and to change channels.

Return to the previous menu.

Use to enter the Popup menu/Title

menu.

Press to apply sound effects.

Press to apply the DTS Neo:Fusion II

or 3D sound effect.

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

Press to select MANUAL/PRESET in

the Tuner function.

Cut off the sound temporarily.

Press to play disc or files.

Press to pause playing.

Press to select the Home Theater's

mode (HDMI, AUX, BD/DVD, etc.).

Press to use the Tools menu.

To display the number keypad (may

include function keys when

applicable) on the screen, press and

hold the button.

Press to stop the disc playing or to

exist the menu.

Use to display the playback

information when playing a Blu-

ray/DVD disc or files.

Use to set a preset radio

frequency.

Press to view the disc menu.

Set a Sleep time to shut off the

product.

Press to open and close the disc tray.

Select STEREO or MONO for radio

broadcasts.

✎

While playing multimedia content in SAMSUNG~AppS, press and hold

button on the remote to

pause playback. To stop playback, press and hold

(ExIT) button on the remote.

9 - English

Connections

This section describes various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Surround~(L)

Surround~(R)

product

Center

Subwoofer

Wireless~~

Receiver~Module

Front~(L)

Front~(R)

position~of~the~product

Place it on a stand or cabinet shelf,

or under the TV stand.

Selecting~the~Listening~position

The listening position should be

located about 2.5 to 3 times the

TV's screen size away from the TV.

For example, if you have a 46 inch

screen, locate the listening position

115 to 138 inches (9.6 to 11.5 feet)

from the screen.

Front~Speakers~

Place these speakers in front of your listening position, facing inwards

(about 45°) toward you. Place the front speakers so that their tweeters

will be at the same height as your ear. Align the front face of the front

speakers with the front face of the center speaker or place them slightly in

front of the center speakers.

Center~Speaker

It is best to install the Center Speaker at the same height as the front

speakers. You can also install it directly over or under the TV.

Surround~Speakers

Place these speakers to the side of your listening position. If there isn't

enough room, place these speakers so they face each other. Position them

about 2 to 3 feet (60 to 90cm) above your ear, facing slightly downward.

* Unlike the front and center speakers, the surround speakers are used

mainly for sound effects. Sound will not come from them all the time.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

*~~Surround~speakers~must~be~connected~to~the~wireless~receiver~module.

*~~The~appearance~of~your~speakers~may~differ~from~the~illustrations~in~this~manual.

*~~Each~speaker~has~a~colored~label~on~its~back~or~underside.~Each~cable~has~a~single~colored~band~near~

its~end.~Match~the~band~on~each~cable~to~the~speaker~label~by~color,~and~then~connect~the~cable~to~the~

speaker.~See~page~10~for~exact~instructions.

Connections

10 - English

Connections

Speaker~Cable~Connections

1.~Match each speaker cable bundle to the correct speaker by matching the color coded plug on each

bundle to the colored sticker on the bottom or back of each speaker.

2.~Connect the speaker wire plugs from each speaker to the back of the product by matching the

colors of the speaker plugs to the colors of the speaker jacks.

HDMI OUT

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3Ω

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3Ω

Front Speaker (R)

Subwoofer

Center Speaker

Wireless Receiver Module

Surround

Speaker (L)

Front Speaker (L)

Surround

Speaker (R)

* This product should be connected with the SWA-6000 only.

✎

If you place a speaker near your TV set, the screen color may be distorted because of the magnetic

field.

✎

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module

is too close to the product, sound from the speakers may be disrupted because of interference.

✎

If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other

device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be

disrupted because of interference.

✎

The maximum transmission distance from the product to the wireless receiver module is about 33

feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or

metallic wall is between the product and the wireless receiver module, the system may not operate

at all, because the radio waves cannot penetrate metal.

✎

If the product doesn't make a wireless connection, you need to run an ID Set between the product

and wireless receiver module. With the product turned off, press and hold

(mute) button on the

remote control for 5 seconds. Turn on the wireless receiver module. Then, press and hold the "Id~

SET" button on the back of the wireless receiver module for 5 seconds, and then turn the product

on.

11 - English

Connections

|~CAUTION~|

▶If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall

wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully

hang each speaker on a screw or nail.

▶Do not let children play with or near the speakers. They could get hurt if a speaker falls.

▶When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.

▶ Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands

or alien substances into the duct (hole) of the subwoofer speaker.

▶ Do not hang the subwoofer on the wall using the duct (hole).

▶ The wireless receiving antenna is built into the wireless receiver module. Keep it away from water

and moisture.

▶For optimal listening performance, make sure that the area around the wireless receiver module

location is clear of any obstructions.

▶In 2-CH mode, you will hear no sound from the wireless surround speakers.

Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless

Receiver Module (SWA-6000)

If you attach a Toroidal ferrite core to the power cord of the

wireless receiver module, it will help prevent RF interference from

radio signals.

1.~Pull the fixing tab of the Toroidal ferrite core to open it.

2.~Make two loops in the wireless receiver module power cord.

3.~Attach the Toroidal ferrite core to the wireless receiver

module's power cord as shown in the figure on the right, and

then close it by pressing it until it clicks.

Attach the ferrite core as close to the Wireless Receiver

Module as possible.

12 - English

Connections

Connecting to a TV and External Devices

HDMI OUT

LAN

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

HDMI IN

HDMI OUT HDMI IN

AUDIO OUT

OPTICAL OUT

HDMI OUT

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

HDMI IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3Ω

Method~1Method~2

Method~3

Red

White

External~devices

Connecting~to~a~Tv

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI

IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home

theater with only this cable connected. See page 17 in this manual and the section on ARC in your

TV's user's manual for details.

Connecting~to~External~devices

~Method~1~~AUx~IN~:~Connecting~an~External~Analog~Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out

jack on the external analog component.



Select the AUx mode.

Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

~Method~2~~OpTICAL~:~Connecting~an~External~digital~Audio~Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite

Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the

Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device

using a digital optical cable.



Select the d.~IN mode.

~Method~3~~HdMI~IN~:~Connecting~to~an~External~Component~with~an~HdMI~Cable

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI

OUT jack on your digital device.



Select the HdMI~mode.

✎

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

✎

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

✎

This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

Selecting~an~External~device~to~Use

To select an external device after you have connected it, press the SOURCE button. Each time you press

the button, the mode changes in this order :

Bd/dvd~

;

~d.~IN~

;

~AUx~

;

~HdMI~

;

~FM~

;

~BT

13 - English

Connections

Connecting to a Network Router

You can connect your product to your network

router using one of the methods illustrated

below.

Wired~Network

Broadband~

service

Broadband~

service

Broadband~modem~

(with~integrated~router)

Broadband~

modem~

Router

HDMI OUT

LAN

POWER

AUX IN FM ANT

OPTICAL

DIGITAL

AUDIO IN

HDMI IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

IMPEDANCE : 3Ω

✎

Your router or your Internet Service Provider's

policies may prevent the product from

accessing Samsung's software update server.

If this occurs, contact your Internet Service

Provider (ISP) for more information.

✎

DSL users, please use a router to make a

network connection.

✎

To use the DLNA function, you must connect

your PC to your network as shown in the

illustrations above.

The connection can be wired or wireless.

Wireless~Network

Broadband~

service

Wireless~Ip~sharer

✎

If your wireless IP router supports DHCP, this

product can use a DHCP or static IP address to

connect to the wireless network.

✎

Set your wireless IP router to Infrastructure

mode. Ad-hoc mode is not supported.

✎

The product supports only the following

wireless security key protocols:

WEP (OPEN/SHARED), WPA-PSK (TKIP/

AES), WPA2-PSK (TKIP/AES)

✎

Select a channel on the wireless IP router that

is not currently being used. If the channel set

for the wireless IP router is currently being

used by another device nearby, it will result in

interference and communication failure.

✎

In compliance with the newest Wi-Fi

certification specifications, Samsung home

theaters do not support WEP, TKIP, or TKIP-

AES (WPS2 Mixed) security encryption in

networks running in the 802.11n mode.

✎

Wireless LAN, by its nature, may cause

interference, depending on the operating

conditions (AP performance, distance,

obstacles, interference by other radio devices,

etc).

14 - English

Settings

The Initial Settings Procedure

The Home menu will not appear if you do

not configure the initial settings.

The OSD (On Screen Display) may change in

this product after you upgrade the software

version.

The access steps may differ depending on

the menu you selected.

After you have finished connecting the home

theater to your TV, turn on the TV, and then turn

on the home theater. The first initial setup screen

appears. The setup screens appear in this order:

Language, Network Configuration, Terms and

Conditions, Screen Resolution (Aspect Ratio),

and Speaker Layout. Depending on the software

version installed on your home theater, you may

also see the Software Update screen. Follow the

instructions displayed on each screen, which will

guide you through the easy setup procedure.

If you are not ready to set up the network

configuration or it is problematic, you can select

Skip and set it up later.

(See page 20)

✎

To edit your settings after the initial setup,

select Settings > System > Setup in the Home

screen or select the Reset option. (See page

20)

The Home Screen at a Glance

PLAY DISC

App 1 App 2 App 3 App 4 App 5 App 6

Screen Mirroring

FunctionSettings

MOVIES & TV SHOWS

MULTIMEDIA

SAMSUNG APPS

No Disc

1 2 3 4

5 6 8 97

RECOMMENDEDMY APPS

pLAy~dISC

Displays information about the disc currently in

the disc tray. Press

Ok to start playing the disc.

MOvIES~&~Tv~SHOWS

Download movies and TV Shows from the

Internet.

✎

Depending on your country, this menu

function may not be supported.

MULTIMEdIA

Play photos, videos, or music content from

Discs, USB devices, PCs, mobile devices, or

cloud services.

SAMSUNG~AppS

Download/Access various for pay or free-of-

charge applications.

RECOMMENdEd

A list of useful and popular apps we

recommend you download.

My~AppS

Displays downloaded and installed apps. You

can change the display order. (See page 43)

Screen~Mirroring

Set up the wireless mirroring function between

the home theater and a smart phone or tablet.

✎

Depending on your country, this menu

function may not be supported.

Function

Use to switch between external devices

connected to Digital In, AUX, or HDMI IN, to

switch to the Tuner, or to switch to a connected

Bluetooth device. You can also use the remote's

SOURCE button or the main unit's

button.

Settings

Set various functions to suit your personal

preferences.

Selecting an Option on the Home Screen

1.~To select an option on the Home screen,

move the cursor using the

buttons

until it highlights the option of your choice,

and then press the Ok button.

✎

If you leave the product in the stop mode for

more than 5 minutes without using it, a screen

saver will appear on your TV. If the product is

left in the screen saver mode for more than 20

minutes, the power will automatically turn off.

15 - English

Settings

Accessing the Settings Screen

1.~Select Settings on the Home screen, and

then press Ok. The Settings screen appears.

picture

3d~Settings~

Tv~Aspect~Ratio

~16:9~Original

Bd~Wise~Off

Resolution~Auto

Movie~Frame~(24Fs)~Auto

dvd~24Fs~Conversion~Off

Fit~Screen~Size~Size~3

Picture

Sound

Network

Smart~Hub

System

Support

Settings

2.~To access the menus, sub-menus, and

options on the Settings screen, please refer

to the remote control illustration below.

Buttons~on~the~Remote~Control~Used~

for~the~Settings~Menu

HOME Button : Press to move to the

Home screen.

(

RETURN) Button : Press to return to

the previous menu.

Ok / dIRECTION Button :

Press

to move the cursor or

select an item.

Press the

Ok button to activate the

currently selected item or confirm a

setting.

(

ExIT) Button : Press to exit the

current menu.

detailed~Function~Information

Each Settings function, menu item, and individual

option is explained in detail on-screen. To view an

explanation, use the

buttons to select

the function, menu item, or option. The

explanation will usually appear on the right of the

screen.

A short description of each Settings function starts

below. Additional information on some of the

functions is also in the Appendix of this manual.

Settings Menu Functions

picture

3d~Settings

Set up the 3D related functions.



3d~Blu-ray~playback~Mode: Select whether

to play a Blu-ray Disc with 3D contents in 3D

Mode. If you move to the Home or Smart Hub

Home menu while in 3D mode, the product will

switch to 2D automatically.



Screen~Size: Enter the size of the TV attached

to the product. The product will automatically

adjust the 3D output to the screen size of the

T V.

✎

Carefully read the health and safety

information before viewing

3D content. (See

page 4)

Tv~Aspect~Ratio

Lets you adjust the output of the product to

the screen size of your TV. (See page 49)

Bd~Wise

Bd~Wise is Samsung’s latest inter-connectivity

feature.

When you connect a Samsung product and a

Samsung TV with Bd~Wise to each other via

HDMI, and Bd~Wise is on in both the product

and TV, the product outputs video at the video

resolution and frame rate of the Blu-ray/DVD

Disc.

Resolution

Lets you set the output resolution of the HDMI

video signal to Bd~Wise, Auto, 1080p, 1080i,

720p, 480p. The number indicates the number

of lines of video per frame. The i and p indicate

interlaced and progressive scan, respectively.

The more lines, the higher quality.

16 - English

Settings

Movie~Frame~(24Fs)

Setting the Movie~Frame~(24Fs) feature to Auto

lets the product adjust its HDMI output to 24

frames per second automatically for improved

picture quality if attached to a 24Fs compatible TV.

You can enjoy the Movie~Frame~(24Fs) feature

only on a TV supporting this frame rate.

Movie Frame is only available when the

product is in the HDMI 1080p output

resolution modes.

dvd~24Fs~Conversion

Converts DVD playback to 24 frames per

second and outputs it via HDMI. This option is

only available when Movie~Frame~(24Fs) is set

to on.

Fit~Screen~Size

Lets you select the optimal size for the Smart

Hub or Screen~Mirroring screen.

HdMI~Color~Format

Lets you set the color space format for the

HDMI output to match the capabilities of the

connected device (TV, monitor, etc).

HdMI~deep~Color

Lets you set the product to output video

from the HDMI OUT jack with Deep Color.

Deep Color provides more accurate color

reproduction with greater color depth.

progressive~Mode

Lets you improve picture quality when viewing

DVDs.

Sound

Simple~Speaker~Setup

Lets you configure the settings of the speakers

you have connected to obtain the best possible

surround sound.



Normal~Mode: Select if you have set up your

speakers in the recommended speaker layout

with the surround speakers next to or behind

the listening positions.



Simple~Mode: Select if you have put your

surround speakers in front of the listening

position. Downmixes the front sound to the

surround sound speakers.

✎

SFE, Virtual 7.1 will not operate when the

simple mode is on.

Speaker~Settings



Sound~Output~: Lets you select which speakers

are active, either the TV's speakers or the home

theater's speakers.



Settings~(Home~Theater~Speakers)~: Lets you

adjust the following speaker settings and

turn the test tone on and off so you can test

the speakers.

volume~Level : Lets you adjust the relative

loudness of each speaker from 6dB to -6dB. For

example, if you like deep bass, you can increase

the loudness of the subwoofer by 6dB.

distance

Lets you adjust the relative

distance of each speaker from the listening

position up to 30 feet. The farther the

distance, the louder the speaker will be.

Speaker~Test

Begins a test to set the best

surround sound configuration. Press Stop~

Test to stop the test while it is in progress.



Settings~(Multiroom~Link)~: You can enjoy

sound through a remote speaker that is

connected to the home theater through your

home network. To use the network speaker,

select Multiroom. If there is a network

speaker available, it will appear on the screen.

don't~Use : The network speaker is not used.

Multiroom : The network speaker outputs

audio. All network speakers output the

same audio regardless of channel using the

PCM format only.

✎

SOUNd~EFFECT and 3d~SOUNd are not

applied if Multiroom is set to on.

✎

The network speaker is not available when

Screen~Mirroring is active.

✎

For further details, refer to the Multiroom

Link manual from the web site.

www.samsung.com > Support > Search for the

product name > Multiroom Link > Download PDF

Sound~Customizer

Sound Customizer lets you calibrate the home

theater for the optimal sound quality based on

your hearing level and the ambient conditions.

To create a Custom Sound Profile, follow these

steps:

1.~In the Sound~Customizer Menu, select Add~

Custom~Sound.

2.~On the next screen, select Start. The

preview screen appears.

3.~

Select preview to preview the Test Sound.

Select Next, and then press Ok to continue.

17 - English

Settings

4.~A 6-step test will start. During each stage,

the TV will sound a test tone at a different

frequency. The tone will begin softly and

increase in volume. Select yes when you

can hear the test tone. If you want to

listen to it again, select Retry. Each time

you select yes, the TV will move on to the

next tone. Once the test is complete, a

screen appears that lets you compare the

original sound to the calibrated sound.

5.~Select Next, and then press the

Ok button

to continue. The on-screen keyboard

appears with a default profile name.

6.~Enter a name for the calibrated sound

profile or accept the default name, select

done, and then press the

Ok button.

7.~Select done on the next screen, and

then press the

Ok button. The Sound~

Customizer screen reappears.



Custom~Sound~profile~: Select a Sound Profile

you created to activate it. Or select Hearing~

Impaired, a Custom Sound Profile especially

composed of large sounds for those with

hearing disorders.

✎

If there are more than 3 Custom Sounds

registered, Family mode will be activated

which is composed of the average value of all

registered profiles.



Add~Custom~Sound : Create and add a new

Custom~Sound~profile. See the instructions

above.



Edit~Custom~Sound~: Choose a Custom~Sound~

profile to modify it. Follow the same steps

you used when creating a sound profile. This

function is only available if you have added

a Custom~Sound~profile using Add~Custom~

Sound. (See above.)



Manage~Custom~Sound~: Rename or delete

Custom Sound Profiles. This function is only

available if you have added a Custom~Sound~

profile using Add~Custom~Sound. To select a

profile, highlight the check box to the right of

the profile, and then select Rename or delete.

Equalizer

Lets you configure the Equalizer settings

manually.

Smart~volume

Lets you set the product so that the volume

remains stable when a scene change occurs or

when you change the channel.

Audio~Return~Channel~(ARC)

Lets you direct the sound from the TV to the

Home Theater speakers. Requires an HDMI

connection and an Audio~Return~Channel (ARC)

compatible TV.

If Audio~Return~Channel is set to On and

you are using an HDMI cable to connect

the product to the TV, digital optical input is

disabled.

If Audio~Return~Channel is set to Auto and

you are using an HDMI cable to connect

the product to the TV, ARC or digital optical

input is selected automatically.

digital~Output

Lets you set the digital~Output to match the

capabilities of the AV receiver you’ve connected to

the product. For more details, please refer to the

digital output selection table. (See page 55)

dynamic~Range~Control

Lets you apply dynamic range control to Dolby

Digital, Dolby Digital Plus, and Dolby TrueHD

audio.



Auto: Automatically controls the dynamic

range of Dolby TrueHD audio, based on

information in the Dolby TrueHD soundtrack.

Also turns dynamic range control off for

Dolby Digital and Dolby Digital Plus.



Off: Leaves the dynamic range

uncompressed, letting you hear the original

sound.



On: Turns dynamic range control on for all

three Dolby formats. Quieter sounds are

made louder and the volume of loud sounds

is reduced.

downmixing~Mode

Lets you select the multi-channel downmix

method that is compatible with your stereo

system. You can choose to have the product

downmix to Normal~Stereo or to Surround~

Compatible.

Audio~Sync

When the product is attached to a digital TV,

lets you adjust the audio delay so that the

audio syncs with the video. You can set the

delay between 0 and 300 milliseconds.

✎

The Auto function in Audio~Sync is guaranteed

to work only with a Samsung TV that supports

the ARC function (the Anynet+ function).

18 - English

Settings

Network~

Network~Status

Lets you check the current network and

Internet status.

Network~Settings

Lets you configure the network connection so

you can enjoy various features such as Internet

services or AllShare Wi-Fi functionality, and

perform software upgrades.

Wi-Fi~direct

Lets you connect a Wi-Fi~direct device to the

product using a peer-to-peer network, without

the need for a wireless router. Note that if the

product is connected to a wireless network,

it may be disconnected when you use Wi-Fi~

direct. (See page 23)

✎

Text files, such as files with a .TXT or .DOC

extension, will not display when you are using

the Wi-Fi~direct function.

Multimedia~device~Settings

Allow other devices on your network, such as

smart phones and tablets, to share content with

your product.

device~Name

Lets you assign an identifying name to the

product. You use this name to identify the

product when you are connecting external Wi-

Fi devices (smart phones, tablets, etc.) to it.

Bd-Live~Settings

Lets you set various BD-Live functions. BD-Live

allows you to access extra features available on

some Blu-ray Discs if you are connected to the

Internet.



Bd-Live~Internet~Connection~: Lets you fully

allow, partly allow, or prohibit a BD-Live

Internet connection.



Bd~data~Management~: Manage BD data

downloaded from a BD-Live service or Blu-ray

Disc.

✎

To use BD-Live, you must insert a USB

storage device into the home theater's USB

port.

Smart~Hub

vOd~Rating~Lock

Lets you lock access to Video on Demand

(VOD) content based on its rating. To use, you

must enter the security PIN.

Press and hold the

123 button until the Num pad appears on the

screen. When the Num pad appears, select a

number using the

button and then press

the

button.

✎

The default security PIN is 0000.

✎

Depending on your country, this menu

function may not be supported.

Caption

Use to modify captions on VOD playback that

supports closed captions. Lets you change

displayed caption's font color and size.

✎

The Caption function does not work with

VOD services that don't support closed

captions. For some VOD services that do

support closed captions, the functions

settings may not be applied.

✎

Depending on your country, this menu

function may not be supported.

Terms~&~policy

Samsung~Account~Terms~and~Conditions,~

privacy~policy

You can view the terms of use and privacy

policy for Smart Hub, Samsung accounts, and

various other services

Reset~Smart~Hub

Resets all Smart Hub settings to their default

settings. To use, you must enter the security

PIN.

Press and hold the 123 button until the Num

pad appears on the screen. When the Num pad

appears, select a number using the

button and then press the

button.

✎

The default security PIN is 0000.

19 - English

Settings

System~

Setup

Lets you re-run the Initial Settings procedure.

Refer to the descriptions displayed on the screen.

Quick~Start

Lets you set the player to turn on quickly by

decreasing the boot time.

✎

If this function is set to On, Standby power

consumption will increase. (About 12W ~

20W)

Language

Lets you select the language you prefer for the

on-screen menu, disc menu, audio, subtitles, etc.

The language you select for the disc menu,

disc audio, or subtitles will only appear if it is

supported on the disc.

device~Manager

Lets you connect a wireless USB keyboard or

mouse to the USB port on the front of the

product.



keyboard~Settings: Lets you configure a wireless

USB keyboard connected to the product.

✎

You can use the keyboard only when a

QWERTy keyboard screen or window

appears in the Web Browser.



Mouse~Settings: Lets you configure a wireless

USB mouse connected to the product. You

can use the mouse in the product's menu in

the same way you use a mouse on your PC.

To use a mouse with the product's menu:

1.~Connect the USB mouse to the

product

2.~Click the primary button you selected

in Mouse~Settings. The Simple Menu

appears.

3.~Click the menu options you want.

✎

Some USB HID keyboards and mice may not

be compatible with your product.

✎

Some HID keyboard keys may not work.

✎

Wired USB keyboards are not supported.

✎

Some applications may not be supported.

✎

If a wireless HID Keyboard does not operate

because of interference, move the keyboard

closer to the

product.

Security

Press and hold the 123 button until the Num pad

appears on the screen. When the Num pad

appears, select a number using the

button and then press the

button.

The

default security PIN is 0000. Enter the default

PIN to access the security function if you

haven't created your own PIN.



Bd~parental~Rating:

Prevents playback of

Blu-ray Discs with a rating equal to or above

a specific age rating you have set unless you

enter the PIN.



dvd~parental~Rating: Prevents playback of

DVDs with a rating above a specific numerical

rating you have set unless you enter the PIN.



Change~pIN: Lets you change the 4-digit PIN

used to access security functions.

If you forget your PIN

1.~Remove any disc or USB storage device.

2.~Press and hold the

button on the front

panel for 5 seconds or more.

All settings will revert to the factory

default settings.

✎

When the factory default settings are restored,

all the user stored BD data is deleted.

General

Lets you specify the display brightness and time

zone.



Front~display:~Lets you change the brightness of

the front panel.



Time~Zone:~You can specify the time zone that

is applicable to your area.



Menu~Transparency:~Lets you adjust the

transparency of the menu box.

Anynet+~(HdMI-CEC)

Anynet+ is a convenient function that offers

linked operations with other Samsung products

that have the Anynet+ feature, and lets you

control those products with one Samsung TV

remote. To operate this function, you must

connect this product to an Anynet+ Samsung

TV using an HDMI cable.

To use an Anynet+~(HdMI-CEC) function,

follow the instructions below.

1) Connect the product to an Anynet+~

(HdMI-CEC)-compliant Samsung TV using

HDMI Cable.

20 - English

Settings

2) Set the Anynet+~(HdMI-CEC) feature to

On in both the TV and the product.

3) Search for and then select the product

in the TV's Anynet+~(HdMI-CEC) list. For

more exact instructions, see the Anynet+

section of the TV's user's manual.

Support

Remote~Management

When activated, lets Samsung Call Center

agents diagnose and fix problems with the

product remotely. Requires an active Internet

connection. Remote~Management service

might not be available in some countries.

Software~Update

For more information about the Software~

Update function, see "Upgrading Software" on

page 24.

Use~Mode

Lets you set the Use~Mode. If you are using the

home theater at home, always select Home~

Use. Store~demo is for retail display settings

only.

Contact~Samsung

Provides contact information for assistance

with your product.

Reset

Reverts all settings to their defaults except for

the network and Smart Hub settings. Requires

that you enter your security PIN.

Press and hold

the 123 button until the Num pad appears on the

screen. When the Num pad appears, select a

number using the

button and then press

the

button.

The default security PIN is 0000.

Network Setup

When you connect this product to a network,

you can use network based applications and

functions such as Smart Hub and BD-LIVE, and

upgrade the product's software through the

network connection. For more information about

accessing and using Internet services, see the

Network Services chapter of this manual on pages

41~48. Instructions for configuring the network

connection start below.

Configuring~your~Network~Connection

If you didn't configure your network connection

during the initial settings procedure or you need

to reset the network connection, follow the

directions below.

Before you begin, contact your Internet Service

Provider to find out if your IP address is static or

dynamic. If it is dynamic, and you have a wired

or wireless network, we recommend using the

Automatic configuration procedures described

below.

If you are connecting to a wired network, connect

the product to your router using a LAN cable

before you start the configuration procedure.

To begin configuring your network connection,

follow these steps:

1.~In the Home screen, select Settings, and then

press the

Ok button.

2.~Select Network, and then press the

button.

3.~Select Network~Settings, and then press the

Ok button.

4.~Go to the instructions for Wired networks

starting below or the instructions for Wireless

networks starting on page 21.

Wired~Network

Wired~–~Automatic

After following Steps 1 to 3 above:

1.~In the Network~Settings screen, change

Network~type to Wired. Then, select Connect

and press the

Ok button. The product

detects the wired connection, verifies the

network connection, and then connects to

the network.

2.~When it is done, highlight Ok, and then

press Ok button.

21 - English

Settings

Wired~-~Manual

If you have a static IP address or the automatic

procedure does not work, you'll need to set the

Network~Settings values manually.

After following Steps 1 to 3 above:

1.~In the Network~Settings screen, change

Network~type to Wired. Then, select Connect

and press the

Ok button.

The product searches for a network, and

then displays the connection failed message.

✎

If it is possible to connect the home theater

to your network wirelessly, select Change~

Network at this point, change the Network~

type to Wireless, and then go to the

instructions for wireless networks on this

page.

Network~Settings

Wired~network~connection~failed.

MAC~Addressxx:xx:xx:xx:xx:xx

Ip~Address~~~0.~~~0.~~~0.~~~0

Subnet~Mask~~~0.~~~0.~~~0.~~~0

Gateway~~~0.~~~0.~~~0.~~~0

dNS~Server~~~0.~~~0.~~~0.~~~0

Unable~to~connect~to~the~network.~Try~the~following:~check~if~your~Ip~address~is~set~~

correctly~in~Ip~Settings.~Contact~your~Internet~Service~provider~for~more~information.

Change~NetworkIp~SettingsRetryClose

2.~Use the

buttons to select Ip~Settings,

and then press the Ok button. The Ip~Settings

screen appears.

3.~Select the Ip~Setting field, and then set it to

Enter~manually.

4.~Select a parameter to enter (Ip~Address, for

example), and then press Ok. Use the

buttons on the remote control to enter the

numbers for the parameter.

Or use the Num

keypad to enter a parameter number.

Press and

hold the 123 button until the Num pad appears

on the screen. When the Num pad appears,

select a number using the

button and

then press the

button.

Use the

buttons on the remote control to move from

entry field to entry field within a parameter.

When done with one parameter, press the

Ok button.

5.~Press the

button to move to another

parameter, and then enter the numbers for

that parameter following the instructions in

Step 4.

6.~Repeat Steps 4 and 5 until you have filled in

all parameters.

✎

You can get the network parameter values

from your Internet provider.

7.~When finished entering all the parameter

values, select Ok, and then press the

button. The home theater verifies the

network connection and then connects to

the network.

Wireless~Network

You can set up a wireless network connection in

three ways:

Wireless Automatic

Wireless Manual

WPS(PBC)

Before you configure the wireless network

connection, disconnect any wireless network

devices currently connected to the product

or, if applicable, the product's current wired

connection.

Wireless~-~Automatic

After following Steps 1 to 3 in "Configuring Your

Network Connection" on page 20:

1.~In the Network~Settings screen, change

Network~type to Wireless. The product

searches for and then displays a list of the

available networks.

Network~Settings

Select~your~network~type.

Network~type~Wireless

Wireless~network

si-ap

iptime

kIMING_vTOWER

you~can~connect~your~Blu-~

ray~player~to~the~internet.

please~select~which~wireless~~

network~to~use.

RefreshWpS(pBC)

2.~Select the desired network, and then press

the

Ok button.

3.~On the Security screen, enter your network's

security code or pass phrase.

Enter letters by selecting a letter with

buttons, and then pressing Ok button.

4.~When finished, select done, and then press

the

Ok button. The product verifies the

network connection and then connects to

the network.

22 - English

Settings

✎

You should be able to find the security code or

pass phrase on one of the set up screens you

used to set up your router or modem.

Wireless~-~Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your

Network Connection" on page 20:

1.~In the Network~Settings screen, change

Network~type to Wireless. The product

searches for and then displays a list of the

available networks.

2.~Scroll through the list, select the desired

network or Add~Network, and then press the

Ok button.

3.~If you selected a network in Step 2, go to

Step 6.

If you selected Add~Network, go to Step 4.

4.~Enter your wireless network or wireless

router's name.

Enter letters by selecting a letter with the

buttons, and then pressing the

Ok button.

To display capital letters (or redisplay lower

case letters if capital letters are displayed),

select

, and then press the Ok button.

To display symbols and punctuation, select

123#&, and then press the

Ok button. To

redisplay letters, select 123#&, and then

press the Ok button.

When finished, select done, and then press

the

Ok button.

5.~On the Security~type screen that appears,

use the

buttons to select the network's

Security~type, and then press the

Ok button.

On the next screen, enter your network's

security code or pass phrase.

Enter letters by selecting a letter with the

buttons, and then pressing the

Ok button.

When finished, select done, and then press

the

Ok button. The product searches for the

network.

6.~The Network connection fail screen appears.

Use

buttons to select Ip~Settings, and

then press the Ok button.

7.~Select the Ip~Setting field, and then set it to

Enter~manually.

8.~Select a network parameter to enter (Ip~

Address, for example), and then press

button. Use the

buttons on the remote

control to enter the numbers for the

parameter.

Or use the Num keypad to enter a

parameter number.

Press and hold the 123

button until the Num pad appears on the

screen. When the Num pad appears, select a

number using the

button and then

press the

button.

Use the buttons on

the remote control to move from entry field

to entry field within a parameter. When done

with one value, press the Ok button.

9.~Press the

button to move to another

parameter, and then enter the numbers for

that parameter following the instructions in

Step 8.

10.~Repeat Steps 8 and 9 until you have filled in

all parameters.

✎

You can get the Network parameter values

from your Internet provider.

11.~When finished, select Ok, and then press the

Ok button. The Security screen appears.

12.~On the Security screen, enter your network's

security code or pass phrase. Enter letters by

selecting a letter with the

buttons,

and then pressing the Ok button.

13.~When finished, select done at the right of

the screen, and then press the

Ok button.

The product verifies the network connection

and then connects to the network.

14.~After the home theater verifies the network,

select Ok, and then press the

Ok button.

✎

You can also begin the Manual Network setup

by going to Settings~>~Network~>~Network~

Status.

WpS(pBC)

One of the easiest ways to set up the wireless

network connection is using the WpS(pBC)

function. If your wireless router has a WPS(PBC)

button, follow these steps:

After following Steps 1 to 3 in "Configuring Your

Network Connection" on page 20:

1.~In the Network~Settings screen, change

Network~type to Wireless. The product

searches for and then displays a list of the

available networks.

23 - English

Settings

2.~Scroll the list down, select WpS(pBC), and

then press the

Ok button.

3.~Press the WpS(pBC) button on your

router within two minutes. Your product

automatically acquires all the network

settings values it needs and connects to your

network after the network connection is

verified.

4.~When it is done, highlight Ok, and then

press the

Ok button.

✎

For a WPS connection, set your wireless

router’s security encryption to AES. WEP

security encryption does not support a WPS

connection.

Wi-Fi Direct

The Wi-Fi~direct function allows you to connect

Wi-Fi~direct devices to the product and each other

using a peer-to-peer network, without a wireless

router.

✎

Some Wi-Fi~direct devices may not support

the AllShare function if connected via Wi-Fi~

direct. If this is the case, change the network

connection method you used to connect the

device to the home theater.

✎

Wi-Fi~direct transmissions can interfere

with Bluetooth signals. Before you use the

Bluetooth function, we strongly recommend

that you turn off the Wi-Fi~direct function on

any device in which it is currently on.

1.~Turn on the Wi-Fi~direct device and activate

its Wi-Fi~direct function.

2.~In the Home screen, select Settings, and then

press the

Ok button.

3.~Select Network, and then press the

button.

4.~Select Wi-Fi~direct, and then press the

button.

The Wi-Fi~direct devices that you can connect

the home theater to appear.

Refresh

Wi-Fi~direct

device~Name~:~[HTS]H6500WM

Select~your~Wi-Fi~direct~device~to~connect~to.

AndroidXXXXXXXDisconnected

Settings

5.~You have three ways to complete the Wi-Fi

connection:

Through the Wi-Fi device.

Through the product using PBC.

Through the product using a PIN.

Each is covered below.

Through~the~Wi-Fi~device

1.~On the Wi-Fi device, follow the device's

procedure for connecting to another Wi-Fi~

direct device. See the device's user manual

for instructions.

2.~When you have completed the procedure,

you should see a pop-up on your TV screen

saying that a device that supports Wi-Fi~

direct has requested to connect. Select Ok,

and then press the Ok button to accept.

3.~The Connecting pop-up appears, followed

by the Connected pop-up. When it closes,

you should see the device listed on the Wi-Fi~

direct screen as connected.

The PBC and PIN procedures connect devices

automatically.

Through~the~product~Using~pBC

1.~Select the Wi-Fi~direct device you want to

connect to this product, and then press the

Ok button.

2.~The Connecting pop-up appears, followed

by the Connected pop-up. When it closes,

you should see the device listed on the Wi-Fi~

direct screen as connected.

Through~the~product~Using~a~pIN

1.~Select the Wi-Fi~direct device you want to

connect to this product, and then press the

Ok button.

2.~The PIN pop-up appears.

3.~Note the PIN code in the pop-up, and then

enter it into the appropriate field in the Wi-Fi~

direct device you want to connect.

4.~The Connecting pop-up appears, followed

by the Connected pop-up. When it closes,

you should see the device listed on the Wi-Fi~

direct screen as connected.

✎

The current wired or wireless network

connection will be disconnected when you use

the Wi-Fi~direct function.

24 - English

Settings

✎

Text files, such as files with a .TXT or .DOC

extension, will not display when you are using

the Wi-Fi~direct function.

Upgrading Software

The Software~Update menu allows you to

upgrade the product’s software for performance

improvements or additional services.

Never turn the product off or back on

manually during the update process.

1.~In the Home menu, select Settings, and then

press the

Ok button.

2.~Select Support, and then press the

button.

3.~Select Software~Update, and then press the

Ok button.

4.~To download update software and update

now, select Update~now, and then press the

Ok button. See "Update now" on this page

for details.

5.~To let the product download update software

automatically when available, select Auto~

Update, and then press the

Ok button. (See

page 24)

✎

The upgrade is complete when the product

turns off, and then turns on again by itself.

✎

Samsung Electronics takes no legal

responsibility for product malfunction

caused by an unstable Internet connection

or consumer negligence during a software

upgrade.

✎

If you want to cancel the upgrade while the

upgrade software is downloading, press the

Ok button.

✎

When a system upgrade is in progress,

"UPDATE" is displayed on the front panel.

Update~now

You can use Update~now to update the software

through your network connection or by using

a USB flash drive. The network instructions are

below. The USB flash drive instructions are on the

next page.

1.~Select Update~now, and then press the Ok

button.The Update now pop-up appears.

2.~The product searches on line for the latest

software version.

3.~If it does not find an update, the "There are

no new updates for you at the moment."

pop-up appears. Press the Ok button to exit.

4.~If it finds a new version, the Update Request

pop-up appears.

5.~Select Ok. The product upgrades the

software, turns off, and then turns on

automatically.

6.~If you do not select Ok or Cancel in one

minute, the product stores the new upgrade

software. You can upgrade the software later

using Auto~Update.

7.~If you select Cancel, the product cancels the

upgrade.

✎

When the system upgrade is done, check the

software details in the Product Information

section of the Contact Samsung screen.

✎

Do not turn off the product during the

Software Upgrade. It may cause the product

to malfunction.

Auto~Update

You can set the Auto~Update function so that the

product downloads new upgrade software when

it is in Auto~Update mode.

In Auto~Update mode, the product is on, but

its Internet connection is active. This allows

the product to download upgrade software

automatically, when you are not using it.

1.~Press the

buttons to select Auto~Update~

mode, and then press the Ok button.

2.~Select On or Off.

If you select On, the product will

automatically download new upgrade

software when it is in Auto Update mode

with the power on. If it downloads new

upgrade software, the product will ask you

if you want to install it when you turn the

product on.

✎

To use the Auto~Update function, your product

must be connected to the Internet.

25 - English

Settings

Update~by~USB

1.~Visit www.samsung.com.

2.~Click SUppORT on the top right of the page.

3.~Enter the product's model number into the

search field. As you enter the model number,

a drop down will display products that match

the model number.

4.~Left click your product's model number in the

drop down list.

5.~On the page that appears, scroll down to and

then click Firmware~Manuals~&~downloads.

6.~Click Firmware in the center of the page.

7.~Click the ZIp button in the File column on the

right side of the page.

8.~Click Send in the first pop-up that appears.

Click Ok in the second pop-up to download

and save the firmware file to your PC.

9.~Unzip the zip archive to your computer. You

should have a single folder with the same

name as the zip file.

10.~Copy the folder to a USB flash drive.

11.~Make sure no disc is inserted in the product,

and then insert the USB flash drive into the

USB port of the product.

12.~In the product’s menu, go to Settings~>~

Support~>~Software~Update.

13.~Select Update~now.

14.~The product searches for the software on the

USB drive. When it finds the software, the

Update Request pop-up appears.

15.~Select Ok. The product upgrades the

software, turns off, and then turns on

automatically.

✎

There should be no disc in the product when

you upgrade the software using the USB jack.

✎

When the system upgrade is done, check the

software details in the Product Information

section of the Contact Samsung screen.

✎

Do not turn off the product during the

software upgrade. It may cause the product to

malfunction.

✎

Software upgrades using the USB jack must

be performed with a USB flash drive only.

26 - English

Playing Content

Your home theater can play content located on

Blu-ray/DVD/CD discs, USB devices, PCs, smart

phones, tablets, and on the Web.

To play content located on your PC or a mobile

device, you must connect the PC or mobile device

and the product to your network. To play content

on your PC, you must also download and install

AllShare network software or already have DLNA

network software on your PC.

✎

PCs running Windows 7 and Windows 8 have

DLNA software (Play To) built in.

Playing Commercial Discs

1.~Press the

button to open the disc tray.

2.~Place a disc gently into the disc tray with the

disc’s label facing up.

3.~Press the

button to close the disc tray.

Playback starts automatically.

4.~If playback does not start automatically, press

the

button on the remote.

disc~Storage~&~Management

Holding Discs

Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping.

Avoid touching the surface of a disc where

data has been recorded.

Hold the disc by the edges so that fingerprints

will not get on the surface.

Do not stick paper or tape on the disc.

Cleaning Discs

If you get fingerprints or dirt

on a disc, clean it with a mild

detergent diluted in water and

wipe with a soft cloth.

When cleaning, wipe gently from the inside

to the outside of the disc.

Disc Storage

Do not keep in direct sunlight.

Keep in a cool ventilated area.

Keep in a clean protective jacket and

store vertically.

Playing Multimedia Files

1.~In the Home screen, select MULTIMEdIA,

and then press the Ok button. The Recently

Played screen appears.

2.~Select Storage, Network~device,~or Storage~

Service at the bottom of the screen.

Storage - Displays storage devices

connected to the product.

Network~device - Displays mobile devices,

PCs, tablets, and similar devices connected

through the network.

Storage~Service - Displays the cloud

services you are logged in to.

✎

When you select an item, information about

the item scrolls across the bottom of the item's

listing window.

3.~Select an item or device, and then press

the

Ok button. A screen appears listing the

contents of the item or device. Depending

on how the contents are arranged, you will

see either folders, individual files, or both.

4.~If necessary, use the

buttons to

select a folder, and then press the Ok button.

5.~Use the

buttons to select a file to

view or play, and then press the Ok button.

6.~The selected file plays.

7.~Press the

(RETURN) button to exit a folder

or the

(ExIT) button to return to the

Home screen.

8.~Go to pages 28~39 for instructions that

explain how to control playback of videos,

music, and pictures on a storage device.

✎

To list only one type of media file, use the

Filter(

) function in the top-right corner of

the item or device screen.

✎

In the Filter(

) drop down, select photos,

videos, or Music.

✎

Even though the product will display folders

that contain all content types, it will only

display files of the content type you selected

For example, if you selected Music, you will

only be able to see music files.

27 - English

playing~Content

playing~Files~on~a~Storage~device~

Method~1~:~If~the~product~is~turned~on~after~

you

connect~a~storage~device

1.~Turn the product on.

2.~Follow the directions in “Playing Multimedia

Files” on page 26. In Step 2, select

Storage.

Method~2~:~If~you~connect~a~USB~device~while

the~product~is~turned~on

1.~Connect the storage device to the product.

(a recorded CD, a USB device, etc.) The "New~

device~connected." pop-up appears. If two or

more storage devices are connected, use the

buttons to switch between devices.

PLAY DISC

App 1 App 2 App 3 App 4 App 5 App 6

Screen Mirroring

FunctionSettings

MOVIES & TV SHOWS

MULTIMEDIA

SAMSUNG APPS

No Disc

RECOMMENDEDMY APPS

New device connected.

USB Flash Disk

All Content

Photos

Videos

Music

✎

If the pop-up does not appear, go to Method

2.~Use the

buttons to select All~Content,~

photos,~videos, or Music, and then press the

Ok button. Depending on how the contents

are arranged, you will see either folders,

individual files, or both.

✎

To list only one type of media file, use the

Filter(

) function in the top-right corner of

the item or device screen.

✎

In the Filter(

) drop down, select photos,

videos, or Music.

✎

Even though the product will display folders

that contain all content types, it will only

display files of the content type you selected

For example, if you selected Music, you will

only be able to see music files.

3.~If necessary, use the

buttons to

select a folder, and then press the Ok button.

4.~Select a file to view or play, and then press

the Ok button.

5.~Press the

(

RETURN) button to exit a folder

or the

(ExIT) button to return to the

Home screen.

6.~Go to pages 28~39 for instructions that

explain how to control playback of videos,

music, and pictures on a storage device.

✎

If you insert a disc when playing a USB device

or phone, the device mode changes to "Disc"

automatically.

✎

If your cellular phone is DLNA compatible, you

can play contents without connecting a USB

cable.

playing~Media~Content~Saved~on~a~

Computer/Mobile~device

You can play media content on the Home theater

that is stored on a computer or mobile device

connected to the same network as the Home

theater.

✎

Samsung Link software must be installed on

the computer that contains the content you

want to play on the Home theater. The mobile

device must support Samsung Link. For more

information, visit Samsung’s content and

service portal at http://link.samsung.com.

✎

You may experience compatibility issues when

attempting to play media files via a third-party

DLNA server.

✎

The content shared by a computer or a

mobile device may not play depending on the

encoding type and file format of the content.

In addition, some functions may not be

available.

✎

The media content may not play smoothly

depending on the network status. If this

occurs, use a USB storage device.

1.~In the Home screen, select MULTIMEdIA, and

then press the

Ok button.

2.~Select Network~device at the bottom of

the screen, and then press the

Ok button.

Storages devices connected to the same

network as the Home theater are listed.

3.~Select a storage device, and then press the

Ok button. The folders and files shared by

the selected storage device are listed.

4.~If necessary, use the

buttons to

select a folder, and then press the Ok button.

28 - English

Playing Content

5.~Select a file to view or play, and then press

the Ok button.

6.~

Press the

(RETURN) button to exit a folder

or the

(ExIT) button to return to the Home

screen.

7.~Go to pages 28~39 for instructions that

explain how to control playback of videos,

music, and pictures on a storage device.

✎

To list only one type of media file, use the

Filter(

) function in the top-right corner of

the item or device screen.

✎

In the Filter(

) drop down, select photos,

videos, or Music.

✎

Even though the product will display folders

that contain all content types, it will only

display files of the content type you selected

For example, if you selected Music, you will

only be able to see music files.

✎

Alternatively, move to the media content

to play and press the

Ok button to play the

content.

playing~Media~Content~Saved~in~a~

Cloud~Service

Dropbox and SkyDrive and other cloud services

save user content such as photos, videos,

and music files on a remote server accessible

through the Internet. When your home theater

is connected to the Internet, you can view or

play the media content saved in a cloud service

through the home theater.

✎

To play the content in a cloud service, you

must log into your Samsung account and link

the Samsung account to the cloud service

account. For the information about linking

your Samsung account to a cloud service

account, refer to the "Logging In to Your

Samsung Account" section.

1.~In the Home screen, move to MULTIMEdIA

and press

Ok button.

2.~Select Storage~Service at the bottom of the

screen.

3.~The cloud services linked with your Samsung

account appear.

4.~Select a cloud service. The folders and files in

the selected cloud service are listed.

5.~If necessary, use the

buttons to

select a folder, and then press the Ok button.

6.~Select a file to view or play, and then press

the

Ok button.

7.~

Press the

(RETURN) button to exit a folder

or the

(ExIT) button to return to the Home

screen.

8.~Go to pages 28~39 for instructions that

explain how to control playback of videos,

music, and pictures located in a Storage~

Service.

Controlling Video Playback

You can control the playback of video content

located on a Blu-ray/DVD disc, USB device, mobile

device, or PC. Depending on the disc or contents,

some of the functions described in this manual

may not be available.

Buttons~on~the~Remote~Control~used~

for~video~playback

~~Using~the~disc~menu,~title~menu,~popup~

menu,~and~title~list

dISC~MENU

During playback, press this button to display

the Disc menu.

TITLE~MENU

During playback, press this button to display

the Title menu or Popup menu.

If your disc has a playlist, press the Sort~By

button to go to the playlist.

~~playback~related~buttons

The product does not play sound in Search, or

Slow mode.

To return to normal speed playback, press the

button.

29 - English

playing~Content

Starts/Pauses playback.

(

ExIT)

Stops playback.

Fast~

Motion~

play

During playback, press and hold

the

[

]

button.

Each time you press and hold

the

[

]

button, the

playback speed will change.

Slow~

Motion~

play

In pause mode, press and hold

the

]

button.

Each time you press and hold

the

]

button, the playback

speed will change.

Skip~

Motion~

play

During playback, press the

[

]

button.

Each time you press the

[

]

button, the disc moves to

the previous or next chapter or

file.

Using~the~TOOLS~Menu

Commercial~discs

During playback, press the TOOLS button.

File-based~video

During playback, press the TOOLS button.

Use the

buttons to select Settings(

) in the

upper right corner, and then press the Ok button.

play~from~the~Beginning

Select to return to the beginning of the movie,

and then press the

Ok button.

3d~

Use 3d menu to select the Side~by~Side or

Top~Bottom

option if the 3D content currently

playing does not appear properly in 3D mode.

✎

Use 3d menu for 3D content only. If you

apply the

Side~by~Side

or Top~Bottom format

to 2D content, it will not be displayed

properly.

Select~Scene

You can use the Select~Scene function during

playback to view or start a movie from the

scene of your choice.

✎

If the index information in the file is

damaged or the file does not support

indexing, you will not be able to use the

Select Scene function.

✎

If you are using the DLNA function after

connecting to a computer through

your network, Select Scene may not be

supported.



Search~Titles~:~

If there is more than one

movie on the disc or device, select to start a

different title.

1.~Select Search~Titles, and then press the

Ok button.

2.~Use the

buttons to select a title,

and then press the

Ok button.



Search~Chapters~:~

Select to play the chapter of

your choice.

1.~Select Search~Chapters, and then press

the

Ok button.

2.~Use the

buttons to select a chapter,

and then press the

Ok button.



Search~Time~bar~:~

Select to play the movie

from a selected time point.

1.~Select Search~Time~bar, and then press

the

Ok button.

2.~Press and hold the 123 button until the

Num pad appears on the screen. When

the Num pad appears, select a number

using the

button and then

press the

Ok button.

✎

You can also

use the buttons to

advance or rewind the movie. The movie

advances or rewinds one minute each time

you press the

buttons.

Repeat~Mode

Lets you repeat a title, chapter, or specific

section.

Off : Select to return to normal playback.

Title : Choose to repeat a selected title.

Chapter : Choose to repeat a specific chapter.

Repeat~A-B : Choose to repeat a specific

section.

1.~Press the

Ok button at the point where

you want repeat play to start (A).

2.~Press the

Ok button at the point where

you want repeat play to stop (B).

30 - English

Playing Content

✎

Depending on the disc, the screen may not

display all repeat options.

✎

Off, Repeat~One, and Repeat~All appear

only when you play a video recorded as a

digital file.

✎

The screen may not display Chapter or

Title immediately. Continue to press the

buttons until your choice is inside the

applicable field.

✎

The screen may not display Repeat~A-B

immediately. Continue to press the

buttons until Repeat~A-B is inside the

applicable field.

✎

You must set point (B) at least 5 seconds of

playing time after point (A).

picture~Mode

Lets you set the picture~Mode.

dynamic : Increases sharpness and

brightness.

Standard : Choose this setting for most

viewing applications.

Movie : The best setting for watching movies.

User : Lets you adjust the sharpness and

noise reduction function respectively.

✎

When you use the Bd~Wise function, this

menu will not appear.

Equalizer~Mode

Set Equalizer Mode on to use the equalizer.

Equalizer~Settings

Lets you set the equalizer.

✎

Equalizer Settings only appears when Equalizer~

Mode is On.

Audio

Select to set the desired audio language.

Audio~Sync

In some cases when the product is connected

to a digital TV, the audio signal may not

synchronize with the video signal. If this occurs,

use Audio Sync to adjust the audio delay time

to match the video signal.

Subtitle

Lets you set the desired subtitle language.

Subtitle~Settings~

Lets you set the desired subtitle options.

Angle

To view a scene from another angle. The Angle

option displays the number of angles available

to view (1/1, 1/2, 1/3, etc.).

BONUSvIEW~videoBONUSvIEW~Audio

Lets you set the desired Bonusview option.

Rotate

You can rotate the screen clockwise or

counterclockwise by 90 degrees.

Full~Screen

Lets you set the size of the video image.

Choose Original, Mode1 (larger), or Mode2

(largest).

Information~

Select to view video file information.

✎

Depending on the disc or storage device, the

Tools menu may differ.

✎

Video files with high bitrates of 20Mbps or

more strain the product’s capabilities and may

stop playing during playback.

31 - English

playing~Content

Using~the~Sort~By~&~Options~Menus

Select the Filter(

) function, and then videos to

display videos only.

✎

Even though the product will display folders

that contain all content types, it will only

display files of the content type you selected

For example, if you selected videos, you will

only be able to see video files.

On the screen that lists the video files, use the

buttons to select Sort~By or Options in

the upper right, and then press the

Ok button.

videos

Sort~By

date

Displays all the folders with videos by date. If

you select a folder, and then press Ok button,

displays all the video files in the folder by date.

Title~

Displays all the video files on the media or

storage device by title.

Folder

Displays all the folders on the media or

storage device.

Options

play~Selected~

play~Selected lets you create a playlist by

selecting specific files to play. It works

essentially the same way for all media. See

"Using Play Selected with a Commercial CD"

on page 34.

Send

Select Send to upload selected files to on-line

sites (Picasa, Facebook, etc.) or to devices.To

use Send~with~an~on-line~site, you need to

establish an account with the on-line site,

and then log in using the Log In function.

Send works essentially the same way for

music, photos, and videos. For general

instructions, see "Using the Send Function"

on page 39.

✎

Depending on the disc or storage device, the

Options~and~Sort~By~menus~may~differ. All

options may not be displayed.

✎

The Sort~By and Options menus are usually

available when you are viewing video files on

a USB flash drive, a PC, a disc you recorded

yourself, or a mobile device. They are usually

not available if you are viewing a commercial

Blu-ray, DVD, or CD disc.

Controlling Music Playback

You can control the playback of music content

located on a DVD, CD, USB, mobile device, or PC.

Depending on the disc or contents, some of the

functions described in this manual may not be

available.

Buttons~on~the~Remote~Control~used~

for~Music~playback

[

]

buttons : Move to the previous/

next track.

(

ExIT) button : Stops a track.

Fast~play~(Audio~Cd~[Cd-dA]~only)

During playback, press and hold the

[

]

button.

Each time you press and hold the

[

]

button, the playback speed will

change.

button : Plays/Pauses a track.

32 - English

Playing Content

Music~Screen~Controls

00:00/00:00

TRACK 001 00:43

TRACK 002 03:56

TRACK 003 04:41

TRACK 004 04:02

TRACK 005 03:43

TRACK 006 03:40

TRACK 007 04:06

TRACK 008 03:52

TRACK 009 03:04

TRACK 010 04:02

TRACK 001

The Track List screen appears initially, and the

first track begins to play. If you are playing a

commercially recorded disk and don't press a

button on the remote momentarily, the Playback

screen appears. To return to the Track List screen,

press the

(RETURN) button.



00:00:40 00:03:35

TRACK 001

On the Track List screen, use

buttons to

move the highlight to the track you want. Press

the Ok button to play the track.

On~Screen~Music~Controls

Pause a track.

Play a track.

Move to the previous track.

Move to the next track.

Rewind the track.

Advance the track.

Repeat one track or all tracks.

Play tracks in random order.

Display the Equalizer.

On the

Music List

screen only.



Equalizer~Settings~: Adjust the

equalizer manually. (Available

only when Equalizer~Mode is on)



play~Selected~:

play~Selected

lets

you select specific files to play.

It works essentially the same

way for all media. See "Using

Play Selected with Self-Recorded

Media (CDs, USB Devices, etc.)"

on page



Ripping~:

The Ripping function

converts CD audio to the

mp3 format and saves the

converted files on a USB device

or a mobile device connected

to the product. See Ripping on

page 36.



Information~:

Shows the track

information.

To access the controls, play a track, and then use

the

buttons to move to the control of

your choice.

✎

The music screen controls are only accessible

when a track is playing.

✎

All controls do not appear at the same time.

✎

For file-based contents, the available Settings~

(

) options will differ.

Using~the~Sort~By~&~Options~Menus

Select the Filter(

) function, and then Music to

display music files only.

✎

Even though the product will display folders

that contain all content types, it will only

display files of the content type you selected

For example, if you selected Music, you will

only be able to see music files.

On the screen that lists the music files, use the

buttons to select Sort~By or Options in

the upper right, and then press the Ok button.

33 - English

playing~Content

Music

Sort~By

Track

Displays all the music tracks on the media or

storage device.

Album

Displays all the music on the media or

storage device by album.

Artist

Displays all the music files on the media or

storage device by artist

Genre

Displays all music on the media or storage

device by genre.

Folder

Displays all the folders on the media or storage

device.

Options

play~Selected~

play~Selected lets you select specific files to

play. It works essentially the same way for

all media. See "Using Play Selected with a

Commercial CD" on page 34 and "Using

Play Selected with Self-Recorded Media (CDs,

USB Devices, etc.) on page 34.

Send~

Select Send to upload selected files to on line

sites (Picasa, Facebook, etc.) or to devices.

To use Send with an on line site, you need

to establish an account with the on-line site,

and then log in using the Log In function.

Send works essentially the same way for

music, photos, and videos. For general

instructions, see "Using the Send Function"

on page 39.

Encoding

Select to manage the text encoding options.

Rename~playlist

Lets you modify the name of a playlist.

delete~playlist

Lets you delete a playlist.

Add~to~playlist

Lets you add additional files to a playlist.

✎

Depending on the disc or storage device, the

Options menu may differ. All options may not

be displayed.

✎

Rename~playlist and delete~playlist appear only

if a playlist exists.

Repeating~Tracks~on~an~Audio~Cd

You can set the product to repeat tracks on an

audio CD (CD-DA/MP3).

1.~On the Track List screen during playback, use

the

buttons to select in the

lower left corner of the screen, and then

press the Ok button.

2.~Use the

to select the Repeat mode you

want - Off, One~Song, or All - and then press

the

Ok button.

00:00/00:00

TRACK 001 00:43

TRACK 002 03:56

TRACK 003 04:41

TRACK 004 04:02

TRACK 005 03:43

TRACK 006 03:40

TRACK 007 04:06

TRACK 008 03:52

TRACK 009 03:04

TRACK 010 04:02

TRACK 001

Track~List~screen



00:00:40 00:03:35

TRACK 001

playback~screen

Press the

(

RETURN) button on the remote to

return to the Track List screen.

34 - English

Playing Content

Shuffling~Tracks~on~an~Audio~Cd

You can set the product to play tracks on an audio

CD (CD-DA/MP3) at random.

1.~During playback, use the

buttons to

select in the lower left corner of the

screen, and then press the Ok button.

2.~Use the

to set the Shuffle mode Off or

On, and then press the

Ok button.

Using~play~Selected~with~a~Commercial~

1.~On the Track List screen, select Settings~(

) on the bottom left, and then press the Ok

button. The Settings~menu appears.

2.~Select play~Selected, and then press the

button. The play~Selected screen appears.

3.~Use the

buttons to select a track, and

then press the

Ok button. A check appears

to the left of the track.

4.~Repeat Step 3 to select and check additional

tracks.

5.~To remove a track from the list, move to the

track, and then press the Ok button again.

The check on the track is removed.

6.~When done, select play on the bottom

left, and then press the

Ok button. The

Track List screen reappears listing only the

tracks you checked. The selected tracks play

automatically.

7.~To cancel the play~Selected list, select Settings~

(

) on the bottom left of the Track list

screen. On the Settings menu select play~all~

list. The Track List screen reappears with all

tracks on the CD listed.

✎

You can select up to 99 tracks from an Audio

CD (CD-DA) using Play Selected.

✎

On the play~Selected screen, you can also

choose Select~All, deselect~All, and Cancel.

- Use Select~All to select all tracks. This cancels

your individual track selections. When you

press the

(

RETURN) button on your remote

or select play and then press the Ok button,

all tracks will appear on the Track List screen,

and the product will begin to play all tracks

from Track 001.

- Use deselect~All to deselect all selected

tracks at once. Then, select individual tracks

or use Select~All to select all the tracks, and

then press the

(RETURN) button on your

remote or select play and then press the Ok

button. If you do not use Select~All or select

individual tracks, the play~Selected list will

not change.

- Cancel cancels any changes you made on the

play~Selected screen. When you return to the

Track List screen, the play~Selected list will be

unchanged.

Using~play~Selected~with~Self-Recorded~

Media~(Cds,~USB~devices,~etc.)

1.~Insert a self-recorded CD or USB device with

self-recorded files into the home theater. The

New~device~connected. pop-up appears.

2.~Select Music, and then press the

Ok button

on your remote. The File List screen appears

displaying icons for tracks, folders, or both.

3.~If necessary, use the

buttons to

select a folder, and then press the Ok button.

4.~When the tracks you want to play are

displayed, select Options in the upper right,

and then press the

Ok button.

5.~Select play~Selected, and then press the

button. Check boxes appear on the upper

left sides of the track icons.

6.~Use the

buttons to select a track,

and then press the Ok button. A check

appears in the check box.

7.~Repeat Step 6 to check and select additional

tracks.

8.~To remove a track from the list, move to the

track, and then press the Ok button again.

The check on the track is removed.

9.~When done, select play, and then press the

Ok button. The Track List screen appears

listing only the tracks you checked. The

selected tracks play automatically.

10.~To cancel the play~Selected list, press the

(

RETURN) button or the

(

ExIT) button. If

you press

(

RETURN), you return to the File

List screen. If you press

(

ExIT), you go to

the Home screen.

✎

If you want to use play~Selected to watch

videos, use the Filter(

) function to select

videos instead of Music.

35 - English

playing~Content

Using~play~Selected~Starting~from~the~

Home~Screen

✎

Select pLAy~dISC or MULTIMEdIA depending

on the media you are using.

- If you selected pLAy~dISC, the Track List

screen appears. Use the Filter(

) function

to select Music, and then follow the

directions starting at Step 3 above.

- If you selected MULTIMEdIA, select Storage

or Network~device on the MULTIMEdIA

screen. Then, select your storage media on

the Storage screen or device on the Network~

device screen. The File List screen appears.

Use the Filter(

) function to select Music,

and then follow the directions starting at

Step 3 above.

Creating~and~Editing~a~playlist~Stored~in~

a~Storage~device

Creating~a~playlist

1.~Connect a USB device with stored music to

the home theater's USB jack, and then turn

on the home theater.

2.~On the Home screen, select MULTIMEdIA,

and then press the

Ok button.

3.~On the MULTIMEdIA screen, select Storage,

and then press the

Ok button.

4.~Select the USB device, and then press the

button.

5.~At the top of the screen, select Filter(

)

;

Music.

6.~After the screen re-displays, select Options

(

)

;

Add~to~playlist.

7.~On the next screen, select an existing playlist,

and then press the

Ok button.

Select New~playlist, and then press the Ok

button. If you selected an existing playlist, go

to Step 9. If you selected New~playlist, go to

Step 8.

8.~On the on-screen keyboard, accept the

default name for the new playlist or enter

a new name. When finished, select done,

press

Ok, and then go to Step 9.

9.~Navigate to the screen that displays the

music you want to put into the playlist.

10.~Use the

buttons to select a track,

and then press the Ok button. A check

appears in the check box on the left side of

the track icon.

11.~Repeat Step 10 to check and select additional

tracks.

12.~To remove a track from the list, move to the

track, and then press the Ok button again.

The check on the track is removed.

13.~When finished, select Add at the top of the

screen, and then press the

Ok button. The

playlist is saved to the USB device and the

Added pop-up appears. Press the Ok button.

playing~a~playlist

1.~Connect the USB device with the playlist to

the home theater's USB port.

2.~Navigate to the playlist (Home screen

;

MULTIMEdIA

;

Storage

;

USB device

;

playlist).

3.~Select the playlist, and then press

Ok. The

Track List screen appears and the first track

of the playlist starts to play.

Editing~a~playlist

1.~While playing a playlist, select Settings(

;

Edit~playlist at the bottom-left corner of

the Track List screen.

2.~Use the

buttons to select a track,

and then press the Ok button. A check mark

appears next to the track.

3.~To cancel a selection, select the track again,

and then press the

Ok button.

✎

To select all tracks at once, use Select~All. To

cancel all selections at once, use deselect~All.

4.~When finished, select delete at the bottom

left of the screen, and then press the

button.

A confirmation pop-up appears.

5.~Select yes, and then press the

Ok button.

✎

Deleting all files included in a playlist will

delete the playlist itself, too.

✎

You can save up to 5 playlists.

36 - English

Playing Content

Ripping

1.~Insert a USB device into the USB jack on the

front of the product. This is the device you

will rip the files to.

2.~Put a music CD into the home theater. In a

few moments, the Track List screen appears.

3.~

On the Track List screen, select Settings()

on the lower left of the screen, and then press

the Ok button. The Settings menu appears.

4.~Use the

buttons to select Ripping, and

then press the Ok button. The Ripping screen

appears.

5.~Use the

buttons to select a track, and

then press the

Ok button. A check appears

to the left of the track.

6.~Repeat Step 5 to select and check additional

tracks.

✎

To select all tracks at once, select Select~All on

the bottom left of the screen, and then press

the Ok button.

7.~To remove a track from the list, move to the

track, and then press the

Ok button again.

The check on the track is removed.

8.~When done, select the Rip button using the

buttons, and then press the

Ok button.

The Rip pop-up appears.

9.~Use the

buttons to select the device to

store the ripped files to, and then press the

Ok button. Ripping begins.

✎

Do not disconnect the device while ripping is

in progress.

10.~If you want to cancel ripping after ripping

has begun, press the

Ok button and then

select yes. Select No to continue ripping.

11.~When ripping is complete, the "Successfully~

Ripped." message appears. Press the

button. The Track List screen reappears.

Using Bluetooth

You can use a Bluetooth device to enjoy music

with high quality stereo sound, all without wires!

What~is~Bluetooth?

Bluetooth is a technology that enables Bluetooth-

compliant devices to interconnect with each other

easily using a short, wireless connection.

A Bluetooth device may hum or malfunction:

When a part of your body is in contact with

the receiving/transmitting system of the

Bluetooth device or the Home Theater.

When it is subject to electrical variation from

obstructions caused by a wall, corner, or

office partitioning.

When it is exposed to electrical interference

from same frequency-band devices including

medical equipment, microwave ovens, and

wireless LANs.

Pair the Home Theater with the Bluetooth

device while the two are close together.

The further the distance is between the Home

Theater and the Bluetooth device, the worse

the quality is.

If the distance exceeds the Bluetooth

operational range, the connection is lost.

In poor reception areas, the Bluetooth

connection may not work properly.

The Home Theater has an effective reception

range of up to 32.8 feet in all directions if

there are no obstacles. The connection will be

automatically cut off if the device is out of this

range. Even within this range, the sound quality

may be degraded by obstacles such as walls or

doors.

This wireless device may cause electrical

interference. during its operation.

37 - English

playing~Content

To~connect~the~Home~Theater~to~a~Bluetooth

device

Connect

Bluetooth~device

Before you begin, confirm that the Bluetooth

device supports the Bluetooth compliant stereo

headset function.

1.~Press the

SOURCE button on the remote

control to display the BT message.

2.~Select the Bluetooth menu on the Bluetooth

device you want to connect. For instructions,

refer to the Bluetooth device's manual.

3.~Select the Stereo headset menu on the

Bluetooth device.

You will see a list of devices.

4.~Select "

[HTS]Hxxxxx

" from the searched list.

When the Home Theater is connected to

the Bluetooth device, the device name of

the connected Bluetooth device, followed

by the name of home theater will appear

on the front display of home theater.

5.~Play music on the connected device.

You can listen to the music playing on the

connected Bluetooth device over the Home

Theater system.

✎

The Home Theater only supports Middle

Quality SBC data (up to 237kbps@48kHz),

and does not support High Quality SBC data

([email protected]).

✎

The AVRCP feature is supported. It's

functionality will differ, depending on the

specifications of the connected device.

✎

Connect only to a Bluetooth device that

supports the A2DP Profile.

✎

Only one Bluetooth device can be paired at a

time.

✎

The search or connection functions may not

work properly in the following cases:

If there a strong electric field near or around

the home theater.

If several Bluetooth devices are simultaneously

paired with product.

If the Bluetooth device is turned off, not in

place, or malfunctions.

Note that such devices as microwave ovens,

wireless LAN adapters, fluorescent lights, and

gas stoves use the same frequency range as

the Bluetooth device, and can cause electric

interference.

✎

For a more reliable connection to a Bluetooth

device or to other devices such as a smart

phone, we recommend you update the

device's software to the most current version.

To~disconnect~the~Bluetooth~device~from~the

~Home~Theater

You can disconnect the Bluetooth device from

the Home Theater. For instructions, refer to the

Bluetooth device's manual.

When the Home Theater is disconnected from

the Bluetooth device, the Home Theater will

display dISCONNECTEd on the front display.

To~disconnect~the~Home~Theater~from~the

Bluetooth~device

Press the (

) button on the front panel of the

Home Theater to switch from BT to another mode

or turn off the Home Theater.

Except when you disconnect the Home Theater

by changing functions, the connected Bluetooth

device will wait a certain time for a response

from the Home Theater before terminating the

connection. (Disconnection time may differ,

depending on the Bluetooth device.)

✎

In Bluetooth connection mode, the Bluetooth

connection will be lost if the distance between

the Home Theater System and the Bluetooth

device exceeds 32.8 feet. When the Bluetooth

device comes back into effective range or

you restart the Bluetooth device, you have

to pair the device and home theater again to

reconnect.

38 - English

Playing Content

✎

In Bluetooth mode, the screen saver will start

if the Bluetooth device stays in the Ready state

for 5 minutes. To reconnect the Bluetooth

device, turn off the screen saver, and then

connect the device. To turn off the screen

saver, press any button on the remote control

(the Volume button, an

buttons, etc.)

Using~Bluetooth~power~On

When the home theater is turned off, connecting

a previously connected smart device to the

product via a Bluetooth connection can turn the

home theater on.

✎

The home theater must be plugged in for

Quick~Start to work.

✎

To use this function, set Settings > System >

Quick~Start to On.

✎

To use this function, the Bluetooth connection

between the Home theater and your smart

device must have been established previously,

and the Home theater must be on your smart

phone's list of known Bluetooth devices.

1.~

Connect your previously connected smart

device to the product via Bluetooth. (For

information on Bluetooth connections, refer

to your smart device’s manual.)

2.~Once connected, the home theater turns

itself on automatically in BT mode.

Select the desired music to play on your

smart device.

Playing Photo Contents

You can play photo contents located on a DVD,

USB, mobile device, or PC.

Using~the~Tools~Menu

While displaying a photo, press the

TOOLS button

on the remote.

Select Settings(

) in the upper right corner of

the screen, and then press the Ok button. The

Tools menu drop down list appears.

Slideshow~Settings

Speed : Select to set a slide show's speed.

Effects : Select to set a slide show's special

effects.

Rotate

Select to rotate the picture. (This will rotate the

picture either clockwise or counter clockwise.)

Zoom

Select to enlarge the current picture. (Enlarge

up to 4 times)

picture~Mode

dynamic

: Choose to increase sharpness.

Standard

: Choose for most viewing

applications.

Movie : This is the best setting for watching

movies.

User : Lets you adjust the sharpness and

noise reduction function respectively.

Background~Music

Select to listen to music while viewing a slide

show.

Equalizer~Mode

Set to On to use the equalizer. Customize your

own personal sound preferences using the

equalizer settings.

Equalizer~Settings

This function is only available when Equalizer~

Mode is On.

Send

Select Send to upload selected files to on-line

sites (Picasa, Facebook, etc.) or to devices.

To use Send~with an on-line site, you need to

establish an account with the on-line site, and

then log in using the Log In function. Send

works essentially the same way for music,

photos, and videos. For general instructions,

see "Using the Send Function" on page 39.

Information

Displays the picture information.

✎

Depending on the disc or storage device, the

Options menu may differ. All options may not

be displayed.

✎

To enable the Background~Music function, the

photo file must be in the same storage media

as the music file. However, the sound quality

can be affected by the bitrate of the MP3

file, the size of the photo, and the encoding

method.

✎

You can't enlarge the subtitle and PG graphic

in the full screen mode.

39 - English

playing~Content

Using~the~Sort~By~and~Options~Menus~

When~the~photo~File~List~is~displayed

Select the Filter(

) function, and then photos to

display photos only.

✎

Even though the product will display folders

that contain all content types, it will only

display files of the content type you selected

For example, if you selected photos, you will

only be able to see photo files.

On the screen that lists the photo files, use the

buttons to select Sort~By or Options in

the upper right, and then press the Ok button.

photos

Sort~By

date~

Groups all the photo files on the media or

storage device by date. Click a group to see

the photos in that group.

Title~

Displays all the photo files on the media or

storage device by title.

Folder

Displays all the folders on the media or

storage device.

Options

Slide~Show~

Starts the slide show. Shows all the files in

the current folder, one after another. If you

want to create a slide show with a selected

group of photos, see Play Selected below.

play~Selected~

play~Selected lets you select specific files to

play. It works essentially the same way for all

media. See "Using Play Selected with Self-

Recorded Media (CDs, USB Devices, etc.)" on

page 34.

Send

Select Send to upload selected files to on line

sites (Picasa, Facebook, etc.) or to devices.

To use Send with an on-line site, you need

to establish an account with the on-line site,

and then log in using the Log In function.

✎

Depending on the disc or storage device, the

Options menu may differ. All options may not

be displayed.

Using~the~Send~Function

1.~Use the

buttons to select Send, and

then press the Ok button. The Selection

screen appears.

2.~Use the

buttons to select a picture, and

then press the

Ok button. A check appears

to the left of the picture.

3.~Repeat Step 2 to select and check additional

pictures.

4.~To remove a picture from the list, move to

the picture, and then press the Ok button

again. The check on the picture is removed.

5.~When done, press the

button to select

Send, and then press the

Ok button. The

Send pop-up appears listing the on-line sites

(Picasa, Facebook, etc.) or devices that you

can send the photos to.

6.~Select a destination, and then press the

button.

7.~If you are sending the photos to an on-line site,

the site starts. Log in and follow the directions

on the screen.

✎

To send photos to an on-line site, you must

have an account with that site.

Listening to the Radio

To listen to the radio, you must connect the

supplied FM antenna.

Operating~the~Radio~with~the~Remote~

Control

1.~Press the

SOURCE button to select FM.

2.~Tune to the desired station.

Preset Tuning 1 : Press the

pRESET button

to select pRESET, and then press the

buttons to select a preset station.

Before you can tune to preset stations,

you must add preset stations to the

product's memory.

Manual Tuning : Press the

pRESET button

to select MANUAL, and then press the

buttons to tune to a lower or higher

frequency.

Automatic Tuning : Press the pRESET

button to select MANUAL, and then press

and hold the

buttons to automatically

search the band.

40 - English

Playing Content

Setting~Mono/Stereo

Press the

ST/MO button.

Each time you press the button, the sound

switches between STEREO and MONO.

In a poor reception area, select MONO for a

clear, interference-free broadcast.

presetting~Stations

Example : Presetting FM 89.10 into memory.

1.~Press the

SOURCE button to select FM.

2.~Press the

buttons to select <89.10>.

3.~Press the MEMORy button.

NUMBER flashes on the display.

4.~Press the

MEMORy button again.

Press the

MEMORy button before

NUMBER disappears from the display on its

own.

After you press the

MEMORy button,

NUMBER disappears from the display and

the station is stored in memory.

5.~To preset another station, repeat steps 2 to 4.

To tune to a preset station, press the

pRESET button to select pRESET, and then

press the

buttons to select the preset

station.

Using the Special Effects Remote

Control Buttons

SOUNd~EFFECT~Function

Lets you select a mode that optimizes the

sound.

1.~Press the

SOUNd~EFFECT button.

2.~ Press the

buttons to select the

desired mode: dSp, virtual~Surround,~SFE~

Mode, or Sports.

3.~ Press the

buttons to select the

desired sound effect.

dSp

Mp3~Enhancer~: Helps enhance your sound

experience (ex. mp3 music). You can

upscale your MP3 level sound (24 kHz, 8bit)

to CD level sound (44.1 kHz, 16bit).

power~Bass~: Increases the volume level of

bass tones and provides thudding sound

effects.

virtual~7.1~: Creates a virtual 7.1 CH sound

using the 5.1 CH speaker system.

Off~: Select for normal listening.

virtual~Surround

You can set a two-channel input source to

produce sound in 5.1 channel surround mode.

SFE~Mode

Symphony~Hall~in~Boston~(Hall~1)~: Provides

a clear vocal as if listening in a concert hall.

philharmonic~Hall~in~Bratislava~(Hall~2)~:

Also provides a clear vocal as if listening in a

concert hall, but less powerful than HALL1.

Jazz~Club~in~Seoul~B~: Recommended setting

for Jazz.

Church~in~Seoul~: Gives the feel of being in a

grand church.

Amphitheater~(Rock)~: Recommended

setting for Rock.

Off~: Select for normal listening.

Sports

Announcer~: Emphasizes the commentator's

voice during a sports game to increase your

absorption in the game.

Stadium~: Emphasizes spectators' cheering

during a sports game to add immediacy.

Off~: Select for normal listening.

dTS~Neo:Fusion~II~/~3d~Sound

You can enjoy more natural and vivid surround

sound with enriched tones by adjusting the

depth of sound using the level options.

dTS~Neo:~Fusion~II~: Off~



~On

3d~Sound~: Off~



~High~



~Low

✎

3d~Sound is not available in FM mode.

✎

The 3d~Sound is displayed only if you

selected Simple~Speaker~Setup > Simple~

Mode.

41 - English

Network~Services

You can enjoy various network services such as

streaming video or on-line apps by connecting the

product to your network.

To use network services, you must first:

1.~Connect the product to a network.

(See page 13)

2.~Configure the network settings.

(See pages 20~23)

Logging In to Your Samsung

Account

Before you access MOvIES~&~Tv~SHOWS or

SAMSUNG~AppS, we suggest you log in to your

Samsung account.

✎

If you do not have a Samsung account, create

one by selecting Create~Account.

To create a Samsung account, follow these steps:

1.~With the Home screen displayed, press the

button. The Sign~In screen appears.

2.~Select the ID field, and then press the

button. The keyboard pop-up appears.

3.~Using the keyboard, enter your e-mail

address. When finished, select the done

button, and then press the

Ok button. The

Sign~In screen re-appears.

4.~Select the Password field, and then press the

Ok button. The keyboard pop-up appears.

5.~Using the keyboard, enter your password.

When finished, select the done button, and

then press the

Ok button. The Sign~In screen

re-appears.

6.~To make the log in process easier next time,

select Sign~me~in~automatically, and then

press the

Ok button.

7.~

Select Sign~In, and then press the

button.

8.~The Samsung~account~Terms~and~Conditions

screen appears.

9.~

Select I~consent, and then press the

button.

10.~Select an image you want to use to identify

your account, and then press the Ok button.

11.~Select done.

✎

If you selected Sign~me~in~automatically,

the next time you log in, the product will

automatically enter your e-mail and password.

All you need to do is select Sign~In.

✎

If you press the button after you have

logged in, the Sign~In screen appears. You

can select Link~Accounts, Edit~profile, Remove~

Account, and Sign~Out.

Adding a Credit Card

To add a credit card to your account, follow these

steps:

1.~Select the

in the upper right of the Home

Screen, and then press the

Ok button. The

Account~Sign~In screen appears.

2.~Sign in to your account if you are not signed

in. The Home Screen reappears. If you are

already signed in, go to Step 4.

3.~Select the

again, and then press the Ok

button. The Account~Sign~In screen appears.

4.~On the Account~Sign~In screen, select Edit~

profile, and then press the

Ok button. The

on-screen keyboard appears.

5.~Enter your account password. When finished,

select done, and then press the

Ok button.

The Edit~profile screen appears.

6.~Select Add~Card, and then press the

button. The Add Card pop-up appears.

7.~Read the Add Card text, and then press the

Ok button. The Add~Card screen appears.

8.~Enter the requested credit card information.

When done, select Save, and then press the

Ok button.

Before Using MOVIES & TV SHOWS

or SAMSUNG APPS

If you haven’t set up Smart Hub, when you use

MOvIES~&~Tv~SHOWS or SAMSUNG~AppS for the

first time, the product will ask you to perform the

Smart Hub set up procedure.

1.~

On the Home screen, select either MOvIES~&~

Tv~SHOWS or SAMSUNG~AppS, and then press

the

button.

2.~If you selected MOvIES~&~Tv~SHOWS, the

Smart Hub pop-up appears asking if you

want to set up Smart Hub. Select yes, and

then press the

Ok button. The Welcome

screen appears.

3.~Select Start, and then press the Ok button.

The Additional~Services~and~Choices screen

appears.

Network Services

42 - English

Network Services

4.~On the Additional~Services~and~Choices

screen, you must review and agree to both

the Smart Hub Terms and Conditions and the

5.~Scroll down, and then click the view~details

buttons to review the full documents.

✎

You do not need to consent to the

Supplemental Privacy Notice, but one or more

Smart TV features or functionalities may not

be available if you do not.

6.~Select I~agree~to~all, and then press the

button. The Setup Complete screen appears.

Press the Ok button.

Using MOVIES & TV SHOWS

Through the MOvIES~&~Tv~SHOWS screen, you

can stream movies and TV shows and watch them

on your TV.

To stream and watch most movies and TV shows,

you need a Samsung account with a registered

credit card. To register a card, see page 41.

✎

Depending on your country, this menu

function may not be supported.

MOVIES & TV SHOWS

NEWLY ADDED

FeaturedMoviesTV ShowsTrailersTrendingFavorites

1.~On the Home screen, select MOvIES~&~Tv~

SHOWS, and then press the Ok button.

2.~

Select one of the Recommended Movies or

TV Shows, and then press the Ok button. The

Information screen for that movie appears.

✎

As you highlight each movie or TV show, the

icons for the apps you can use to stream the

movie or show appear at the bottom of each

movie or show selection icon.

-1

. Alternately, select Favorites, Featured,

Movies,~Tv~Shows,~Trailers or Trending and

then press the Ok button.

On the page that appears, use the

buttons to select a show, movie, or trailer,

and then press the Ok button.

On the Movies~or~Tv~Shows screen, you can

also select What’s~New or Genres to see

more available shows or films. On the Genres

screen, use the

buttons to select a

genre, and then press the

Ok button.

To make a selection on a page displaying

movies or TV shows, use the

buttons to make a selection, and then press

the

Ok button.

3.~If you have downloaded and installed one of

the video streaming apps that you can use

to stream the movie or show, select Watch~

Now, and then press the

Ok button. The

app launches. Follow the directions on the

screen to watch the movie or show you have

chosen. If you have not downloaded one of

the apps, go to Step 4.

4.~If you have not downloaded one of the video

streaming apps, Watch~via appears on the

screen instead of Watch~Now. Select one

of the video streaming apps to the right of

Watch~via, and then press the

Ok Button.

5.~You will be asked if you want to install the

app now. Select Install, press the

Ok button,

and then follow the directions on the screen

to install the app. You can also select view~

details to view information about the app.

The view~details screen lets you download

the app as well.

6.~Once the app is installed, select play, and

then press

Ok to launch the app. Alternately,

you can press the

(

RETURN) button to go

back to the MOvIES~&~Tv~SHOWS screen,

select the show or movie again, and then

follow the directions in Step 3 to watch the

movie or show.

✎

Contents items and the corresponding bottom

menu in MOvIES~&~Tv~SHOWS differ between

countries.

✎

On the each movie or show information

screen, the Watch~Now button is displayed

only after you have download one of the video

streaming apps you can use to stream that

particular movie or show. Watch~via appears if

you have not downloaded the necessary video

streaming app. To the right of Watch~via is a

listing of the video streaming apps you can use

to stream the movie or show. Select an app

icon to download and install the app.

✎

Favorites will not appear unless you have

tagged one or more films or TV shows as a

favorite. To tag a movie or show as a favorite,

select the show. The Detail screen appears.

Select the heart symbol, and then press the

Ok button.

43 - English

Network~Services

Using SAMSUNG APPS

Through the SAMSUNG~AppS screen, you can

download applications from the Internet, and

launch and run downloaded applications on your

TV. To access some applications, you need to have

a Samsung account.

✎

While playing multimedia content in SAMSUNG~

AppS, press and hold

button on the remote

to pause playback. To stop playback, press and

hold

(ExIT) button on the remote.

The~SAMSUNG~AppS~Screen~at~a~Glance

5 6 7 98 10

WebBrowser

1 2

Most PopularWhat's newCategories

RECOMMENDED

MY APPS

SAMSUNG APPS

RECOMMENdEd : Displays recommended

contents managed by Samsung. You

cannot delete Recommended Apps.

My~AppS : Displays your personal gallery

of applications modifiable on the My~

AppS screen.

Most~popular,~What’s~new and Categories

: Select to view and download additional

apps.

The first time you open the SAMSUNG~AppS

screen, the Home theater automatically downloads

a group of free apps. Once these apps have been

downloaded, they appear on the SAMSUNG~

AppS screen. To see additional apps, select Most~

popular, What's~new, or Categories on the bottom

of the screen, and then press the

Ok button.

Most~popular displays the most popular apps,

What's~new the newest. Categories displays a

series of icons representing categories such as

videos, Games, and Sports. Select a category

icon, and then press the Ok button. The Home

theater displays the apps in that category.

downloading~an~App

1.~Select Most~popular, What's~new, or

Categories, and then press the Ok button.

2.~

If you selected Categories, select a category

icon, and then press the

button.

Otherwise, go to Step 3.

✎

On the Most~popular, What's~new, and

Categories screens, a green arrow is displayed

on apps you have already downloaded.

3.~

Select an app you want to download,

and then press the

button. The Detail

Information screen for the App appears.

4.~Select the download button on the screen,

and then press the Ok button. download

changes to Cancel and the app begins to

download.

5.~If you want to cancel the download, select

Cancel, and then press the

Ok button.

6.~When the download is complete, Cancel

changes to play. Select play, and then press

the

Ok button to start the application.

Alternately, press the

(RETURN) button

until the SAMSUNG~AppS screen reappears.

The app you downloaded will be displayed

on the App screen under My~AppS.

Starting~an~Application

1.~Select SAMSUNG~AppS on the Home screen,

and then press the

Ok button.

2.~On the SAMSUNG~AppS screen, use the

buttons to select an app, and then

press the Ok button. The app starts.

The~Option~Menu

The Option menu lets you add apps to and delete

apps from My~AppS. It also lets you change the

position of an app in My~AppS and update apps.

Move

1.~On the My~AppS screen, select the app you

want to move, and then press the Ok button

for 3 seconds. The Option menu appears.

2.~

Select Move, and then press the

button.

3.~Use the

buttons to move the app.

4.~When the app is where you want it, press the

Ok or

(ExIT) button.

44 - English

Network Services

delete

1.~On the My~AppS screen, select the app you

want to delete, and then press the Ok button

for 3 seconds. The Option menu appears.

2.~Select delete, and then press the

button .

3.~Use the

buttons to select Ok, and then

press the Ok button.

Multi~delete

1.~On the My~AppS screen, select an app you

want to delete and then press the Ok button

for 3 seconds. The Options menu appears.

2.~Select the Multi~delete, and then press the

Ok button.

3.~Use the

buttons to select apps you

want to delete, and then press the Ok

button.

4.~Use the

button to select delete, and then

press the

Ok button.

view~detail

1.~On the My~AppS screen, select the app you

want to see detailed information for, and

then press the Ok button for 3 seconds. The

Option menu appears.

2.~Select view~detail, and then press the

button.

Change~view

1.~On the My~AppS screen, select an app, and

then press the Ok button for 3 seconds. The

Option menu appears.

2.~Select Change~view, and then press the

button. If the current view is Most Played,

you will be asked if you want to change to

Custom View. If the current view is Custom

View, you will be asked if you want to

change the view to Most Played. Most Played

sorts the apps by the number of times you

ran each app. Custom View lets you arrange

the apps to your liking.

3.~Select Ok, and then press the

Ok button to

change the view.

Lock/Unlock

Locking an app makes it more difficult to delete

accidently.

1.~On the My~AppS screen, select the app you

want to lock, and then press the

Ok button

for 3 seconds. The Option menu appears.

2.~Select Lock/Unlock, and then press the Ok

button.

3.~The PIN input pop-up appears. Enter your

PIN.

Press and hold the 123 button until the

Num pad appears on the screen. When the

Num pad appears, select a number using the

button and then press the

button.

If you haven't set a PIN, enter the default

PIN: 0000.

4.~

A checkbox appears on each app icon. Use

the

button to move to the app you

want to lock, and then press the Ok button to

select it. A check mark appears on the icon.

5.~Repeat Step 4 to select other apps. Use

Select~All or deselect~All on the bottom of

the screen to select or deselect all apps at

once. To deselect individual apps, select the

app again, and then press the Ok button.

The check mark disappears.

6.~When you have finished marking your

selections, move to Lock~on the bottom of

the screen, and then press the

button.

7.~A lock mark appears on the selected app’s

icon. You will be prompted to enter the PIN

number to delete or unlock a locked app.

Update~Apps

1.~On the My~AppS screen, select any app, and

then press the Ok button for 3 seconds. The

Option menu appears.

2.~Select Update~Apps, and then press the

button.

3.~The Update~Apps screens lists all the apps

that have updates available. Select each app

you want to update, and then press the

button. You can also choose Select~All to

update all the apps listed.

4.~Select Update, and then press the

Ok button.

Screen Mirroring

The Screen~Mirroring function lets you view the

screen of your smart phone or android tablet on

the TV you have connected to the product.

1.~In the Home screen, select Screen~Mirroring,

and then press the

Ok button.

2.~Launch AllShare~Cast or Screen~Mirroring on

your device.

3.~

On your device, find the name of the product

in the list of available devices and then select it.

45 - English

Network~Services

4.~The TV displays a connecting message (for

example, Connecting to Android_92gb...)

and then displays the connected message.

5.~In a few moments, the screen of your device

appears on the TV screen.

6.~To stop Screen~Mirroring, press the

(ExIT) or

(RETURN) button on the remote

control, or exit the Screen~Mirroring function

on your smart phone.

✎

You can connect to a device that supports

AllShare Cast. Note that all devices that have

AllShare Cast may not be fully supported,

depending on the manufacturer. For further

information on mobile connection support,

refer to the manufacturer’s web site.

✎

When you are using the Screen~Mirroring

function, video stuttering or audio dropouts

may occur, depending on your environment.

✎

Bluetooth transmissions can interfere with

the Screen~Mirroring signal. Before using

the Screen~Mirroring function, we strongly

recommend that you turn off the Bluetooth

function on your smart phone or smart device

(tablet, etc.).

Using the Web Browser

You can access the Internet using the Web

Browser application.

1.~Select SAMSUNG~AppS on the Home screen

and then press the

Ok button.

2.~On the SAMSUNG~AppS screen, select

WebBrowser, and then press the

Ok button.

✎

When you run the Web Browser with the

product connected by HDMI to a Bd~Wise

compatible TV - and Bd~Wise is on - the

browser is maximized to fill the screen and the

TV's resolution is set to the optimal resolution

automatically.

✎

The Web Browser is not compatible with Java

applications.

✎

If you attempt to download a file, and the file

cannot be saved, an error message will appear.

✎

E-commerce (purchasing produc ts online) is

not supported.

✎

ActiveX is not supported.

✎

Access may be blocked to some websites or to

web browsers operated by certain businesses.

Link~Browsing~and~pointer~Browsing

The Web Browser provides two types of browsing,

Pointer Browsing and Link Browsing. When you

launch the browser for the first time, Pointer

Browsing is active. If you are using a mouse to

navigate in the Web Browser, we recommend

leaving Pointer Browsing active. With Pointer

Browsing, you move the pointer using the

directional arrow keys on your remote. The pointer

moves freely around the screen, much like the

pointer on a computer when you use a mouse.

With Link Browsing, you use the directional arrow

keys to move a highlight from one link, button, or

entry field to the next. The highlight is restricted

to the links, buttons, and entry fields.

To activate Link Browsing, follow these steps:

1.~Use the

buttons on your remote to

move the pointer to the Link Browser icon on

the top right of the screen. The Link Browser

icon is the third icon from the right.

The pointer will be in the correct position if

the icon turns blue and the words “Link

Browsing” appear on the screen.

2.~Press the

Ok button. Link Browsing is

activated and will remain active whenever

you bring up the Web Browser or until you

change to Pointer Browsing.

The~Control~panel~at~a~Glance

The Control Panel, which runs across the top

of the screen, has a series of icons which start

a number of useful functions. The icons are

described below, starting with the icon on the far

left of the screen.

http://www.samsung.com

100%

46 - English

Network Services

: Moves to the previous page.

: Moves to the next web page.

: Displays the Bookmarks and History

screen. You can bookmark the current page,

select an existing bookmark, and edit and

delete bookmarks. You can also view your

browsing history and select a page to revisit.

: Moves to the Home screen of the Web

Browser.

http://www.samsung.com

: Lets you enter a page

address manually using the keyboard pop-

up.

: Reloads the current page so that it is

refreshed on the screen.

: Adds the current page to your

bookmarks.

: Lets you search for

information by entering words or characters

using the keyboard pop-up. See Using the

Keyboard Popup on this page.

100%

: Lets you enlarge or shrink the screen

by various percentages.

/ : Lets you switch between Pointer

Browsing and Link Browsing.

: Lets you configure the Browser’s settings.

See Using the Setting Menu on page 47.

: Closes the Web Browser.

Using~the~keyboard~pop-up

When you click the

http://www.samsung.com

, the

or access a data or text entry

field, and then press the

Ok button, the keyboard

pop-up appears.

To use the keyboard pop-up with your remote,

follow these steps:

http://www.samsung.com

As you enter characters, recommended text will be shown.

Caps 1 2 3 4 5 6 7 8 9 0 : Clear

q w e r t y u i o p ^ *



123#& a s

@ !

Done

zxcvbnm,.?-



Cancel

100%

ENG

www.



.com



/













1.~Use the

buttons on your remote to

move the highlight to a letter or number of

your choice.

2.~Press the Ok button to enter the letter or

number into the entry field.

3.~To access capital letters, move the highlight

to the Caps key on the top left, and then

press the

Ok button. Press the Ok button

again with the Caps key highlighted to access

small letters again.

4.~To access symbols and additional punctuation

marks, highlight the 123#& button on the

left, and then press the

Ok button.

5.~To delete a character you entered, move the

highlight to the

button, and then press the

Ok button.

6.~To delete all the characters you entered,

move the highlight to the Clear button, and

then press the

Ok button.

7.~When finished entering, move the highlight

to the done button, and then press the

button.

✎

If you have a wireless keyboard connected

to your product, you can use the wireless

keyboard to enter letters, numbers, symbols,

and punctuation. Note that the wireless

keyboard will work only when the keyboard

popup appears and can only be used to enter

letters, numbers, symbols, and punctuation.

Options~on~the~keyboard~pop-Up

To access the keyboard pop-up options, highlight

the

button on the bottom left of the keyboard,

and then press the Ok button.

Language

Select the language for the keyboard. You can

select English, French, Russian, etc.

Recommended~text

The keyboard suggests recommended words as

you enter text. You can turn this function On or

Off.

Reset~recommended~text~data

Reset erases the Samsung Keyboard's memory.

Select Ok to erase everything that the Samsung

Keyboard has learned about your writing style,

including any new words you have used.

47 - English

Network~Services

predict~Next~Letter

The keyboard will predict the next letter as you

enter letters. The predictions appear in a ring

around the letter you have just entered. You

can select a predicted letter or move to another

letter. You can turn this function On or Off.

Accented~Character~preview

Select if you want to type letters with accent

marks.

Using~the~Setting~Menu

The Setting menu contains functions that control

how the Browser operates and Browser security

functions. To open the Setting menu, highlight

the

icon in the Control Panel, and then press

the

button. To select an option in the Setting

menu, highlight the option, and then press the

Ok button.

http://www.samsung.com

Enable Grabbing

Approved Sites

Private Browsing On

Set Search Engine

Web Browser Setting

Help

100%

Enable/disable~Grabbing

Turns the Grabber function on and off. When

the Grabber function is on, you can move a

web page up and down without dragging the

scroll bar. The Grabber function is only available

in Pointer Browsing.

Approved~Sites

Lets you restrict your children’s access to

inappropriate web pages by allowing access

only to the web sites you have registered.

Every time you access this function, the PIN

screen appears. Press and hold the 123 button

until the Num pad appears on the screen.

When the Num pad appears, select a number

using the

button and then press the

Ok button. The first time you access this

function, enter the default PIN, 0000.

You can change the PIN using the Reset

password for the Approved~Sites function. See

below.

Approved~Sites~feature : Turns the Approved~

Sites function on or off.

Reset~password~for~Approved~Sites : Change

the Approved Sites password.

Add~current~site : Lets you add the currently

displayed web site to the Approved Sites list.

Manage~Approved~Sites : Lets you key in

URLs to add to the Approved Sites List and

delete sites from the Approved Sites list. If

you turn this function on and have not added

any sites to the Approved Sites list, you will

not be able to access any Internet sites.

private~Browsing~On/off

Enable or disable the Privacy mode. When the

Privacy mode is enabled, the browser does not

retain the URLs of sites you visit. If you want to

enable Privacy mode, select Ok.

If the Privacy mode is running, the “Stop” icon

appears in front of the URL at the top of the

screen. To disable Privacy mode, select it again

when Privacy mode is enabled.

Set~Search~Engine

You can set the desired Search Engine.

Web~Browser~Setting

Set~as~homepage : You can set the Browser's

home page.

pop-up~Block : Turns the Pop-up Block on

and off.

page~Block : You can determine whether to

block advertisements and select the URLs for

which advertisements are blocked.

General : You can delete personal

information such as website history and

browsing data (cookies, etc.), and reset

all web browser settings to their factory

defaults. You can also set the Security~Mode.

✎

Set the Security~Mode to On to avoid

accessing malicious/phishing sites and

prevent malicious code from running.

Encoding : You can set the Encoding setting

for web pages to Automatic or select the

encoding format manually from a list.

48 - English

Network Services

pointer : You can set the speed of the cursor

when the cursor is set to Pointer Browsing.

Browser~Information : Displays the version

number and copyright information for the

Web Browser.

Help

Provides basic information about the operation

of the Web Browser.

✎

Depending on the web site, some of the

Web~Browser~Setting functions may not be

activated. Functions that are not activated are

greyed out and cannot be used.

Linking your Internet Service

Accounts to the Product

The Link Accounts function lets you link your

product to your accounts with Internet services

such as Pandora so that the product can log you

in to the service automatically when you start the

app for that service.

To create a service account link, follow these

steps:

1.~On the Home screen, select the

button in

the upper right corner, and then press the

button to log in to your Samsung Account.

2.~After you have logged in, select the

button again, and then press the

Ok button.

3.~Select Link~Accounts in the My Account

screen, and then press the

Ok button.

4.~On the Link~Accounts screen, select the

service you want to link to the product, and

then press the

Ok button.

5.~In the ID and Password screen, enter the ID

you use to log in to the service you selected

using the pop-up keyboard. When finished,

select done, and then press the

Ok button.

6.~Repeat the same process for the password.

When finished select done, and then press

the

Ok button.

7.~Select Ok, and then press the

Ok button.

BD-LIVE™

Once the product is connected to your network,

you can enjoy various movie-related service

contents available on BD-LIVE compliant discs.

1.~Attach a USB flash memory to the USB jack

on the front of the product, and then check

its remaining memory. The memory device

must have at least 1GB of free space to

accommodate the BD-LIVE services.

2.~Select Settings on the Home screen, and

then press the Ok button.

3.~Select Network, and then press the

button.

4.~Select Bd-Live~Settings, and then press the

Ok button.

5.~Select Bd~data~Management, and then press

the

Ok button.

6.~Select Select~device, and then press the

button.

7.~Select USB device, and then press the

button.

8.~Insert a Blu-ray Disc that supports BD-LIVE.

9.~Select an item from the list of BD-LIVE service

contents provided by the disc manufacturer.

✎

The way you use BD-LIVE and the provided

contents may differ, depending on the disc

manufacturer.

49 - English

Appendix

Additional Information

Notes

Connections

HdMI~OUT

Certain HDMI output resolutions may not work,

depending on your TV.

You must have an HDMI connection to enjoy

videos with 3D technology.

A long HDMI cable may cause screen noise. If

this occurs, set HdMI~deep~Color to Off in the

menu.

Settings

3d~Settings

For some 3D discs, to stop a movie during 3D

playback, press the

(

ExIT) button once. The

movie stops and the 3D mode option is de-

activated.

To change a 3D option selection when you are

playing a 3D movie, press the

(

ExIT) button

once. The Blu-ray menu appears. Press the

(ExIT) button again, then select 3d~Settings in

the Blu-ray menu.

Depending on the content and the position

of the picture on your TV screen, you may see

vertical black bars on the left side, right side, or

both sides.

Tv~Aspect~Ratio

Depending on the disc type, some aspect ratios

may not be available.

If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen,

the picture might appear to be distorted.

If you select 16:9~Original, your TV may display

4:3~pillarbox (black bars on the sides of the

picture).

Bd~Wise~(Samsung~products~only)

When Bd~Wise is On, the Resolution setting

automatically defaults to Bd~Wise and Bd~Wise

appears in the Resolution menu.

If the product is connected to a device that does

not support Bd~Wise, you cannot use the Bd~

Wise function.

For proper operation of Bd~Wise, set the Bd~

Wise option in both the product and the TV to

On.

digital~Output

Be sure to select the correct digital~Output or

you will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

Digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio

and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

This digital~Output setup does not affect the

analog (L/R) audio or HDMI audio output to

your TV.

It affects the optical and HDMI audio output

when your product is connected to an AV

receiver.

If you play MPEG audio soundtracks, the audio

signal outputs as PCM regardless of your digital~

Output selections (PCM or Bitstream).

digital~Output can be activated when Sound~

Output is set to Tv~Speaker.

Bd-Live~Internet~Connection

The Internet connection may be restricted while

you are using BD-LIVE contents.

Anynet+~(HdMI-CEC)

Depending on your TV, certain HDMI output

resolutions may not work. Please refer to the

user manual of your TV.

This function is not available if the HDMI cable

does not support CEC.

If your Samsung TV has an Anynet+ logo, then it

supports the Anynet+ function.

Bd~data~Management

In the external memory mode, disc playback may

be stopped if you disconnect the USB device in

the middle of playback.

Only those USB devices formatted in the FAT file

system (DOS 8.3 volume label) are supported.

We recommend you use USB devices that

support the USB 2.0 protocol with 4 MB/sec or

faster read/write speeds.

The Resume Play function may not work after

you format the storage device.

The total memory available to Bd~data~

Management may differ, depending on

conditions.

Front~display

You cannot change the brightness of the

button and the vOL +, - button.

Appendix

50 - English

Appendix

Speaker~Settings

When Sound~Output is set to Tv~Speaker, audio

is produced by the TV speakers.

HdMI~audio

When HDMI audio is output to the TV speakers,

it is automatically down-mixed to 2 channels.

Audio~Return~Channel

When Anynet+~(HdMI-CEC) is Off, the Audio~

Return~Channel function is not available.

Using an HDMI cable not certified for

ARC (Audio Return Channel) may cause a

compatibility problem.

The ARC function is only available if an ARC-

compliant TV is connected.

playback

playing~video~files

Video files with high bitrates of 20Mbps or more

strain the product’s capabilities and may stop

playing during playback.

Selecting~the~Audio~Language

The

indicator will not appear on the screen

if the BONUSVIEW section does not contain any

BONUSVIEW audio settings.

The languages available through the Audio

Language function depend on the languages

that are encoded on the disc. This function or

certain languages may not be available.

Some Blu-ray Discs may allow you to select

either the PCM or Dolby Digital audio English

soundtrack.

Selecting~the~Subtitle~Language

Depending on the Blu-ray Disc/DVD, you may be

able to change the subtitle language in the Disc

Menu. Press the

dISC~MENU button.

This function depends on the selection of

subtitles that are encoded on the disc and may

not be available on all Blu-ray Discs/DVDs.

Information about the main feature BONUSVIEW

mode will also appear if the Blu-ray Disc has a

BONUSVIEW section.

This function changes both the primary and

secondary subtitles at the same time.

The total number of primary and secondary

subtitles, respectively, is displayed.

playing~JpEG~files

You can’t enlarge the subtitle and PG graphics in

the full screen mode.

playing~Content

Using~the~

TOOLS~button~while~playing~back~

pictures

If the home theater is connected to a BD Wise

compliant TV that has Bd~Wise~On, the picture~

Settings menu will not appear.

The Background~Music function will not work

unless the music file and the photo file are

located on the same storage media. Also, sound

quality can be impacted by the bitrate of the

MP3 music file, the size of the photos, and the

encoding method.

Disk and Format Compatibility

disc~types~and~content~your~product~

can~play

Mediadisc~Typedetails

VIDEO

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R

disc recorded in the BD-

RE format.

DVD-VIDEO,

DVD-RW,

DVD-R,

DVD+RW,

DVD+R

DVD-VIDEO, recorded

DVD+RW/DVD-

RW(V)/DVD-R/+R

discs that have been

recorded and finalized,

or a USB storage media

containing MKV, MP4

contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-

RW/-R, DVD-RW/-R,

BD-RE/-R discs or a

USB storage media

containing MP3 or WMA

contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on

CD-RW/-R, DVD-

RW/-R, BD-RE/-R

discs or a USB storage

media containing JPEG

contents.

51 - English

Appendix

✎

The product may not play certain CD-RW/-R and

DVD-R because of the disc type or recording

conditions.

✎

If a DVD-RW/-R disc has not been recorded

properly in DVD video format, it will not be

playable.

✎

Your product will not play content that has been

recorded on a DVD-R at a bitrate that exceeds 10

Mbps.

✎

Your product will not play content that has been

recorded on a BD-R or USB device at a bitrate that

exceeds 30 Mbps.

✎

Playback may not work for some types of discs, or

when you use specific operations, such as angle

change and aspect ratio adjustment. Information

about the discs is written in detail on the disc box.

Please refer to this if necessary.

✎

When you play a BD-J title, loading may take longer

than a normal title or some functions may perform

slowly.

disc~Types~your~product~cannot~play

HD DVD

DVD-ROM/PD/MV-Disc,

etc

DVD-RW(VR mode)

CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio only,

not graphics.)

DVD-RAM

Super Audio CD

(except CD layer)

3.9 GB DVD-R Disc for

Authoring.

✎

This product may not respond to all operating

commands because some Blu-ray Disc, DVD, and

CD discs allow specific or limited operation and

provide only certain features during playback.

Please note that this is not a defect in the

product.

✎

Samsung cannot guarantee that this product

will play every disc bearing the Blu-ray Disc,

DVD, or CD logo because disc formats evolve,

and problems and errors may occur during the

creation of Blu-ray Disc, DVD, and CD software

and/or the manufacture of discs.

✎

Please contact the SAMSUNG Customer Care

Center at 1-800-726-7864 if you have questions

or encounter difficulty when playing Blu-ray Discs,

DVD, or CD discs in this product. Also, refer to the

rest of this user manual for additional information

on playback restrictions.

✎

Some commercial discs and DVD discs purchased

outside your region may not play on this product.

Logos~of~discs~the~product~can~play

Blu-ray Disc3D Blu-ray Disc

BD-LIVEDolby

DTS

Java

NTSC broadcast system

in U.S.A, Canada, Korea,

Japan

Region~Code

Both products and discs are coded by region. These

regional codes must match for a disc to play. If the

codes do not match, the disc will not play.

The Region Number for this product is displayed on

the rear panel of the product.

disc~Type

Region~

Code

Area

Blu-ray~

disc

North America, Central

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central

and South Asia.

52 - English

Appendix

dvd-

vIdEO

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle

East, Egypt, Africa, Greenland

Taiwan, Korea, the

Philippines, Indonesia, Hong

Kong

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

Russia, Eastern Europe, India,

North Korea, Mongolia

China

✎

If the Region number of a Blu-ray Disc/DVD

does not correspond to the Region number of

this product, the product cannot play the disc.

AvCHd~(Advanced~video~Codec~High~

definition)

This product can play back AVCHD format discs.

These discs are normally recorded and used in

camcorders.

The AVCHD format is a high definition digital video

camera format.

The MPEG-4 AVC/H.264 format compresses images

with greater efficiency than the conventional

image compressing format.

Some AVCHD discs use the “x.v.Color” format. This

product can play back AVCHD discs that use the

“x.v.Color” format.

“x.v.Color” is a trademark of Sony Corporation.

“AVCHD” and the AVCHD logo are trademarks of

Matsushita Electronic Industrial Co., Ltd. and Sony

Corporation.

✎

Some AVCHD format discs may not play,

depending on the recording conditions.

✎

AVCHD format discs need to be finalized.

✎

“x.v.Color” offers a wider color range than normal

DVD camcorder discs.

✎

Some MKV and MP4 format discs may not play,

depending on their video resolution and frame

rate.

Supported~Formats

Notes~on~the~USB~connection

Your product supports USB storage media, MP3

players, digital cameras, and USB card readers.

The product does not support folder or file names

longer than 128 characters.

Some USB/digital camera devices may not be

compatible with the product.

Your product supports the FAT 16, FAT 32, and

NTFS file systems.

Connect USB devices directly to the product’s USB

port. Connecting through a USB cable may cause

compatibility problems.

Inserting more than one memory device into a

multi-card reader may cause the reader to operate

improperly.

The product does not support the PTP (Peer to

Peer) protocol.

Do not disconnect a USB device while it is

transferring or recording data.

The bigger the image resolution, the longer the

image takes to display.

This product cannot play MP3 files with DRM

(Digital Rights Management) downloaded from

commercial sites.

Your product only supports video that is under

30fps (frame rate).

Your product only supports USB Mass Storage Class

(MSC) devices such as thumb drives and USB HDD.

(HUB is not supported.)

Certain USB HDD Devices, multi-card readers and

thumb drives may not be compatible with this

product.

If some USB devices require excessive power, they

may be limited by the circuit safety device.

If playback from a USB HDD is unstable, provide

additional power by plugging the HDD into a wall

socket. If the problem continues, contact the USB

HDD manufacturer.

SAMSUNG is not responsible for any data file

damage or data loss.

53 - English

Appendix

video~File~Support

File~

Extension

Containervideo~CodecResolution

Frame~rate~

(fps)

Bitrate~~

(Mbps)

Audio~Codec

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.mov

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

*.mov

*.flv

*.vob

*.svi

*.m2ts

*.mts

*.divx

*.ps

AVI

MKV

ASF

MP4

3GP

MOV

FLV

VRO

VOB

SVAF

MVC

1920x1080

24/25/3060

AC3

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

DD+

MPEG(MP3)

DTS

(Core, LBR)

Motion JPEG

FHD :

MAX 30

HD :

MAX 60

H.264 BP/MP/HP

Divx 3.11 / 4 / 5 / 6

MPEG4 SP/ASP

Window Media Video

v9(VC1)

AVS

MPEG2

MPEG1

Microsoft MPEG-4 v3

1280x720

MAX 30

Window Media Video

v7(WMV1), v8(WMV2)

H 263 Sorrenson

720x576

Microsoft MPEG-4 v1, v2

VP6640x480

6~304

*.webm

WebMVP81920x1080

6~3020Vorbis

*.rmvb

RMVBRV8/9/10 (RV30/40)1920x1080

6~3020RealAudio 6

Limitations

Files are not supported if there are some issues

with contents among the supported codecs listed

above.

Normal playback is not guaranteed if the file's

container information is wrong or the file itself is

corrupted.

Sound or video play may cutoff for contents with

bitrate/frame rates that are above standard.

The seek (skip) function is not available if the file's

index table is damaged.

Depending on your network status, play may

become disrupted when playing contents from the

network.

Some USB/Digital camera devices may not be

compatible with the product.

RMVB format is supported in China and Hong

Kong only

AVS codec is supported for contents for China only

*.ps extension is supported for contents for China

only

DivX codec is not supported for contents in the US

video~decoder

Supports up to H.264 Level 4.1 (except for

FMO/ASO/RS)

Does not support VC1 AP L4

Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6

Below 1280 X 720: 60 frame max

Above 1280 X 720: 30 frame max

Does not support GMC 2 or higher

Supports SVAF Top/Bottom, Side by Side, Left/Right

view sequence type(2 ES) Only

Supports BD MVC Spec Only

Audio~decoder

Supports WMA 10 Pro (Up to 5.1)

Does not support WMA lossless audio.

Supports M2 profile

ReadlAudio 10 lossless is not supported for

contents for China and Hong Kong

Does not support QCELP, AMR NB/WB

vorbis : Supported up to 5.1 channel

DD+ : Supported up to 7.1ch

DTS LBR codec is supported in MKV/MP4/TS

containers only

54 - English

Appendix

Music~File~Support

File~ExtensionTypeCodecComments

*.mp3

MPEG

MPEG1 Audio Layer 3-

*.m4a

*.mpa

*.aac

MPEG4

AAC-

*.flac

FLAC

FLACSupports up to 2ch

*.ogg

OGG

VorbisSupports up to 2ch

*.wma

WMA

Supports WMA 10 Pro (Up to 5.1)

Does not support WMA lossless audio

Supports up to M2 profile

*.wav

wav

wav-

*.mid

*.midi

midi

type 0 and type 1

Seek not supported

Supported on USB only

*.ape

ape

apeNonSmart not supported

*.aif

*.aiff

AIFF

AIFF-

*.m4a

ALAC

ALAC-

picture~File~Support

File~ExtensionTypeResolutionComments

*.jpg

*.jpeg

JPEG

15360x8640-

*.png

PNG

4096x4096-

*.bmp

BMP

4096x4096-

*.mpo

MPO

15360x8640-

55 - English

Appendix

digital~Output~Selections

SetuppCM

Bitstream~~

(Unprocessed)

Bitstream~~

(Re-encoded~dTS)

Bitstream~

~(Re-encoded~

dolby~d)

ConnectionHdMI~supported~Av~receiver

Audio

Stream on

Blu-ray Disc

PCMUp to PCM 7.1chPCM

DTS re-encoded

Re-encoded

Dolby Digital *

Dolby

Digital

Up to PCM 5.1chDolby Digital

Dolby

Digital Plus

Up to PCM 7.1ch

Dolby Digital Plus

Dolby

TrueHD

Dolby TrueHD

DTSDTS

DTS-

HD High

Resolution

Audio

DTS-HD High

Resolution Audio

DTS-HD

Master

Audio

DTS-HD Master

Audio

Stream on

DVD

PCMPCM 2ch

Dolby

Digital

Up to PCM 5.1chDolby Digital

DTSUp to PCM 7.1chDTS

Definition

for Blu-ray

Disc

Any

Decodes the main

feature audio

and BONUSVIEW

audio stream

together into PCM

audio and adds

Navigation Sound

Effects.

Outputs only the

main feature audio

stream so that your

AV receiver can

decode the audio

bitstream.

You will not hear

BONUSVIEW audio

or Navigation

Sound Effects.

Decodes the main

feature audio

and BONUSVIEW

audio stream

together into PCM

audio and adds

Navigation Sound

Effects, then re-

encodes the PCM

audio into DTS

bitstream.

Decodes the main

feature audio

and BONUSVIEW

audio stream

together into PCM

audio and adds

Navigation Sound

Effects, then re-

encodes the PCM

audio into Dolby

Digital bitstream or

PCM.

If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.

Blu-ray Discs may include three audio streams :

Main Feature Audio : The audio soundtrack of the main feature.

BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may

sound. Navigation Sound Effects are different on each Blu-ray Disc.

56 - English

Appendix

Resolution~according~to~the~output~mode

Blu-ray~disc/E-contents/digital~Contents~playbackdvd~playback

Output

Setup~

HdMI~Mode

Blu-ray~disc

E-contents/~

digital~contents

BD Wise

Resolution of Blu-ray

Disc

1080p@60F480i

AutoMax. Resolution of TV inputMax. Resolution of TV input

1080p@60F1080p@60F1080p@60F

Movie Frame : Auto (24Fs)1080p@24F-

1080i1080i1080i

720p720p720p

480p480p480p

✎

If the TV you connected to the product does not support Movie Frame or the resolution you selected, the

message "If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous

resolution. Do you want to change the resolution?" appears. If you select Yes, the TV's screen will go to

blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.

✎

If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold

the

button on the top of the product for more than 5 seconds. All settings are restored to the factory

default. Run the Initial Settings procedure again. Then, go to Settings > picture > Resolution in the Menu,

and select the correct resolution for your TV.

✎

When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format)

only. Resetting does not affect your network settings, so you should be able to skip Network Setup and

Software Update.

✎

When the factory default settings are restored, all stored user BD data will be deleted.

✎

The Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24Fs) mode.

Troubleshooting

Refer to the table below when this product does not function properly. If the problem you are experiencing is

not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and

contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).

SymptomCheck/Remedy

you~cannot~eject~the~disc.

Is the power cord plugged securely into the outlet?

Turn off the power, and then turn it back on.

playback~does~not~start.

Check the region number of the Blu-ray/DVD disc.

Blu-ray/DVD disc purchased from abroad may not be playable.

CD-ROMs and DVD-ROMs cannot be played on this product.

Make sure that the rating level is correct.

57 - English

Appendix

SymptomCheck/Remedy

playback~does~not~start~~

immediately~when~you

press~the~

~button.

Are you using a deformed disc or a disc with scratches on the surface?

Wipe the disc clean.

No~sound.

The home theater does not play sound during fast playback, slow playback,

and step motion playback.

Are the speakers connected properly? Is the speaker setup correctly

customized?

Is the disc severely damaged?

you~can~only~hear~sound~

from~a~few~speakers,~but~

not~all~6.

On certain Blu-ray/DVD discs, sound is output from the front speakers only.

Check if the speakers are connected properly.

Adjust the volume.

When playing audio from a CD, the radio, or a TV, the unit outputs sound to

the front speakers only.

dolby~digital~5.1~CH~

Surround~Sound~is~not~

produced.

Is there "Dolby Digital 5.1 CH" marked on the disc? Dolby Digital 5.1 CH

Surround Sound is produced only if the disc is recorded with 5.1 channel

sound.

Is the audio language correctly set to Dolby Digital 5.1-CH in the information

display?

The~remote~control~does~

not~work.

Are you operating the remote within its operational range and within the

proper angle relative to the sensor?

Are the batteries drained?

The~disc~is~rotating~but~

there~is~no~picture.

picture~quality~is~poor~

and~the~picture~is~

shaking.

Is the TV power on?

Are the video cables connected properly?

Is the disc dirty or damaged?

A poorly manufactured disc may not be playable.

Audio~language~and~

subtitles~do~not~work.

The Audio Language and subtitle functions will not work if the disc does not

contain them.

The~menu~screen~does~not~

appear~even~when~you~

select~the~menu~function.

Are you using a disc that does not contain menus?

The~aspect~ratio~cannot~be~

changed.

You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box

mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3

mode only. Refer to the Blu-ray Disc jacket, and then select the appropriate

function.

The~product~is~not~

working.~~

(Example:~The~power~

goes~off~or~you~hear~a~

strange~noise.)

The~product~is~not~

working~normally.

Press and hold the remote control's

(

ExIT) button for 5 seconds in

STANDBY mode. This will reset the unit.

Using the RESET function will erase all stored settings.

Do not use this function unless necessary.

58 - English

Appendix

SymptomCheck/Remedy

you~have~forgotten~the~

rating~level~password.

With no disc in the product, press and hold the product's

button for

longer than 5 seconds. INIT appears on the display and all settings will return

to their default values.

Using the RESET function will erase all stored settings.

Do not use this function unless necessary.

Can't~receive~radio~

broadcasts.

Is the antenna connected properly?

If the antenna's input signal is weak, install an external FM antenna in an

area with good reception.

While~listening~to~Tv~audio~

through~the~product,~there~

is~no~sound.

If you press the OpEN/CLOSE

button while listening to TV audio using the

D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and

the TV audio is muted.

"Not~Available"~appears~on~

screen.

The features or action cannot be completed at this time because:

1. The Blu-ray/DVD disc's software restricts it.

2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is out of

range.

If~the~HdMI~output~is~set~to~

a~resolution~your~Tv~cannot~

support~(for~example,~

1080p),~you~may~not~see~a~

picture~on~your~Tv.

Press and hold the

button on front panel for more than 5 seconds with no

disc in the product. All settings will revert to their factory settings.

No~HdMI~output.

Check the connection between the TV and the HDMI jack of the product.

Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.

Abnormal~HdMI~output~

appears~on~the~screen.

If random noise appears on the screen, it means that TV does not support

HDCP (High-bandwidth Digital Content Protection).

AllShare~function

you~can~see~folders~shared~

through~AllShare,~but~

cannot~see~the~files.

AllShare only shows Video, Photo, and Music files. Other types of files are

not displayed.

video~plays~intermittently.

Check if the network is stable.

Check if the network cable is properly connected and if the network is

overloaded.

The wireless connection between the DLNA compatible device and the

product is unstable.

Check the connection.

59 - English

Appendix

SymptomCheck/Remedy

The~AllShare~connection~

between~the~product~and~

pC~is~unstable.

IP addresses under the same subnetwork should be unique, otherwise IP

collision can results in such a phenomenon.

Check if you have a firewall enabled.

If so, disable the firewall function.

Bd-LIvE

The~home~theater~cannot~

connect~to~the~Bd-LIvE~

server.

Test whether the network connection is active by using the Network Status

function.

Check whether a USB memory device is connected to the product.

The memory device must have at least 1GB of free space to accommodate

the BD-LIVE service.

You can check the available size in Bd~data~Management. (See page 49)

See if the Bd-Live~Internet~Connection option is set to Allow(All).

If all above fails, contact the contents provider or update to the latest

firmware.

When~using~the~Bd-LIvE~

service,~an~error~occurs.

The USB memory device must have at least 1GB of free space to

accommodate the BD-LIVE service.

You can check the available size in Bd~data~Management. (See page 49)

✎

When the factory default settings are restored, all stored user BD data is deleted.

Repairs

If you contact us to repair your product, an administration fee may be charged if either:

1.~An engineer is called out to your home at your request and there is no defect in the product.

2.~You bring the unit to a repair center and there is no defect in the product.

We will provide you with the amount of the administration fee before we make a home visit or begin any work

on your product.

We recommend you read this manually thoroughly, search for a solution on line at www.samsung.

com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your

product.

60 - English

Appendix

Specifications

General

Power RequirementsAC 110-120V ~ 50/60Hz

Power Consumption72.5 W

Weight5.1 Ibs

Dimensions16.9 (W) x 2.2 (H) x 9.9 (D) inches

Operating Temperature Range+41°F to +95°F

Operating Humidity Range10 % to 75 %

FM Tuner

Signal/noise ratio55 dB

Usable sensitivity12 dB

Total harmonic distortion0.5 %

HDMI

Video1080p, 1080i, 720p, 480p

AudioPCM multichannel audio, Bitstream audio, PCM audio

Amplifier

Front speaker output165W x 2 (3Ω)

Center speaker output170W (3Ω)

Surround speaker output165W x 2 (3Ω)

Subwoofer speaker output170W (3Ω)

Frequency response

Analog input : 20Hz~20kHz (±3dB)

Digital input : 20Hz~40kHz (±4dB)

S/N Ratio70dB

Channel separation60dB

Input sensitivity(AUX) 500mV

Speaker (5.1ch speaker system)

Speaker

system

ImpedanceFrequency range

Output

sound

pressure level

Rated

input

Maximum

input

Dimensions

(W x H x D) (inches)

Weights

(Ibs)

Front

3 Ω

140Hz~ 20kHz87dB/W/M

165W330W

3.7 x 11.0 x 4.03.85

Surround3.7 x 5.9 x 4.01.41

Center

170W340W

12.6 x 3.2 x 4.02.25

Subwoofer40Hz ~ 160Hz88dB/W/M6.6 x 13.8 x 11.47.52

Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

Weight and dimensions are approximate.

Design and specifications are subject to change without prior notice.

Dispose unwanted electronics through an approved recycler.

To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877)

278 - 0799

SWA-6000

Power RequirementsAC 120V ~60Hz

Power Consumption50 W

Weight2.52 lbs

Dimensions (W x H x D)

inches

3.0 x 9.0 x 6.0

Operating Temperature Range+41°F to +95°F

Operating Humidity Range10% ~ 75%

Output165W x 2 CH

Frequency range20Hz~20KHz

S/N Ratio65dB

61 - English

Appendix

Licenses

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured

under license from DTS Licensing Limited. DTS, DTS-HD,

the Symbol, DTS and the Symbol together, & DTS-HD and

the Symbol together are registered trademarks of DTS, Inc. DTS-HD Master Audio | Essential and DTS Neo:Fusion

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo

are trademarks or registered trademarks of HDMI Licensing LLC in the United States

and other countries.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be

trademarks of their respective owners.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual

property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced

film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message

will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at

http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your

mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA."

This product incorporates proprietary technology under license from Verance Corporation and is protected

by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and

trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation.

is prohibited.

- Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product menu.

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original

carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in

materials and workmanship for a limited warranty period of:

One~(1)~year~parts~and~Labor*~

(*90~days~parts~and~Labor~for~Commercial~Use)

This limited warranty begins on the original date of purchase, and is valid only on products purchased and

used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem

determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized

service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG

or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the

responsibility of the purchaser.

SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or

reconditioned parts or products if found to be defective during the limited warranty period specified above.

All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.

Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is

longer.

SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG

brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software

products, if provided, are on an "AS IS" basis.

Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and

except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and

shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and

installation; applications and uses for which this product was not intended; altered product or serial numbers;

cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature;

use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations,

repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product

or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and

failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered

and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion

related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not

warrant uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO

WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS

WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY

PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG.

SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR

OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE

USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE

CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR

SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE

OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE

FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER

AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE

OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE

OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL

PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of

incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty

gives you specific legal rights, and you may also have other rights which vary from state to state.

To obtain warranty service, please contact SAMSUNG customer care center.

The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an

authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS

PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION

MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/

peaceofmind/authorized_resellers.html.

AH68-02684A-02

QUESTIONS OR COMMENTS?

COUNTRy~CALL~OR~vISIT~US~ONLINE~AT~WRITE

IN THE US

1-800-SAMSUNG

(726-7864)

www.samsung.com/us/

support

Samsung Electronics America, Inc. 85

Challenger Road Ridgefield Park, NJ

07660

AH68-02684A-02

Samsung Ht-h6500wm/za Home Theater System

Product's Documents

User Manual

Specifications

Samsung HT-H6500WM Questions and Answers